Silver nanoparticles and silver ions stabilized in NaCl nanocrystals

This study presents a two-step synthesis of nanoparticles and the stabilization process of Ag ions in the matrix of NaCl nanocrystals. Ag⁺ ions are incorporated to NaCl with a new and attractive method that can be easily used for the different types of alkaline halides. The nanoparticles with predominant size found between 10 and 15 nm were stabilized on the surface and/or interior of NaCl nanocrystals using, in the first stages, the ionic-exchange property of zeolite A4. The optical properties of the materials were characterized through optical absorption, leading to well defined absorption bands located in the wave length values between 217–275 nm and 350–770 nm approximately, for Ag⁺ and AgNp, respectively. The antibacterial property of Ag ions and nanoparticles stabilized in NaCl was analyzed against gram-negative Escherichia Coli and Klebsiella bacteria. In order to quantify the antibacterial effect of Ag ions and nanoparticles the inhibition ratio was used as a parameter on the bacteria colonies grown in culture medium by conventional methods. Ag⁺ ions that were stabilized in NaCl nanocrystals show a mayor inhibition ratio in contact with Klebsiella bacteria, conversely Ag nanoparticles showed better results in contact with E. coli.     

One-pot green fabrication and antibacterial activity of thermally stable corn-like CNC/Ag nanocomposites

Corn-like cellulose nanocrystals/silver (CNC/Ag) nanocomposites were prepared by formic acid/hydrochloric acid hydrolysis of commercial microcrystalline cellulose (MCC), and redox reaction with silver ammonia aqueous solution (Ag(NH₃)₂(OH)) in one-pot green synthesis, in which the preparation and modification of CNCs were performed simultaneously and the resultant modified CNCs could be as reducing, stabilizing and supporting agents for silver nanoparticles. The influences of the Ag⁺ ion concentrations on the morphology, microstructure, and properties of the CNC/Ag nanocomposites were investigated. It is found that corn-like CNC/Ag nanocomposites containing Ag nanoparticles with diameter of about 20–40 nm were obtained. Compared to the MCCs, high crystallinity of 88.5 % and the maximum degradation temperature (T _max) of 364.5 °C can be achieved. Moreover, the CNC/Ag nanocomposites showed strong antibacterial activity against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. Furthermore, such nanocomposites can act as bifunctional nanofillers to improve thermal stability, mechanical property, and antibacterial activity of commercial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and poly(lactic acid).     

Immobilization of silver nanoparticles on silica microspheres

The silver nanoparticles (Ag NPs) have been immobilized onto silica microspheres through the adsorption and subsequent reduction of Ag⁺ ions on the surfaces of the silica microspheres. The neat silica microspheres that acted as the core materials were prepared through sol–gel processing; their surfaces were then functionalized using 3-mercaptopropyltrimethoxysilane (MPTMS). The major aims of this study were to immobilize differently sized Ag particles onto the silica microspheres and to understand the mechanism of formation of the Ag nano-coatings through the self-assembly/adsorption behavior of Ag NPs/Ag⁺ ions on the silica spheres. The obtained Ag NP/silica microsphere conglomerates were characterized by field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and energy-dispersive spectroscopy (EDS). Their electromagnetic wave shielding effectiveness were also tested and studied. The average particle size of the obtained Ag NPs on the silica microsphere was found that could be controllable (from 2.9 to 51.5 nm) by adjusting the ratio of MPTMS/TEOS and the amount of AgNO₃.     

Multiple Emulsion Templating of Hybrid Ag/SiO2 Capsules for Antibacterial Applications

Silver nanoparticles (NPs) encapsulated in amorphous silica shells are synthesized and evaluated for their antibacterial action using the Gram‐negative Escherichia coli bacterium. These inorganic capsules are synthesized using a new approach that comprises the use of oil‐in‐water‐in‐oil (O/W/O) multiple emulsions to fabricate SiO₂ capsules incorporating organically capped Ag NPs. This strategy is explored as a mean to promote the bioadhesion of the microorganisms to the silica rough surfaces while still keeping the system with a high surface area for the active metal. The results have shown that the hybrid capsules enable a slow release of cationic silver from the interior of the silica microsphere to the external medium probably through the pore channels in the shell. The antibacterial activity against E. coli is mainly determined by the Ag⁺ ion release rate, suggesting that these particulates can be employed as a robust system for prolonged used as an antimicrobial material.     

Study of interfacial charge transfer in nanosemiconductor–molecule composites

Interaction of sol–gel synthesized Ce–Ag‐codoped ZnO (CSZO) nanocrystals with (E)‐1‐(naphthalen‐1‐yl)‐2‐styryl‐1H‐phenanthro[9,10‐d]imidazole has been analysed. The synthesized nanocrystals and their composites with naphthyl styryl phenanthrimidazole have been characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X‐ray spectroscopy, X‐ray diffractometry, X‐ray photoelectron spectroscopy (XPS) lifetime and Fourier transform infrared spectroscopy and cyclic voltammetry. XPS shows doped silver and cerium in Ag⁰ and Ce⁴⁺ states, respectively_. SEM and TEM images of CSZO nanoparticles show that they appear to be 3D trapezoid and cocoon‐like shape. The selected area electron diffraction pattern supports the nanocrystalline character of the synthesized material. The percentages of doping of cerium and silver in CSZO are 0.54 (at.) and 0.34 (at.), respectively. From the energy levels of the materials used in the imidazole–CSZO composite, the dominant CT direction has been analysed. Theoretical investigation shows that the binding energy and energy gap of the imidazole composites are highly dependent on the nature of the silver oxide cluster and that charge transfer in the imidazole–Ag₄O₄ composite is faster than the same in other composites. Molecular docking technique has also been carried out to understand the imidazole–DNA interactions. Copyright © 2016 John Wiley & Sons, Ltd.     

Silver aggregates and twofold-coordinated tin centers in phosphate glass: A photoluminescence study

The optical properties of silver species in various oxidation and aggregation states and of tin centers in melt-quenched phosphate glasses have been assessed by optical absorption and photoluminescence (PL) spectroscopy. Glasses containing silver and tin, or either dopant, were studied. Emission and excitation spectra along with time-resolved and temperature-dependent PL measurements were employed in elucidating the different emitting centers observed and investigating on their interactions. In regard to silver, the data suggests the presence of luminescent single Ag⁺ ions, Ag⁺-Ag⁺ and Ag⁺-Ag⁰ pairs, and nonluminescent Ag nanoparticles (NPs), where Ag⁺-Ag⁰→Ag⁺-Ag⁺ energy transfer is indicated. Tin optical centers appear as twofold-coordinated Sn centers displaying PL around 400 nm ascribed to triplet-to-singlet electronic transitions. The optically active silver centers were observed in glasses where 8 mol% of both Ag₂O and SnO, and 4 mol% of Ag₂O were added. Heat treatment (HT) of the glass with the high concentration of silver and tin leads to chemical reduction of ionic silver species resulting in a large volume fraction of silver NPs and the vanishing of silver PL features. Further characterization of such heat-treated glass by transmission electron microscopy and X-ray photoelectron spectroscopy appears consistent with silver being present mainly in nonoxidized form after HT. On the other hand, HT of the glass containing only silver results in the quenching of Ag⁺-Ag⁰ pairs emission that is ascribed to nonradiative energy transfer to Ag NPs due to the positioning of the pairs near the surface of NPs during HT. In this context, an important finding is that a faster relaxation was observed for this nanocomposite in relation to a heat-treated glass containing both silver and tin (no silver pairs) as revealed by degenerate four-wave mixing spectroscopy. Such result is attributed to Ag NP→Ag⁺-Ag⁰ plasmon resonance energy transfer. The data thus indicates that energy transfer between Ag⁺-Ag⁰ pairs and NPs is bi-directional.     

Antibacterial activity of silver and zinc oxide nanoparticles produced by spark discharge in deionized water

Inorganic antibacterial agents such as metal nanoparticles (NPs) are very important in biomedical and pharmaceutical areas. There are many methods of synthesizing these NPs, but all of them have their own disadvantages. In this study, ultrasonic‐assisted spark discharge is employed to produce colloidal silver (Ag) and zinc oxide (ZnO) NPs which are stable without using any stabilizers or surfactants. Different tests such as X‐ray diffraction, field emission scanning electron microscopy, and ultraviolet–visible absorption spectroscopy are used for the characterization of the quantity and quality of these NPs, and their antibacterial activity is evaluated by the disk diffusion method and determination of the minimum inhibitory concentrations against Escherichia coli . The results show that the overall antibacterial activity of Ag NPs is higher than that of ZnO NPs.     

Synthesis and characterization of highly conductive Sn–Ag bimetallic nanoparticles for printed electronics

To synthesize low-cost, highly conductive metal nanoparticles for inkjet printing materials, we synthesized Sn–Ag bimetallic nanoparticles using a polyol process with poly(vinyl pyrrolidone). Because a surface oxidation layer forms on Sn nanoparticles, various compositions of Sn–xAg [x = 0, 20, 40, 60, 80, 100 (wt%)] nanoparticles were synthesized and characterized for the purpose of removing the β-Sn phase. The results of XPS, TEM, and XRD analyses confirm that the formation of a bimetallic phase, such as Ag₄Sn or Ag₃Sn, hinders the β-Sn phase and, consequently, leads to the removal of the surface oxidation layer. To measure the sheet resistance of various compositions of Sn–Ag nanoparticles, we made the ink that contains Sn–Ag by dispersing 10 wt% of Sn–Ag nanoparticles in methanol. The sheet resistance is decreased by the conductive Sn–Ag phases, such as the fcc, Ag₄Sn, and Ag₃Sn phases, but sharply increased by the low-conductive Sn nanoparticles and the surface oxidation layer on the Sn nanoparticles. The sheet resistance results confirm that 80Ag20Sn and 60Ag40Sn bimetallic nanoparticles are suitable candidates for inkjet printing materials.     

Superhydrophobic conductive textiles with antibacterial property by coating fibers with silver nanoparticles

Silver nanoparticles (Ag NPs) were produced on cotton fibers by reduction of [Ag(NH₃)₂]⁺ complex with glucose. Further modification of the fibers coated by Ag NPs with hexadecyltrimethoxysilane led to superhydrophobic cotton textiles. Scanning electron microscopy images of the textiles showed that the treated fibers were covered with uniform Ag NPs, which generate a dual-size roughness on the textiles favouring the formation of superhydrophobic surfaces, and the Ag NPs formed dense coating around the fibers rendering the intrinsic insulating cotton textiles conductive. Antibacterial test showed that the as-fabricated textiles had high antibacterial activity against the gram-negative bacteria, Escherichia coli. These multifunctional textiles might find applications in biomedical electronic devices.     

Surface-modified antibacterial TiO2/Ag nanoparticles: Preparation and properties

Studies were performed on surface modification of antibacterial TiO₂/Ag⁺ nanoparticles by grafting γ-aminopropyltriethoxysilane (APS). The interfacial structure of the modified particles was characterized by Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy and thermogravimetric analysis. The thickness of the surface layer was determined by using Auger electron spectroscopy (AES). The results show that APS is chemically bonded to the surface of antibacterial TiO₂/Ag⁺ nanoparticles. Furthermore, the modified particles were mixed in PVC to prepare composites whose antibacterial property was investigated. The results suggest that surface modification has no negative effect on antibacterial activity of TiO₂/Ag⁺ nanoparticles and PVC-TiO₂/Ag⁺ composites exhibits good antibacterial property.     

Optical,structural, and antibacterial properties of biosynthesized Ag nanoparticles at room temperature using Azadirachta indica leaf extract

We report an enhancement of antibacterial properties of Ag nanoparticles (NPs) synthesized at room temperature using leaf extract of Azadirachta indica (Neem) following green synthesis route. To study such antibacterial properties Ag NPs of sizes within 9 nm to 17 nm were synthesized by varying the concentration of Neam leaf extract (NLE). The NP size and size distribution were seen to increase and decrease, respectively, with increase in NLE concentration. Also Ag NPs having a fixed size (~26 nm) was also synthesized by varying the precursor (AgNO₃) concentration. It is noticed that concentration of NLE has significant effects on the control of NP size as well as size distribution whereas there is almost no role of precursor concentration of the NP size. All the Ag NPs are found to have face-centred-cubic crystal structure with preferential growth along (111) plane which is stable one. The peak of X-ray diffraction at ~32.4° (2θ value), which is prominent for low concentrations of NLE and precursor, is identified as (101) plane of Ag crystal. The generation and growth of Ag NPs had also been confirmed using electron microscopic studies. These Ag NPs show prominent surface plasmon resonance (SPR) absorption at ~ 420 nm confirming again the genesis of Ag NPs. The SPR peak shifts towards longer wavelength (redshift) with a corresponding reduction in full width at half maximum with increase in NP size. All of the samples containing Ag NPs show a broad blue photoluminescence (PL) emission at ~ 471 nm. Emission peak is seen to redshift with increase in NP size and is consistent with the optical absorption data. Such PL emission is argued as due to interband transition or plasmon luminescence. Being biocompatible of the green synthesis process, antibacterial properties of these Ag NPs were studies in details considering all the samples (with varied NP size for one set and with fixed NP size for other set of samples). As per our knowledge this is the first report of size related total study of Ag NPs, showing increased antibacterial effect as size decreased and equal antibacterial effect as size equals. It is found that smaller Ag NPs has enhanced antibacterial effects due to large surface area to volume ratio in comparison with bigger sized Ag NPs.     

Fabrication of composite based on GeSi with Ag nanoparticles using ion implantation

Comparative analysis of the structural and optical properties of composite layers fabricated with the aid of implantation of single-crystalline silicon (c-Si) using Ge⁺ (40 keV/1 × 10¹⁷ ions/cm²) and Ag⁺ (30 keV/1.5 × 10¹⁷ ions/cm²) ions and sequential irradiation using Ge⁺ and Ag⁺ ions is presented. The implantation of the Ge⁺ ions leads to the formation of Ge: Si fine-grain amorphous surface layer with a thickness of 60 nm and a grain size of 20–40 nm. The implantation of c-Si using Ag⁺ ions results in the formation of submicron porous amorphous a-Si structure with a thickness of about 50 nm containing ion-synthesized Ag nanoparticles. The penetration of the Ag⁺ ions in the Ge: Si layer stimulates the formation of pores with Ag nanoparticles with more uniform size distribution. The reflection spectra of the implanted Ag: Si and Ag: GeSi layers exhibit a sharp decrease in the intensity in the UV (220–420 nm) spectral interval relative to the intensity of c-Si by more than 50% owing to the amorphization and structuring of surface. The formation of Ag nanoparticles in the implanted layers gives rise to a selective band of the plasmon resonance at a wavelength of about 820 nm in the optical spectra. Technological methods for fabrication of a composite based on GeSi with Ag nanoparticles are demonstrated in practice.     

Corrosion processes of triangular silver nanoparticles compared to bulk silver

Excessive corrosion of silver nanoparticles is a significant impediment to their use in a variety of potential applications in the biosensing, plasmonic and antimicrobial fields. Here we examine the environmental degradation of triangular silver nanoparticles (AgNP) in laboratory air. In the early stages of corrosion, transmission electron microscopy shows that dissolution of the single-crystal, triangular, AgNP (side lengths 50–120 nm) is observed with the accompanying formation of smaller, polycrystalline Ag particles nearby. The new particles are then observed to corrode to Ag₂S and after 21 days nearly full corrosion has occurred, but some with minor Ag inclusions remaining. In contrast, a bulk Ag sheet, studied in cross section, showed an adherent corrosion layer of only around 20–50 nm in thickness after over a decade of being exposed to ambient air. The results have implications for antibacterial properties and ecotoxicology of AgNP during corrosion as the dissolution and reformation of Ag particles during corrosion will likely be accompanied by the release of Ag⁺ ions.     

Formation of nanoparticles of Ag in poly(vinyl methyl ether) hydrogel network by electron beam irradiation

Ag⁺ ions, in poly(vinyl methyl ether) (PVME) hydrogel network have been reduced by electron beam irradiation to produce Ag clusters as nanoparticles in fully reduced and highly pure state. XRD (X-ray diffraction) technique confirmed the zero valent state of silver. UV-visible absorption spectral characteristics of Ag cluster confirm that the PVME network is a very efficient stabilizer and prevents further aggregation of Ag clusters. From the results of TEM, it was found that Ag particles were homogenously dispersed in the PVME matrix.     

Plasmon enhanced CdS-quantum dot sensitized solar cell using ZnO nanorods array deposited with Ag nanoparticles as photoanode

CdS-quantum dot sensitized solar cell using ZnO nanorods (ZnO NRs) array deposited with Ag nanoparticles (Ag NPs) as photoanode was fabricated. Light absorption effect of Ag NPs on improvement of the cell performance was investigated. Performance improvement of metal nanoparticles (MNPs) was controlled by the structure design and architecture. Different decorations and densities of Ag NPs were utilized on the photoanode. Results showed that using 5% Ag NPs in the photoanode results in the increased efficiency, fill factor, and circuit current density from 0.28% to 0.60%, 0.22 to 0.29, and 2.18 mA/cm² to 3.25 mA/cm², respectively. Also, incident photon-to-current efficiencies (IPCE) results showed that cell performance improvement is related to enhanced absorption in the photoanode, which is because of the surface plasmonic resonance and light scattering of Ag NPs in the photoanode. Measurements of electrochemical impedance spectroscopy revealed that hole transfer kinetics increases with introduction of Ag NPs into photoanode. Also, it is shown that chemical capacitance increases with introduction of Ag NPs. Such increase can be attributed to the surface palsmonic resonance of Ag NPs which leads to absorption of more light in the photoanode and generation of more photoelectron in the photoanode.     

Facile synthesis of multifunctional Ag/Fe3O4-CS nanocomposites for antibacterial and hyperthermic applications

Nanocomposites containing two or more functional constituents are attractive candidates for advanced nanomaterials. In this study, multifunctional Ag/Fe₃O₄-CS nanocomposites were successfully prepared, using chitosan as a stabilizing and cross-linking agent. The as-synthesized nanocomposites were characterized by Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), X-ray diffraction (XRD), Energy-dispersive X-ray spectroscopy (EDS), UV–visible spectrophotometer (UV–Vis) and vibrating sample magnetometer (VSM). The results demonstrated that Ag/Fe₃O₄-CS composite nanoparticles (NPs) were composed of parent components, Fe₃O₄ and Ag NPs, which were uniformly dispersed in the chitosan matrix. The hybrid NPs exhibited strong antibacterial property against Pseudomonas aeruginosa. With high magnetization value (67 emu/g), the synthesized Ag/Fe₃O₄-CS composite can be easily separated or recycled in potential biomedical applications. Furthermore, the results showed that the multicomponent hybrid nanostructures appeared to be the promising material for local hyperthermia, which can be used as thermoseeds for localized hyperthermia treatment of cancers.     

Identification of two Ag‐2,2′:6′,2″‐terpyridine surface species on Ag nanoparticle surfaces by excitation wavelength dependence of SERS spectra and factor analysis: evidence for chemical mechanism contribution to SERS of Ag(0)–tpy

Measurement and interpretation of the excitation wavelength dependence of surface‐enhanced Raman scattering (SERS) spectra of molecules chemisorbed on plasmonic, e.g. Ag nanoparticle (NP) surfaces, are of principal importance for revealing the charge transfer (CT) mechanism contribution to the overall SERS enhancement. SERS spectra, their excitation wavelength dependence in the 445–780‐nm range and factor analysis (FA) were used for the identification of two Ag‐2,2′:6′,2″‐terpyridine (tpy) surface species, denoted Ag⁺–tpy and Ag(0)–tpy, on Ag NPs in systems with unmodified and/or purposefully modified Ag NPs originating from hydroxylamine hydrochloride‐reduced hydrosols. Ag⁺–tpy is a spectral analogue of [Ag(tpy)]⁺ complex cation, and its SERS shows virtually no excitation wavelength dependence. By contrast, SERS of Ag(0)–tpy surface complex generated upon chloride‐induced compact aggregate formation and/or in strongly reducing ambient shows a pronounced excitation wavelength dependence attributed to a CT resonance (the chemical mechanism) contribution to the overall SERS enhancement. Both the resonance (λ_exc = 532 nm) and off‐resonance (λ_exc = 780 nm) pure‐component spectra of Ag(0)–tpy obtained by FA are largely similar to surface‐enhanced resonance Raman scattering (λ_exc = 532 nm in resonance with singlet metal to ligand CT (¹ MLCT) transition) and SERS (λ_exc = 780 nm) spectra of [Fe(tpy)₂]²⁺ complex dication. Copyright © 2014 John Wiley & Sons, Ltd.     

Expandable photo-induced synthetic route to generate highly controlled noble metal nanoparticles

A photo-stimulation strategy was applied to synthesize colloidal noble-metal nanoparticles (NPs) with a highly controlling of size and morphology with high yield at room temperature. In this controlled synthesis, photoreduction of a mixture of the noble metal precursor and a chemical reducing agent under ultraviolet (UV) illumination was used to produce electrons that reduce metal ions (Au³⁺ and Ag⁺) in toluene. Prolonged UV irradiation at 365 nm at a power of 0.14 μmol S⁻¹ m⁻² induced ripening wherein the irradiation power, exposure time, and chemical interaction of the reducing and stabilizing agents were key factors in determining the nanoscale structure of the NPs. Under optimal irradiation and chemical conditions, size and shape deviations of <6% of the Au and Ag NPs were obtained.     

The mechanism of metal nanoparticle formation in plants: limits on accumulation

Metal nanoparticles have many potential technological applications. Biological routes to the synthesis of these particles have been proposed including production by vascular plants, known as phytoextraction. While many studies have looked at metal uptake by plants, particularly with regard to phytoremediation and hyperaccumulation, few have distinguished between metal deposition and metal salt accumulation. This work describes the uptake of AgNO₃, Na₃Ag(S₂O₃)₂, and Ag(NH₃)₂NO₃ solutions by hydroponically grown Brassica juncea and the quantitative measurement of the conversion of these salts to silver metal nanoparticles. Using X-ray absorption near edge spectroscopy (XANES) to determine the metal speciation within the plants, combined with atomic absorption spectroscopy (AAS) for total Ag, the quantity of reduction of Ag^I to Ag⁰ is reported. Transmission electron microscopy (TEM) showed Ag particles of 2–35 nm. The factors controlling the amount of silver accumulated are revealed. It is found that there is a limit on the amount of metal nanoparticles that may be deposited, of about 0.35 wt.% Ag on a dry plant basis, and that higher levels of silver are obtained only by the concentration of metal salts within the plant, not by deposition of metal. The limit on metal nanoparticle accumulation, across a range of metals, is proposed to be controlled by the total reducing capacity of the plant for the reduction potential of the metal species and limited to reactions occurring at an electrochemical potential greater than 0 V (verses the standard hydrogen electrode).     

Effect of surface charge on the colloidal stability and in vitro uptake of carboxymethyl dextran-coated iron oxide nanoparticles

An easy and novel routine are reported for the preparation of metallic silver nanoparticles (AgNPs) with controlled morphology, using Na⁺–magadiite swelled with hexadecyltrimethylammonium bromide (CTA⁺–magadiite) and a layered aluminophosphate with kanemite-type structure modified with n-dodecylammonium and n-butylammonium (but,dod-AlPO-kan) as hosts. For the preparation of the metallic AgNPs (Ag⁰) in the interlamellar space, the CTA⁺–magadiite and but,dod-AlPO-kan hosts were dispersed in N,N-dimethylformamide (DMF) solution with different AgNO₃ concentrations. DMF acts as reducing agent of Ag⁺ ions leading to nanoparticles with disk-like morphology of magadiite silicate; these were characterized by TEM and UV–Vis spectroscopy. On the other hand, the AgNPs are intercalated in but,dod-AlPO-kan showing spherical-like morphology. The UV–Vis spectra of the nanocomposites based on Ag⁰ and magadiite silicate show bands at 565 nm that can be attributed to Ag⁰ nanodisks. The Ag-but,dod-AlPO-kan-based nanocomposites present a band at 422 nm attributed to the surface plasmon resonance of Ag⁰ nanospheres. The results of transmission electron microscopy agree very well with XRD and UV–Vis analysis, indicating the formation of AgNPs with different morphologies using the two kinds of lamellar materials. The magadiite host has an important role in the synthesis of Ag nanodisks, because it controls the growth of nanoparticles inside the interlayer region with disk-like morphology due the high interlayer interactions of the silicate, leading to the growth of nanoparticles in only two directions (xy plane). On the other hand, when but,dod-AlPO-kan is used a sphere-like morphology is preferred due the best accommodation of AgNPs between the layers of aluminophosphate host.