Ambient effect on optical absorption of Au nanoparticles dispersed within pores of mesoporous SiO2

A gold nanoparticles/monolithic mesoporous silica assembly was synthesized by ultrasonic irradiation of monolithic porous silica presoaked with precursor solution. Subsequent exposure to ambient air (ageing) and then drying at 120°C induce a new optical absorption peak around 470?nm (falling into the range from 460 to 475?nm) which is stable at room temperature, in addition to the normal surface plasmon resonance (SPR) of Au nanoparticles. Further drying results in the decline and disappearance of this peak, accompanied by increase of the normal SPR. If the sample, in which the new peak has disappeared due to long drying at 120°C, is exposed to the ambience once more, this peak will appear again after subsequent drying at 120°C, showing reversibility. Further experiments indicate that ambient ageing for a certain time plays a crucial role in the appearance of the new peak after subsequent drying at 120°C. Increased ageing time increases this peak. In addition, the ambient relative humidity and temperature during exposure are also important to the appearance of this peak. This peak may be associated with Au clusters with a size less than 1.5?nm. Based on the porous structure of the assembly and hydrophilicity of its pore wall, a nanodroplet formation and evaporation model is presented which can well explain all evolution behaviours of this peak. The model predicts the existence of the peak at 470?nm in the Au/silica assembly prepared by methods other than ultrasonic irradiation, which has also been confirmed by further experiments.     

室温下超声波辐照制备介孔结构的TiO2及其光催化性能

在室温条件下,利用超声波辐照方法合成了一系列具有大比表面积的介孔结构TiO₂光催化剂。应用N₂-物理吸附、X射线粉末衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)等手段对合成的样品进行了表征。考察了超声波强度、发射时间对TiO₂的结晶度、比表面积、孔体积、孔径等物理结构的影响,并提出了超声波辐照下TiO₂的介孔结构的形成机理。以λ=365 nm的紫外光为光源,评价了该系列催化剂光催化降解染料甲基橙的性能。结果表明超声波功率的增加将增加TiO₂的结晶度和孔径,并使其晶粒发生细化,提高催化剂的分散性。声化学合成的样品具有较高的光催化活性,其主要原因是超声波辐照方法合成的TiO₂具有较高的结晶度和较大的比表面积和孔体积。      

Optical property of nanocomposite of mesoporous silica thin films incorporated with gold nanoparticles

Amino-functionalized mesoporous silica thin films (MTFs) are produced using surface active agent F127,and then gold nanoparticles are introduced into the pore channels to prepare the Au/SiO 2 nanocomposite.After assembling the gold,the amino-functionalized MTF undergoes some shrinkage but remains a periodic structure as demonstrated by X-ray diffraction (XRD) patterns.The nanocomposite shows an acute characteristic diffraction peak assigned to (111) plane of the face-centered-cubic structure of gold,indicating that gold nanoparticles crystallize well and grow in a preferred orientation in the pore channels.The surface plasma resonance (SPR) absorption peak near 570 nm undergoes a red-shift accompanied by a strengthening of intensity when HAuCl 4 is used to react with the amino groups on the internal pore surfaces for 4,6,and 8 h.The simulative results are consistent with the experimental ones shows that the absorption property of the Au/SiO 2 nanocomposite is influenced by the dipping time,which affects the size and volume fraction of embedded gold nanoparticles.     

Surface-modified mesoporous silica with ferrocene derivatives and its ultrasound-triggered functionality

Novel ferrocene derivatives designed as gatekeepers were successfully composed on the pore outlet of amino-functionalized mesoporous silica by post-synthesis grafting where the peptide bond of the amine group (-NH₂) of mesoporous silica was linked with the carboxylic acid group (-COOH) of both ends of the ferrocene derivatives. The materials of the amine-functionalized mesoporous silica (NH₂-MS) and ferrocene-functionalized mesoporous silica (Fc-CONH-MS) were characterized using X-ray diffractions (XRD), Fourier-transform infrared (FT-IR), N₂ sorption isotherms, solid-state NMR spectra, scanning electron microscopy (SEM), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), and UV-vis absorption spectra. The ferrocene attached to the mesoporous silica pore outlet was cleavaged by ultrasound irradiation, which opened the closed-pore outlets, suggesting a possible application for controlled release drug carrier.     

Preparation and characterization of montmorillonite-silica nanocomposites: A sol-gel approach to modifying clay surfaces

Montmorillonite-silica nanocomposites were prepared by a sol-gel approach involving hydrolysis reaction of alkoxysilanes (TEOS) and subsequent condensation reaction with hydroxyl groups of the clay, resulting in the formation of the mesoporous silica network and silica nanoparticles covered or attached on the clay surfaces. According to X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and nitrogen adsorption isotherms, the structure and surface properties of the sol-gel-modified clay can be controlled by varying the TEOS/clay mass ratio and/or adding trace amounts of acid as catalyst. In the case of acid-catalyzed procedures, large continuous mesoporous silica was covered on the clay surfaces, resulting in delamination of clay platelets in silica matrix at higher TEOS/clay ratio, and attaching of isolated mesoporous silica on the clay surface at lower TEOS/clay ratio, respectively. In the case of non-catalyzed procedures, silica nanoparticles were attached on the two-dimensional (2D) clay platelets, while the stack order of the clay was maintained regardless of the TEOS/clay ratios. This sol-gel modification approach combines the surface properties of mesoporous silica and nanoparticles with layered clay, while inheriting the structural properties of the pristine clay such as further intercalation with organic compounds and polymers.     

Synthesis and thermal stability of gold nanowires within monolithic mesoporous silica

This paper describes the preparation, by a novel and simple method, and the thermal stability of gold nanowires within monolithic mesoporous silica, involving soaking monolithic mesoporous silica in HAuCl₄ aqueous solution, followed by drying and subsequent step-annealing. It has been shown that reduction of Au³⁺ within silica pores can occur during the drying process at 80 °C without any special reduction treatment. After initial annealing at 300 °C, Au nanowires are formed within the pores and are stable at temperatures up to 500 °C. Increasing the annealing temperature leads to a wire-to-rod-to-sphere morphological transformation of the Au nanowires. The surface-mediated reducing groups (-OH) on the silica pore are responsible for the low-temperature reduction of Au³⁺ ions, and the formation of Au nanowires is attributed to the uni-directional diffusion of Au atoms and the confinement of the pore channels. Spheroidization and breaking at some defects in the Au nanowires during annealing at elevated temperature result in the wire-to-rod-to-sphere transformation, accompanied by a blue-shift of the surface plasmon resonance over a very wide region in the optical spectrum. PACS 81.07.-b; 81.40.-z; 81.05.Rm     

Preparation and characterization of carbamoylphosphonate(CMPO) silane grafted on various mesoporous silicas

The carbamoylphosphosphonate silane (CMPO analogue; 2-(diphenylphosphoryl)-N-(3-(triethoxysilyl)propyl) acetamide) modified mesoporous silica was prepared via a post-synthesis grafting method for the effective purification of rare earth elements. The guest CMPO analogue was synthesized by direct coupling reaction of 2-(diphenylphosphoryl) acetic acid and 3-(triethoxysilyl)propan-1-amine. Various mesoporous silicates such as MCM-41, SBA-15, or amorphous silica nanoparticles were adopted as host materials. The resulting surface-modified mesoporous materials were characterized with respect to their structural integrity, surface area, and pore size and the concentration of the CMPO silane species. These CMPO functionalized periodic mesostructured silicates offer the potential of applications as catalysts, sensors, or environmental sorbents.     

Comparative studies of Zr-based MCM-41 and MCM-48 mesoporous molecular sieves: Synthesis and physicochemical properties

Two surfactant-templated synthetic routes are developed for the preparation of new types of mesoporous molecular sieves, Zr-MCM-41 and Zr-MCM-48, using different Si sources but keeping the same zirconium precursor (zirconium-n-propoxide). When fumed silica was used as Si precursor, a Zr-MCM-48 material of cubic structure was formed with a surface area of 654.8 m²/g and an unimodal pore diameter distribution. It shows low stability: after calcination at 600 °C, the ordered structure was transformed into a relatively disordered worm-like mesostructure with many defects and silanol groups. The use of tetraethyl orthosilicate as Si source led to the formation of a Zr-MCM-41 mesoporous solid, which had good thermal stability and a highly ordered hexagonal arrangement, with a surface area 677.9 m²/g and an uniform pore diameter distribution. Fourier transform infrared (FT-IR) characterization and ²⁹Si NMR analysis confirm that zirconium ions indeed incorporated into the framework of the solid. The in situ FT-IR spectroscopy of pyridine adsorption reveals that both, Lewis and Brönsted acid sites, were formed on the surface of these mesoporous materials. The strength and number of the Brönsted acid sites of the Zr-MCM-48 solid were greater than those of the Zr-MCM-41, due to a lower degree of condensation reaction during the synthesis that led to more structural defects in the framework and more silanol groups stretching from the solid surface.     

Probing the phase transition behavior of acetonitrile confined in mesoporous silica by FT Raman spectroscopy

Phase transitions of acetonitrile confined in mesoporous silica SBA‐15 and mesocellular silica foam (MCF) having different pore diameters of 39.0, 39.9, 28.4, 8.7, and 4.6 nm with corresponding pore openings of 20.9, 12.1, 10.0, 8.7, and 4.6 nm were investigated by FT Raman spectroscopy. Melting and freezing temperature depressions were found for acetonitrile confined in mesoporous silica with pore opening sizes of 20.9, 12.1, 10.0 and 8.7 nm. A thermal hysteresis between the cooling and heating cycles was also observed. It appears that the smaller the pore opening, the larger the depression of melting or freezing temperature. Although two solid ( and ) phases exist in bulk acetonitrile, only the liquid →β phase transition was detected for acetonitrile confined in the nanopores of mesoporous silica. The solid‐to‐solid phase transition was not observed. For the mesoporous silica with the smallest pore size of 4.6 nm, neither the liquid nor the transition was observed for the confined acetonitrile. The results demonstrate that FT Raman spectroscopy is a useful technique for studying the phase transition behavior of organic compounds confined in silica‐based hosts. Copyright © 2011 John Wiley & Sons, Ltd.     

纳米粒子修饰硅胶整体柱的制备及其在柱表面增强拉曼光谱应用研究

通过溶胶-凝胶法以四甲氧基硅烷(TMOS)和甲基三甲氧基硅烷(MTMS)作为混合的前体,聚乙二醇(PEG)为致孔剂,制备了具有贯通孔道结构的双孔硅胶整体柱,采用3-巯基丙基三甲氧基硅烷(MTPMS)对硅胶整体柱表面进行巯基化修饰后,分别将金、 银纳米粒子组装在整体柱材料表面。 利用透射电子显微镜(TEM)、 紫外-可见吸收光谱(UV-Vis)、 扫描电子显微镜(SEM)对金、 银纳米粒子形貌、 吸收光谱及组装金、 银纳米粒子前后整体柱的形貌进行了表征。 以对巯基苯胺(PATP)为探针分子,分别采用波长为633和532 nm的激发光作为激发光源,研究金和银纳米粒子修饰的硅胶整体柱的在柱表面增强拉曼光谱(SERS)性能。 结果表明,该基底呈现出很强的SERS活性,结合整体柱的分离富集优势将在食品/环境领域现场痕量检测方面具有广泛的应用前景。     

Effect of drying technique on the physicochemical properties of sodium silicate-based mesoporous precipitated silica

The conventional drying (oven drying) method used for the preparation of precipitated mesoporous silica with low surface area (>300 m²/g) and small pore volume is often associated with a high production cost and a time consuming process. Therefore, the main goal of this study was to develop a cost-effective and fast drying process for the production of precipitated mesoporous silica using inexpensive industrial grade sodium silicate and spray drying of the precipitated wet-gel silica slurry. The precipitated wet-gel silica slurry was prepared from an aqueous sodium silicate solution through the drop-wise addition of sulfuric acid. Mesoporous precipitated silica powder was prepared by drying the wet-gel slurry with different drying techniques. The effects of the oven drying (OD), microwave drying (MD), and spray drying (SD) techniques on the physical (oil, water absorption, and tapping density), and textural properties (specific BET surface area, pore volume, pore size, and % porosity) of the precipitated mesoporous silica powder were studied. The dried precipitated mesoporous silica powders were characterized with field-emission scanning electron microscopy; Brunauer, Emmett and Teller and BJH nitrogen gas adsorption/desorption methods; Fourier-transform infrared spectroscopy; thermogravimetric and differential analysis; N₂ physisorption isotherm; pore size distribution and particle size analysis. There was a significant effect of drying technique on the textural properties, such as specific surface area, pore size distribution and cumulative pore volume of the mesoporous silica powder. Additionally, the effect of the microwave-drying period on the physicochemical properties of the precipitated mesoporous silica powder was investigated and discussed.     

Facile Fabrication of Dendritic Mesoporous SiO2@CdTe@SiO2 Fluorescent Nanoparticles for Bioimaging

A seeded watermelon‐like mesoporous nanostructure (mSiO₂@CdTe@SiO₂, mSQS) composed of a novel dendritic mesoporous silica core, fluorescent CdTe quantum dots (QDs), and a protective solid silica shell is successfully fabricated by loading QDs into dendritic mesoporous silica nanoparticles through electrostatic interaction, and then coating with a solid silica shell by the modified Stöber method. The shell thickness of mSQS can be tuned from 0 to 32 nm as desired by controlling the reaction parameters, including the amount of silica precursor, tetraethyl orthosilicate, that is introduced, the solvent ratio (H₂O:ethanol), and the amount of catalyst (NH₃?H₂O). These fluorescent mSiO₂@QDs@SiO₂ nanoparticles possess excellent stability and thickness‐dependent cytotoxicity, and are successfully applied to bioimaging.     

Tuning the morphology of mesoporous silica by using various template combinations

By using different dual-template combinations, four types of mesoporous silica materials with different morphologies were successfully synthesized. A solid-sphere mesoporous (SSM) silica was obtained using a combination of tri-block copolymer (F127) and 1,12-diaminododecane (DADD), but when F127 was substituted with poly(vinylpyrrolidone) (PVP), a leaf-shaped mesoporous (LSM) silica was obtained. In addition, a hollow-sphere mesoporous (HSM) silica was obtained by using a combination of PVP and dodecylamine (DDA), but a cotton-like mesoporous (CLM) silica was obtained using F127 instead of PVP. All four types of synthesized materials were characterized by SEM, TEM, XRD, and N₂ adsorption–desorption isotherms, and the results showed that all of them exhibited high surface area, large pore volume, worm-like pore structure, and beautiful shapes. The results of storage experiments revealed that the HSM and CLM showed good adsorption and storage properties. The HSM (the largest pore volume) seemed to have the larger storage capacity when compared to the CLM, albeit CLM had the highest surface area among all.     

ZnO nanoparticles embedded in UVM-7-like mesoporous silica materials: Synthesis and characterization

ZnO nanodomains embedded in bimodal mesoporous silica (UVM-7) materials with high Zn content (4≤Si/Zn≤30) have been synthesized by an one-pot surfactant-assisted procedure from a hydro alcoholic medium using a cationic surfactant (CTMABr=cetyltrimethylammonium bromide) as structural directing agent, and starting from molecular atrane complexes of Zn and Si as hydrolytic inorganic precursors. This chemical procedure allows optimizing the dispersion of the ZnO particles in the silica walls. The bimodal mesoporous nature of the final high surface area nano-sized materials is confirmed by XRD, TEM, and N₂ adsorption–desorption isotherms. The small intra-particle mesopore system is due to the supramolecular templating effect of the surfactant, while the large pores have their origin in the packing voids generated by aggregation of the primary nanometric mesoporous particles. A limited pore blocking and a high accessibility to the ZnO active nanoparticles have been achieved. The effects induced by the progressive incorporation of ZnO nanoparticles into the mesostructure have been examined, including a careful optical spectroscopic study (PL and UV–visible).     

Gold decorated NaYF<Subscript>4</Subscript>:Yb,Er/NaYF<Subscript>4</Subscript>/silica (core/shell/shell) upconversion nanoparticles for photothermal destruction of BE(2)-C neuroblastoma cells

Gold decorated NaYF₄:Yb,Er/NaYF₄/silica (core/shell/shell) upconversion (UC) nanoparticles (~70–80 nm) were synthesized using tetraethyl orthosilicate and chloroauric acid in a one-step reverse microemulsion method. Gold nanoparticles (~6 nm) were deposited on the surface of silica shell of these core/shell/shell nanoparticles. The total upconversion emission intensity (green, red, and blue) of the core/shell/shell nanoparticles decreased by ~31% after Au was deposited on the surface of silica shell. The upconverted green light was coupled with the surface plasmon of Au leading to rapid heat conversion. These UC/silica/Au nanoparticles were very efficient to destroy BE(2)-C cancer cells and showed strong potential in photothermal therapy.     

Preparation of nano-sized platinum metal catalyst using photo-assisted deposition method on mesoporous silica including single-site photocatalyst

Pt particles in a uniform dispersion were successfully synthesized on single-site photocatalyst (Ti-containing mesoporous silica (Ti-HMS)) under UV-light irradiation by a photo-assisted deposition (PAD) method. Using an aqueous solution of H₂PtCl₆ as a precursor, the nano-sized Pt metal particles were deposited directly on the photo-excited tetrahedrally coordinated titanium oxide moieties within the framework of mesoporous silica (PAD-Pt/Ti-HMS). The Pt catalysts were characterized by means of XRD, Pt L_III-edge XAFS, CO adsorption, and TEM analysis. It was demonstrated that Pt particles had mean diameter of 4 nm in a narrow size distribution. Meanwhile, Pt particles loaded by a conventional impregnation method (imp-Pt/Ti-HMS) showed a wide size distribution ranging from 2 to 30 nm. The PAD-Pt/Ti-HMS catalyst was more active in the CO oxidation than the conventional impregnated imp-Pt/Ti-HMS catalyst. It is suggested that the PAD method using single-site photocatalyst is a useful and unique technique to prepare fine and uniform Pt nanoparticles.     

Molecular ordering of mixed surfactants in mesoporous silicas: a solid-state NMR study

The use of mixed surfactants in the synthesis of mesoporous silica nanoparticles (MSNs) is of importance in the context of adjusting pore structures, sizes and morphologies. In the present study, the arrangement of molecules in micelles produced from a mixture of two surfactants, cetyltrimethylammonium bromide (CTAB) and cetylpyridinium bromide (CPB) was detailed by solid-state NMR spectroscopy. Proximities of methyl protons in the trimethylammonium headgroup of CTAB and protons in the pyridinium headgroup of CPB were observed under fast magic angle spinning (MAS) by (1)H-(1)H double quantum (DQ) MAS NMR and NOESY. This result suggested that CTAB and CPB co-exist in the pores without forming significant monocomponent domain structures. (1)H-(29)Si heteronuclear correlation (HETCOR) NMR showed that protons in the headgroups of CTAB are in closer proximity to the silica surface than those in the CPB headgroups. The structural information obtained in this investigation leads to better understanding of the mechanisms of self-assembly and their role in determining the structure and morphology of mesoporous materials.     

Recent progress in solid-state NMR studies of drugs confined within drug delivery systems

Recent progress in the application of solid-state NMR (SS NMR) spectroscopy in structural studies of active pharmaceutical ingredients (APIs) embedded in different drug carriers is detailed. This article is divided into sections. The first part reports short characterization of the nanoparticles and microparticles that can be used as drug delivery systems (DDSs). The second part shows the applicability of SS NMR to study non-steroidal anti-inflammatory drugs (NSAIDs). In this section, problems related to API–DDS interactions, morphology, local molecular dynamics, nature of inter- or intramolecular connections, and pore filling are reviewed for different drug carriers (e.g. mesoporous silica nanoparticles (MSNs), cyclodextrins, polymeric matrices and others). The third and fourth sections detail the recent applications of SS NMR for searching for antibiotics and anticancer drugs confined in zeolites, MSNs, amorphous calcium phosphate and other carriers.     

Use of silica gels and mesoporous molecular sieves as supports for the solid-phase Claisen rearrangement

A series of silica gels and mesoporous molecular sieves differing in both the range of particle size and mean pore size were derivatized with the p-[(R,S)-α-[1-(9H-fluoren-9-yl)-methoxyformamido]-2,4-dimethoxybenzyl]-p henoxyacetic acid linker and their loading capacities were measured. Loading capacities ranging between 0.4–0.6 mmol Fmoc/g were achieved. Several of these silica based materials were derivatized with the hydroxymethyl benzoic acid linker and used as supports for the solid phase Claisen rearrangement of a support bound phenyl allyl ether. Both the silica gel and mesoporous supports were heated at 225 °C for 3 h to effect the Claisen rearrangement. The results showed that, compared to the same reaction run homogeneously, the silica gel support achieved similar total product yields and ratios for two Claisen products. The mesoporous supports were found to selectively produce one of the Claisen products over the other. Analysis shows that the molecules bound to the mesoporous support are physically further separated from each other as compared to those bound to the silica gel support. A mechanism is presented which accounts for the selectivity of the mesoporous support in forming one Claisen product over the other. The Claisen product was further derivatized to the resulting phenyl ethyl ether through a solid phase Mitsunobu reaction on the mesoporous support. This revised version was published online in August 2006 with corrections to the Cover Date.     

An Assessment of the Use of Mesoporous Silica Materials to Improve Pulsed Dipolar Spectroscopy

Protein immobilization in mesoporous silica nanoparticles has attracted much attention due to its wide range of applications. However, it remains largely unexplored how the use of mesopores can alter the spatial distribution of encapsulated biomolecules so as to improve pulsed dipolar spectroscopy sensitivity. Here, we performed electron spin resonance measurements for three different spin-labeled biomolecules (including two different peptides and a protein) encapsulated in various types of mesoporous materials differing in textural properties such as nanochannel length (e.g., 0.2–4 μm) and average pore diameter (e.g., 6–11 nm, approximately). Our results show that biomolecules are clustered somewhat upon the encapsulation into mesopores, and that due to the clustering, instantaneous diffusion plays an important role in the spin relaxation in nanochannels. The extent of molecular clustering exhibits a clear positive correlation with the length of nanochannels, whereas it shows little correlation with pore diameters. Among the materials studied, mesoporous materials with the shortest length of nanochannels are most effective to reduce spin clustering, thus suppressing the unwanted instantaneous diffusion and enhancing spin–spin relaxation time. This study has opened a possibility of improving the quality of pulsed dipolar spectroscopy with mesoporous silica nanoparticles.