Optical properties of N and transition metal R (R=V,Cr, Mn,Fe, Co,Ni, Cu,and Zn) codoped anatase TiO2

The electronic structures, deformation charge density, dipole moment and optical properties of N and transition metal R (R=V, Cr, Mn, Fe, Co, Ni, Cu and Zn) codoped anatase TiO₂ are studied using the plane-wave ultrasoft pseudopotential method of density functional theory (DFT). The results exhibit that the absorption coefficients of the N+Cr-doped TiO₂ are in accordance with the experimental values in the visible-light region. The calculated results reveal that the N+R-doped TiO₂ is helpful for enhancing the absorption coefficient in the visible-light region; especially, among the eight materials, N+Mn-doped TiO₂ has the largest value of absorption coefficient in the visible-light region. The ionic bonding and Jahn–Teller distortion would contribute to increase the photocatalytic activity of TiO₂ in the visible-light region. All in all, for doped TiO₂, the large dipole moment of TiO₆ octahedron can enhance the optical responses in the visible-light region; in this work, however, it is found that the small dipole moment of TiO₆ octahedron would increase the absorption coefficient in the visible-light region.     

First-principle study on optical properties of N-La-codoped anatase TiO

The electronic structures, deformation charge density, dipole moment, and optical properties of N-La-codoped anatase titanium dioxide (TiO2) are studied using the plane-wave ultrasoft pseudopotential method based on the density functional theory (DFT). The optical properties of two-ion-doped TiO2 are analyzed via electronic structures, deformation charge density, and dipole moment. For the model of N-La-doped TiO2 , a smaller atom fraction of N and La atoms induces better optical properties. The absorption edges of two doped TiO2 models redshift to the visible-light region.     

S掺杂对锐钛矿相TiO2电子结构与光催化性能的影响

采用基于第一性原理的平面波超软赝势方法研究了掺杂不同价态S的锐钛矿相TiO₂的晶体结构、杂质形成能、电子结构及光学性质.计算结果表明硫在掺杂体系中的存在形态与实验中的制备条件有关;掺杂后晶格发生畸变、原子间的键长及原子的电荷量也发生了变化,导致晶体中的八面体偶极矩增大; S 3p态与O 2p态、Ti 3d态杂化而使导带位置下移、价带位置上移及价带宽化,从而导致TiO₂的禁带宽度变窄、光吸收曲线红移到可见光区.这些结果很好地解释了S掺杂锐钛矿相TiO₂在可见光下具有优良的光催化性能的内在原因.根据计算结果分析比较了硫以不同离子价态掺杂对锐钛矿相TiO₂电子结构和光催化性能影响的差别. 关键词： 2')" href="#">锐钛矿相TiO₂ S掺杂 第一性原理 光催化性能     

N,Co共掺杂锐钛矿相YiO2光催化剂的第一性原理研究

采用第一性原理平面波超软赝势方法研究了N,Co共掺杂锐钛矿相TiO2的微观结构和光学性质.结果表明:N,Co共掺杂后TiO2晶格中产生的偶极矩使光生电子-空穴对更有效地分离;在TiO2导带和价带之间形成了新的杂质能级,一方面使吸收带边红移到可见光区,光吸收性能明显增强,另一方面有利于光生电子-空穴对的分离,提高TiO2的光量子效率;与纯TiO2相比,N,Co共掺杂锐钛矿相TiO2带边的氧化还原势只有微小的变化,共掺杂后TiO2的强氧化还原能力得以保持.     

Mn,N共掺杂对锐钛矿相TiO2微观结构和性能的影响

采用第一性原理平面波超软赝势方法,系统研究了Mn,N共掺杂对锐钛矿相TiO₂的晶体结构、缺陷形成能、电子结构、光学性质以及氧化还原能力的影响.研究表明:Mn,N共掺杂锐钛矿相TiO₂后,TiO₂晶格发生了畸变,导致晶体八面体偶极矩增加,有利于光生电子-空穴对的有效分离;在TiO₂带隙中出现了杂质能级,使锐钛矿相TiO₂的光学吸收带边红移,可见光区的吸收系数明显增大,有利于光催化效率的提高;在不考虑 关键词： 2')" href="#">锐钛矿相TiO₂ 第一性原理 Mn和N共掺杂 光催化性能     

氮铁共掺锐钛矿相TiO2电子结构和光学性质的第一性原理研究

本文采用基于密度泛函理论的平面波超软赝势方法研究了N,Fe共掺杂TiO₂的晶体结构、电子结构和光学性质.研究表明,N,Fe共掺杂TiO₂的晶格体积、原子间的键长及原子的电荷量发生变化,导致晶体中产生八面体偶极矩,并因此光生电子-空穴对有效分离,提高TiO₂的光催化活性;N,Fe共掺杂同时在导带底和价带顶形成了杂质能级,使TiO₂的禁带宽度变窄,光吸收带边红移到可见光区,这些杂质能级可以降低光生载流子的复合概率,提高Ti     

碳-锌共掺杂锐钛矿相TiO2 电子结构与光学性质的第一性原理研究

近年来的理论和实验研究表明,通过不同离子共掺杂TiO₂是减小其禁带宽度的一种有效方法.本文采用基于第一性原理的平面波超软赝势方法研究了C和Zn共掺杂TiO₂的能带结构、态密度和光学性质.计算结果表明C-Zn共掺杂导致导带相对Fermi能级发生了明显的下降,同时在TiO₂的导带下方与价带上方形成了新的杂质能级,使TiO₂的禁带宽度变小, TiO₂的光学吸收带边产生红移. 杂质能级可以降低光激发产生的电子-空穴对的复合概率, 提高TiO₂的光催化效率. 此外, 掺杂后TiO₂在可见光区的吸收系数有明显增加, 能量损失也明显减小.     

First-principles study of electronic structures and optical properties of Cu, Ag, and Au-doped anatase TiO2

We perform first-principles calculations to investigate the band structure, density of states, optical absorption, and the imaginary part of dielectric function of Cu, Ag, and Au-doped anatase TiO₂ in 72 atoms systems. The electronic structure results show that the Cu incorporation can lead to the enhancement of d states near the uppermost of valence band, while the Ag and Au doping cause some new electronic states in band gap of TiO₂. Meanwhile, it is found that the visible optical absorptions of Cu, Ag, and Au-doped TiO₂, are observed by analyzing the results of optical properties, which locate in the region of 400-1000 nm. The absorption band edges of Cu, Ag, and Au-doped TiO₂ shift to the long wavelength region compared with the pure TiO₂. Furthermore, according to the calculated results, we propose the optical transition mechanisms of Cu, Ag, and Au-doped TiO₂. Our results show that the visible light response of TiO₂ can be modulated by substitutional doping of Cu, Ag, and Au.     

Synthesis and characterization of TiO2/Fe2O3 core-shell nanocomposition film and their photoelectrochemical property

TiO₂/Fe₂O₃ core-shell nanocomposition film has been fabricated via two-step method. TiO₂ nanorod arrays are synthesized by a facile hydrothermal method, and followed by Fe₂O₃ nanoparticles deposited on TiO₂ nanorod arrays through an ordinary chemical bath deposition. The phase structures, morphologies, particle size, chemical compositions of the composites have been characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM) and ultraviolet-visible (UV-vis) spectrophotometer. The results confirm that Fe₂O₃ nanoparticles of mean size ca. 10 nm coated on the surface of TiO2 NRs. After depositing Fe₂O₃, UV-vis absorption property is induces the shift to the visible-light range, the annealing temperature of 600 °C is the best condition for UV-vis absorption property of TiO₂/Fe₂O₃ nanocomposite film, and increasing Fe content, optical activity are enhanced one by one. The photoelectrochemical (PEC) performances of the as-prepared composite nanorods are determined by measuring the photo-generated currents under illumination of UV-vis light. The TiO₂ NRs modified by Fe₂O₃ show the photocurrent value of 1.36 mA/cm² at 0 V vs Ag/AgCl, which is higher than those of unmodified TiO₂ NRs.     

Enhanced photocatalytic activity of graphene–TiO2 composite under visible light irradiation

Novel graphene–TiO₂ (GR–TiO₂) composite photocatalysts were synthesized by hydrothermal method. During the hydrothermal process, both the reduction of graphene oxide and loading of TiO₂ nanoparticles on graphene were achieved. The structure, surface morphology, chemical composition and optical properties of composites were studied using XRD, TEM, XPS, DRS and PL spectroscopy. The absorption edge of TiO₂ shifted to visible-light region with increasing amount of graphene in the composite samples. The photocatalytic degradation of methyl orange (MO) was carried out using graphene–TiO₂ composite catalysts in order to study the photocatalytic efficiency. The results showed that GR–TiO₂ composites can efficiently photodegrade MO, showing an enhanced photocatalytic activity over pure TiO₂ under visible-light irradiation. The enhanced photocatalytic activity of the composite catalysts might be attributed to great adsorptivity of dyes, extended light absorption range and efficient charge separation due to giant π-conjugation system and two-dimensional planar structure of graphene.     

Synthesis of samarium- and nitrogen-co-doped TiO2 by modified hydrothermal method and its photocatalytic performance for the degradation of 4-chlorophenol

Sm- and nitrogen-co-doped TiO₂ (Sm-N-TiO₂) catalysts were prepared via the modified hydrothermal method using tetrabutyl titanate as the precursor and calcination at 200 °C. The microstructure of the sample was characterized by X-ray diffraction (XRD), ultraviolet-visible diffuse reflection spectroscopy (UV-vis-DRS), Fourier transform infrared (FTIR) spectra and X-ray photoelectron spectroscopy (XPS). The average particle size was ca. 16.0 nm as calculated from XRD patterns. Sm-N-TiO₂ nanocrystalline showed strong visible-light response and high photocatalytic activity for 4-chlorophenol degradation under irradiation by visible-light (400-500 nm). The high visible-light photocatalytic activity of the obtained Sm-N-TiO₂ might result from the incorporation of nitrogen atoms in TiO₂, which extended the spectral response to the visible region, and Sm₂O₃ facilitated the excited electron transfer and hence suppressed efficiently the recombination of photoproduced electron-hole.     

Preparation, characterization and visible-light photocatalytic activity of AgI/AgCl/TiO2

In this paper, a novel composite photocatalyst AgI/AgCl/TiO₂ was prepared by ion exchange method and characterized by XRD, SEM and UV-Vis spectrometry. The as-prepared AgI/AgCl/TiO₂ composites show much higher photocatalytic activity than AgCl/TiO₂ and AgI/TiO₂ under visible-light irradiation (λ > 400 nm) in the process of methyl orange (MO) degradation. When the molar percentage of AgI to initial AgCl is 20% (sample SE-20%), the maximal degradation efficiency of MO has reached 85.8% after irradiation for 120 min. The enhancement of photocatalytic activity of the composite photocatalyst AgI/AgCl/TiO₂ will be attributed to its good absorption in the visible-light region, especially low recombination rate of the electron-hole pairs based on the photoluminescence (PL) spectra investigation of AgI/AgCl/TiO₂ and the matching band structures of AgI, AgCl and TiO₂. The detection of reactive species by radical scavengers displays that O₂⁻ and H₂O₂ are the main reactive species for the degradation of MO under visible-light irradiation. Moreover, PL analysis by using terephthalic acid (TA) as a probe molecule further reveals that OH can be negligible for the degradation of MO.     

Magnéli相亚氧化钛Ti8O15的电子结构和光学性能的第一性原理研究

采用基于密度泛函理论的平面波超软赝势法研究了Magnéli相亚氧化钛Ti₈O₁₅的电子结构和光学性能. 计算出的能带结构显示Ti₈O₁₅相比锐钛型TiO₂禁带宽度大幅度降低. 态密度分析表明, 其原因在于Ti₈O₁₅的O原子的2p轨道以及Ti原子的3p, 3d轨道相对于TiO₂的相应轨道向左产生了偏移, 同时由于O原子的缺失使得Ti原子的3d, 3p轨道多余电子在Fermi能级附近聚集形成新的电子能级. 态密度分析结果还显示, 相对于TiO₂, Ti₈O₁₅ Fermi能级附近电子格局发生了如下变化: O原子的2p轨道电子贡献减少, Ti原子的3d轨道的电子对Fermi能级贡献增大. 光吸收计算图谱表明, TiO₂仅在紫外光区有较高的光吸收能力, 而Ti₈O₁₅由于禁带宽度变窄引起光吸收范围红移到可见光区, 从而在紫外光区和可见光区都有较高的光吸收能力, 计算结果与实验得到的紫外-可见漫反射吸收光谱结果一致. 关键词： 第一性原理 8O₁₅')" href="#">Magnéli相亚氧化钛Ti₈O₁₅ 电子结构 光学性能     

Study on the properties and charge generation in dye-sensitized n-TiO2|dye|p-CuI solid state photovoltaic solar cells

Transparent semiconducting copper iodide (CuI) films were prepared by XeCl Excimer laser and their characteristics are investigated. These films exhibited optical transmittance over 80% in the wavelength range from 400 to 900 nm and minimum resistivity of about 2 kΩ cm⁻¹. The optical absorption of the these films shows a remarkable blue shift compared to that of polycrystalline of CuI, which can be explained from the viewpoint formation of ultra fine of CuI grains. The titanium dioxide (TiO₂) films have been prepared by sol-gel method. The properties of pulsed laser deposited CuI and TiO₂ films in power output of n-TiO₂|dye|p-CuI cells is studied. An efficient charge generation is observed through the illumination of TiO₂ layer of the fabricated n-TiO₂|dye|p-CuI solid state photovoltaic solar cells. From the current-voltage characteristics, the fill factor and power conversion efficiency were about of 45 and 3%, respectively. The maximum photo-current of about 12.5 mA/cm² and photo-voltage of 475 mV under AM 1.5 conditions were obtained for the n-TiO₂|dye|p-CuI solid states photovoltaic solar cells with good reproducibility. Adsorbed dye molecules to the TiO₂ surface act as a relay, especially under illumination through TiO₂ layer in the wave range region of 300-400 nm.     

Electronic and geometric properties of alkali-C60 molecules

First-principle electronic structure calculations are carried out for M_xC ₆₀ ^q , where M = Li, Na, K and ( x , q ) = (1, 0),(1,±1),(2, 0),(3, - 1),(6, 0),(6, - 1),(12, 0) using the local density functional. The electric dipole moment for MC₆₀ agrees with the experimental results. The calculated Mulliken charge indicates that the bonding of the alkali atom with C₆₀ is mostly ionic except for lithium. The alkali atom prefers to make many bonds with the carbon atoms rather than a single bond with the neighbor carbon atom. The calculated adsorption energy suggest that the metal-metal bonding of sodiums and potassiums on C₆₀ arises for more than the six valence electrons in the alkali atoms. The lithium-lithium bond is, on the other hand, not appeared for x ? 12. The difference in the most stable geometry between lithiums and the other alkali atoms on C₆₀ comes from the covalent character of the lithium-carbon bond.     

外电场下二氧化锆的分子结构及其特性

对O原子采用6-311++G*基组,Zr原子采用aug-cc-pVTZ-PP基组,利用密度泛函(B3P86)方法优化得到了ZrO2分子的稳定构型,并研究了不同外电场(0—0.025 a.u.)作用下ZrO2基态分子键长、能量、电荷分布、偶极矩和能级的变化规律.在优化构型的基础上,利用含时密度泛函(TD-B3P86)方法研究了ZrO2分子在外电场作用下前6个激发态的激发能、跃迁波长和振子强度的激发特性.研究结果表明:随着电场强度的增大,Zr—2O的键长增大,而Zr—3O的键长均匀减少,总能量降低,偶极矩增大;最高占据轨道能量基本保持不变,最低未占据轨道和能隙均减小.电场的增大使得激发能减小,各个激发态跃迁波长均发生不同程度的红移现象,因而,利用外电场可以控制ZrO2的发光光谱范围在可见-红外区域扩展.     

X-ray spectroscopic study of the electronic structure of visible-light responsive N-, C- and S-doped TiO2

The electronic origins of the visible-light response of N-, C- and S-doped TiO₂ have been studied using X-ray absorption, X-ray emission, and X-ray photoelectron spectroscopies. New electronic states are observed in the bulk band gap, above the valence band edge of pure TiO₂, which can be directly related to the visible-light absorption of the N-, C- and S-doped TiO₂ materials.     

Chiral optical absorption bands in [ ]Cd1−x Mnx Ga2S4 semiconducting compound

[ ]Cd_1−x Mn_x Ga₂S₄ is a semimagnetic semiconductor and it has revealed an exceptional property namely ‘optical activity‘. Therefore, a spectroscopic investigation of chiral absorption bands has been carried out with the view to examine the role of d*-d states of manganese atoms. It has been found that inner transitions of Mn⁺⁺ dominate the spectral region with a special feature, indicating that these transitions show the presence of a substantial contribution from the magnetic dipole moment which rotates the electric vector of the incident polarized radiation. The origin is associated to the lack of a symmetry center caused by the ordered vacancies in this defect compound.     

锐钛矿型TiO2(101)面原子几何及弛豫结构的第一性原理计算

采用平面波超软赝势方法计算了锐钛矿型TiO₂(101)面的表面能和表面原子弛豫结构.首先对TiO₂(101)面的6种不同的表面原子终止结构的体系总能量进行了计算,结果表明终止原子为两配位的O原子、次层为五配位的Ti原子的表面结构最为稳定.针对该表面研究了表面能和原子弛豫与模型中原子层数和真空厚度的关系,当原子层数为12层,真空厚度为0.4nm时,表面能收敛度小于0.01J/m².研究发现:表面上两配位的O原子向里移动约0.0012nm,五配 关键词： 第一性原理 2')" href="#">TiO₂ 表面结构 弛豫     

(Mo + N) codoped TiO2 for enhanced visible-light photoactivity

A series of Ti_1−xMo_xO_2−yN_y samples were prepared by using sol-gel method and characterized by X-ray diffraction, transmission electron microscopy and UV-vis absorption spectroscopy. All Ti_1−xMo_xO_2−yN_y samples are anatase phase. It is found that Mo, N mono-doping can increase visible light absorption, while (Mo + N) co-doping can greatly enhance absorption in whole visible region. Results of our first-principles band structure calculations reveal that (Mo + N)-doping, especially passivated co-doping can increase the up-limit of dopant concentration and create more impurity bands in the band gap of TiO₂, which leads to a greatly increase of its visible-light absorption without a decrease of its redox potential. It reveals that (Mo + N) co-doped TiO₂ is promising for a photocatalyst with high photocalystic activity under visible light.