Synthesis and studies of trisubstituted biphthalonitrile/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> magnetic hybrid microspheres

New trisubstituted biphthalonitrile/magnetite (TSB/Fe₃O₄) magnetic hybrid microspheres were synthesized from TSB and FeCl₃ · 6H₂O using the method of one-stage thermal temperature crystallization of solvents. The morphology and structure of magnetic hybrid microspheres were inspected using a scanning electron microscope, IR Fourier spectroscopy, and X-ray diffraction. It was found that the grown TSB/Fe₃O₄ magnetic hybrid microspheres represent spherical particles with an average size of ~137 nm and a small size spread. The size and size distribution of magnetic hybrid microspheres can be controlled by a small change in the ratio of TSB and Fe³⁺ ion contents in the microsphere. TSB/Fe₃O₄ hybrid microspheres exhibit a rather high saturation magnetization (58.16 emu g^–1) and new microwave electromagnetic properties, i.e., lower (in comparison with published) dielectric losses at low frequencies; magnetic losses are increased obviously due to an increase in the TSB content. Furthermore, it is detected that magnetic hybrid microspheres absorb microwaves, and strong reflection losses in a wide frequency range are established. The effective reflection loss of–31 dB is obtained in the microwave range from 2 to 16 GHz due to TSB content variations. Wide absorption properties of microwaves along with regular spherical shape and excellent magnetic properties offer wide opportunities for various applications of TSB/Fe₃O₄ magnetic hybrid microspheres as functional materials.     

Preparation of magnetic composite microspheres by surfactant free controlled radical polymerization: Preparation and characteristics

Submicron magnetic composite microspheres have been prepared by a new surfactant free controlled radical polymerization. This new approach is based on the use of diphenylethene (DPE) as radical controlling agent and no emulsifier is required. X-ray powder diffraction (XRD), thermogravimetric analysis (TGA) and transmission electron microscopy (TEM), etc. were conducted to characterize the magnetite particles and magnetic composite microspheres. The average size of the magnetic composite microspheres prepared by this new approach is 265 nm and the magnetite content of the composite microspheres is around 20%. Furthermore, the magnetic composite microspheres which surfaces have epoxy groups were also prepared.     

Preparation of magnetic polylactic acid microspheres and investigation of its releasing property for loading curcumin

In order to obtain a targeting drug carrier system, magnetic polylactic acid (PLA) microspheres loading curcumin were synthesized by the classical oil-in-water emulsion solvent-evaporation method. In the Fourier transform infrared spectra of microspheres, the present functional groups of PLA were all kept invariably. The morphology and size distribution of magnetic microspheres were observed with scanning electron microscopy and dynamic light scattering, respectively. The results showed that the microspheres were regularly spherical and the surface was smooth with a diameter of 0.55-0.75 μm. Magnetic Fe₃O₄ was loaded in PLA microspheres and the content of magnetic particles was 12 wt% through thermogravimetric analysis. The magnetic property of prepared microspheres was measured by vibrating sample magnetometer. The results showed that the magnetic microspheres exhibited typical superparamagnetic behavior and the saturated magnetization was 14.38 emu/g. Through analysis of differential scanning calorimetry, the curcumin was in an amorphous state in the magnetic microspheres. The drug loading, encapsulation efficiency and releasing properties of curcumin in vitro were also investigated by ultraviolet-visible spectrum analysis. The results showed that the drug loading and encapsulation efficiency were 8.0% and 24.2%, respectively. And curcumin was obviously slowly released because the cumulative release percentage of magnetic microspheres in the phosphate buffer (pH=7.4) solution was only 49.01% in 72 h, and the basic release of curcumin finished in 120 h.     

Preparation of magnetite–dextran microspheres by ultrasonication

An improved method of preparing magnetite–dextran microspheres by ultrasonication is proposed. Several parameters were evaluated and the characteristics of the microspheres investigated by scanning electron microscope (SEM), atomic force microscope (AFM), particle size analyzer and magnetometer. The results show that the initial Fe/dextran ratio is the most effective parameter for both the size and the magnetic properties.     

One-pot solvothermal route to self-assembly of cauliflower-shaped CdS microspheres

Nearly monodispersed cauliflower-shaped CdS microspheres were prepared through a simple one-step solvothermal route on a large scale by employing sodium dodecyl sulfate (SDS) as the surfactant. Images by field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM) indicate that cauliflower-shaped CdS microspheres with diameters in the range from 1.3 to 4.5 μm are assembled by nanoparticles with an average diameter of approximately 30 nm. The possible formation mechanism of the cauliflower-shaped CdS microspheres was also proposed. The photovoltaic activity of cauliflower-shaped CdS architectures has been investigated, indicating that the as-obtained CdS microspheres exhibited higher photovoltaic performance in comparison with CdS nanoparticles.     

Low-frequency complex magnetic susceptibility of magnetic composite microspheres in colloidal dispersion

A procedure is presented to determine the permanent magnetic dipole moment of composite microspheres containing magnetic nanoparticles with a blocked magnetic dipole moment. The composite particles are dispersed in a solvent, and the complex magnetic susceptibility is measured from 0.1 to 1000 Hz using a highly sensitive new setup. Composite particles with a permanent magnetic dipole moment are revealed by a characteristic frequency that corresponds to the Brownian rotation of the microspheres. From measured susceptibility spectra, we calculate the permanent magnetic dipole moment of recently developed cobalt ferrite-doped silica and latex microspheres.     

Preparation of poly(styrene-glucidylmethacrylate)/Fe3O4 composite microspheres with high magnetite contents

Magnetic polymer composite microspheres with high magnetite contents were prepared by dispersion polymerization of styrene (St) and glucidylmethacrylate (GMA), in which Fe₃O₄ nanoparticles were co-stabilized by oleic acid and silane surfactants. The microstructure of the composite microspheres was characterized by Fourier transform infrared (FTIR) spectrometry, X-ray diffraction (XRD) and transmission electron microscopy (TEM). Results demonstrated the presence of a hybrid morphology with organic polymer-encapsulated inorganic particles. Subsequently, thermogravimetric analysis (TGA) and vibrating sample magnetometry (VSM) were used to evaluate the magnetite content of the microspheres. It was found that an accordant magnetite content of about 70 wt%, could be obtained for the magnetic polymer microspheres, a value significantly higher than those reported thus far. The possible mechanism for the formation of the microspheres was proposed.     

缩合法合成磁性荧光高分子CdTe@Fe_3O_4/P(NIPAM-co-AA)复合微球及其表征

具有超顺磁性和荧光特性的CdTe@Fe_3O_4/P(NIPAM-co-AA)多功能复合微球是以P(NIPAMco-AA)为模板制备而成.首先,采用溶胀法使模板微球带有磁性;其次,辅助TEOS和APTES两种化学试剂实现对Fe_3O_4/P(NIPAM-co-AA)微球表面的氨基功能化;最后,携带氨基的磁性微球与巯基乙酸修饰的CdTe量子点通过酰胺缩合反应,将量子点键合到磁性微球表面上,最终获得单分散的磁性荧光高分子复合微球.分别采用扫描电子显微镜、透射电子显微镜、倒置荧光显微成像系统、荧光分光光度计以及振动样品磁强计等方法对所获复合材料的结构与性能进行了表征.结果表明:复合微球单分散性良好,平均粒径约为30μm,饱和磁化强度可达5.4emu/g,具有良好的超顺磁性和较高的荧光发光效率.该材料将磁性、荧光结合到微米级高分子共聚物上,不仅解决了纳米粒子分离和处理的困难,而且奠定了多功能材料在生物标记、荧光成像等诸多领域潜在的应用基础.     

Upon a magnetic composite preparation based on magnetite and poly(succinimide)-b-poly(ethylene glycol) shell

Taking into account that magnetic particles with suitable surface characteristics have a high potential for the use in a lot of in vitro and in vivo applications, in the study is presented the in situ preparation of a core-shell magnetic composite based on the magnetite core and the shell composed from the poly(succinimide)-b-poly(ethylene glycol) copolymer. The average particle size of the synthesized magnetic microspheres is in the range of 6.5-8.8 μm with a magnetite content of around 11%. The saturation magnetization of the microspheres was found 26.8 emu/g, the magnetic microspheres being characterized by superparamagnetic properties. The particles have combined properties of high magnetic saturation and biocompatibility and interactive functions at the surface through the block copolymer shell. The surface of the magnetic particles has also the possibility for further functionalization or the attachment of various bioactive molecules after the hydrolysis of the succinimide cycle and the resulting carboxylic group.     

The impact of carbon shell on a Sn–C composite anode for lithium-ion batteries

Spherical Sn–carbon core-shell powders (CSCM/Sn) were synthesized through a resorcinol–formaldehyde microemulsion polymerization performed in the presence of SnO₂ powders, followed by carbonization in an inert atmosphere. Scanning electron microscope and X-ray diffractometry analyses showed that the Sn powders were thoroughly encapsulated within the carbon microspheres. The CSCM/Sn presented much better cyclability than the conventional Sn–carbon microsphere composite. In core-shell-structured composite, most of the Sn particles were encased inside carbon microspheres and not easy to aggregate or fall off from the microspheres. The carbon shell suppressed the aggregation of tin particles and alleviated the volume change of tin, and the conductive carbon shell effectively decreased the polarization during cycling, giving rise to better high rate performance and excellent capacity retention ability. It is shown that surface structure plays an important role in alloy/C composite anode materials for lithium-ion battery.