石墨烯在Al_2O_3(0001)表面生长的模拟研究

基于密度泛函理论的广义梯度近似法,对用化学气相沉积法在蓝宝石(α-Al_2O_3)(0001)表面上生长石墨烯进行理论研究.研究结果表明:CH_4在α-Al_2O_3(0001)表面上的分解是吸热过程,由CH_4完全分解出C需要较高能量及反应能垒,这些因素不利于C在衬底表面的存在.在α-Al_2O_3(0001)表面,石墨烯形核的活跃因子并不是通常认为的C原子,而是CH基团.通过CH基团在α-Al_2O_3(0001)表面上的迁移聚集首先形成能量较低的(CH)_x结构.模拟研究(CH)_x对揭示后续石墨烯的形核生长机理具有重要意义.     

CH3NO2在Cu(111)面吸附态的研究

用CNDO/2半经验量化计算方法对CH₃NO₂分子在Cu(111)面四个吸附位上25种吸附态进行了优化计算,得到以CH₃NO₂分子中的-NO₂取向吸附在Cu(111)面的桥位上,且CH₃NO₂分子中的ONO面与Cu-Cu键成60°时为最稳吸附态。计算得到的这一稳定吸附态的吸附取向和吸附体系的态密度结果与我们的实验结果是一致的;从吸附态的轨道成分分析表明, 关键词：     

CH2和CH3自由基吸附在Cun (n=1-6)团簇上C-H对称振动模式的软化

利用密度泛函理论中杂化泛函理论方法计算了CH₂和CH₃自由基吸附在Cu_n(n=1～6)团簇上时C?H对称伸缩振动模式的软化性质,结果表明,CH₂在Cun团簇上的吸附要比CH₃的吸附强. 计算得到的C-H键的振动频率与实验上测量的这两个自由基吸附在Cu(111)表面的结果符合得很好,随着团簇尺寸的增加,C-H对称伸缩振动频率的软化(红移)越来越大.     

A theoretical analysis of adsorption and dissociation of CH3OH on the stoichiometric SnO2(110) surface

A theoretical analysis based on the Hartree–Fock pseudopotential method and a density-functional theory calculation using a hybrid combination of general gradient approximation with pseudopotential procedure has been carried out to study the adsorption and dissociation of methanol on the stoichiometric SnO₂(110) surface. The dependence of the results upon model system and computing method is discussed. An optimization procedure of adsorbate and substrate atom positions on a six-layer slab model has been selected to characterize the corresponding geometric parameters, adsorption energy and charge-transfer processes related with the molecularly adsorbed CH₃OH and dissociative channels to yield methoxy or methyl fragments. In the high-coverage limit (θ=1), we find that dissociation of the methanol molecule via the heterolytic cleavage of the C---O bond is favoured. At lower coverage (θ=1/2), this channel and the molecularly adsorbed methanol present similar adsorption energies.     

Cu/CeO2(110)界面特性的第一性原理研究

Cu-CeO₂体系因其特殊的催化能力而在固体氧化物燃料电池和水煤气转化反应等多个催化领域有重要应用. 采用基于密度泛函理论的第一性原理方法, 在原子和电子层面上系统地研究了单个Cu原子及Cu小团簇在CeO₂(110)面上的吸附构型, 价键特性和电子结构, 结果表明: 1) 单个Cu原子的最稳定吸附位是两个表面O的桥位; 2) Cu团簇的稳定吸附构型为扭曲的四面体结构; 3) Cu原子及Cu团簇的吸附在CeO₂(110)面的gap区域引入了间隙态, 这些间隙态主要来自于Cu及其近邻的O和表层还原形成的Ce³⁺, 间隙态的出现表明Cu的吸附增强了CeO₂(110)表面的活性; 4) 吸附的单个Cu原子及Cu团簇分别被CeO₂(110)面表层的Ce⁴⁺离子氧化形成了Cu^δ+和Cu₄^δ+, 并伴随着Ce³⁺离子的形成, 这个反应可归结为Cu_x/Ce⁴⁺→Cu_x^δ+/Ce³⁺; 5) Cu团簇的吸附比Cu单原子的吸附引入了更多的Ce³⁺离子, 进而形成了更多的Cu^δ+-Ce³⁺催化活性中心. 结合已报道的Cu/CeO₂(111)界面特性, 更加全面地探明了Cu与CeO₂(111)和(110)两个较稳定低指数表面的协同作用特性, 较为系统地揭示了Cu增强CeO₂催化特性的原因及Cu与CeO₂协同作用的内在机理. 关键词： 2')" href="#">Cu/CeO₂ U')" href="#">DFT+U 吸附 电子结构     

Pd修饰Cu电极的电化学CO2还原

利用微分电化学质谱和电化学原位衰减全反射红外光谱技术探究了Cu和CuPd催化剂上CO₂和CO的电化学还原行为. 红外光谱观察到了生成甲醇、甲烷与乙烯的CH_x中间物种. 在CuPd电极CO₂还原过程中，红外光谱的CO吸附峰起始电位比Cu正移大约300 mV，说明CuPd能够有效促进CO₂还原；CO饱和溶液中，Cu和CuPd电极CO起始吸附电位基本相同；两电极上CO谱带出现的电位与CO₃^2-的谱带降低的电位基本相同，说明CO的吸附需要CO₃^2-的脱附. 利用电化学在线质谱发现在CuPd电极上CO还原产生CH₄和CH₃OH的起始电位比Cu电极正移约200 mV. 推测催化活性的提升可能是由于Pd的引入改变了Cu的d能带，且Pd吸附更多的H，从而促进CO₂还原，使CO能够与H结合并被深度还原.     

Density functional theory investigation of the structure of SO2 and SO3 on Cu(1 1 1) and Ni(1 1 1)

Density functional theory (DFT) slab calculations, mainly using the generalised gradient approximation, have been used to investigate the minimum energy structures of molecular SO₂ and SO₃ on Cu(1 1 1) and Ni(1 1 1) surfaces. On Ni(1 1 1) the optimal local adsorption structures are in close agreement with experimental results for both molecular species obtained using the X-ray standing wavefield technique, although for adsorbed SO₂ the energetic difference between two alternative lateral positions of the lying-down molecule on the surface is marginally significant. On Cu(1 1 1) the results for adsorbed SO₂, in particular, were sensitive to the DFT functional used in the calculations, but in all cases failed to reproduce the experimentally-established preference for adsorption with the molecular plane perpendicular to the surface. This result is discussed in the context of previously published DFT results for these species adsorbed on Cu(1 0 0). The optimal geometry found for SO₃ on Cu(1 1 1) is similar to that on Ni(1 1 1), providing agreement with experiment regarding the molecular orientation but not the adsorption site.     

CH分子束的强度与CH_4/He混合配比的关系及CH(A~2Δ)振转温度的计算

为了获得CH分子束及其相关特性,以氦气为载气,利用直流脉冲放电技术产生了CH分子束。实验记录了放电时间相对于脉冲分子束不同延时CH光谱信号强度的变化,放电相对延时为460μs左右获得最大的信号强度。研究了在保持CH4/He总气压3 atm和放电电压-4 kV不变的条件下CH分子束强度与不同配比的关系,建立了理论模型,对实验数据进行了理论拟合,拟合曲线与实验结果符合较好,配比为1%(甲烷与氦的气压比为1∶99)左右能够维持较稳定的放电现象和较强的放电强度而获得较强的CH自由基束流。在这一配比下对CH(A2Δ-X2Π)(0,0)带发射光谱进行探测和分析,获得CH(A2Δ)转动温度和振动温度分别为2455 K和4575 K,并估计此时每个脉冲中大约包含1013~1014个CH自由基。     

Microstructure and its influence on CH4 adsorption behavior of deep coal

In this paper we investigate the influence of microstructure on the CH4 adsorption behavior of deep coal. The coal microstructure is characterized by N2 adsorption at 77 K, scanning electron microscopy （SEM）, Raman spectroscopy, and Fourier transform infrared spectroscopy （FT-IR）. The CH4 adsorptions are measured at 298 K at pressures up to 5.0 MPa by the the volumetric method and fitted by the Langmuir model. The results show that the Langmuir model fits well with the experimental data, and there is a positive correlation with surface area, pore volume, ID/IG, and CH4 adsorption capacity. The burial depth also affects the methane adsorption capacity of the samples.     

甲基和羟基在Ir(111)表面吸附的密度泛函理论研究

在超原胞近似和slab模型基础上,采用周期性密度泛函理论,在0.11覆盖度（ML）下,对甲基与羟基在Ir(111)表面的吸附进行了研究,得到了甲基和羟基在Ir(111)表面不同吸附位置的吸附能和吸附构型,计算了它们的振动频率,同时分析了甲基和羟基共吸附于Ir(111)表面的情况。结果表明,甲基和羟基在Ir(111)表面的最稳定吸附位置都是top位,甲基是碳端向下吸附,羟基是通过氧端向下倾斜吸附。通过频率分析发现吸附后CH3中C-H键的对称伸缩振动、反对称伸缩振动以及剪切振动频率均发生了红移,而羟基中的O-H键的振动频率发生蓝移现象。通过计算对比发现甲醇分解为甲基和羟基过程是一个放热反应,从热力学角度来说该反应是可行的。     

Cluster and periodic DFT calculations of adsorption and activation of CO2 on the Cu(hkl) surfaces

The adsorption behavior and thermal activation of carbon dioxide on the Cu(1 1 1), Cu(1 0 0), and Cu(1 1 0) surfaces have been investigated by means of density functional theory calculations and cluster models and periodic slabs. According to the cluster models, the optimized results indicate that the basis set of C and O atoms has a distinct effect on the adsorption energy, but an indistinct one on the equilibrium geometry. For the CO₂/Cu(hkl) adsorption systems studied here, the final structure of adsorbed CO₂ is near linear and the preferred modes for the adsorption of CO₂ onto the Cu(1 1 1), Cu(1 0 0), and Cu(1 1 0) surfaces are the side-on adsorption at the cross bridge site with an adsorption energy of 13.06 kJ/mol, the side-on adsorption at the short bridge site (13.54 kJ/mol), and the end-on adsorption on the on-top site with C–O bonds located along the short bridge site (26.01 kJ/mol), respectively. However, the calculated adsorption energies from periodic slabs are lower as compared to the experimental data as well as the cluster model data, indicating that the periodic slab approach of generalized gradient approximation in the density function theory may be not suitable to obtain quantitative information on the interaction of CO₂ with Cu(hkl) surfaces.     

The adsorption of H2O on TiO2 and SnO2(110) studied by first-principles calculations

First-principles calculations based on density functional theory and the pseudopotential method have been used to investigate the energetics of H₂O adsorption on the (110) surface of TiO₂ and SnO₂. Full relaxation of all atomic positions is performed on slab systems with periodic boundary conditions, and cases of full and half coverage are studied. Both molecular and dissociative (H₂O→OH⁻+H⁻) adsorption are treated, and allowance is made for relaxation of the adsorbed species to unsymmetrica configurations. It is found that for both TiO₂ and SnO₂ an unsymmetrical dissociated configuration is the most stable. The symmetrical molecularly adsorbed configuration is unstable with respect to lowering of symmetry, and is separated from the fully dissociated configuration by at most a very small energy barrier. The calculated dissociative adsorption energies for TiO₂ and SnO₂ are in reasonable agreement with the results of thermal desorption experiments. Calculated total and local electronic densities of states for dissociatively and molecularly adsorbed configurations are presented, and their relation with experimental UPS spectra is discussed.     

钙钛矿(C6H5CH2NH3)2PbBr4拉曼光谱研究

运用激光拉曼光谱实验和密度泛函理论计算研究了450～1 700 cm-1光谱范围内有机-无机杂化钙钛矿材料(C₆H₅CH₂NH₃)₂PbBr₄的振动模式特性。对比实验所得拉曼光谱和理论计算所得拉曼光谱,发现密度泛函理论计算可以很好的模拟(C₆H₅CH₂NH₃)₂PbBr₄有机部分的分子振动模式。同时通过比较分析密度泛函理论计算和参考文献,对450～1 700 cm-1光谱范围内的拉曼峰的分子振动模式进行了初步的归属,并发现该光谱范围内的拉曼峰主要是由(C₆H₅CH₂NH₃)₂PbBr₄分子中有机部分振动所产生的。     

TiO2分子在GaN(0001)表面吸附的理论研究

采用基于密度泛函理论的平面波超软赝势法,计算了TiO₂分子在GaN(0001)表面的吸附成键过程、吸附能量和吸附位置. 计算结果表明不同初始位置的TiO₂分子吸附后,Ti在fcc或hcp位置,两个O原子分别与表面两个Ga原子成键,Ga-O化学键表现出共价键特征,化学结合能达到7.932-7.943eV,O-O连线与GaN[1120]方向平行,与实验观测(100)[001] TiO₂//(0001)[1120]GaN一致. 通过动力学过程计算分析,TiO₂分子吸附过程经历了物理吸附、化学吸附与稳定态形成的过程,稳定吸附结构和优化结果一致. 关键词： GaN(0001)表面 2分子')" href="#">TiO₂分子 密度泛函理论 吸附     

Kinetic aspect of CO2 reforming of CH4 on Ni(1 1 1): A density functional theory calculation

Reaction pathways of CO₂ reforming of CH₄ on Ni(1 1 1) were investigated by using density functional theory calculation. The computed kinetic parameters agree with the available experimental data, and a new and simplified mechanism was proposed on the basis of computed energy barriers. The first step is CO₂ dissociation into surface CO and O (CO₂ → CO + O) and CH₄ sequentially dissociation into surface CH and H (CH₄ → CH₃ → CH₂ → CH). The second step is CH oxygenation into CHO (CH + O → CHO), which is more favored than its dissociation into C and hydrogen (CH → C + H). The third step is the dissociation of CHO into surface CO and H (CHO → CO + H). Finally, H₂ and CO desorb from Ni(1 1 1) and form free H₂ and CO. The rate-determining step is the CH₄ dissociative adsorption, and the key intermediate is surface adsorbed CHO. Parameters, which might modify the proposed mechanism, have been analyzed. In addition, the formation, deposition and elimination of surface carbon have been discussed accordingly.     

A density functional theory study on the adsorption of CO and O2 on Cu-terminated Cu2O （111） surface

The adsorptions of CO and 02 molecules individually on the stoichiometric Cu-terminatcd Cu20 （111） surface are investigated by first-principles calculations on the basis of the density functional theory. The calculated results indicate that the CO molecule preferably coordinates to the Cu2 site through its C atom with an adsorption energy of-1.69 eV, whereas the 02 molecule is most stably adsorbed in a tilt type with one O atom coordinating to the Cu2 site and the other O atom coordinating to the Cul site, and has an adsorption energy of -1.97 eV. From the analysis of density of states, it is observed that Cu 3d transfers electrons to 2π orbital of the CO molecule and the highest occupied 5σ orbital of the CO molecule transfers electrons to the substrate. The sharp band of Cu 4s is delocalized when compared to that before the CO molecule adsorption, and overlaps substantially with bands of the adsorbed CO molecule. There is a broadening of the 2π orbital of the 02 molecule because of its overlapping with the Cu 3d orbital, indicating that strong 3d-2π interactions are involved in the chemisorption of the 02 molecule on the surface.     

Adsorption and reactions of CH2I2 on Ru(001) surface

The adsorption and dissociation of CH₂I₂ were studied at 110 K with the aim of generating CH₂ species on the Ru(001) surface. The methods used included X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), temperature programmed desorption (TPD), Auger electron spectroscopy (AES) and work function measurements. Adsorption of CH₂I₂ is characterized by a work function decrease (0.96 eV at monolayer), indicating that adsorbed CH₂I₂ has a positive outward dipole moment. Three adsorption states were distinguished: a multilayer (T_p=200 K), a weakly bonded state (T_p=220 K) and an irreversibly adsorbed state. A new feature is the formation of CH₃I, which desorbs with T_p=160 K. The adsorption of CH₂I₂ at 110 K is dissociative at submonolayer, but molecular at higher coverages. Dissociation of the monolayer to CH₂ and I proceeded at 198–230 K, as indicated by a shift in the I(3d_5/2) binding energy from 620.6 eV to 619.9 eV. A fraction of adsorbed CH₂ is self-hydrogenated into CH₄ (T_p=220 K), and another one is coupled to di-σ-bonded ethylene, which — instead of desorption — is converted to ethylidyne at 220–300 K. Illumination of the adsorbed CH₂I₂ initiated the dissociation of CH₂I₂ monolayer even at 110 K, and affected the reaction pathways of CH₂.     

稀释剂对H2/CH4预混火焰熄灭特性影响

掺氢天然气在稀释气体作用下的熄灭特性研究对实际燃烧设备的设计和优化具有重要的指导意义。本文利用对冲火焰法测量了掺氢天然气层流火焰在N₂和CO₂作用下的熄灭拉伸率,并采用数值模拟耦合详细化学反应机理对N₂,CO₂和He的稀释剂效应展开研究。结果表明,Li、GRI Mech 3.0和FFCM-1机理均能定性反映燃料熄灭拉伸率随当量比的变化规律,且FFCM-1机理综合预测精度最高。实验和模拟发现,不同稀释剂气体对掺氢天然气熄灭拉伸率降低幅度满足:He22。进一步研究发现,CO₂由于热容大,在反应体系中会降低火焰温度,同时增强了链终止反应强度,通过热效应和化学效应两方面对火焰熄灭特性起作用。He则能显著改变燃料混合物的平均摩尔质量,从而改变体系中重要反应物和自由基的扩散特性,从扩散效应方面影响火焰的熄灭特性。     

阳离子空位和吸附氧的协同作用对Na0.5Bi0.5TiO3(100)表面磁性影响的第一性原理研究

The combination effect of cation vacancies and O₂ adsorption on ferromagnetism of Na_0.5Bi_0.5TiO₃(100) surface is studied by using density functional theory.An ideal Na_0.5Bi_0.5TiO₃(100) surface is non-magnetic and the cation vacancy could induce the magnetism.By comparing the formation energies for Na,Bi and Ti vacancy,the Na vacancy is more stable than the others.Therefore,we focus on the configuration and electric structure for the system of O₂ molecule adsorption on the Na_0.5Bi_0.5TiO₃(100) surface with a Na vacancy.Among the five physisorption configurations we considered,the most likely adsorption position is Na vacancy.The O₂ adsorption enhances the magnetism of the system.The contribution of spin polarization is mainly from the O 2p orbitals.The characteristics of exchange coupling are also calculated,which show that the ferromagnetic coupling is favorable.Compared with the previous calculation results,our calculations could explain the room-temperature ferromagnetism of Na_0.5Bi_0.5TiO₃ nanocrytalline powders more reasonably,because of taking into account adsorbed oxygen and cation vacancies.Moreover,our results also show that adsorption of O₂ molecule as well as introduction of cation vacancies may be a promising approach to improve multiferroic materials.     

CH_3I~(2+)的二体、三体解离过程的理论研究

采用密度泛函和耦合簇理论从过渡态的观点对CH_3I~(2+)离子的解离过程进行了计算和分析.优化得到了CH_3I,CH_3I+和CH_3I~(2+)的稳定结构及解离过渡态的几何构型并给出了相应能量,计算的第一、二电离能与实验结果符合.基于母体离子、过渡态和解离碎片的几何结构和能量,对CH_3I~(2+)的两体解离过程和三体解离过程进行了详细分析和讨论.给出了二体、三体解离的可能解离通道,并分析了实验上观测到的解离碎片离子的产生机制.计算结果表明,三重和单重绝热势能面上的一些解离过程表现出明显的差异.