Experimental study of the vibrations of acetylene chemisorbed on Ni(111)

High resolution electron energy-loss measurements of normal and deuterated acetylene chemisorbed on Ni(111) have been obtained. Observed vibrational modes are identified using the frequency shifts for the deuterated species and comparisons to the free molecule and a di-cobalt compound of acetylene. These vibrational frequencies indicate that chemisorbed acetylene is strongly rehybridized having a state of hybridization between ~sp^2.5 and sp³. Consideration of the types of modes observed, their assignments and the surface selection rule suggests a molecular orientation with the C-C bond axis slightly skewed relative to the surface and with the plane of the distorted molecule normal to the surface. A bonding geometry is proposed which has the carbon atoms residing above two adjacent 3 fold hollow sites of the Ni surface. This molecular geometry differs from that deduced previously by electron energy-loss spectroscopy for molecularly adsorbed acetylene on Pt(111).     

Low temperature electron energy loss spectra of acetylene chemisorbed on metal single-crystal surfaces; Cu(111), Ni(110) and Pd(110)

Vibrational spectra of acetylene chemisorbed on Cu(111), Ni(110) and Pd(110) at 110–120 K were measured using electron energy loss spectroscopy. Loss peaks were assigned to vibrational modes of the non-dissociatively adsorbed molecules with the aid of the corresponding C₂D₂ spectra. The spectra show that the molecules undergo significant rehybridisation on adsorption. Comparisons are made with the spectra of acetylene adsorbed on a range of other transition metal surfaces at low temperature. Taking into account these and earlier literature results, two distinct patterns of spectra are observed (Type A and Type B) for specular spectra. The Cu(111) spectrum is classified as Type A while the Ni(110) and Pd(110) spectra are classified as Type B. Suggestions are made for the structures of the surface species corresponding to the two spectral types.     

A vibrational study of ammonia chemisorbed on Ni(110) and Ni(111): whither goest the metal-nitrogen stretching mode on FCC (111) surfaces?

The adsorption of ammonia on the Ni(110) and Ni(111) surfaces has been studied with high resolution (≤ 65 cm_?1) electron energy loss spectroscopy (EELS) combined with thermal desorption spectroscopy. The EELS spectra of the initial chemisorbed layer or α state on each surface are very different. Ammonia chemisorbed on the Ni(110) surface exhibits a strong Ni-N stretching mode at 570 cm^?1 which is absent on the Ni(111) surface. The Ammonia adsorption site appears to be different on the Ni(110) and Ni(111) surfaces. We suggest that the absence of the M-N stretching mode on the Ni(111) surface is a general characteristic of the ammonia adsorption site on the (111) surfaces of fcc Group VIII metals.     

Theoretical determination of the structure of acetylene on Pt(111)

An atom superposition and electron delocalization technique applied to acetylene chemisorption on small cluster models for the Pt(111) surface shows preference for the triangular site as deduced from electron energy loss analyses by Ibach and Lehwald. This confirms the applicability of Badger's and related rules in this instance. Calculations on CCH₃ produce a structure in agreement with a dynamic LEED analysis at 400 K by Kesmodel, Dubois and Somorjai. Structures of CCH₂ and CHCH₂ are calculated and these species are found to be less stable than acetylene and CCH₃, respectively, when chemisorbed on Pt(111).     

Improved resolution in HREELS using maximum-entropy deconvolution: CO on PtxNi1−x(111)

High-resolution electron energy loss spectroscopy (HREELS) has been used to study stretch vibrations of CO chemisorbed at low coverage on Pt_xNi_1−x(111). Bayesian probability theory along with the entropic prior (Maxent) has been employed to deconvolve the apparatus function and to improve the apparent energy resolution. Maxent has proven very successful in a wide range of inversion problems. Here the resolution enhancement enables the positions of CO on the PtNi surface to be identified. It appears that CO is predominantly on top of Ni with the Ni atoms coordinated threefold laterally and with Ni in linear chains or on top of Pt. Furthermore, the ratio of the Pt to the Ni peak is used to study the dependence of the Pt concentration in the first layer on the annealing temperature.     

NH3在Ni/Pt(111)和Ni/WC(001)表面上分解的第一性原理研究

采用密度泛函理论和slab模型,研究NH₃在Ni单原子层覆盖的Pt（111）和WC（001）表面上的物理与化学行为,计算了Ni单原子覆盖表面的电子结构以及NH₃的吸附与分解.表面覆盖的单原子层中,Ni原子的性质与Ni（111）面上的Ni原子明显不同.与Ni（111）相比,Ni/Pt（111）和Ni/WC（001）表面上Ni原子dz²轨道上的电子更多地转移到了其它位置,该轨道上电荷密度降低有利于NH₃吸附.在Ni/Pt（111）和Ni/WC（001）面上NH₃吸附能均大于Ni（111）,NH₃分子第一个N-H键断裂的活化能则明显比Ni（111）面上低,有利于NH₃的分解,吸附能增大使NH₃在Ni/Pt（111）和Ni/WC（001）面上更倾向于分解,而不是脱附.N₂分子的生成是NH₃分解的速控步骤,该反应能垒较高,说明N₂分子只有在较高温度下才能生成.WC与Pt性质相似,但Ni/Pt（111）和Ni/WC（001）的电子结构还是有差异的,与Ni（111）表面相比,NH₃在Ni/Pt（111）表面上分解速控步骤的能垒降低,而在Ni/WC（001）上却升高.要获得活性好且便宜的催化剂,需要对Ni/WC（001）表面做进一步改进,降低N₂分子生成步骤的活化能.     

Influence of the substrate structure on the bonding of chemisorbed acetylene to transition metal surfaces

The electronic spectrum of acetylene adsorbed on various transition metals has been measured by ultraviolet photoemission spectroscopy in various laboratories. At low temperatures (T < 150 K), all measurements concur in finding an electron spectrum that differs only moderately from the gas phase spectrum of acetylene. At room temperature, the electron spectrum of acetylene is reported to be similar to the low-temperature form on Ir(100) and Pt(100), but acetylene is reported to form an olefinic surface complex on Pd(111) and Pt(111) surfaces. In order to examine whether the surface structure of the substrate is responsible for the difference, we have measured the electronic spectrum of acetylene adsorbed on the Pd(100) and Ru(0001) surfaces. At 120 K, the spectrum of adsorbed acetylene is again a distorted gas phase spectrum on both surfaces. At 330 K, we find the acetylenic form (with a splitting of 2.5 eV of the σ-orbitals) on Pd(100) and an olefinic form on the basal plane of Ru. We conclude that the olefinic complex is proper to the threefold symmetry of the (111) and (0001) surfaces and the gas-like form is favored on the (100) surfaces of the fcc crystals.     

ESR of adsorbates on single crystal metal surfaces under UHV conditions

Angular dependent electron spin resonance measurements were taken for paramagnetic molecules adsorbed on metallic single crystal surfaces in UHV. For the hydrated Cu(NO₃)₂ complex on a Cu[111] surface an angular dependent ESR signal is recorded. The plane ofthe molecule is found to lie preferentially out of the surface plane. Experiments on chemisorbed molecular O₂ on Ag[110] at 25 K and NO on Pt[111] at 110 K show no sharp ESR signal characteristic for well localized moments. If one assumes that NO on Pt (respectively Pd) carries an unpaired spin, one can estimate a lower limit for the spin flip rate of π^?1>2×10⁹s^?.     

Vibration spectroscopy of benzene adsorbed on Pt(111) and Ni(111)

High resolution electron energy loss spectroscopy has been applied to study the adsorption of benzene (C₆H₆ and C₆D₆) on Pt(111) and Ni(111) single crystal surfaces between 140 and 320 K. The vibrational spectra provide evidence that benzene is chemisorbed with its ring parallel to the surface, predominantly π bonded to the platinum and nickel surface respectively. A significant frequency increase of the CH-out-of-plane bending mode, largest in the case of platinum, is observed compared to the free molecule. On both metals two phases of benzene exist simultaneously, characterized by a different frequency shift. The shifts are explained by electronic interaction between the metal d-orbitals and molecules adsorbed in on top and threefold hollow sites respectively. The vibrational spectra of the multilayer condensed phase of benzene exhibit the infrared active modes of the gasphase molecule as expected.     

Ethylene and acetylene adsorption on Cu(111) and Pt(111) studied by Auger spectroscopy

High resolution, electron impact excited, carbon Auger spectra of ethylene and acetylene adsorbed on Cu(111) and Pt(111) are compared. The spectra of ethylene on the two metals provide the first example of the sensitivity of AES to the nature of metal-adsorbate bonding for molecular adsorbates. The acetylene spectra are identical on the two metals. The changes in the carbon Auger spectra resulting from thermal decomposition of the two adsorbates on Pt(111) are discussed in the context of results from electron energy loss spectroscopy.     

AES and LEED studies of xenon adsorption on (100)NaCl

The thermal and electro impact behaviour of NO adsorbed on Pt(111) and Pt(110) have been studied by LEED, Auger spectroscopy, and thermal desorption. NO was found to adsorb non-dissociatively and with very similar low coverage adsorption enthalpies on the two surfaces at 300 K. In both cases, heating the adlayer resulted in partial dissociation and led to the appearance of N₂ and O₂ in the desorption spectra. The (111) surface was found to be significantly more active in inducing the thermal dissociation of NO, and on this surface the molecule was also rapidly desorbed and dissociated under electron impact. Cross sections for these processes were obtained, together with the desorption cross section for atomically bound N formed by dissociation of adsorbed NO. Electron impact effects were found to be much less important on the (110) surface. The results are considered in relation to those already obtained by Ertl et al. for NO adsorption on Ni(111) and Pd(111), and in particular, the unusual desorption kinetics of N₂ production are considered explicitly. Where appropriate, comparisons are made with the behaviour of CO on Pt(111) and Pt(110), and the adsorption kinetics of NO on the (110) surface have been examined.     

Infrared vibration spectroscopy of molecular adsorbates on tungsten using reflection inelastic electron scattering

The observation of adsorbate vibrational energies in the range, 30 ?, hv_vib ? 1000 meV, by electron-energy-loss spectroscopy, provides detailed information on the geometry of atomic and molecular complexes. The “surface normal dipole selection rule”, is discussed and illustrated with results obtained for CO and C₂H₂ adsorption on the principal low-index faces of tungsten, viz.: W(100), W(110) and W(111) using a high-resolution electron reflection spectrometer. Specifically, the behaviour of chemisorbedd diatomic carbon monoxide and polyatomic acetylene is compared as a function of coverage and surface crystallography. Comparison is made with the spectral information obtained by reflection infrared spectroscopy and recent ultraviolet photoelectron spectroscopy studies of the chemisorption binding energies. The energy loss spectra are discussed in terms of current adsorbate models and the possible formation of “distorted rehybridized surface molecular complexes” based on molecular orbital theories of organometallic compounds.     

Generalized susceptibilities and phonon anomalies in Pd and Pt metals

The generalized susceptibility, χ(q), in Pd and Pt for q along the [100], [110], [111], and [120] directions was determined from their APW and RAPW energy band structures, respectively, using the analytic tetrahedron linear energy scheme of Rath and Freeman. The band structures were previously found to yield Fermi surface radii, temperature dependencies of the static magnetic susceptibility, χ(T), resistivity, and a spin lattice relaxation, T₁T, in very good agreement with experiment. In the χ(q) calculations, we used 2048 tetrahedra in 1/48th irreducible BZ and the energy eigenvalues for bands 4, 5, and 6 which cross the Fermi energy as fitted to a Fourier series representation. The intraband parts of χ(q) at q = 0 for both metals are found to agree with the density of states at the Fermi energy to without 0.5%. Our results show that the dominant contribution to χ_intra arises from the dominant band 5 whose “jungle-gym” FS has strong nesting features; the main peak for Pd occurs at the same q value (= 0.65π/a) for q along the [0q0], [q, q, 0], and [q, q, q] directions. The locus of this main peak is a square in the (0, 0, 1) plane. The maximum of χ_intra for q along the [110] and [111] directions are 23% and 13%, respectively, higher than the value of χ(q) at q = 0. For q along the [010] and [120] directions, the peak is, however, lower than the value of χ_intra at q = 0. Hence, while phonon anomalies are predicted for the [110] and [111] directions, no anomaly is predicted for either the [100] or [120] direction. The predicted q value for the [110] anomaly, $\text{q}\text{= 0.65π/a}$ is close to the experimental value of ～0.7 π/a. Although there may be a hint of an anomaly at 0.56 [111] in the measurements, a more detailed investigation of this region is called for. For platinum, χ_intra for q along the [010], [110] and [111] directions has main peaks which occur at q = 0.68 π/a, 0.75 π/a, and 0.85 π/a, respectively. Here too, this main peak comes from the nesting of the jungle-gym Fermi surface which is not, however, as flat as that of palladium. Anomalies are predicted (although weaker in Pt than in Pd) along [110] and [111] but not along [100] and [120]. The [110] anomaly is close to the measured q value (～0.7–0.8 π/a). Also in agreement with experiment, we predict a weaker [110] anomaly for Pt than for Pd. In both Pd and Pt, weaker anomalies are predicted for the [111] direction than for the [110] direction.     

Effects of bimetallic modification on the decomposition of CH3OH and H2O on Pt/W(110) bimetallic surfaces

The decomposition pathways of methanol and water on Pt-modified W(110) bimetallic surfaces have been investigated using density functional theory (DFT), temperature-programmed desorption (TPD) and high-resolution electron energy loss spectroscopy (HREELS). The reaction of methanol on submonolayer and monolayer Pt-modified W(110) surfaces is compared to that on clean Pt(111) and W(110). Similar to clean W(110), the Pt/W(110) bimetallic surfaces remain active toward the dissociation of methanol, although the reaction pathway leading to the production of CH₄ is reduced on the bimetallic surfaces. The Pt/W(110) surfaces are also active toward the decomposition of water. These results are compared with previous studies of the reactions of H₂ and ethylene on Pt/W(110) bimetallic surfaces to reveal the different Pt-modification effects for the dissociation of oxygen-containing molecules.     

Temperature programmed desorption study of acetylene on a clean,H-covered,and O-covered Pt(111) surface

The reactions of acetylene on a clean, a H-covered and an O-covered Pt(111) surface were studied by temperature programmed desorption for various coverages of acetylene, and acetylene to H or O ratios. The desorption products were quantitatively determined. On a clean surface, acetylene decomposes to hydrogen and surface carbon. A small amount of self-hydrogenation to ethylene also occurs during decomposition. On a H-covered surface, hydrogenation to CH₄, C₂H₆, and ethylene, and decomposition to hydrogen and surface carbon occur simultaneously. The reactions on these two surfaces can be explained by the presence of two sites. One site is a bare surface Pt atom on which decomposition is the primary reaction pathway. The other site is a Pt atom with adsorbed H on which hydrogenation is the primary reaction pathway. On the O-covered surface, the decomposition reaction takes place together with an oxidation reaction which yields CO, CO₂, and water. The oxidation reaction probably proceeds via an intermediate that has a stoichiometry of CH. Results on the O-covered surface are consistent with the model that oxygen absorbs in islands, and the oxidation reaction takes place at the perimeter of the islands. These results are compared with those of ethylene reaction on the same Pt surfaces.     

Sum-frequency generation at electrochemical interfaces: Cyanide vibrations on Pt(111) and Pt(110)

We use optical sum-frequency generation to investigate the stretching vibrations of cyanide (CN^–) molecules chemisorbed from aqueous electrolytes on single-crystalline Pt(111)- and Pt(110)-electrode surfaces. For clean and well-ordered Pt(111) electrodes, a single vibrational band between 2080 and 2150 cm^–1 with a nonlinear frequency dependence on the potential is observed and assigned to the CN stretching vibration of chemisorbed cyanide. A second band between 2145 and 2150 cm^–1 with very weak potential dependence appears on a surface which was subjected to oxidation-reduction cycles and is attributed to cyanide associated with a microscopically disordered surface. This assignment is supported by preliminary results for a Pt(110) single-crystal electrode. On a well-ordered (110) surface a single and potential-dependent cyanide vibration between 2070 and 2112 cm^–1 is observed. After oxidation of the cyanide and readsorption, this band is replaced by a higher frequency band at 2144 cm^–1 which is essentially not potential-dependent. Occasionally, additional vibrational bands at lower frequencies not reported in corresponding IR studies are observed on Pt(111).Paper presented at the 129th WE-Heraeus-Seminar on Surface Studies by Nonlinear Laser Spectroscopies, Kassel, Germany, May 30 to June 1, 1994     

Thermal evolution of acetylene and ethylene on Pd(111)

The thermal evolution of acetylene and ethylene and their deuterated counterparts on a palladium (111) surface has been studied by high-resolution electron energy loss spectroscopy in the temperature range 150–500 K. Analysis of the vibrational spectra indicates that chemisorbed acetylene evolves at 300 K in the presence of surface hydrogen to mainly ethylidyne, CCH₃, and a small amount of residual acetylene. Spectra obtained with and without preadsorbed hydrogen provide evidence for a 〉C CH₂ intermediate in the reaction. Chemisorbed ethylene also evolves to ethylidyne after heating from 150 to 300 K but much of the ethylene desorbs. The high temperature (400–500 K) behavior of C₂H₂ and C₂H₄ involves formation of a CH species. Although a small amount of the CH species may be formed from the dehydrogenation of ethylidyne, it is found that carbon-carbon bond scission of acetylene near 400 K is the dominant mechanism in CH formation.     

The reaction of acetylene with Ni(100) and Ni(110) surfaces at room temperature

Ultraviolet photoemission spectroscopy using hv = 21.2 eV and filtered 40.8 eV radiation as well as temperature programmed thermal desorption spectroscopy are used to investigate the chemical reaction of acetylene with Ni(100) and Ni(110) surfaces at room temperature. Striking crystallographic effects and several coexisting phases are observed and found to be coverage and temperature dependent. A methodology is described and used to predict the relative energy levels for a variety of adsorbed hydrocarbon fragments on Ni surfaces. Such levels together with the thermal desorption spectra are used to identify the observed species. In particular, CH and CCH species are isolated on Ni(100) and Ni(110) surfaces, respectively, via low temperature adsorption and subsequent pulsed sample warming experiments. The room temperature adsorption phases are deduced using these ionization levels together with those of chemisorbcd acetylene, atomic hydrogen and carbon. At room temperature on Ni(100), H, C, CH and C₂H₂ species form together below 2 L exposure while CH species form thereafter, up to a saturation exposure of ~10 L. On Ni(110), H and CCH species form below 1.5 L exposure followed by the formation of CH₂ and likely CH species. The relative stabilities of these species at elevated temperatures is: C₂H₂ < CCH ? CH < CH₂. A model for the bonding of acetylene and its reaction to form CCH species on Ni(110) is proposed.     

Vibrational spectra of acetylene and ethylene adsorbed on Fe(110)

Vibrational spectra of normal and deuterated acetylene and ethylene adsorbed on a Fe(110) surface have been measured by high resolution low energy electron loss spectroscopy (EELS). For both acetylene and ethylene molecular adsorption at 120 K is evident. For a proper assignment of the vibrational modes the angular profiles of most of the losses have also been measured. Application of the EELS dipole selection and the Teller-Redlich product rule favors a triangular adsorption site (μ₃ site) on Fe(110) in a trans-bent and a trans-twisted configuration for acetylene and ethylene, respectively. Furthermore, a strong distortion of the acetylene and ethylene molecules close to a sp³ hybridization state is suggested. Above 340 K acetylene starts to decompose and the formation of CH_x intermediates is indicated followed by a complete loss of hydrogen at temperatures above 540 K. Ethylene begins to decompose into acetylene and hydrogen below 300 K.     

Adhesion and bonding of Pt/Ni and Pt/Co overlayers: Density functional calculations

The electronic and energetic properties of bimetallic surfaces Pt/Ni(111) and Pt/Co(111) are examined using the FP-LAPW (Full-PotentialLinearized Augmented Plane Wave) method by means of spin-polarized and non-polarized calculations. We present both the results of the shifts in the d-band centers when one metal (Pt) is pseudomorfically deposited on another with smaller lattice constant (Ni, Co) and those corresponding to the surface and adhesion energies. The surface is modeled by a seven layer slab separated in z direction by a vacuum region of six substrate layers. The results obtained for pure Ni, Co and Pt surfaces are presented in order to compare with experimental and theoretical data reported in the literature