Optimization of ultrasonic-assisted approach for synthesizing a highly stable biocompatible bismuth-coated iron oxide nanoparticles using a face-centered central composite design

The incorporation of additional functional groups such as bismuth nanoparticles (Bi NPs) into magnetite nanoparticles (Fe₃O₄ NPs) is critical for their properties modification, stabilization, and multi-functionalization in biomedical applications. In this work, ultrasound has rapidly modified iron oxide (Fe₃O₄) NPs via incorporating their surface through coating with Bi NPs, creating unique Fe₃O₄@Bi composite NPs. The Fe₃O₄@Bi nanocomposites were synthesized and statistically optimized using an ultrasonic probe and response surface methodology (RSM). A face-centered central composite design (FCCD) investigated the effect of preparation settings on the stability, size, and size distribution of the nanocomposite. Based on the numerical desirability function, the optimized preparation parameters that influenced the responses were determined to be 40 ml, 5 ml, and 12 min for Bi concentration, sodium borohydride (SBH) concentration, and sonication time, respectively. It was found that the sonication time was the most influential factor in determining the responses. The predicted values for the zeta potential, hydrodynamic size, and polydispersity index (PDI) at the highest desirability solution (100%) were −45 mV, 122 nm, and 0.257, while their experimental values at the optimal preparation conditions were −47.1 mV, 125 nm, and 0.281, respectively. Dynamic light scattering (DLS) result shows that the ultrasound efficiently stabilized and functionalized Fe₃O₄NPs following modification to Fe₃O₄@Bi NPs, improved the zeta potential value from –33.5 to −47.1 mV, but increased the hydrodynamic size from 98 to 125 nm. Energy dispersive spectroscopy (EDX) validated the elemental compositions and Fourier transform infrared spectroscopy (FTIR) confirmed the presence of Sumac (Rhus coriaria) compounds in the composition of the nanocomposites. The stability and biocompatibility of Fe₃O₄@Bi NPs were improved by using the extract solution of the Sumac edible plant. Other physicochemical results revealed that Fe₃O₄NPs and Fe₃O₄@Bi NPs were crystalline, semi-spherical, and monodisperse with average particle sizes of 11.7 nm and 19.5 nm, while their saturation magnetization (Ms) values were found to be 132.33 emu/g and 92.192 emu/g, respectively. In vitro cytotoxicity of Fe₃O₄@Bi NPs on the HEK-293 cells was dose- and time-dependent. Based on our findings, the sonochemical approach efficiently produced (and RSM accurately optimized) an extremely stable, homogeneous, and biocompatible Fe₃O₄@Bi NPs with multifunctional potential for various biomedical applications.     

Synthesis and characterization of Fe3O4@C@Ag nanocomposites and their antibacterial performance

We synthesized Fe₃O₄@C@Ag nanocomposites through a combination of solvothermal, hydrothermal, and chemical redox reactions. Characterization of the resulting samples by X-ray diffraction, Fourier-transform infrared spectroscopy, field-emission scanning and transmission electron microscopy, and magnetic measurement is reported. Compared to Fe₃O₄@Ag nanocomposites, the Fe₃O₄@C@Ag nanocomposites showed enhanced antibacterial activity. The Fe₃O₄@C@Ag nanocomposites were able to almost entirely prevent growth of Escherichia coli when the concentration of Ag nanoparticles was 10 μg/mL. Antibacterial activity of the Fe₃O₄@C@Ag nanocomposites was maintained for more than 40 h at 37 °C. The intermediate carbon layer not only protects magnetic core, but also improves the dispersion and antibacterial activity of the silver nanoparticles. The magnetic core can be used to control the specific location of the antibacterial agent (via external magnetic field) and to recycle the residual silver nanoparticles. The Fe₃O₄@C@Ag nanocomposites will have potential uses in many fields as catalysts, absorbents, and bifunctional magnetic-optical materials.     

Control synthesis of magnetic Fe3O4–chitosan nanoparticles under UV irradiation in aqueous system

Novel magnetic Fe₃O₄–chitosan nanoparticles were synthesized via photochemical method in an emulsifier-free aqueous system at room temperature for the first time. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) results showed that the Fe₃O₄–chitosan nanoparticles were in regular shape with a mean diameter of 41 nm, whereas the average size in aqueous solution measured by photocorrelation spectroscopy (PCS) was 64 nm, which indicated that the nanoparticles had water-swelling properties. X-ray diffraction (XRD) patterns indicated that the Fe₃O₄ nanoparticles were pure Fe₃O₄ with a spinel structure, and the irradiation under UV light did not result in a phase change. The Fe₃O₄–chitosan nanoparticles were also characterized by Fourier transform infrared (FTIR) spectra, thermogravimetric analysis (TGA) and vibrating sample magnetometer (VSM). Magnetic measurement revealed that the saturated magnetization (Ms) of the Fe₃O₄–chitosan nanoparticles reached 48.6 emu/g and the nanoparticles showed the characteristics of superparamagnetism. The stability test showed these novel nanoparticles had high magnetic stability. The PCS and TGA results indicated that the size and chitosan content of Fe₃O₄–chitosan nanoparticles formed was pH- and chitosan/Fe₃O₄ ratio-dependent, which could be used to synthesize magnetic Fe₃O₄–chitosan nanoparticles with different size to meet the requirements of different applications.     

Synthesis of boron nitride nanostructures from catalyst of iron compounds via thermal chemical vapor deposition technique

For the first time, patterned growth of boron nitride nanostructures (BNNs) is achieved by thermal chemical vapor deposition (TCVD) technique at 1150 °C using a mixture of FeS/Fe₂O₃ catalyst supported in alumina nanostructured, boron amorphous and ammonia (NH₃) as reagent gas. This innovative catalyst was synthesized in our laboratory and systematically characterized. The materials were characterized by X-ray diffraction (XRD), Raman spectroscopy, Fourier-transform infrared spectroscopy (FTIR), Thermogravimetric analysis (TGA), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The X-ray diffraction profile of the synthesized catalyst indicates the coexistence of three different crystal structures showing the presence of a cubic structure of iron oxide and iron sulfide besides the gamma alumina (γ) phase. The results show that boron nitride bamboo-like nanotubes (BNNTs) and hexagonal boron nitride (h-BN) nanosheets were successfully synthesized. Furthermore, the important contribution of this work is the manufacture of BNNs from FeS/Fe₂O₃ mixture.     

Comparative study of Pt, Au and Ag growth on Fe3O4(0 0 1) surface

The epitaxial growth of Pt, Au and Ag layers on Fe₃O₄(0 0 1) as a function of temperature and thickness have been studied. The layers were deposited by sputtering in an ultra high vacuum chamber and the structural properties were investigated by Reflection High Energy Electron Diffraction, X-ray reflectivity and diffraction, High Resolution Transmission Electron Microscopy and Atomic Force Microscopy. Our studies give evidence for three different growth behaviours depending both on the nature of the metals and the temperature. Comparison between the growth modes of the three metals will be discussed in relation with surface and interfaces energies.     

Synthesis of composite gold/tin-oxide nanoparticles by nano-soldering

Composite Au–SnO₂ nanoparticles (NPs) are synthesized by nano-soldering of pure Au and SnO₂ NPs. The multi-step process involves synthesis of pure Au and SnO₂ NPs separately by nanosecond pulse laser ablation of pure gold and pure tin targets in deionized water and post-ablation laser heating of mixed solution of Au colloidal and SnO₂ colloidal to form nanocomposite. Transmission Electron Microscopy (TEM) and High-Resolution Transmission Electron Microscopy (HRTEM) were used to study the effect of laser irradiation time on morphology of the composite Au–SnO₂ NPs. The spherical particles of 4 nm mean size were obtained for 5 min of post-laser heating. Increased mean size and elongated particles were observed on further laser heating. UV–vis spectra of Au–SnO₂ nanocomposites show red shift in the plasmon resonance absorption peak and line shape broadening with respect to pure Au NPs. The negative binding energy shift of Au 4f_7/2 peak observed in X-ray Photoelectron Spectra (XPS) indicates charge transfer in the nano-soldered Au–SnO₂ between gold and tin oxide and formation of soldered nanocomposite.     

Synthesis and properties of hybrid hydroxyapatite–ferrite (Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>) particles for hyperthermia applications

Hybrid ceramics consisting of hydroxyapatite Ca₁₀(PO₄)₆(OH)₂ and ferrite Fe₃O₄ were synthesized using a two-stage procedure. The first stage included the synthesis of Fe₃O₄ ferrite particles by co-precipitation and the synthesis of hydroxyapatite. In the second stage, the magnetic hybrid hydroxyapatite–ferrite bioceramics were synthesized by a thorough mixing of the obtained powders of carbonated hydroxyapatite and Fe₃O₄ ferrite taken in a certain proportion, pressing into tablets, and annealing in a carbon dioxide atmosphere for 30 min at a temperature of 1200°C. The properties of the components and hybrid particles were investigated using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Mössbauer spectroscopy. The saturation magnetization of the hybrid ceramic composite containing 20 wt % Fe₃O₄ was found to be 12 emu/g. The hybrid hydroxyapatite (Ca₁₀(PO₄)₆(OH)₂)–ferrite Fe₃O₄ ceramics, which are promising for the use in magnetotransport and hyperthermia treatment, were synthesized and investigated for the first time.     

Full Protection for Graphene‐Incorporated Micro‐/Nanocomposites Containing Ultra‐small Active Nanoparticles: the Best Li‐Storage Properties

In recent years, graphene‐incorporated micro‐/nanocomposites represent one of the hottest developing directions for the composite materials. However, a large number of active nanoparticles (NPs) are still in the unprotected state in most constructed graphene‐containing designs, which will seriously impair the effects of the graphene additives. Here, a fully protected Fe₃O₄‐based micro‐/nanocomposite (G/Fe₃O₄@C) is rationally developed by carbon‐boxing the common graphene/Fe₃O₄ microparticulates (G/Fe₃O₄). The processes and results of full protection are tracked in detail and characterized by X‐ray diffraction, X‐ray photoelectron spectroscopy, and nitrogen absorption–desorption isotherms, as well as scanning and transition electron microscopy. When used as the anode for lithium‐ion batteries, the fully protected G/Fe₃O₄@C exhibits the best lithium‐storage properties in terms of the highest rate capabilities and the longest cycle life compared to the common G/Fe₃O₄ composites and commercial Fe₃O₄ products. These much improved properties are mainly attributed to its novel structural features including complete protection of active Fe₃O₄ nanoparticles by the surface carbon box, a robust conductive network composed of nitrogen‐doped graphene nanosheets, ultra‐small Fe₃O₄ NPs of 4–5 nm, abundant mesopores to accommodate the volume variation during cycling, and micrometer‐sized secondary particles.     

Silane treatment of Fe3O4 and its effect on the magnetic and wear properties of Fe3O4/epoxy nanocomposites

In this study, the effect of silane treatment of Fe₃O₄ on the magnetic and wear properties of Fe₃O₄/epoxy nanocomposites was investigated. Fe₃O₄ nanopowders were prepared by coprecipitation of iron(II) chloride tetrahydrate with iron(III) chloride hexahydrate, and the surfaces of Fe₃O₄ were modified with 3-aminopropyltriethoxysilane. The magnetic properties of the powders were measured on unmodified and surface-modified Fe₃O₄/epoxy nanocomposites using SQUID magnetometer. Wear tests were performed on unmodified and surface-modified Fe₃O₄/epoxy nanocomposites under the same conditions (sliding speed: 0.18 m/s, load: 20 N).The results showed that the saturation magnetization (M_s) of surface-modified Fe₃O₄/epoxy nanocomposites was approximately 110% greater than that of unmodified Fe₃O₄/epoxy nanocomposites. This showed that the specific wear rate of surface-modified Fe₃O₄/epoxy nanocomposites was lower than that of unmodified Fe₃O₄/epoxy nanocomposites. The decrease in wear rate and the increase in magnetic properties of surface-modified Fe₃O₄/epoxy nanocomposites occurred due to the improved dispersion of Fe₃O₄ into the epoxy matrix.     

Study of carbon encapsulated iron oxide/iron carbide nanocomposite for hyperthermia

Magnetic nanocomposite has been synthesized successfully using biopolymer route which acts as a source of carbon for carbide formation. The present approach based on thermal decomposition represents a considerable advance over previous reports that often use high-energy procedures or costly and hazardous precursors. X-ray diffraction, high-resolution transmission electron microscopy and vibrating sample magnetometer have been used to characterize the composites. Multi phase formation is evident from X-ray diffraction in the as-prepared samples. Phase confirmation was further done from M (magnetization) versus T (temperature) curve indicating presence of different phases of carbide along with iron oxide. TEM study suggests formation of cuboidal shape nanocomposite using two different quenching conditions. Transmission electron microscopy also confirmed the formation of carbon layer in the vicinity of the Fe₃O₄/Fe₃C nanoparticles. The magnetic measurement shows that the composite nanoparticles exhibit a maximum magnetization of 60 emu g⁻¹ at room temperature. Biocompatibility study with three different cell lines (HeLa, MCF-7 and L929) confirms that these nanocomposites are biocompatible. Temperature versus time measurement in an AC field suggests good heating ability of the samples. These investigations indicate that these nanocomposites may be useful for bioapplications, in particular for hyperthermia.     

Preparation and Characterization of the Polyaniline Nanocomposites with Electricity/Magnetic Properties

Three kinds of magnetic particle (water-based NiZn ferrite fluid, water-based Fe₃O₄ magnetic fluid, and silicon-oil-based Fe₃O₄ magnetic fluid)/polyaniline nanocomposites were prepared in this study. The samples, after drying and grinding, were characterized by infrared spectrometry (IR), X-ray diffraction (XRD), and UV-vis, scanning electron microscope (SEM); their electromagnetic properties were also measured. The conductivitiy of the resulting water-based NiZn ferrite/polyaniline nanocomposites (WBNiZnFe/PA) was the greatest, reaching 0.094 s/cm, while the conductivitiy for water-based Fe₃O₄ magnetic particle/polyaniline nanocomposites (WBFe₃O₄/PA) was the lowest, reaching only 0.068 s/cm. The saturation magnetization for WBFe₃O₄/PA was the greatest, being 1.5 emu/g, while the saturation magnetization for WBNiZnFe/PA was the lowest, being only 0.8 emu/g. The coercivity of all magnetic particle/polyaniline nanocomposites was about He = 200 Oe.     

In situ growth of sol–gel-derived nano-VO2 film and its phase transition characteristics

Fe₃O₄/C nanocomposites have been prepared by one-pot PEG-assisted co-precipitation method. The structure and morphology of the as-prepared materials were analyzed by X-ray diffraction and transmission electron microscopy. The results showed that Fe₃O₄/C nanocomposites were well crystallized. Carbon nanoparticles dispersed among Fe₃O₄ particles forming a carbon layer, which prevent Fe₃O₄ particles from contacting each other. Electrochemical performance tests showed that Fe₃O₄/C nanocomposites keep at a high discharge capacity of 902.4 mAh g^?1 at 1 C after 110 cycles. Furthermore, the samples showed much improved rate capability and better cycle stability compared with pure Fe₃O₄. The excellent electrochemical performance of Fe₃O₄/C nanocomposites can be attributed to unique nanostructure and existence of amorphous carbon in the composites. The existence of the amorphous carbon not only enhanced electric conductivity, but also buffered volume variation of Fe₃O₄/C nanocomposites during charge/discharge process.     

Synthesis of Fe3O4/CNTs magnetic nanocomposites at the liquid-liquid interface using oleate as surfactant and reactant

Carbon nanotubes (CNTs)-based magnetic nanocomposites have attracted significant research interest owing to their great potentialities in various technological fields. In this investigation, a kind of novel Fe₃O₄/CNTs magnetic nanocomposites were prepared by in situ chemical precipitation using oleate as reactant and surfactant at the liquid-liquid interface of cyclohexane/ethanol/water mixture solvent. The as-prepared samples were characterized via transmission electron microscopy (TEM), X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) and vibration sample magnetometry (VSM). Results indicated that the Fe₃O₄/CNTs magnetic nanocomposites dispersed well in organic medium were prepared organic medium, were prepared. The magnetic nanocomposites were proved to be superparamagnetic with coercive force of 3.69 Oe. A mechanism scheme was proposed to illustrate the formation process of the magnetic nanocomposites.     

Synthesis and characterization of “mulberry”-like Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/multiwalled carbon nanotube nanocomposites

Nanocomposites composed of multi-wall carbon nanotubes (MWNTs) and Fe₃O₄ nanoparticles were fabricated using solvothermal method. Transmission and scanning electron microscopy, energy dispersive spectroscopy, and X-ray powder diffraction measurements confirmed that these mulberry-like Fe₃O₄ microparticles which were combined with the MWNTs in a random pattern are constructed with tiny nanocrystallites (12 nm in average diameter). The magnetic properties of the Fe₃O₄/MWNTs nanocomposites were measured using a vibrating sample magnetometer. Results showed that the Fe₃O₄/MWNTs nanocomposites exhibited superparamagnetism at room temperature and possessed a lower saturation magnetization (around 27.6 emu/g) than that of the pure Fe₃O₄ nanoparticles (around 33.7 emu/g). The Fe₃O₄/MWNTs nanocomposites have potential applications in engineering and medicine.     

Electrostatic self-assembly of Fe3O4 nanoparticles on carbon nanotubes

Carbon nanotubes (CNTs)-based magnetic nanocomposites can find numerous applications in nanotechnology, integrated functional system, and in medicine owing to their great potentialities. Herein, densely distributed magnetic Fe₃O₄ nanoparticles were successfully attached onto the convex surfaces of carbon nanotubes (CNTs) by an in situ polyol-medium solvothermal method via non-covalent functionalization of CNTs with cationic surfactant, cetyltrimethylammonium bromide (CTAB), and anionic polyelectrolyte, poly(sodium 4-styrenesulfonate) (PSS), through the polymer-wrapping technique, in which the negatively charged PSS-grafted CNTs can be used as primer for efficiently adsorption of positively metal ions on the basis of electrostatic attraction. X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) analysis have been used to study the formation of Fe₃O₄/CNTs. The Fe₃O₄/CNTs nanocomposites were proved to be superparamagnetic with saturation magnetization of 43.5 emu g^?1. A mechanism scheme was proposed to illustrate the formation process of the magnetic nanocomposites.     

Multifunctional core–shell nanoparticles: superparamagnetic,mesoporous, and thermosensitive

Multifunctional core–shell composite nanoparticles (NPs) have been developed by the combination of three functionalities into one entity, which is composed of a single Fe₃O₄ NP as the magnetic core, mesoporous silica (mSiO₂) with cavities as the sandwiched layer, and thermosensitive poly(N-isopropylacrylamide-co-acrylamide) (P(NIPAAm-co-AAm)) copolymer as the outer shell. The mSiO₂-coated Fe₃O₄ NPs (Fe₃O₄@mSiO₂) are monodisperse and the particle sizes were varied from 25 to 95 nm by precisely controlling the thickness of mSiO₂-coating layer. The P(NIPAAm-co-AAm) were then grown onto surface-initiator-modified Fe₃O₄@mSiO₂ NPs through free radical polymerization. These core–shell composite NPs (designated as Fe₃O₄@mSiO₂@P(NIPAAm-co-AAm)) were found to be superparamagnetic with high r ₂ relaxivity. To manipulate the phase transition behavior of these thermosensitive polymer-coated NPs for future in vivo applications, the characteristic lower critical solution temperature (LCST) was subtly tuned by adjusting the composition of the monomers to be around the human body temperature (i.e. 37 °C), from ca. 34 to ca. 42 °C. The thermal response of the core–shell composite NPs to the external magnetic field was also demonstrated. Owing to their multiple functionality characteristics, these porous superparamagnetic and thermosensitive NPs may prove valuable for simultaneous magnetic resonance imaging (MRI), temperature-controlled drug release, and temperature-programed magnetic targeting and separation applications.     

Field-induced microwave absorption in Fe3O4 nanoparticles and Fe3O4/polyaniline composites synthesized by different methods

Three kinds of nanoscale powders containing Fe₃O₄ nanoparticles (NPs) have been studied by ferromagnetic resonance (FMR): (i) Fe₃O₄ NPs grown and then covered with polyaniline (PANI), (ii) unclad Fe₃O₄ NPs, and (iii) Fe₃O₄ NPs grown “in situ” with the PANI. In every case, there is no low field microwave absorption, rather a single FMR line is observed. However, the half-power widths are of order of 1 kOe presumably due to a distribution of internal fields. For type I particles with a low concentration (below 40%) of Fe₃O₄, the observed resonance fields (H_r) are close to those expected for spheres with negligible magnetocrystalline anisotropy. For all other cases, H_r values are significantly lower. Such shortfalls can be roughly understood by invoking dipolar interactions between the grains, stresses frozen in grains during manufacture (method III), as well as anisotropy fields when the specimens are prepared in an aligning field.     

Synthesis and characterization of poly(N-methylpyrrole)/TiO2 composites on steel

Poly(N-methyl pyrrole) coating was successfully electrodeposited on steel substrates in mixed electrolytes of dodecyl benzene sulphonic acid (DBSA) with oxalic acid in the absence and the presence of TiO₂ nanoparticles (NPs). The morphology and compositions were characterized by Field Emission Scanning Electron Microscopy (FESEM), Fourier Transform Infrared Spectroscopy (FTIR), Energy-Dispersive X-ray spectroscopy (EDX). X-ray Diffraction (XRD) and Transmission Electron Microscopy (TEM) were used to calculate the size of nanoparticles. Electrode/polymer/electrolyte system was studied by Electrochemical Impedance Spectroscopy (EIS). The FESEM micrographs suggest that the incorporation of TiO₂ nanoparticles affects the morphology of the film significantly and makes the TiO₂ to be loosely piled up with PMPy. The results of EIS showed that synthesized PMPy in the presence of TiO₂ NPs increases and decreases the R_po and C_c of the coating respectively. The increase of the area of synthesized PMPy in the presence of nanoparticles can increase its ability to interact with the ions liberated during the corrosion reaction of steel in NaCl solution.     

Hybrid magnetic nanoparticles derived from wüstite disproportionation reactions at the nanoscale

We present Mössbauer studies of hybrid iron-oxide nanoparticles obtained by the disproportionation of oleic acid stabilized wüstite (Fe_xO) nanoparticles produced by selective oxidation of iron pentacarbonyl in high boiling temperature organic solvents. The results support X-ray diffraction and Transmission Electron Microscope studies of the presence of mixed Fe_xO and Fe₃O₄ phases within the nanoparticles whose relative content can be altered through heat treatment in nitrogen atmosphere. Furthermore, the Mössbauer study gives evidence of the presence of an amorphous, spin-glass like phase due to spin frustration at the Fe_xO/Fe₃O₄ interface.     

Enhanced magnetoresistance effects in bulk polycrystalline Ag-added magnetite

A series of bulk polycrystalline Ag-added Fe₃O₄ with a nominal composition, (Fe₃O₄)_1−xAg_x (x is molar fraction) with x=0, 0.1, 0.2, 0.3, 0.4, and 0.5 have been prepared by conventional solid-state reaction. X-ray diffraction patterns show that the pure Fe₃O₄ sample (x=0) has a single-phase inverse spinel structure, while the Ag-added samples are two-phase composites consisting of a ferrimagnetic Fe₃O₄ phase and a non-magnetic metal Ag phase. The bright-field transmission electron microscopy images exhibit that the samples are typical granular solids with a porosity of about 22%. The addition of Ag slightly increases the average grain size of the Fe₃O₄ phase and significantly enhances the MR effect of bulk polycrystalline Fe₃O₄ samples. Of all the samples the x=0.3 sample has a maximal MR of −5.1% at 300 K in a magnetic field of 1 T, and −6.8% in 5 T, which are approximately three times greater than the corresponding MR values (−1.8% at 1 T and −2.4% at 5 T) of the Fe₃O₄ sample. This enhancement of the MR can be attributed to the combination effect from the spin-dependent scattering at the interfaces between the Fe₃O₄ grains and the Ag granules and the spin-polarized tunneling at grain boundaries of Fe₃O₄ phase of the spin-polarized electrons.