Waveguide resonance of subwavelength metallic slits

The transmission characteristics of a metallic film with subwavelength periodic slits are investigated by using the two-dimensional finite-difference time-domain method (2D-FDTD). Two models are constructed to show the dependance of the transmission spectrum on the slit structure. A sandwiched structure is used to exhibit the contribution of the metallic wall inside slits to the extraordinary high transmission. And a filled slit structure is employed to reflect the relation between the average refractive index inside the slits and the transmission spectrum of the structure. The transmission characteristics of two structures can be explained well with the waveguide resonance theory.     

Experimental and calculated research on a large band gap constituting of tubes with periodic narrow slits

A new band gap structure composed of a square array of parallel steel tubes with narrow slits is presented. The propagation of acoustic waves in a two-dimensional composite medium constituted of slit tubes in air is investigated both theoretically and experimentally. The band gap is calculated with the finite element method in which the acoustic-solid coupling is taken into account. The transmissions of the band system with both different single-width narrow slits and multi-width narrow slits are analyzed. Experimental measurements show that the transmission through an array of slit tubes with periodic narrow slits drops to noise level throughout frequency interval in good agreement with the calculated forbidden band. The large band gap and low starting frequency is obtained by arranging different width of slits embedded in the tubes. The experiments and theoretical results show that this new band gap structure has an especial character based on the resonant cavity playing an important role on the band gap besides the traditional Bragg interference.     

介质覆层下金属周期结构变化对TE波异常透射特性的影响

根据金属光栅结构变化对TE波异常透射特性影响的研究需要,建立了相应的模型。应用时域有限差分(FDTD)方法分别计算了单缝结构、多缝结构、不同宽度和不同周期等结构下的透射分布特征。研究发现添加凹槽会对金属表面能量的传递起阻碍作用。透射频域宽度随薄膜宽度增加而增加。随着狭缝宽度的增加,透射率分布曲线包络线趋于平坦,主透射峰短波长侧透射曲线分布基本不变,而主透射峰及其长波长侧的透射曲线分布变宽。这说明宽度的变化影响了表面共振模式,从而影响透射的分布。单个狭缝的透射与多周期结构相比,透射率曲线几乎重合,表明狭缝对表面模式没有调制作用,各狭缝的透射相对独立。     

Soller slit design and characteristics

For X‐ray absorption spectroscopy, either in transmission mode with concentrated samples or for dilute samples in fluorescence mode, it is advantageous to improve the signal‐to‐noise ratio by implementing a slit apparatus. Several investigations into the improvement of measurements when slits and filters are employed have been reported; however, these have always been for a particular design and are not transferable between dissimilar systems. A generalized approach to Soller slit design will be presented which enables a target level of noise rejection to be achieved by varying the number, size and placement of the filter and Soller slit assembly. A procedure for determining the reduction in efficiency of the Soller slits with respect to misalignment with the sample will also be discussed.     

Influence of slit width on the electromagnetic transmission of a periodic metallic grating

The light transmittance of a periodic metallic grating with varied slit widths has been investigated. The transmission peaks move to the shorter wavelength direction with an increase in the width of slits while keeping the other parameters unchanged. It was demonstrated that the slit width affects the spectral transmittance of the metal grating significantly. It was also found that the effective refractive index and cavity modes in slits are responsible for this phenomenon. Cavity modes play an important role in extraordinary transmission of the sub-wavelength aperture grating. When a complete resonant mode forms in the slits, a high transmission will appear. A wider slit results in a smaller efficient refractive index and thus affects the cavity mode in the slits. These two elements cause the transmission peaks to move to the shorter wavelength direction with widening of slits. The results obtained here may provide a useful guide to design metallic slit grating devices.     

Transmission through array of subwavelength metallic slits curved with a single step or mutli-step

The transmission of normally incident plane wave through an array of subwavelength metallic slits curved with a sin- gle step or mutli-step has been explored theoretically. The transmission spectrum is simulated by using the finite-difference time-domain method. The influences of surface plasmon polaritons make the end of finite long sub-wavelength metallic slit behaves as magnetic-reflecting barrier. The electromagnetic fields in the subwavelength metallic slits are the superpo- sition of standing wave and traveling wave. The standing electromagnetic oscillation behaves like LC oscillating circuit to decide the resonance wavelength. Therefore, the parameters of adding step may change the LC circuit and influence the transmission wavelength. A new explanation model is proposed in which the resonant wavelength is decided by four factors： the changed length for electric field, the changed length for magnetic field, the effective coefficient of capacitance, and the effective coefficient of inductance. The effect of adding step is presented to analyze the interaction of two steps in slit with mutli-step. This explanation model has been proved by the transmission through arrayed subwavelength metallic slits curved with two steps and fractal steps. All calculated results are well explained by our proposed model.     

Enhanced optical transmission by V-shaped nanoslit in metal film

In this paper,we reveal that the enhanced transmission through a perforated metal film can be further boosted up by a V-shaped nanoslit,which consists of two connected oblique slits.The maximum transmission at resonance can be enhanced significantly by 71.5%in comparison with the corresponding vertical slit with the same exit width.The value and position of transmission resonance peak strongly depend on the apex angle of the V-shaped slit.The optimum apex angle,at which the transmission is maximal,is sensitive to the slit width.Such phenomena can be well explained by a concrete picture in which the incident wave drives free electrons on the slit walls.Moreover,we also simply analyze the splitting of the transmission peak in the symmetry broken V-shaped slit,originating from the resonances of different parts of the V-shaped slit.We expect that our findings will be used to design the nanoscale light sources based on the metal nanoslit structures.     

Optical transmission through an interface between subwavelength slits

This paper studies optical transmission through an interface between two slits with different widths in a sheet composed of an ideal conductor. Such a structure is of potential use in fabricating optical diode and may be the simplest one compared to other designs. Our calculations show that there is a critical wavelength. When the light wavelength is below the critical wavelength, the transmissivity is unidirectional. The expression of the stable transmissivity as a function of the ratio of the widths of the two slits was obtained analytically. Particularly, at the critical wavelength, the transmissivities are zero. This phenomenon has great potential for application in the manufacture of wavelength blockers.     

Plasmon-assisted two-slit transmission: Young's experiment revisited

We present an experimental and theoretical study of the optical transmission of a thin metal screen perforated by two subwavelength slits, separated by many optical wavelengths. The total intensity of the far-field double-slit pattern is shown to be reduced or enhanced as a function of the wavelength of the incident light beam. This modulation is attributed to an interference phenomenon at each of the slits, instead of at the detector. The interference arises as a consequence of the excitation of surface plasmons propagating from one slit to the other.     

内嵌矩形腔楔形金属狭缝的增强透射

金属薄膜上亚波长金属狭缝的非共振光增强透射对宽频带光子器件的设计具有重要意义. 为增强金属狭缝的光透射, 设计了内嵌矩形腔楔形金属狭缝阵列, 并用有限元方法研究了该结构的透射特性. 结果表明, 内嵌矩形腔的楔形金属狭缝阵列比无矩形腔的楔形金属狭缝阵列透射率高. 此外, 还研究了矩形腔的结构参数和位置对内嵌矩形腔楔形金属狭缝阵列透射特性的影响. 这些结果将对设计具有更高透射能力的金属狭缝具有一定的指导意义. 关键词： 光异常透射 金属狭缝 表面等离极化激元     

基于厚金属狭缝阵列的表面等离子激元光刻

提出一种利用厚金属狭缝阵列耦合激发表面等离子激元制作非周期图形的纳米光刻模型.采用时域有限差分电磁场模拟仿真软件研究了厚金属狭缝阵列中表面等离子激元的激发、模式选择以及光刻胶中的光场分布.结果表明,通过优化厚金属狭缝阵列结构参量和匹配介质参量可有效抑制表面等离子激元在光栅狭缝出口处的发散,增加表面等离子激元的穿透深度,...     

基于厚金属狭缝阵列的表面等离子激元光刻

提出一种利用厚金属狭缝阵列耦合激发表面等离子激元制作非周期图形的纳米光刻模型.采用时域有限差分电磁场模拟仿真软件研究了厚金属狭缝阵列中表面等离子激元的激发、模式选择以及光刻胶中的光场分布.结果表明,通过优化厚金属狭缝阵列结构参量和匹配介质参量可有效抑制表面等离子激元在光栅狭缝出口处的发散,增加表面等离子激元的穿透深度,可获得高分辨率的较大曝光深度的周期和非周期纳米图形,可为纳米激光直写技术提供有益的借鉴.     

Resonant transmission of microwaves through a narrow metallic slit

Strong resonant transmission of microwave radiation through a very narrow (much less than the radiation wavelength) metallic slit is recorded. The results show that a set of resonant self-coupled surface plasmons are excited within the small gap, giving a Fabry-Pérot-like behavior in accord with analytical results published earlier [Y. Takakura, Phys. Rev. Lett. 86, 5601 (2001)]. The metallic slit, formed by two thick metal plates spaced apart by tens of microns, is inserted in a wavelength-sized aperture. On resonance the transmissivity through the metal slit is more than 2 orders of magnitude greater than the radiation impinging on the slit area.     

Influence of grooves in the electromagnetic transmission of a periodic metallic grating filter

The light transmittance of metal film with periodic slits and grooves structure has been investigated. It was demonstrated that the grooves significantly affect the transmittance of the metal film. The structure excavating two grooves symmetric to the central slit in a cell of a period grating displays a dent in the transmission spectrum comparing with the structure with only one slit in the cell. Deepening the grooves moves the dents to the longer wavelengths in the transmission spectrum. An analytical equation is also provided to approximately locate the dents. The grooves in the grating filter supply the advantage of removing the needless transmission of certain frequency.     

Ultra-elongated depth of focus of plasmonic lenses with concentric elliptical slits under Gaussian beam illumination

In this paper, we discuss the influence of ratio of minor to major axis on the propagation property and focusing performance of a plasmonic lens with variant periodic concentric elliptical slits illuminating under a Gaussian beam. In order to analyse the influence theoretically, a finite-difference time-domain （FDTD） numerical algorithm is adopted for the computational numerical calculation and the design of the plasmonic structure. The structure is flanked with penetrated slits through a 200-nm metal film （Au） which is coated on a quartz substrate. Tunability of focusing capability of the plasmonic lenses is studied by tailoring the ratio. Our calculation results demonstrate that the ratio of the elliptical slits greatly affects the focusing capability of the lense. The plasmonic lenses with concentric elliptical slits illuminating under a Gaussian beam have ultra-elongated depth of focus. These results are very encouraging for the future study of the plasmonic lens-based applications.     

Optical transmission through metal/dielectric multilayer films perforated with periodic subwavelength slits

The transmission of p-polarized plane wave through Ag/SiO₂ multilayer films perforated with periodic subwavelength air slits is investigated by using the finite-difference time-domain (FDTD) method. The results show that the optical transmission property is mediated by the interference among the propagating coupled-SPP modes along the lateral direction inside the SiO₂ layers and the conditions of Fabry-Pérot-like resonance along the longitudinal direction together. When some geometric parameters are suitably initialized, the high transmission peaks can split into more peaks as the functional layer (metal/dielectric/metal sandwich stack) number increases, and the wavelength of the same-order transmission peak exhibits a red shift as the grating period increases.     

Making metals transparent for white light by spoof surface plasmons

From first-principles computations we reveal that metallic gratings consisting of narrow slits may become transparent for extremely broad bandwidths under oblique incidence. This phenomenon can be explained by a concrete picture in which the incident wave drives free electrons on the conducting surfaces and part of the slit walls to form spoof surface plasmons (SSPs). The SSPs then propagate on the slit walls but are abruptly discontinued by the bottom edges to form oscillating charges that emit the transmitted wave. This picture explicitly demonstrates the conversion between light and SSPs and indicates clear guidelines for enhancing SSP excitation and propagation. Making structured metals transparent may lead to a variety of applications.     

Comparison of the sensitivity of extraordinary transmittance peaks with the surrounding media for hole and slit arrays

In this paper we compare the sensitivity of the Extraordinary Transmittance (ET) peak position with the surrounding media for two types of metallic structures: arrays of holes and arrays of slits recorded in Au films. Both types of array were fabricated using Interference Lithography (IL) with a period of 700 nm and an Au thickness of 150 nm. The transmission spectra measurements were performed at normal incidence using a spectrophotometer. The results show that an array of slits presents a higher sensitivity for the surrounding media than the array of holes. Theoretical TE and TM simulations of the transmission spectra for the slit arrays agree very well with the experimental results, confirming the better sensitivity of the slit arrays.     

Fabrication and testing of a newly designed slit system for depth‐resolved X‐ray diffraction measurements

A new system of slits called `spiderweb slits' have been developed for depth‐resolved powder or polycrystalline X‐ray diffraction measurements. The slits act on diffracted X‐rays to select a particular gauge volume of sample, while absorbing diffracted X‐rays from outside of this volume. Although the slit geometry is to some extent similar to that of previously developed conical slits or spiral slits, this new design has advantages over the previous ones in use for complex heterogeneous materials and in situ and operando diffraction measurements. For example, the slits can measure a majority of any diffraction cone for any polycrystalline material, over a continuous range of diffraction angles, and work for X‐ray energies of tens to hundreds of kiloelectronvolts. The design is generated and optimized using ray‐tracing simulations, and fabricated through laser micromachining. The first prototype was successfully tested at the X17A beamline at the National Synchrotron Light Source, and shows similar performance to simulations, demonstrating gauge volume selection for standard powders, for all diffraction peaks over angles of 2–10°. A similar, but improved, design will be implemented at the X‐ray Powder Diffraction beamline at the National Synchrotron Light Source II.