Synthesis and Characterization of La‐Doped Fe3O4‐Polyaniline Magnetic Response Nanocomposites

Lanathum (La)‐doped Fe₃O₄ magnetic nanoparticles were prepared in aqueous solution at room temperature, then La‐doped Fe₃O₄‐polyaniline (PANI) nanocomposites containing a dispersion of La‐doped Fe₃O₄ nanoparticles were synthesized via in‐situ polymerization of aniline monomer. The structure and properties of the synthesized samples were characterized with X‐ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectrometry (FTIR), thermogravimetric analysis (TGA), inductively coupled plasma atomic emission spectrometry (ICPAES), and a vibrating sample magnetometer (VSM). The resulting particles of La‐doped Fe₃O₄ and La‐doped Fe₃O₄‐PANI were almost spherical with diameters ranging from 15 to 25 nm and 25 to 85 nm, respectively. The La‐doped Fe₃O₄‐PANI composite presented core‐shell structures; polyaniline covered the La‐doped Fe₃O₄ completely. The specific saturation magnetization of La‐doped Fe₃O₄‐PANI depended on the starting material of La‐doped Fe₃O_4. It increased with increasing amounts of La and Fe₃O₄ content.     

Electrophoretically deposited polyaniline/ZnO nanoparticles for p–n heterostructure diodes

A p–n heterostructure diode of polyaniline (PANI) and ZnO nanoparticles was prepared by the electrophoretic deposition of PANI on ZnO nanoparticles thin film coated fluorine doped tin oxide (FTO) glass at room temperature. The morphological, structural and optical studies substantiated the penetration, bonding and the interaction of PANI molecules with ZnO nanoparticles thin film substrates. The prominent blue shift in UV-Vis spectra indicated the strong interaction between ZnO and PANI through the decreased degree of orbital overlap between π$\pi$ electrons of the phenyl rings with the lone pair of the nitrogen atom in the PANI molecules. The I–V$I\text{–}V$ characteristics of PANI/ZnO heterostructure diode showed weak rectifying behavior with non-linear nature of I–V$I\text{–}V$ curve of PANI/ZnO heterostructure device. The typical ohmic behavior was observed by the I–V$I\text{–}V$ characterization of PANI/ZnO heterostructure at the interface of PANI and ZnO thin film layer without top Pt thin layer contact.     

Fabrication of superhydrophobic polyaniline films with rapidly switchable wettability

A superhydrophobic polyaniline (PANI) film has been fabricated by using a facile one-step spraying method. The PANI was synthesized via in situ doping polymerization in the presence of perfluorooctanoic acid (PFOA) as the dopant. The water contact angle of this superhydrophobic surface reaches to 156°. Both the surface chemical compositions and morphological structures were analyzed. A granular morphology of PANI with a moderate amount of nanofibers was obtained. Moreover, a rapid surface wettability transition between superhydrophobicity and superhydrophilicity can be observed when it is doped with PFOA and de-doped with base. The mechanism for this tunable wettability has been discussed in detail.     

Shear Stress and Dielectric Analysis of H3PO4 Doped Polyaniline Based Electrorheological Fluid

We synthesized phosphoric acid (PA) doped polyaniline (PANI) particles (PANI‐PA) and investigated their electrorheological (ER) and dielectric characteristics when they were dispersed in silicone oil. Flow curves of the PANI‐PA based ER fluid under several applied electric field strengths were analyzed using a shear stress model. We also examined ER characteristics based on the relaxation time obtained from the dielectric spectrum.     

Thermal Characteristics of PVA-PANI-ZnS Nanocomposite Film Synthesized by Gamma Irradiation Method

Gamma irradiation is employed for in situ preparation of PVA-PANI-ZnS nanocomposite. The irradiation dose is varied from 10 to 40 kGy at 10 kGy intervals. The XRD result confirms the formation of crystalline phases corresponding to ZnS nanoparticles, PVA and PANI. Field emission scanning electron microscopy shows the formation of agglomerated PANI along the PVA backbone, within which the ZnS nanoparticles are dispersed.UV-visible spectroscopy is conducted to measure the transmittance spectra of samples revealing the electronic absorption characteristics of ZnS and PANI nanoparticles. Photo-acoustic(PA) setup is installed to investigate the thermal properties of samples. The PA spectroscopy indicates a high value of thermal diffusivity for samples due to the presence of ZnS and PANI nanoparticles. Moreover, at higher doses, the more polymerization and formation of PANI and ZnS nanoparticles result in enhancement of thermal diffusivity.     

Polyaniline nanoparticles with controlled sizes using a cross-linked carboxymethyl chitin template

Polyaniline (PANI) nanoparticles were chemically synthesized in the presence of a cross-linked carboxymethyl chitin (CM-chitin) acting as a template. The reaction was performed under acidic conditions and the template was removed after the polymerization of aniline was completed. The morphology of the synthesized PANI was globular with a diameter in the nanometer range. The degree of cross-linking of the CM-chitin played an important role in determining the size of the obtained PANI nanoparticles, which decreased from approximately 392 to 160 nm with increase in concentration of the cross-linking agent, glutaraldehyde, from 0 to 9 μmol, respectively. At a higher glutaraldehyde concentration (18 μmol), an aggregated PANI network was observed due to the incomplete removal of the more highly cross-linked CM-chitin. Molecular characterization (including UV-Visible, FTIR, TGA, and XRD techniques) revealed that the structure of the synthesized PANI nanoparticles is identical to that of conventional PANI. A mechanism is proposed for the formation of PANI nanoparticles in the presence of the cross-linked CM-chitin template.     

Preparation and characterization of conductive nanostructured particles based on polyaniline and cellulose nanofibers

Conducting polyaniline (PANI) and cellulose coated PANI (PANI-NC) nanostructures with sizes of about 80–100 nm, doped with hydrochloric acid were synthesized by a sonochemical method. Both type of particles resulted electrically conductive (direct current conductivity of 0.059 and 0.075 S/cm for PANI and PANI-NC structures, respectively) and could be dispersed easily in water, leading to green colored suspensions that remain stable for more than 4 h. The morphology, crystallinity, electrical conductivity (σ) and thermal stability of the obtained PANI based structures were investigated and compared. Furthermore, UV–Vis spectroscopy and rheology of water suspensions were used to explain the measured properties. Although the concentration of cellulose fibers used to synthesize the PANI-NC structures was very low, important differences respect to the neat PANI fibers regarding the microstructure, electrical conductivity and suspension behavior were found.     

Co3O4-ZnO hierarchical nanostructures by electrospinning and hydrothermal methods

A new hierarchical nanostructure that consists of cobalt oxide (Co₃O₄) and zinc oxide (ZnO) was produced by the electrospinning process followed by a hydrothermal technique. First, electrospinning of a colloidal solution that consisted of zinc nanoparticles, cobalt acetate tetrahydrate and poly(vinyl alcohol) was performed to produce polymeric nanofibers embedding solid nanoparticles. Calcination of the obtained electrospun nanofiber mats in air at 600 °C for 1 h, produced Co₃O₄ nanofibers with rough surfaces containing ZnO nanoparticles (i.e., ZnO-doped Co₃O₄ nanofibers). The rough surfaced nanofibers, containing ZnO nanoparticles (ZnNPs), were then exploited as seeds to produce ZnO nanobranches using a specific hydrothermal technique. Scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were employed to characterize the as-spun nanofibers and the calcined product. X-ray powder diffractometery (XRD) analysis was used to study the chemical composition and the crystallographic structure.     

Ultrasound and ionic-liquid-assisted synthesis and characterization of polyaniline/Y2O3 nanocomposite with controlled conductivity

A sonochemical method has been employed to prepare polyaniline-Y₂O₃ nanocomposite with controlled conductivity with the assistance of an ionic liquid (IL). Ultrasound energy and the IL replace conventional oxidants and metal complexes in promoting the polymerization of aniline monomer for the first time. Structural characterization has revealed that the resulting nanocomposite consists of microspheres of average diameter 3–5 μm. The products were found to consist of regular solid microspheres covered with some 40 nm nanoparticles. Under certain polymerization conditions, polyaniline nanofibers and nanosheet were obtained. The method may open a new pathway for the preparation of nanoscale conducting polymer nanocomposites with the aid of ILs. The conductivity of the product varies with the mass ratio of aniline monomer to Y₂O₃ and IL. TG curves of the products suggest that the thermal degradation process of the PANI/Y₂O₃ composites proceeds in two steps and that the composites are more thermally stable than pure PANI. The reaction conditions have been optimized by varying parameters such as the aniline/Y₂O₃ ratio and the type and amount of IL used. The effect of the ultrasonic irritation time and frequency on the morphology, conductivity and yield were discussed.     

Preparation and photoluminescence characteristics of Tb-, Sm- and Dy-doped Y2O3 nanofibers by electrospinning

An electrospinning–calcination strategy was established to fabricate Y₂O₃ nanofibers doped with rare earth ions (Tb, Sm and Dy) using electrospun PVA/RE(NO₃)_x/Y(NO₃)₃ composite nanofibers as precursors (x=3.4). The prepared nanofibers were characterized by XRD, FESEM, EDS, (HR)TEM and PL analyses. Based on the experimental results, a solid–solid growth mechanism (SS) was proposed to describe the formation of inorganic crystalline fibers from organic/inorganic composite nanofibers by calcination. It was determined that carbonaceous nanoparticles that were formed in the process of pre-carbonization adsorbed Y₂O₃:RE nanoparticles to grow Y₂O₃:RE crystal, and the resultant nanofibers exhibited a typical crystalline domain with grain boundary. The obtained Y₂O₃:RE nanofibers possessed excellent luminescent characteristics and could be used as an appreciable luminescent material.     

Effects of Sn doping on the morphology,structure, and electrical property of In2O3 nanofiber networks

This paper studies the effect of Sn doping on the morphological, structural, and electrical properties of the Sn-doping In₂O₃ nanofiber networks. In₂O₃-based nanofibers with various relative concentration of Sn precursor (0–20 mol%) were fabricated through the electrospinning method. Scanning electron microscopy observations show that, depending on the relative concentration of SnCl₄ in the starting materials, the doped nanofibers with different morphologies, from smooth to corn-like and then to accidented, are fabricated. Transmission electron microscopy and X-ray diffraction analyses reveal that the Sn dopants influence the growth direction of seeds, resulting in doped nanoparticles having diverse shapes and sizes, which are critical for the formation of doped nanofiber with different morphology. From these nanofiber networks, we fabricated several thin sheets to characterize the effect of Sn concentration on the electrical resistivity. The resistivity of thin sheets decreased significantly before the doping concentration up to 12.5 mol%, and then increased slightly at a larger addition. This work will assist further understanding the formation of Sn-doped In₂O₃ nanofibers and is expected to be extended to other transparent conductive oxides.     

A Novel Approach to Prepare CaCO3/Polyvinylpyrrolidone (PVP) Composite Nanofibers

A new route to prepare CaCO₃ nanoparticles/polyvinylpyrrolidone (PVP) nanofibers is reported. An aqueous solution of K₂CO₃ was added to a solution of CaCl₂/PVP, resulting in in-situ preparation of CaCO₃ nanoparticles. Then composite nanofibers containing CaCO₃ nanoparticles were successfully prepared by electrospinning. The morphology of the resulting composite nanofibers was characterized by field-emission scanning electron microscopy. In addition, the products were characterized by thermogravimetry analysis and Fourier transform infrared spectra.     

Sonochemical synthesis of polyaniline nanofibers

Conventionally, micro-sized irregular polyaniline (PANI) particles were synthesized by dropwise addition of the ammonium persulfate (APS) solution into the aniline (ANI) solution with mechanical stirring. By replacing the mechanical stirring with an ultrasonic irradiation, PANI nanofibers in diameters of approximately 50 nm and lengths of 200 nm to several micrometers were prepared. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) showed that at the early stage of polymerization, the polymers formed in both the mechanical stirred and ultrasonicated systems are in the form of nanofiber. However, with continuing of the reaction, these primary nanofibers grow and agglomerate into irregular shaped PANI particles in the mechanical stirred system, while in the case of the ultrasonic irradiation, the growth and agglomeration are effectively prevented, preserving thus the PANI nanofibers in the final product. By increasing the APS/ANI molar ratio from 0.5 to 2.5, the aspect ratios of the PANI nanofibers decreased. The PANI nanofibers exhibit higher solubility than the irregular shaped PANI particles. Although the yield, as well as the conductivity of the ultrasonic synthesized PANI nanofibers, was slightly lower than the irregular shaped PANI particles, the ultrasonic synthesis approach is one of the facile and scalable approaches in synthesizing PANI nanofibers in comparison with other ones without use of templates (e.g., the interfacial polymerization and rapid mixing polymerization). UV-Vis and Fourier transformed infrared (FTIR) spectra indicated ultrasound had no significant effect on the chemical structure of the PANI.     

Preparation of poly(?-caprolactone)-based polyurethane nanofibers containing silver nanoparticles

In this study, poly(?-caprolactone)-based polyurethane (PCL-PU) nanofibers containing Ag nanoparticles for use in antimicrobial nanofilter applications were prepared by electrospinning 8 wt% PCL-PU solutions containing different amounts of AgNO₃ in a mixed solvent consisting of DMF/THF (7/3 w/w). The average diameter of the pure PCL-PU nanofibers was 560 nm and decreased with increasing concentration of AgNO₃. The PCL-PU nanofiber mats electrospun with AgNO₃ exhibited higher tensile strength, tensile modulus, and lower elongation than the pure PCL-PU nanofiber mats. Small Ag nanoparticles were produced by the reduction of Ag⁺ ions in the PCL-PU solutions. The average size and number of the Ag nanoparticles in the PCL-PU nanofibers were considerably increased after being annealed at 100 °C for 24 h. They were all sphere-shaped and evenly distributed in the PCL-PU nanofibers, indicating that the PCL-PU chains stabilized the Ag nanoparticles well.     

UV-protection properties of electrospun polyacrylonitrile nanofibrous mats embedded with MgO and Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles

This article describes the ultraviolet (UV) protection of MgO and Al₂O₃ nanoparticles embedded electrospun polyacrylonitrile (PAN) nanofibrous mats. UV radiation is a harmful part of sunlight and prolonged exposure to it can cause serious skin damages. In this research, nanofibrous mats consisting of nanofibers with different diameters containing different amounts of MgO, Al₂O₃, MgO Plus, and Al₂O₃ Plus nanoparticles were produced, and their UV-protection was measured. The specific surface area of MgO, MgO Plus, Al₂O₃, and Al₂O₃ Plus nanoparticles was 230, 600, 275, and 550 m²/g, respectively. The mean diameter of electrospun PAN nanofibers embedded with metal oxide nanoparticles was in the range of 665–337 nm. The results showed that the UV-protection (shielding) capability of the mats strongly depends on fiber diameter; in fact a thin mat of nanofibers has a much stronger UV-protection in comparison to a thicker mat composed of regular fibers. UV transmission is reduced as a result of embedding MgO and Al₂O₃ nanoparticles in the electrospun PAN nanofibrous mats. MgO Plus and Al₂O₃ Plus show higher UV-protection than MgO and Al₂O₃.     

Short electrospun composite nanofibers: Effects of nanoparticle concentration and surface charge on fiber length

Short composite nanofibers were fabricated by electrospinning polymer/TiO₂ nanoparticle solutions of 13 wt. % cellulose acetate as a polymer under a voltage of 5.5 kV and at a flow rate of 0.1 μL/min, and the nanoparticles could be added in concentrations as high as 50 wt. %. The length of the short composite nanofibers was significantly decreased from 112 to 70 μm by the addition of at least a 5 wt. % concentration of nanoparticles, and it gradually continued to decrease as the nanoparticle concentration was increased. The length of the short composite nanofibers with a low concentration of nanoparticles was affected by the surface charge of the nanoparticles, and negatively charged nanoparticles readily dispersed to the negatively charged polymers in solution, which resulted in an elongation of the fabricated short composite nanofibers.     

Nanocomposite fabric formation by electrospinning and electrospraying technologies

Electrospraying and electrospinning processes were employed for the production of nanocomposite material of polymer nanofibers blended with nanoparticles. The diameter of polymer nanofibers made of PVC, PSU or nylon was smaller than 500 nm. Metal oxide nanoparticles of TiO₂, MgO, and Al₂O₃ of the size 20–100 nm suspended in methanol were deposited on the polymer nanofibers. Three configurations of electrospray/electrospun nozzles used for the nanocomposite production were tested: 1. simultaneous electrospraying during the electrospinning process, 2. electrospraying onto the same rotating drum after the electrospinning is completed, and 3. electrospraying onto the electrospun mat removed from the drum and placed onto a heated table.     

Dielectric and impedance studies of DBSA doped polyaniline/PVC composites

Polyaniline (PANI) was doped with dodecylbenzene sulfonic acid (DBSA) and then mixed with PVC by solution blending method to prepare DBSA doped PANI (PAND)/PVC composites. FTIR spectroscopy indicates the strong dipole–dipole interaction between the individual components of the composites. The ac electrical properties of the synthesized composites were investigated by complex impedance spectroscopy in the frequency range of 0.5–10⁶ Hz at room temperature. Both dielectric loss factor and permittivity increase with the decrease of frequency exhibiting strong interfacial polarization at low frequency. Addition of PAND in PVC reduces the charge trapping centers by increasing the number of conducting channels participating in the relaxation process; hence an increase in conductivity is observed.     

Simultaneously depositing polyaniline onto bacterial cellulose nanofibers and graphene nanosheets toward electrically conductive nanocomposites

In this study, we report the construction of a ternary flexible nanocomposite of bacterial cellulose/graphene/polyaniline (BC/GE/PANI) via a facile two-step strategy. Bacterial cellulose/graphene (BC/GE) is first prepared by a novel in situ membrane-liquid-interface method, in which the three-dimensional continuous BC nanofibers can be maintained and the introduced GE can improve the mechanical properties mainly due to the uniform dispersion of GE in the BC matrix. To construct the effectively interconnected conductive paths between separated GE nanosheets, polyaniline (PANI) is simultaneously deposited on the surfaces of both BC nanofibers and GE nanosheets to obtain BC/GE/PANI with excellent electrical conductivity. It is found that the as-prepared BC/GE/PANI has an electrical conductivity of 1.7 ± 0.1 S cm⁻¹, which is higher than most of PANI-based composites. It is believed that the BC/GE/PANI nanocomposite possesses great potential for applications in electromagnetic shielding and flexible electrodes.