共查询到20条相似文献,搜索用时 203 毫秒
1.
提出了一种利用非线性二次曝光技术制作三角形光纤Bragg光栅的新方法.该方法只使用普通Bragg位相模板,采用两次曝光技术,通过控制光纤光栅的本地谐振波长和反射率,达到控制光纤光栅谱形的目的.第一次直接对光纤曝光,用来控制光纤光栅谐振波长;第二次通过位相模板曝光,用来控制光纤光栅的反射率.考虑到光敏光纤感光特性曲线的多项e负指数变化规律,按照"分步写入光纤光栅设计软件"进行曝光分布设计,利用"分步曝光光纤光栅写入系统"进行曝光控制,使用信息产业部第46研究所生产的DCS-01型光敏光纤,得到了线性范围1.24 nm、反射率为0~64%的三角形光纤Bragg光栅.三角形光纤Bragg光栅作为光纤光栅传感解调器件,在光纤传感领域具有重要应用价值. 相似文献
2.
3.
非均匀光纤光栅响应特性的研究 总被引:12,自引:3,他引:9
光纤栅在未来光纤通信与光纤传感系统中将关键性作用。本文进行了不同线型光栅迹与喃啾 等波导结构参数下的非均匀光纤光栅响应特性的数值计算,并通过对光栅响应不对称性的研究讨论,提出了光栅响应对称性的两个一般条件。 相似文献
4.
Bragg光纤光栅与光纤传感技术 总被引:7,自引:0,他引:7
光纤光栅及其应用技术的出现和发展将成为光纤通信、光纤传感以及在各相关领域中具有变革意义的新一代高新技术。本文对光纤光栅的致光机理、各种典型成栅技术作了评述。阐述了光纤光栅传光原理,并对3S系统的概念、体系结构和技术上的问题以及研究现状和发展作了综述。 相似文献
5.
6.
基于混沌光纤激光的准分布式布拉格传感网络 总被引:1,自引:0,他引:1
提出了一种基于混沌光纤激光器的准分布式布拉格光纤光栅传感系统,将波长可调谐的混沌光纤激光器作为传感光源,全同弱反射布拉格光纤光栅作为传感元件。利用混沌光源具有delta函数的自相关特性,将混沌源的参考光信号与从全同弱反射布拉格光纤光栅反射的光信号经光电探测器进行光电转换,结合相关法对参考光和反射光进行相关运算,根据相关峰的位置对传感器位置进行精确定位。利用混沌激光的可调谐性实现因应力作用而发生变化的全同弱反射光纤光栅的中心波长的解调,从而实现准分布式的传感网络。实验结果表明利用混沌激光可在单路光纤上复用全同弱反射光纤光栅实现传感,并有望实现密集型全同弱反射光纤光栅传感网络。 相似文献
7.
8.
9.
10.
分析了高频CO2激光脉冲写入的周期达数毫米的超长周期光纤光栅(ULPFG)的模式耦合特性,并在此基础上,简单分析了这种折射率变化主要在光纤包层,且沿光纤横截面呈非对称分布的ULPFG所具有的温度、应变、扭曲及环境折射率响应特性,并在文末做了实验验证,实验结果表明该ULPFG不同谐振峰具有不同的特性响应灵敏度,这与理论分析符合得较好.这些独特的光学特性将使得这种光纤光栅在光纤通信和光纤传感中具有应用价值.
关键词:
光纤传感
光纤光栅
2激光')" href="#">CO2激光
超长周期光纤光栅 相似文献
11.
12.
13.
14.
提出了一种结构新颖的Sagnac干涉仪,分析计算了所含光纤光栅分别为均匀Bragg光栅和线 性啁啾光栅时的透射响应,得到了均匀光栅Sagnac环的解析解,发现含均匀光栅时可得到间隔均匀的通带结构,而含啁啾光纤光栅时只能得到间隔非均匀的通带结构.这两种结构都可 能有应用价值,前者可用在密集波分复用系统中,后者可用在光纤传感领域中.实验制作了 两种通带间隔不同的、通带数分别为8和16的多通带滤波器,实验证实了理论计算得到的结果.
关键词:
光纤光栅
Sagnac干涉仪
光学滤波器 相似文献
15.
文章对布拉格衍射效应在半导体光电子材料和光电子器件,特别是在光纤通信中的光电子器件的应用和发展进行了详细的介绍.文中以布拉格光栅衍射效应的光反馈和选模功能为主线,逐一介绍了X射线双晶布拉格衍射技术在半导体材料、特别是在量子阱和应变量子阱超薄层晶体生长和质量控制方面的作用,介绍了内建布拉格光栅对光通信用光信号源的发展所起的重要作用,波导光栅在复用和解复用过程中的作用,以及光纤布拉格光栅在全光纤通信系统中的应用及发展等. 相似文献
16.
Hirohisa Yokota Takahiro Hasegawa Yoshitaka Satoda Eiichi Sugai Yutaka Sasaki 《Optical Review》1999,6(3):173-179
Fused optical fiber grating couplers (FGCs), in which Bragg gratings are written in the coupling regions of fused optical fiber couplers with tapered shapes along them are theoretically and experimentally investigated. By coupled mode analysis considering these tapered shapes, the drop efficiencies of the FGCs, which are inherently zero for the normal fiber couplers without grating, are calculated. The grating offset, which is the difference between the centers of grating and the coupler taper, is found to be effective to increase the drop efficiency of the FGC. It is determined that the tapered shapes influence the wavelength dependence of the drop efficiency and tolerate the grating offset precision. Apodizations for the grating of FGC are found to be effective in suppressing side lobes of the drop efficiency. Measurement of the wavelength characteristics of drop efficiency and the temperature characteristics of drop wavelength of the fabricated fused FGC confirm that the lightwave with specific wavelength can be dropped by the FGC and that the temperature dependence of the drop wavelength is similar to that of Bragg wavelength changes of usual fiber Bragg gratings. 相似文献
17.
18.
19.
20.
Yanhua Luo Zengchang Li Ru Chen Qijin Zhang Gangding Peng Gang Zou Bing Zhu 《Optics Communications》2009,282(12):2348-2353
Based on the photoinduced birefringence in azo materials, the model of the birefringent long period fiber gratings (BLPFGs) has been proposed and the transmission of such birefringent fiber gratings was further simulated by the coupled mode theory. In order to obtain the optimum condition for making birefringent azopolymer optical fiber (APOF) gratings the photoinduced birefringence of azo dye and methyl methacrylate (MMA) copolymers was systematically studied. After photosensitivity study of azo samples, using Teflon technique, azo dye containing single mode polymer optical fiber (POF) was fabricated. Finally, BLPFGs can be fabricated in azopolymer fiber using polarized 532 nm laser. A 120 μm LPFG with a 50% duty cycle has been successfully written within the core of the fiber with 532 nm laser by an amplitude mask method. Under polarized microphotography, the grating was observed when the optical axis was set at 45° with the direction of the first polarizing lens of the polarization microscope. 相似文献