Influence of increase in static pressure on bulk nanobubbles

The concentration and size distribution of bulk nanobubbles (ultrafine bubbles) of air in liquid was measured before and after increasing the static pressure. It was found that, after pressurization, the number concentration decreased and the size increased. The effect of pressurization is to compress the bubbles and decrease the distance between solids on the bubble surface, which act as nucleation sites for bubble growth and coalescence when the static pressure is returned to atmospheric pressure.     

Influence of bulk nanobubble concentration on the intensity of sonoluminescence

The present study mainly examined the effects of the volumetric concentration of nanobubbles (ultrafine bubbles) on the intensity of sonoluminescence (SL). The addition of nanobubbles at high acoustic amplitude enhanced the SL intensity for various bubble concentrations in comparison with that in pure water. This probably means that the resulting high amplitude is over the Blake threshold, and accordingly nanobubbles expand to some extent, leading to higher SL intensity. Therefore, nanobubbles have the potential to provide nucleation sites for sonochemistry. The influence of bubble size on the intensity of SL was also evaluated.     

Ultrasonic cavitation at liquid/solid interface in a thin Ga–In liquid layer with free surface

Cavitation in thin layer of liquid metal has potential applications in chemical reaction, soldering, extraction, and therapeutic equipment. In this work, the cavitation characteristics and acoustic pressure of a thin liquid Ga–In alloy were studied by high speed photography, numerical simulation, and bubble dynamics calculation. A self-made ultrasonic system with a TC4 sonotrode, was operated at a frequency of 20 kHz and a max output power of 1000 W during the cavitation recording experiment. The pressure field characteristic inside the thin liquid layer and its influence on the intensity, types, dimensions, and life cycles of cavitation bubbles and on the cavitation evolution process against experimental parameters were systematically studied. The results showed that acoustic pressure inside the thin liquid layer presented alternating positive and negative characteristics within 1 acoustic period (T). Cavitation bubbles nucleated and grew during the negative-pressure stage and shrank and collapsed during the positive-pressure stage. A high bubble growth speed of 16.8 m/s was obtained and evidenced by bubble dynamics calculation. The maximum absolute pressure was obtained at the bottom of the thin liquid layer and resulted in the strongest cavitation. Cavitation was divided into violent and weak stages. The violent cavitation stage lasted several hundreds of acoustic periods and had higher bubble intensity than the weak cavitation stage. Cavitation cloud preferentially appeared during the violent cavitation stage and had a life of several acoustic periods. Tiny cavitation bubbles with life cycles shorter than 1 T dominated the cavitation field. High cavitation intensities were observed at high ultrasonication power and when Q235B alloy was used because such conditions lead to high amplitudes on the substrate and further high acoustic pressure inside the liquid.     

Surface bubble nucleation stability

Recent research has revealed several different techniques for nanoscopic gas nucleation on submerged surfaces, with findings seemingly in contradiction with each other. In response to this, we have systematically investigated the occurrence of surface nanobubbles on a hydrophobized silicon substrate for various different liquid temperatures and gas concentrations, which we controlled independently. We found that nanobubbles occupy a distinct region of this parameter space, occurring for gas concentrations of approximately 100%-110%. Below the nanobubble region we did not detect any gaseous formations on the substrate, whereas micropancakes (micron wide, nanometer high gaseous domains) were found at higher temperatures and gas concentrations. We moreover find that supersaturation of dissolved gases is not a requirement for nucleation of bubbles.     

纳米通道内超疏水性表面气泡的运动

疏水表面纳米气泡的运动有重要的应用价值和研究意义。本文采用分子动力学方法,模拟了纳米通道壁面为超疏水性时壁面上气泡的运动状况。在质量力驱动下,随着外界驱动力的增大,两壁面上的气泡被逐渐拉长,同时逐渐变得扁平;前端"接触角"逐渐增大,而后端"接触角"逐渐减小。纳米通道内疏水性表面的纳米气泡随着外部驱动力的变化呈现出不同的形态,变化程度随着驱动力的增大而增大。在不同驱动力作用下,两个气泡总是保持相同的速度,气泡的速度与外力驱动的大小呈线性增长趋势。随着外力的增大,边界层及通道中心速度皆呈现增大趋势。     

Cavitation bubble behavior and bubble–shock wave interaction near a gelatin surface as a study of in vivo bubble dynamics

The collapse of a single cavitation bubble near a gelatin surface, and the interaction of an air bubble attached to a gelatin surface with a shock wave, were investigated. These events permitted the study of the behavior of in vivo cavitation bubbles and the subsequent tissue damage mechanism during intraocular surgery, intracorporeal and extracorporeal shock wave lithotripsy. Results were obtained with high-speed framing photography. The cavitation bubbles near the gelatin surface did not produce significant liquid jets directed at the surface, and tended to migrate away from it. The period of the motion of a cavitation bubble near the gelatin surface was longer than that of twice the Rayleigh's collapse time for a wide range of relative distance, L/R_max, excepting for very small L/R_max values (L was the stand-off distance between the gelatin surface and the laser focus position, and R_max was the maximum bubble radius). The interaction of an air bubble with a shock wave yielded a liquid jet inside the bubble, penetrating into the gelatin surface. The liquid jet had the potential to damage the gelatin. The results predicted that cavitation-bubble-induced tissue damage was closely related to the oscillatory bubble motion, the subsequent mechanical tissue displacement, and the liquid jet penetration generated by the interaction of the remaining gas bubbles with subsequent shock waves. The characteristic bubble motion and liquid jet formation depended on the tissue's mechanical properties, resulting in different damage mechanisms from those observed on hard materials.     

High-speed imaging of ultrasound driven cavitation bubbles in blind and through holes

The interest in application of ultrasonic cavitation for cleaning and surface treatment processes has increased greatly in the last decades. However, not much is known about the behavior of cavitation bubbles inside the microstructural features of the solid substrates. Here we report on an experimental study on dynamics of acoustically driven (38.5 kHz) cavitation bubbles inside the blind and through holes of PMMA plates by using high-speed imaging. Various diameters of blind (150, 200, 250 and 1000 µm) and through holes (200 and 1000 µm) were investigated. Gas bubbles are usually trapped in the holes during substrate immersion in the liquid thus preventing their complete wetting. We demonstrate that trapped gas can be successfully removed from the holes under ultrasound agitation. Besides the primary Bjerknes force and acoustic streaming, the shape oscillations of the trapped gas bubble seem to be a driving force for bubble removal out of the holes. We further discuss the bubble dynamics inside microholes for water and Cu²⁺ salt solution. It is found that the hole diameter and partly the type of liquid media influences the number, size and dynamics of the cavitation bubbles. The experiments also showed that a large amount of the liquid volume inside the holes can be displaced within one acoustic cycle by the expansion of the cavitation bubbles. This confirmed that ultrasound is a very effective tool to intensify liquid exchange processes, and it might significantly improve micro mixing in small structures. The investigation of the effect of ultrasound power on the bubble density distribution revealed the possibility to control the cavitation bubble distribution inside the microholes. At a high ultrasound power (31.5 W) we observed the highest bubble density at the hole entrances, while reducing the ultrasound power by a factor of ten shifted the bubble locations to the inner end of the blind holes or to the middle of the through holes.     

Effect of ultrasonication on the flotation of fine graphite particles: Nanobubbles or not?

It has been reported that nanobubbles can be produced by ultrasonication. However, it remains unclear whether part of the contribution of ultrasonication on flotation performance can be attributed to the generation of nanobubbles. In this work, we systematically studied this point of ultrasonication by combining a series of techniques including flotation testing, AFM (atomic force microscope) measurement, and settling testing. AFM imaging showed that no surface nanobubbles were found at the HOPG-water interface before and after subjection to ultrasonication. Further, surface nanobubbles were generated with solution exchange before ultrasonciation and then they were subjected to ultrasonication. It was found that ultrasonication did not destroy the pre-existing surface nanobubbles at the HOPG (highly oriented pyrolytic graphite) -water interface. Settling tests and flotation tests indicate that ultrasonication has a negligible influence on the interaction between graphite particles and thus flotation performance. Nanobubbles were not one of the outcomes for ultrasonication.     

A new pressure formulation for gas-compressibility dampening in bubble dynamics models

We formulated a pressure equation for bubbles performing nonlinear radial oscillations under ultrasonic high pressure amplitudes. The proposed equation corrects the gas pressure at the gas–liquid interface on inertial bubbles. This pressure formulation, expressed in terms of gas-Mach number, accounts for dampening due to gas compressibility during the violent collapse of cavitation bubbles and during subsequent rebounds. We refer to this as inhomogeneous pressure, where the gas pressure at the gas–liquid interface can differ to the pressure at the centre of the bubble, in contrast to homogenous pressure formulations that consider that pressure inside the bubble is spatially uniform from the wall to the centre. The pressure correction was applied to two bubble dynamic models: the incompressible Rayleigh–Plesset equation and the compressible Keller and Miksis equation. This improved the predictions of the nonlinear radial motion of the bubble vs time obtained with both models. Those simulations were also compared with other bubble dynamics models that account for liquid and gas compressibility effects. It was found that our corrected models are in closer agreement with experimental data than alternative models. It was concluded that the Rayleigh–Plesset family of equations improve accuracy by using our proposed pressure correction.     

含气泡液体中气泡振动的研究

研究了含气泡液体中单个气泡在驱动声场一定情况下的振动过程. 让每次驱动声场作用的时间特别短, 使气泡半径发生微小变化后再将其变化反馈到气泡群对驱动声场的散射作用中去, 从而可以得到某单个气泡周围受气泡散射影响后的声场, 接着再让气泡在该声场作用下做短时振动, 如此反复. 通过这样的方法, 研究了液体中单个气泡的振动情况并对其半径变化进行了数值模拟, 结果发现, 在液体中含有大量气泡的情况下, 某单个气泡的振动过程明显区别于液体中只有一个气泡的情况. 由于大量气泡和驱动声场的相互作用, 使气泡半径的变化存在多种不同的振动情况, 在不同的气泡大小和含量的情况下, 半径变化过程分别表现为: 在平衡位置附近振荡的过程; 周期性的空化过程; 一次空化过程后保持某一大小振荡的过程; 增长后维持某一大小振荡的过程等. 所以, 对于含气泡液体中气泡振动的研究, 在驱动声场一定的情况下, 必须考虑气泡含量的因素. 关键词： 含气泡液体 超声空化 散射 数值模拟     

Does salting-out effect nucleate nanobubbles in water: Spontaneous nucleation?

The solubility of gases in aqueous salt solution decreases with the salt concentration, often termed the “salting-out effect.” The dissolution of salt in water is followed by dissociation of salt and further solvation of ions with water molecules. The solvation weakens the affinity of gaseous molecules, and thus it releases the excess dissolved gas. Now it is interesting to know that what happens to the excess gas released during salting-out? Since it is imperative to note that the transfer of the dissolved gas in the bulk liquid may often occur in the form of nanobubbles. In this work, we have answered this question by investigating the nano-entities nucleation during the salting-out effect. The solubility of gases in aqueous salt solution decreases with the salt concentration, and it is often termed as the “salting-out effects.” The dissolution of salt in water undergoes dissociation of salt and further solvation of ions with water molecules. The solvation weakens the affinity of gaseous molecules, and thus it releases the excess dissolved gas. Now it is interesting to know that what happens to the excess gas released during salting-out? While it is also imperative to note that the gas transfer in the bulk liquid often occurs in the form of bubbles. With this hypothesis, we have experimentally investigated that whether the salting-out effect nucleates nanobubble or not. What is the strong scientific evidence to prove that they are nanobubbles? Does the salting-out parameter affect the number density? The answers to such questions are essential for the fundamental understanding of the origin and driving force for nanobubble generation. We have provided three distinct proofs for the nano-entities to be the nanobubbles, namely, (1) by freezing and thawing experiments, (2) by destroying the nanobubbles under ultrasound field, and (3) we also proposed a novel method for refractive index estimation of nanobubbles to differentiate them from nano drops and nanoparticles. The refractive index (RI) of nanobubbles was estimated to be 1.012 for mono- and di-valent salts and 1.305 for trivalent salt. The value of RI closer to 1 provides strong evidence of gas-filled nanobubbles. Both positive and negative charged nanobubbles nucleate during the salting-out effect depending upon the valency of salt. The nanobubbles during the salting-out effect are stable only for up to three days. This shorter stability could plausibly be due to reduced colloidal stability at a low surface charge.     

气泡在横流中的生长与脱离特性实验研究

为了系统研究气泡在横流中的运动学特性,利用水循环回路形成横流,采用高速数码摄像技术和图像处理方法对横流中气泡的演化过程进行描述。通过调节横流的平均流速和气体流量,获得了6种横流中的气泡形态,即单气泡、颈状泡、条带泡、泡囊、离散泡和雾状泡;解释了各类气泡形态的特征,对气泡尺寸及分布进行了统计,对气泡在横流中的发展过程进行了描述,发现气泡形态及气泡尺寸与横流速度密切相关,并受气体流量的影响,其中颈状泡和条带泡对横流流速的变化最为敏感。     

Effect of temperature on the morphology of nanobubbles at mica/water interface

The great implication of nanobubbles at a solid/water interface has drawn wide attention of the scientific community and industries. However, the fundamental properties of nanobubbles remain unknown as yet. In this paper, the temperature effects on the morphology of nanobubbles at the mica/water interface are explored through the combination of AFM direct image with the temperature control. The results demonstrate that the apparent height of nanobubbles in AFM images is kept almost constant with the increase of temperature, whilst the lateral size of nanobubbles changes significantly. As the temperature increases from 28℃ to 42℃, the lateral size of nanobubbles increases, reaching a maximum at about 37℃, and then decreases at a higher temperature. The possible explanation for the size change of nanobubbles with temperature is suggested.     

枝晶生长和气泡形成的数值模拟

本文建立了二维的格子玻尔兹曼方法-元胞自动机(lattice Boltzmann method-cellular automaton, LBM-CA)耦合模型, 对凝固过程中枝晶生长和气泡形成进行模拟研究. 本模型采用CA方法模拟枝晶的生长, 根据界面溶质平衡法计算枝晶生长的驱动力. 采用基于Shan-Chen多相流的LBM模拟气泡在液相中的生长和运动. 在LBM-CA的耦合模型中包含了固-液-气三相之间的相互作用. 应用Laplace定理和模拟气-液-固三相之间的润湿现象对模型进行了验证. 应用所建立的LBM-CA耦合模型模拟研究了气-液相互作用系数对单气泡生长的影响. 发现单气泡的生长速度和平衡半径随气-液相互作用系数的增大而增大. 定向凝固过程中枝晶和气泡生长的模拟结果再现了枝晶的择优生长、 气泡的优先形核位置、气泡的长大、合并、在枝晶间受挤变形以及在液相通道中的运动等物理现象, 与实验结果符合良好. 此外, 初始气体含量越高, 凝固结束时气泡的体积分数也相对较高. 本模型的模拟结果可以揭示在凝固过程中气泡形核、 生长和运动演化以及与枝晶生长相互作用的物理机理.     

BUBBLE BEHAVIOR AND HEAT TRANSFER MECHANISM IN FC-72 POOL BOILING

A transparent heater made of a thin synthetic diamond substrate along with a high-speed camera was used to investigate bubble behavior during pool boiling. The heater design, combined with the selected FC-72 liquid, overcame the difficulty of previous thin-film heater experiments where transparency and adequate heat flux could not be simultaneously achieved. It also resulted in an essentially uniform temperature field over the heater surface. The growth and merging of bubbles were visualized and quantitatively documented. The relative contribution from phase change to the overall heat flux was determined at several heat flux levels. At a heat flux level half of the critical heat flux (CHF), surface bubble nucleation was found to contribute to more than 70% of the heat transfer from the heater surface. At a similar heat flux level, the ratio of dry to wetted area was determined to exceed 1/3, significantly higher than that predicted by a recent hydrodynamic model for CHF (approximately 1/16). This result suggests that modifications are needed for the hydrodynamic model when applied to highly wetting fluid on nearly isothermal surfaces. The merging of bubbles to form vapor blankets over the heater surface was observed, as has been assumed in recent hydrodynamic models.     

Vortex dynamics of collapsing bubbles: Impact on the boundary layer measured by chronoamperometry

Cavitation bubbles collapsing in the vicinity to a solid substrate induce intense micro-convection at the solid. Here we study the transient near-wall flows generated by single collapsing bubbles by chronoamperometric measurements synchronously coupled with high-speed imaging. The individual bubbles are created at confined positions by a focused laser pulse. They reach a maximum expansion radius of approximately 425 μm. Several stand-off distances to the flat solid boundary are investigated and all distances are chosen sufficiently large that no gas phase of the expanding and collapsing bubble touches the solid directly. With a microelectrode embedded into the substrate, the time-resolved perturbations in the liquid shear layer are probed by means of a chronoamperometric technique. The measurements of electric current are synchronized with high-speed imaging of the bubble dynamics. The perturbations of the near-wall layer are found to result mainly from ring vortices created by the jetting bubble. Other bubble induced flows, such as the jet and flows following the radial bubble oscillations are perceptible with this technique, but show a minor influence at the stand-off distances investigated.     

Flow field around growing and rising vapour bubble by PIV measurement

A study on flow field measurement around growing and rising vapour bubbles by use of PIV technique is presented. Bubbles were generated from single artificial cavities. Experiments have been conducted with saturated boiling of distilled water at atmospheric pressure. In the experiment fluid velocity field surrounding the bubbles was visualized by use of polyamide tracer particles and a sheet of a YAG pulse laser beam. The images were recorded with a cross-correlation CCD-camera. It has been shown that for lower heat flux density bubble growths in an almost quiescent bulk of liquid. For higher heat flux density the train of bubbles creates a vapour column with strong wake effect. Maximum liquid velocity recorded is approximately equal to the terminal velocity of bubble rising in a stagnant liquid.     

球状泡群内气泡的耦合振动

振动气泡形成辐射场影响其他气泡的运动, 故多气泡体系中气泡处于耦合振动状态. 本文在气泡群振动模型的基础上, 考虑气泡间耦合振动的影响, 得到了均匀球状泡群内振动气泡的动力学方程, 以此为基础分析了气泡的非线性声响应特征. 气泡间的耦合振动增加了系统对每个气泡的约束, 降低了气泡的自然共振频率, 增强了气泡的非线性声响应. 随着气泡数密度的增加, 振动气泡受到的抑制增强; 增加液体静压力同样可抑制泡群内气泡的振动, 且存在静压力敏感区(1–2 atm, 1 atm=1.01325×10⁵ Pa); 驱动声波对气泡振动影响很大, 随着声波频率的增加, 能够形成空化影响的气泡尺度范围变窄. 在同样的声条件、泡群尺寸以及气泡内外环境下, 初始半径小于5 μm 的气泡具有较强的声响应. 气泡耦合振动会削弱单个气泡的空化影响, 但可延长多气泡系统空化泡崩溃发生的时间间隔和增大作用范围, 整体空化效应增强.     

Observations of the collapses and rebounds of millimeter-sized lithotripsy bubbles

Bubbles excited by lithotripter shock waves undergo a prolonged growth followed by an inertial collapse and rebounds. In addition to the relevance for clinical lithotripsy treatments, such bubbles can be used to study the mechanics of inertial collapses. In particular, both phase change and diffusion among vapor and noncondensable gas molecules inside the bubble are known to alter the collapse dynamics of individual bubbles. Accordingly, the role of heat and mass transport during inertial collapses is explored by experimentally observing the collapses and rebounds of lithotripsy bubbles for water temperatures ranging from 20 to 60 °C and dissolved gas concentrations from 10 to 85% of saturation. Bubble responses were characterized through high-speed photography and acoustic measurements that identified the timing of individual bubble collapses. Maximum bubble diameters before and after collapse were estimated and the corresponding ratio of volumes was used to estimate the fraction of energy retained by the bubble through collapse. The rebounds demonstrated statistically significant dependencies on both dissolved gas concentration and temperature. In many observations, liquid jets indicating asymmetric bubble collapses were visible. Bubble rebounds were sensitive to these asymmetries primarily for water conditions corresponding to the most dissipative collapses.     

Effects of surface tension on the dynamics of a single micro bubble near a rigid wall in an ultrasonic field

Acoustic cavitation is a very important hydrodynamic phenomenon, and is often implicated in a myriad of industrial, medical, and daily living applications. In these applications, the effect mechanism of liquid surface tension on improving the efficiency of acoustic cavitation is a crucial concern for researchers. In this study, the effects of liquid surface tension on the dynamics of an ultrasonic driven bubble near a rigid wall, which could be the main mechanism of efficiency improvement in the applications of acoustic cavitation, were investigated at the microscale level. A synchronous high-speed microscopic imaging method was used to clearly record the temporary evolution of single acoustic cavitation bubble in the liquids with different surface tension. Meanwhile, the bubble dynamic characteristics, such as the position and time of bubble collapse, the size and stability of the bubbles, the speed of bubble boundaries and the micro-jets, were analyzed and compared. In the case of the single bubbles near a rigid wall, it was found that low surface tension reduces the stability of the bubbles in the liquid medium. Meanwhile, the bubbles collapse earlier and farther from the rigid wall in the liquids with lower surface tension. In addition, the surface tension has no significant influence on the speed of the first micro-jet, but it can substantially increase the speed of second and the third micro-jets after the first collapse of the bubble. These effects of liquid surface tension on the bubble dynamics can explain the mechanism of surfactants in numerous fields of acoustic cavitation for facilitating its optimization and application.