Electron Backscattered Diffraction of Transgranular Crack Propagation in Soft Steel

We consider the crack propagation in a soft steel sheet during the formation. The drawability is considered in relation with the structural anisotropy, the mechanical behaviour is related to both the grain morphology and the texture. The structure heterogeneity could lead to the apparition of micro-cracks. The results show the texture effect on the crack propagation and on the crack arrest in soft steel during the formation. The EBSD technique allows to show that the adjustment of the grain orientation from the initial main component {111}（112） towards the deformation orientation {111}（110） incites a trans-granular crack through a grain with initial {111}（112） orientation in a globally ductile material. It is the presence of grains with {111}（110） orientation which permits the closing of micro-cracks.     

A model for growth directional features in silicon nanowires

Long silicon nanowires (SiNWs) grown by laser ablation or by thermal evaporation of monoxide source materials are primarily oriented in the <112> direction, and some in the <110> direction, but rarely in the <100> or <111> directions. We propose a model to explain these SiNW growth directional features. The model consists of two parts. Part one is concerned with mechanism-based criteria and part two with applying these criteria to explain the experimental results. Four criteria are considered: (i) the stability of a Si atom occupying a surface site; (ii) the Si {111} surface stability in the presence of oxygen; (iii) the stepped Si {111} surface layer lateral growth process; and (iv) the effect of dislocations in providing perpetuating {111} steps to facilitate SiNW growth. Analyses of SiNW growth in accordance with these criteria showed that <112> and <110> are the preferred SiNW growth directions, and that <111> and <100> are not. Received: 12 November 2001 / Accepted: 20 November 2001 / Published online: 23 January 2002     

Growth study of indium-catalyzed silicon nanowires by plasma enhanced chemical vapor deposition

Indium was used as a catalyst for the synthesis of silicon nanowires in a plasma enhanced chemical vapor deposition reactor. In order to foster the catalytic activity of indium, the indium droplets had to be exposed to a hydrogen plasma prior to nanowire growth in a silane plasma. The structure of the nanowires was investigated as a function of the growth conditions by electron microscopy and Raman spectroscopy. The nanowires were found to crystallize along the <111>, <112> or <001> growth direction. When growing on the <112> and <111> directions, they revealed a similar crystal quality and the presence of a high density of twins along the {111} planes. The high density and periodicity of these twins lead to the formation of hexagonal domains inside the cubic structure. The corresponding Raman signature was found to be a peak at 495 cm⁻¹, in agreement with previous studies. Finally, electron energy loss spectroscopy indicates an occasional migration of indium during growth.     

沿〈111〉晶向冲击加载下铜中纳米孔洞增长的塑性机制研究

 用分子动力学方法计算模拟了沿〈111〉晶向冲击加载过程中，单晶铜中纳米孔洞（直径约1.3 nm）的演化及其周围区域发生塑性变形的过程。模拟结果表明，在沿〈111〉晶向冲击加载后，在面心立方（fcc）结构中的4族{111}晶面中有3族发生了滑移。伴随孔洞的增长，在所激活的3族{111}晶面上，观察到位错在孔洞表面附近区域成核，然后向外滑移，其中在剪切应力最大的〈112〉方向上，其位错速度超过横波声速，其它〈112〉方向的位错速度低于横波声速。模拟得到的位错阻尼系数范围与实验值基本符合。由于孔洞周围产生的滑移在空间比较对称，孔洞增长形貌接近球形。在恒定的冲击强度下，孔洞半径增长速率近似保持恒定，其速率随着冲击强度的增加而增大。     

Wave velocities in shock-compressed cubic and hexagonal single crystals above the elastic limit

When solids are subjected to high-pressure shock-wave loading, multiple stress waves propagate with velocities dependent upon the elastic and inelastic compressibilities of the solid. The present paper shows that the inelastic or plastic waves in cubic and hexagonal single crystals do not necessarily propagate with the bulk sound speed as they do in isotropic elastic-plastic solids. This result is a consequence of anisotropy in the plastic deformation which depends on the slip plane orientation in the crystal and has important consequences with regard to the determination of compressibilities from shock-wave data. In particular, for wave propagation in the <110> directions of cubic crystals the departure from the bulk velocity can be significant (5–25 per cent). For wave propagation normal to the c-axis in hexagonal crystals, the plastic wave velocity also differs from the bulk sound speed (10–25 per cent). Plastic wave velocities are tabulated for a number of cubic crystals on the basis of the various slip systems common to these materials. The calculated velocities are then compared with experimental data on shock-loaded single-crystal aluminum and sodium chloride.     

Molecular dynamics study of thermal stress and heat propagation in tungsten under thermal shock

Using molecular dynamics （MD） simulation, we study the thermal shock behavior of tungsten （W）, which has been used for the plasma facing material （PFM） of tokamaks. The thermo-elastic stress wave, corresponding to the collective displacement of atoms, is analyzed with the Lagrangian atomic stress method, of which the reliability is also analyzed. The stress wave velocity corresponds to the speed of sound in the material, which is not dependent on the thermal shock energy. The peak pressure of a normal stress wave increases with the increase of thermal shock energy. We analyze the temperature evolution of the thermal shock region according to the Fourier transformation. It can be seen that the “obvious” velocity of heat propagation is less than the velocity of the stress wave; further, that the thermo-elastic stress wave may contribute little to the transport of kinetic energy. The heat propagation can be described properly by the heat conduction equation. These results may be useful for understanding the process of the thermal shock of tungsten.     

Stress dependent kinetics of electron-hole drops in uniaxially deformed silicon

The decay of electron-hole drops in silicon is studied as a function of uniaxial stress applied along the <111 > and <100 > crystallographic directions. For <111 > stress, the decay kinetics can be explained in terms of Auger recombination. In contrast, for <100 > stress, the experimental decay is consistent with a model of free exciton evaporation from droplets rather than Auger recombination.     

Dynamics evolution of shock waves in laser–material interaction

In this work, the dynamics and internal structure of shock waves in picosecond laser–material interaction are explored at the atomistic level. The pressure of the shock wave, its propagation, and interaction zone thickness between the plume and ambience are evaluated to study the effect of the laser absorption depth, ambient pressure, and laser fluence. Sound agreement is observed between the MD simulation and theoretical prediction of shock wave propagation and mass velocity. Due to the strong constraint from the compressed ambient gas, it is observed that the ablated plume could stop moving forward and mix with the ambient gas, or move backward to the target surface, leading to surface redeposition. Under smaller laser absorption depth, lower ambient pressure, or higher laser fluence, the shock wave will propagate faster and have a thicker interaction zone between the target and ambient gas.     

Shock wave propagation in gases under subatmospheric pressure

In the present paper the results of the experiments on the shock wave dynamics under subatmospheric pressure in neutral gases are presented. The characteristics of spherical and plane configuration shock wave excitation and propagation are studied in the pressure region 1 torr<p<760 torr. It is shown that whenp=3 torr it is still possible to fix successfully the shock wave appearance and propagation in various neutral gases. The pressure dependence of the shock wave propagation velocity and amplitude is determined experimentally. It is shown that when the pressure decreases the shock wave amplitude decreases and an increase of the Mach number takes place. In the case of plane shock wave the Mach number reaches the valueM=5.2 under the pressurep=3 torr.     

Pulsed fm NMR/on studies of single crystal54MnNi and125SbFe

Precision field shift studies of B_appl-8T using pulsed FM NMR/ON along hard directions (eg <100>⁵⁴MnNi, <112>¹²⁵SbFe and the easy axis (<111>⁵⁴MnNi, <100>¹²⁵SbFe) yield no measurable Knight shifts within the uncertainty allowed by current accuracy of the nuclear moments. This is in striking contrast to earlier measurements with the same apparatus that yielded K=+1.5 (4)% for⁶⁰CoFe. The modulation frequency dependences of the pulsed FMNMR/ON signals are investigated for a variety of rf parameters and compared with model predictions.     

Growth of iron single crystals in the etched ion tracks of polymer foils

Pulse reverse electrolysis in an ultrasonic field is used to grow iron single crystals of micron size in templates formed by etching the tracks of swift ions in polymer foils. High-grade crystals are produced from high-temperature ferrous chloride baths. The crystals are oriented along their <110>, <100>, and <111> crystallographic axes. Their orientation turns out to depend on supersaturation during the growing process. At low overvoltages of deposition, <110> and <100> orientations are observed. The crystals of <111> orientation appear more frequently at higher cathode pulse current density. The crystals possess prominent resistance to corrosion. Received: 20 February 2001 / Accepted: 21 February 2001 / Published online: 3 May 2001     

TEM and photoluminescence characterization of porous-silicon layers from <111>-oriented p + silicon substrates

Summary A first structural investigation, carried out by transmission electron microscopy on porous-silicon samples fromp ⁺, <111>-oriented substrates is presented. The samples, which show intense visible room temperature luminescence, are composed by an interconnected network of crystalline nanostructures. Evidences of the pores propagation along the <100> directions are provided. The optical and morphological characteristics of the investigated samples are found to be much similar to those of samples coming fromp-type, non-degenerate, <100>-oriented substrates rather than those obtained from <100> substrates with comparable resistivity. This striking effect is explained by invoking different etch-limiting mechanisms during pore formation. Their relative weights are proposed to depend on the crystallographic orientation of the silicon specimen subjected to etching. Paper presented at the III INSEL (Incontro Nazionale sul Silicio Emettitore di Luce), Torino, 12–13 October 1995.     

Microstructural investigations of Y2O3 thin films deposited by laser ablation on MgO

The epitaxial relationships and the microstructure of thin Y₂O₃ film, in situ grown by laser ablation at 700 °C under 0.5 mbar oxygen pressure on MgO substrate, are studied by X-ray and HRTEM investigations. X-ray φ-scanexperiments show that Y₂O₃ exhibits two different crystallographic growing directions <111> and <100> on (100) single-crystalline MgO substrate. The <111> growing direction appears with four different epitaxial relationships where the <110> Y₂O₃ in-plane direction is parallel to the <110> in-plane direction of MgO. The <100> growing direction appears with one epitaxial relationship, cube Y₂O₃ on cube MgO. The HRTEM experiments show the columnar aspect of the Y₂O₃ thin film. Both (111) and (100) Y₂O₃-oriented grains are observed in good agreement with the X-ray experiments. Received: 16 May 2000 / Accepted: 22 May 2000 / Published online: 13 September 2000     

二氧化硅气凝胶的防爆震性能及机理研究

利用聚偏二氟乙烯压电传感器研究了爆炸加载下冲击波在二氧化硅气凝胶中的传播特性,并对冲击波在二氧化硅气凝胶和泡沫铝中的传播特性进行了比较.结果表明:在二氧化硅气凝胶中冲击波的强度随传播距离的增加呈现指数衰减的趋势.冲击波在二氧化硅气凝胶中衰减比在泡沫铝中衰减明显.由于二氧化硅气凝胶内部特殊的纳米多孔网状结构,导致冲击波在二氧化硅气凝胶中的衰减效果较好.冲击波在二氧化硅气凝胶中的传播速度极低,因此冲击波在二氧化硅气凝胶中传播时卸载波的追赶卸载效应非常明显,这又进一步促进了冲击波的衰减.     

冲击压缩下非均质脆性固体的弛豫破坏研究

通过平板冲击实验研究了富含微缺陷的非均质脆性固体的冲击压缩响应特性.选取“强角闪石化橄榄二辉岩”作为样品材料，利用激光速度干涉仪测量样品后自由面的速度历史，在冲击加载应力远低于样品材料Hugoniot弹性极限的条件下，观测到了表征破坏波出现的再加载信号，并且该破坏波的速度远大于玻璃中破坏波的速度，以接近于冲击波的速度在样品内向前传播，其形成机理与玻璃样品中的破坏机理不同，称之为“就位扩展机理”.采用同一冲击加载应力(～3.9GPa)作用于不同厚度的样品,获得了破坏波穿过样品的运动过程，确定出样品中破坏波的轨迹线近似为一条不过原点的直线，相应的产生此破坏波的弛豫时间约为0.5 μs.     

Impulsive fracture of silicon by elastic surface pulses with shocks

During nonlinear evolution of surface acoustic waves (SAWs) stress increases with propagation, and may cause fracture of brittle materials. This effect was used to evaluate the strength of crystalline silicon with respect to impulsive load in the nanosecond time scale without using seed cracks. Short SAW pulses propagating in the [11(macro)2] direction on the Si(111) plane induce fracture at significantly lower SAW amplitudes than the mirror symmetric wave propagating in the [112(macro)] direction. This effect is explained by the differences in elastic nonlinearity of the two propagation directions.     

Shock wave structure in dense gases

The internal structure of a shock wave front in a gas is studied by molecular dynamics (MD) simulation. A new approach to MD shock simulation is used, which enables one to consider a stationary shock front at rest and radically improves the quality of simulation. The profiles of flow variables and their fluctuations are calculated. The evolution of the velocity distribution function across the shock layer is calculated and compared with the bimodal distribution. The pair distribution function in the shock layer is determined. The surface tension associated with the shock wave is estimated. Pis’ma Zh. éksp. Teor. Fiz. 66, No. 2, 91–96 (25 July 1997)     

Orientation dependence in molecular dynamics simulations of shocked single crystals

We use multimillion-atom molecular dynamics simulations to study shock wave propagation in fcc crystals. As shown recently, shock waves along the <100> direction form intersecting stacking faults by slippage along 111 close-packed planes at sufficiently high shock strengths. We find even more interesting behavior of shocks propagating in other low-index directions: for the <111> case, an elastic precursor separates the shock front from the slipped (plastic) region. Shock waves along the <110> direction generate a leading solitary wave train, followed (at sufficiently high shock speeds) by an elastic precursor, and then a region of complex plastic deformation.     

Generation and detection of superstrong shock waves during ablation of an aluminum surface by intense femtosecond laser pulses

Superstrong shock waves of multimegabar level generated during ablation of an aluminum surface by intense (<1 PW/cm²) femtosecond laser pulses have been detected by observing the propagation of a shock wave in air from the ablated surface to a broadband piezoelectric receiver. The estimated initial pressure and velocity of the shock wave (ablation plume) agree well with data obtained earlier by various methods for shock waves propagating inside ablated targets.     

Stress dependence of electron-hole liquid parameters in silicon

The electron-hole liquid recombination luminescence in silicon is studied as a function of stress up to corresponding valence band splittings of 30 meV for <100>- and <111>-stress directions. EHL densities and exchange-correlation energies as obtained from lineshape fits are in general agreement with recent theoretical data. Systematic deviations in detail, however, indicate that - contrary to simplifying theoretical assumptions - a band structure dependence of the exchange and correlation energy E_xc has to be taken into account.