Encapsulation of Co3O4 Nanoparticles Inside CeO2 Nanotubes: An Efficient Biocatalyst for the Ultrasensitive Detection of Ascorbic Acid

A quick and sensitive detection of ascorbic acid (AA) is essential in the fields of biosensing and disease diagnosis. In this work, an effective approach combined with electrospinning, chemical bath deposition, and calcination process is developed to encapsulate Co₃O₄ nanoparticle into CeO₂ nanotubes as efficient peroxidase mimics for the detection of AA. The peroxidase‐like catalytic activity of the as‐prepared Co₃O₄@CeO₂ nanotubes is much higher than that of individual Co₃O₄ nanofibers and CeO₂ nanotubes alone due to the synergistic effect between the two components. Owing to the superior catalytic efficiency of the prepared Co₃O₄@CeO₂ nanotubes, a colorimetric route for the rapid and accurate detection of AA with a detection limit of 0.73 × 10⁻⁹m with a wide linear range from 0 to 0.8 × 10⁻⁶m is demonstrated. This detection limit is much better than the previous reports based on the enzyme‐like catalytic systems. In addition, a good selectivity toward the detection of AA over amino acids, common ions, dopamine, and uric acid is achieved. This study offers a new approach for the fabrication of Co₃O₄@CeO₂ nanotubes as sensing platform toward the detection of AA, which presents promising potential applications in biosensing, environmental monitoring, and medical diagnostics.     

Sonochemical synthesis and anchoring of zinc oxide on hemin-mediated multiwalled carbon nanotubes-cellulose nanocomposite for ultra-sensitive biosensing of H2O2

In this work, the metal oxide and biopolymer nanocomposites on multiwalled carbon nanotubes (MWCNT) were prepared using a simple sonochemical method. The hexagonal nanorods of zinc oxide (ZnO NR) were synthesized by probe sonication (frequency = 20 kHz, amplitude = 50) method and were integrated on ultrasonically functionalized MWCNT-cellulose nanocrystals (MWCNT-CNC) for the first time. The stable hemin bio-composites also were prepared using the bath sonication (37 kHz of frequency, 150 W of power) method, and was used for the selective and ultrasensitive electrochemical detection of H₂O₂. The UV–Vis spectroscopy studies confirmed the presence of native hemin on MWCNT-CNC/ZnO NR nanocomposite. Cyclic voltammetry studies revealed that an enhanced redox electrochemical behaviour of hemin was observed on hemin immobilised MWCNT-CNC/ZnO NR nanocomposite than that of other hemin modified electrodes. Also, the MWCNT-CNC/ZnO NR/hemin modified SPCE showed 2.3 folds higher electrocatalytic activity with a lower reduction potential (−0.2 V) towards H₂O₂ than that of other investigated hemin modified electrodes including hemin/MWCNT and hemin/CNC-ZnO. The fabricated biosensor displayed a stable amperometric response (-0.2 V vs Ag/AgCl) in the linear concentration of H₂O₂ ranging up to 4183.3 µM with a lower detection limit of 4.0 nM.     

Green sonochemical synthesis and fabrication of cubic MnFe2O4 electrocatalyst decorated carbon nitride nanohybrid for neurotransmitter detection in serum samples

The binary nanomaterials and graphitic carbon based hybrid has been developed as an important porous nanomaterial for fabricating electrode with applications in non-enzymatic (bio) sensors. We report a fast synthesis of bimetal oxide particles of nano-sized manganese ferrite (MnFe₂O₄) decorated on graphitic carbon nitride (GCN) via a high-intensity ultrasonic irradiation method for C (30 kHz and 70 W/cm²). The nanocomposites were analyzed by powder X-ray diffraction, XPS, EDS, TEM to ascertain the effects of synthesis parameters on structure, and morphology. The MnFe₂O₄/GCN modified electrode demonstrated superior electrocatalytic activity toward the neurotransmitter (5-hydroxytryptamine) detection with a high peak intensity at +0.21 V. The appealing application of the MnFe₂O₄/GCN/GCE as neurotransmitter sensors is presented and a possible sensing mechanism is analyzed. The constructed electrochemical sensor for the detection of 5-hydroxytryptamine (STN) showed a wide working range (0.1–522.6 μM), high sensitivity (19.377 μA μM⁻¹ cm⁻²), and nano-molar detection limit (3.1 nM). Moreover, it is worth noting that the MnFe₂O₄/GCN not only enhanced activity and also promoted the electron transfer rate towards STN detection. The proposed sensor was analyzed for its real-time applications to the detection of STN in rat brain serum, and human blood serum in good satisfactory results was obtained. The results showed promising reproducibility, repeatability, and high stability for neurotransmitter detection in biological samples.     

Ultrasonic-assisted hydrothermal synthesis of cobalt oxide/nitrogen-doped graphene oxide hybrid as oxygen reduction reaction catalyst for Al-air battery

A persistent ultrasound-assisted hydrothermal method has been developed to prepare cobalt oxide incorporated nitrogen-doped graphene (Co₃O₄/N-GO) hybrids. The electrochemical behaviors and catalytic activity of the prepared hybrids have been systematically investigated as cathode materials for Al-air battery. The results show that ultrasonication can promote the yield ratio of Co₃O₄ from 63.1% to 70.6%. The prepared Co₃O₄/N-GO hybrid with ultrasonication exhibits better ORR activity over that without ultrasonication. The assembled Al-air battery using the ultrasonicated Co₃O₄/N-GO hybrid exhibited an average working voltage of 1.02 V in 4 M KOH electrolyte at 60 mA∙cm⁻², approximately 60 mV higher than that using hybrid without ultrasonication. This should be attributed to large number density of fine Co₃O₄ particles growing on the dispersed GO sheets under the persistent ultrasonication. The related ultrasonic mechanism has been discussed in details.     

Facile method to prepare stable superhydrophobic Co3O4 surface

A facile and novel method was developed to fabricate rough Co₃O₄ surface with hierarchical micro- and nanostructures by the combination of simple solid state reactions and coating process. After modification with stearic acid, a superhydrophobic surface with water contact angle of 155 ± 1.8° and sliding angle of 2° was obtained. The superhydrophobic Co₃O₄ surface remained superhydrophobic property in a wide pH range from 3 to 14. The superhydrophobic Co₃O₄ surface also showed excellent self-cleaning property and high stability in ambient environments.     

Characteristics of high sensitivity ethanol gas sensors based on nanostructured spinel Zn1−xCoxAl2O4

Nanocrystalline powders of Zn_1−xCo_xAl₂O₄ (x = 0, 0.2, 0.4, 0.6, 0.8, 1.0) mixed oxides, with cubic spinel structure were successfully prepared by the ethylene glycol mediated citrate sol-gel method. The structure and crystal phase of the powders were characterized by X-ray diffraction (XRD) and microstructure by transmission electron microscopy (TEM). X-ray diffraction results showed that the samples were in single phase with the space group Fd-3m. TEM analysis showed that the powders with spherical shape were uniform in particle size of about 17-24 nm with mesoporous in nature. Further investigations were carried out by FT-IR. Thick films of as-prepared Zn_1−xCo_xAl₂O₄ powders were fabricated using screen-printing technique. The response of Zn_1−xCo_xAl₂O₄ based thick films towards different reducing gases (liquefied petroleum gas, hydrogen, hydrogen sulfide, ethanol gas and ammonia) was investigated. The sensor response largely depends on the composition, temperature and the test gas species. The Co (cobalt) content has a considerable influence on the gas-sensing properties of Zn_1−xCo_xAl₂O₄. Especially, Zn_0.4Co_0.6Al₂O₄ composition exhibited high response with better selectivity to 100 ppm C₂H₅OH gas at 150 °C. The instant response (∼7 s) and fast recovery (∼16 s) are the main features of this sensor.     

Synergistic effect of Cr2O3 and Co3O4 nanocomposite electrode for high performance supercapacitor applications

The fabrication of high performance supercapacitor electrodes has been greatly investigated for future high power storage applications. In this present work, chromium oxide-cobalt oxide based nanocomposite (Cr₂O₃–Co₃O₄ NC) was synthesized using the hydrothermal approach. Moreover, the cyclic voltammetry (CV) study reveals the Cr₂O₃–Co₃O₄ NC delivers a high specific capacitance of 619.4 F/g at 10 mV/s. The electrochemical impedance spectra (EIS) of Cr₂O₃–Co₃O₄ NC possess the solution resistance (R_s) and charge transfer resistance (R_ct) of 0.68 Ω and 0.03 Ω respectively. The Galvanostatic charge-discharge (GCD) analysis demonstrated the prolonged charge-discharge time and good rate capability of the Cr₂O₃–Co₃O₄ NC. The cyclic stability of Cr₂O₃–Co₃O₄ NC delivers superior capacitive retention of 83% even after 2000 cycles. The asymmetric supercapacitor (ASC) device based on Cr₂O₃–Co₃O₄//AC yielded an energy density of 4.3 Wh/kg at the corresponding power density of 200 W/kg. Furthermore, the ASC delivers superior cyclic stability of 74.8% even after 1000 consecutive charge-discharge cycles.     

Synthesis and electrocatalytic activities of Co<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocubes

In this article, a hydrothermal method was developed to synthesize Co₃O₄ nanocubes using hydrogen peroxide (H₂O₂) as oxidant, Co(NO₃)₂·6H₂O as a cobalt source. The products are characterized in detail by multiform techniques including X-ray diffraction (XRD), energy dispersive X-ray analysis (EDS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The results show that the obtained products are Co₃O₄ nanocubes with size ranging between 20 and 40 nm. The effects of the hydrogen peroxide concentration on the size of the products have been studied. The electrocatalytic activities of H₂O₂ reduction on Co₃O₄ nanocubes in phosphate buffer were also evaluated.     

Electrochemical supercapacitor studies of hierarchical structured Co2+-substituted SnO2 nanoparticles by a hydrothermal method

Hierarchical structured Co-doped SnO₂ nanoparticles are prepared by a low temperature hydrothermal process. The structural and surface morphologies of the SnO₂ and Sn_1?xCo_xO₂ nanoparticles are studied by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The Sn_1?xCo_xO₂ nanoparticles form with a tetragonal rutile structure during the hydrothermal process without further calcination. The pseudocapacitance behavior of the Sn_1?xCo_xO₂ nanoparticles is characterized by cyclic voltammetry (CV) in 1.0 M H₂SO₄ electrolyte. The specific capacitance (SC) is found to increase with an increase in cobalt content. A maximum SC of 840 F g^?1 is obtained for a Sn_0.96Co_0.04O₂ composite at a 10 mV s^?1 scan rate.     

Organic acid assisted solid-state synthesis of Li1.2Ni0.16Co0.08Mn0.56O2 nanoparticles as lithium ion battery cathodes

Lithium-rich layered oxide Li_1.2Ni_0.16Co_0.08Mn_0.56O₂ can be referred as a crystalline mixture of Li₂MnO₃ and LiNi_0.4Co_0.2Mn_0.4O₂ at equal molar ratio. In the paper, the solid state reaction of M(AC)₂·4H₂O (M = Mn, Co and Ni) and LiOH·H₂O has been performed to obtain nanocrystalline Li_1.2Ni_0.16Co_0.08Mn_0.56O₂ using a small molecular organic acid (i.e., oxalic acid (OA), citric acid (CA) or tartaric acid (TA)) as additive. The introduction of organic acids can help to improve the layered structure and inhibit the particle growth of Li_1.2Ni_0.16Co_0.08Mn_0.56O₂, and the different organic acids exert distinct influences on the structural and electrochemical properties of Li_1.2Ni_0.16Co_0.08Mn_0.56O₂. In detail, the nanoparticles obtained in the presence of OA have the smallest average size of 50–150 nm, which correspondingly exhibit the highest initial discharge capacity of 267.52 mAh g⁻¹ at 0.1C and the best high-rate capability (e.g., 152.22 mAh g⁻¹, 5C) when applied as a lithium ion battery cathode. Furthermore, the active substance obtained from TA shows the best cycling stability and a discharge capacity of 202.42 mAh g⁻¹ can be retained after 50 cycles at 0.5C.     

A-deficit LSCF for intermediate temperature solid oxide fuel cells

A-deficit La_0.54Sr_0.44Co_0.2Fe_0.8O_3 ? δ cathode material for intermediate temperature solid oxide fuel cells (IT-SOFCs) was synthesized by a citrate complexation (Pechini) route. Using La_0.54Sr_0.44Co_0.2Fe_0.8O_3 ? δ as cathode material, a superior cell performance with the maximum power density of 309, 470 and 855 mW cm^? 2 at 600, 650 and 700 °C was achieved, in contrast with the maximum power density of 266, 354 and 589 mW cm^? 2 using conventional La_0.6Sr_0.4Co_0.2Fe_0.8O_3 ? δ as cathode material at the same temperatures. The reason of this improvement was analyzed on the basis of defect chemistry. Thermal shrinkage experiment testified that the oxygen vacancies in La_0.54Sr_0.44Co_0.2Fe_0.8O_3 ? δ are more mobile than in La_0.6Sr_0.4Co_0.2Fe_0.8O_3 ? δ. Furthermore, theoretical calculation in terms of their composition and the shift of peak position in XRD pattern showed that the concentration of oxygen vacancies of La_0.54Sr_0.44Co_0.2Fe_0.8O_3 ? δ is higher than that of La_0.6Sr_0.4Co_0.2Fe_0.8O_3 ? δ. Therefore, the oxygen ion conductivity via vacancies transfer mechanism is enhanced, which induces the polarization resistance of La_0.54Sr_0.44Co_0.2Fe_0.8O_3 ? δ being decreased with a result of cell performance improved.     

A chemical strategy to control the shape of oxide nanoparticles

A new strategy, epoxide-assisted precipitation route presented in this work, allows the shape control synthesis of Co₃O₄ nanoparticles. The shape of the nanoparticles is determined by the nature of the precursor cobalt salts (Co(NO₃)₂ · 6H₂O, CoCl₂ · 6H₂O) used for the preparation of the particles. The different reaction dynamics of the two salts in ethanolic and aqueous solutions with propylene oxide result in precursor particles with different structures, which lead to the formation of oxide nanoparticles with different shapes during the heat treatment. Spherical particles of about 20 nm are obtained from the ethanolic solution of Co(NO₃)₂ · 6H₂O; cubic-shaped particles of about 30 nm can be prepared from the ethanolic solution of CoCl₂ · 6H₂O; whereas platelet-like particles of more than 100 nm are synthesized from the aqueous solution of the mixture of Co(NO₃)₂ · 6H₂O and CoCl₂ · 6H₂O.     

Effects of Ca doping on the electrochemical properties of LiNi0.8Co0.2O2 cathode material

LiNi_0.8Co_0.2O₂ and Ca-doped LiNi_0.8Co_0.2O₂ cathode materials were synthesized via a rheological phase reaction method. It is found that the Ca doping significantly improves reversible capacity, cycling performance, thermal stability and rate capability. The Ca-doped LiNi_0.8Co_0.2O₂ cathode material maintains nearly its initial discharge capacity up to 100 cycles at room temperature. It also delivers an initial discharge capacity of 183 mA h g^− 1 and still keeps 131 mA h g^− 1 even after 120 cycles at 60 °C. These results, together with the X-ray diffraction and electrochemical impedance spectroscopy analysis, reveal that Ca²⁺ ions occupy Li⁺ ion sites to form Ca_Li defects and lithium vacancies (V_Li′), which reduce the resistance and increases conductivity of LiNi_0.8Co_0.2O₂.     

The use of the platinum electrode coated with ultrathin poly(allylamine hydrochloride)/Nafion films for selective detection of hydrogen peroxide

In this paper, a novel polyelectrolyte multilayer (PEM) film-coated platinum electrode for the selective detection of H₂O₂ was presented. The PEM film was formed by the layer-by-layer assembly technique. The quartz crystal microbalance experiments showed that the thickness of the prepared Nafion layer was about 8 nm and depended on the pH of poly(allylamine hydrochloride) solution. The combination of different polyanions and polycations layers was investigated, and it is found that ploy(allylamine hydrochloride) (PAH) and Nafion composited film functioned best as a diffusion barrier toward uric acid (UA) and ascorbic acid (AA) while allowed H₂O₂ to pass through smoothly. When the platinum electrode coated with two-bilayer film, (PAH/Nafion)₂, the amperometric responses of 0.1 mM UA and 0.1 mM AA were respectively 0.008 and 0.006 μA, which were only 0.2% or less of the response of 0.1 mM H₂O₂ (4.0 μA). The linear response range of the electrode toward H₂O₂ was from 1.0 μM to 1.0 mM, and the detection limit was 0.3 μM. The electrode also displayed high operational stability and long-term storage stability.     

Co<Subscript>3</Subscript>O<Subscript>4</Subscript> @ PFR cube-like core–shell nanocomposite prepared via a facile one-step hydrothermal approach

The Co₃O₄ @ phenol formaldehyde resin (PFR) cube-like nanocomposites are prepared by one-step hydrothermal process at 120–180 °C for 3–9 h. Co(NO₃)₂·6H₂O, hexamethylenetetramine (HMT), and phenol are used as precursors in water solvent. Any adventitious oxidants and additives are not presented. The transmission/scanning electronic microscope (TEM, SEM) images show as-obtained typical samples are consisted of cube-like Co₃O₄ as core and PFR as shell. The X-ray diffraction (XRD) data indicate the samples are consisted of cube-phase Co₃O₄ with amorphous PFR. Fourier transform infrared spectra (FTIR) further confirm Co₃O₄ and PFR are contained in the samples. Room-temperature vibration magnetic strength measurements (VMS) indicate that the antiferromagnetic properties of core–shell nanocomposites evidently differ from the naked-Co₃O₄ nanoparticles.     

Improved electrochemical properties of Sr2+-doped LiNi0.8Co0.2O2 synthesized via a sol-gel route using tartaric acid as a chelating agent

Single-phase undoped LiNi_0.8Co_0.2O₂ and Sr²⁺-doped LiNi_0.8Co_0.2O₂ were synthesized by a low temperature tartaric acid assisted sol-gel method. Small quantities of Sr²⁺ were used as dopants in order to improve the electrochemical characteristics, especially the capacity and cycling performance of LiNi_0.8Co_0.2O₂. The electrochemical performance of the undoped material was promising with a first discharge capacity of 174 mAh/g and 165 mAh/g after 10 cycles with a 100% cycling efficiency in the tenth cycle. Addition of Sr²⁺ for Li in minimum quantities with the Sr²⁺/Li⁺ dopant mole ratio ranging from 10⁻⁴ to 10⁻⁸ resulted in improved electrochemical properties for dopant mole ratio of 10⁻⁶. The first discharge capacity was 182 mAh/g and the tenth was 174 mAh/g at the 10th discharge. The synthesis of Sr²⁺-doped LiNi_0.8Co_0.2O₂ and its improved electrochemical properties have been discussed for the first time. The improved electrochemical properties of Sr²⁺-doped LiNi_0.8Co_0.2O₂ system are explained based on defect models.     

Influence of ceramic oxide materials on lithium based potentiometric CO2 sensors

In these potentiometric sensors, a mixed binary carbonate sensing material consisting of 90 mol% Li₂CO₃ and 10 mol% BaCO₃ was modified by adding ceramic oxide materials such as SiO₂, B₂O₃, La₂O₃, Bi₂O₃, CeO₂ and In₂O₃ in different mol% concentrations. Various sensors mixed with these external oxides have shown good performance at operating temperatures below 300 °C. Scanning electron microscopy reveals that a glassy sensing phase is formed in the sensing bi-carbonate by the addition of ceramic oxides and sintered at 600 °C for 1 h. The sensor mixed with SiO₂:B₂O₃:Bi₂O₃ in 1:2:1 mol% showed an excellent response and recovery characteristics and followed a fair Nernstian behavior with a ΔEMF/dec value of −48.18 at as low as 150 °C. The decrease in operating temperature is attributed to the enhanced lithium ion migration through the glassy sensing phase of the sensing electrode.     

Effects of doping with nanoscale Co3O4 particles on the superconducting properties of powder-in-tube processed MgB2 tapes

Nanoscale Co₃O₄ particles were doped into MgB₂ tapes with the aim of developing superconducting wires with high-current-carrying capacity. Fe-sheathed MgB₂ tapes with a mono-core were prepared using the in situ powder-in-tube (PIT) process with the addition of 0.2–1.0 mol% Co₃O₄. The critical temperature decreased monotonically with an increasing amount of doped Co₃O₄ particles for all heat-treatment temperatures from 600 to 900 °C. However, the transport critical current density (J_c) at 4.2 K varied with the heat-treatment temperatures. The J_c values in magnetic fields ranging from 7 to 12 T decreased monotonically with increasing Co₃O₄ doping level for a heat-treatment temperature of 600 °C. In contrast, some improvements on the J_c values of the Co₃O₄ doped tapes were observed in the magnetic fields below 10 T for 700 and 800 °C. Furthermore, J_c values in all the fields measured increased as the Co₃O₄ doping level increase from 0 to 1 mol% for 900 °C. This heat-treatment temperature dependence of the J_c values could be explained in terms of the heat-treatment temperature dependence of the irreversibility field with Co₃O₄ doping.     

Synthesis and application of nanostructured MCo<Subscript>2</Subscript>O<Subscript>4</Subscript>(M=Co,Ni) for hybrid Li-air batteries

We report the synthesis of MCo₂O₄ (M=Co, Ni) on Ni-mesh by a simple metal acetate decomposition method. Stability tests of the samples in aqueous acidified LiCl, LiOH and LiTFSI in H₂O/DME showed that Co₃O₄/Ni and Co₃O₄-PVP/Ni are relatively stable in alkaline and neutral environments, with Co₃O₄/Ni being relatively more stable. For NiCo₂O₄/Ni and NiCo₂O₄-PVP/Ni, the low weight percentage change of cobalt in LiTFSI in H₂O/DME suggests that they are mostly stable in this electrolyte. The electrochemical performance of the Li-air cell was evaluated using Li anode and a LAGP ceramic separator with above mentioned electrolytes. Co₃O₄ showed slightly higher catalytic activity for oxygen reduction reaction (ORR) than for oxygen evolution reaction (OER) for the first three cycles. The cell with LiTFSI in H₂O/DME as aqueous catholyte showed that NiCo₂O₄ is a better catalyst for the OER than for the ORR, while the reverse was observed when LiOH was used as the electrolyte.     

Synthesis and characterization of Ni1−xCoxFe2O4 nanoparticles

Ni_1−xCo_xFe₂O₄ (x=0.6, 0.8 and 0.9) nanoparticles have been synthesized with various crystallite sizes depending on the thermal treatments and composition (cobalt content) using the sol-gel combustion method. The size of nanoparticles has been controlled by thermal treatment. On the other hand, the magnetic property of the ferrite has been controlled by changing the heat treatment. Morphology and particle sizes of Ni_1−xCo_xFe₂O₄ have been studied using atomic force microscopy (AFM) and transmission electron microscopy (TEM). The presence of functional group has been identified by Fourier Transform Infrared (FTIR) spectra. From TGA-DTA studies, the weight gains of Ni_1−xCo_xFe₂O₄ nanoparticles have been observed and it might be due to capping organic molecules with oxygen at temperatures above 200 °C. Magnetic properties of Ni_1−xCo_xFe₂O₄ particles have been analysed using VSM and it is found that saturation magnetization (M_s) has increased with particle size and has coercivity (H_c) increased initially and then decreased. The M_s and H_c values decreased with the increase of content of cobalt in Ni_1−xCo_xFe₂O₄.