浅海海底反射系数幅值参数的反演

理论分析了一种通过混响强度衰减特性获取海底反射系数的幅值参数的方法.将海底反射系数的幅值参数和相位参数引入到全波动混响模型中,为海底反射系数的反演提供理论基础。理论分析和数值仿真表明,在小掠射角条件下,利用混响强度衰减特性反演海底反射系数幅值参数的可行性和准确性。该反演方法只需要输入4个变量:本地混响强度的衰减特性,反射系数的相位参数,海深以及海深处的声速,同时要求混响数据具有一定的混响噪声比(大于6 dB)才能够使反演结果准确可信。根据本地静态混响实验数据成功反演得到海底反射系数的幅值参数.      

相干噪声快速去除算法及其在声源定位中的应用

针对相干噪声干扰声源辨识问题,将强跟踪滤波器理论与阵列-信号采集模型相结合,发展了一种快速估计相位变化的算法。算法引入多重次优渐消因子,能够进一步提取相位残差中的有用信息,使输出残差序列处处正交,且该因子能根据噪声相位差变化自动调节。通过仿真对连续相位突变进行跟踪表明,在参数失配条件下该算法实现了相位差的准确估计,且其性能在宽频范围具有稳定性。通过音箱实验给出了宽频范围内的成像结果,与已有算法对比表明,该算法不仅能够实时消除噪声干扰并可将收敛速度提高一倍以上。本研究实现了对随机变化相位的准确估计,提升了传声器阵列在相干噪声干扰下的声源实时定位能力。      

利用共振无源腔分析和抑制飞秒脉冲激光噪声的理论和实验研究

理论分析了共振无源腔对飞秒脉冲激光的强度和相位噪声的转化模型,分析表明,通过测量无源腔透射场或者反射场相对于输入场强度噪声的变化,可以间接得到输入场飞秒脉冲激光的相位噪声.在此基础上设计了精细度约为1500、自由光谱区为75 MHz的八镜环形共振无源腔,并测量了钛宝石锁模激光经过该共振无源腔后透射场和反射场强度噪声的变化.实验观察到,飞秒脉冲激光经过无源腔透射后,强度噪声特性得到较好改善,在探测频率2 MHz附近达到散粒噪声极限.同时,结合共振无源腔对激光强度和相位噪声的转化模型,间接给出了钛宝石锁模激光的相位噪声及无源腔对相位噪声的有效抑制作用.     

由脉冲波形与传播损失反演海底声速与衰减系数

根据黄海中部一次浅海声学实验获得的脉冲波形和传播损失数据进行海底声速和衰减系数的反演。本文在反演过程中：（1）考虑了海水深度的测量误差对反演结果的影响,并提出了一种消除该影响的方法。（2）反演得到的该海区海底衰减与频率呈非线性关系。（3）本文讨论了非均匀海底模型对海底反演结果的影响。     

多普勒差分干涉仪干涉图信噪比对相位不确定度研究

多普勒差分干涉仪通过测量干涉图相位变化反演大气风速.干涉图信噪比是工程应用中影响测风干涉仪相位反演精度的核心指标之一,基于观测数据分析多普勒差分干涉仪中相位不确定度与干涉图信噪比之间的定量关系建立解析模型,对仪器设计、性能评价及风场数据应用具有重要意义.本文基于傅里叶变换光谱学噪声传递理论和多普勒差分干涉仪相位反演模型,建立干涉图信噪比与相位不确定度传递的理论模型.利用多组不同信噪比仿真及实验实测数据,将相位反演模型计算的统计结果与本文提出的理论模型分析结果进行比较验证,结果表明,多组实验数据平均残差小于0.07 mrad,两者的一致性较好,建立的模型为多普勒差分干涉仪效能评估、干涉仪设计优化提供理论依据.     

南海北部负跃层环境下海底参数声学反演

利用2015年南海北部声学实验的实验数据,对海底声学参数进行反演。在综合分析声速起伏及海底模型对海底反演影响的基础上,通过选择等效的海水声速剖面和海底模型,改进了多参量联合地声反演方法,使得其不仅能解决反演中的多值性问题,还能适用于负跃层起伏环境下的声学反演。即当用匹配场反演海底声速和用传播损失反演海底衰减时,如果温跃层内有内波等随机起伏,可使用传播路径上平均声速剖面和单层等效海底进行声场计算。反演得到的海底声速和密度结果与海底采样测量符合较好,拟合给出了海底衰减系数随频率的非线性经验关系式。反演结果可为南海北部声传播规律研究与应用提供海底参数。      

浅海混响的垂直相关和海底反射损失与散射强度的反演

根据浅海混响射线简正波理论和可分离的海底散射模型,导出了混响垂直相关的表达式,理论研究和实验结果表明垂直相关与接收深度有关,与声源深度无关。提出一种利用混响强度衰减曲线与混响垂直相关曲线联合反演海底反射损失和海底散射强度的方法。数值模拟反演及对实验数据的反演表明:所提出的反演方法具有实验简便、反演速度比较快及反演的结果比较稳定等特点。     

基于旋转照明光的数字全息相干噪声抑制

提出一种数字全息相干噪声抑制方法。首先在照明光方位角给定的前提下,通过在极向平面内连续旋转照明光,实现在多角度照明条件下记录离轴数字全息图。然后对所获得的全息图分别重构,同时利用倾斜相差补偿算法和数字图像自相关配准方法分别补偿再现像的相位倾斜及横向偏移。最后将重构像进行非相干叠加,从而有效抑制再现像的相干噪声。实验结果及相关统计评价数据皆验证了该方法的有效性。     

利用局域滤波方法反演地声参数

地声参数的声学反演方法一直是水声学研究领域的热点。针对现有地声参数反演方法在分批分时处理海量数据时不能同时兼顾反演速度和精度、难以满足实际需要的不足,本文基于一个新构造的阵列观测数据向量,提出了一种反演地声参数的局域滤波新方法。该方法首先由前向声传播模型产生一个拷贝场样本集,然后采用加权最小二乘滤波器在阵列实测数据的局域空间内近似地估计了地声参数反演算子(即从数据空间到参数空间之间的映射关系)。本文方法能够充分地利用声场观测信息、避免了整体平滑效应、且海量数据处理时仅需要较少的前向模型计算,具有反演速度快、精度高、兼顾二者的优点,特别适用于对海量数据的分批分时处理及要求实时反演的应用场合。最后,典型浅海环境下的数值仿真和某次地中海实验数据分析结果验证了本文方法的有效性。     

半混响环境中水下结构辐射声功率测量

本文参照空气声学的方法,在水池的半混响环境中,测量了两个相似加肋圆柱壳模型的水下辐射声功率,并利用声辐射的理论相似关系进行校验,在高频段测量偏差为1-2dB。     

Effects of incoherent and coherent source spectral information in geoacoustic inversion

This paper examines the effect on matched-field geoacoustic inversion of including source spectral information, as can be available in controlled-source acoustic surveys. Source information can consist of relative or absolute knowledge of the source amplitude and/or phase spectra, and can allow frequency-coherent processing of spatial acoustic-field data. A number of multi-frequency acoustic processors, appropriate for specific types of source information, are defined based on the likelihood function for complex acoustic-field data with Gaussian noise. The information content of the various processors is quantified in terms of marginal probability distributions and highest-probability density intervals for the unknown geoacoustic and geometric parameters, which define the accuracy expected in inversion. Marginal distributions are estimated using a fast Gibbs sampler approach to Bayesian inversion, which provides an efficient, unbiased sampling of the multi-dimensional posterior probability density. The analysis is illustrated for incoherent and coherent processors corresponding to several types of source knowledge ranging from complete information to no information, and the results are considered as a function of the spatial and frequency sampling of the acoustic fields.     

浅海波导环境失配下的协方差矩阵拟合稳健匹配场声源功率估计

实际浅海波导中环境噪声为相干噪声,最小方差匹配场声源功率估计方法能在相干噪声背景下准确估计声源辐射功率,但该方法受环境不确定性影响较大;此外,由于最小方差匹配场声源功率估计方法使用信号幅度作为中间量估计声源功率,信号幅度估计误差会二次放大并传递到声源功率估计结果中。本文提出一种协方差矩阵拟合稳健最小方差匹配场声源功率估计方法,该方法引入信道传递函数不确定集,结合协方差矩阵拟合思想将声源功率估计问题建模为在信道传递函数不确定集约束下对函数取极值的问题,使用Lagrange乘子法求解该问题得到信道传递函数估计值和声源辐射功率估计值。环境失配影响声源辐射功率估计性能的根本原因在于信道传递函数偏差较大,协方差矩阵拟合稳健匹配场声源功率估计方法有效减小了环境失配时信道传递函数的偏差,从而显著提升环境失配稳健性。此外,该方法使用权值直接估计声源功率,无需使用信号幅度作为中间量,避免了估计误差的传递。仿真验证了协方差矩阵拟合稳健匹配场声源功率估计方法的环境失配稳健性。     

An inversion modelling method to obtain the acoustic power of the noise sources in a large factory

A common problem for large factories that wish to decrease their environmental acoustic impact on neighbouring locations is to find out the acoustic power of every noise source. As these factories cannot stop their activity in order to measure each source individually, a procedure is needed to obtain the acoustic powers with the factory under normal operating conditions. Their contribution to the overall sound pressure level at each neighbouring location can then be found and it is possible to calculate the improvements obtained after any modification of the sources. In this paper an inversion modelling method is used to do so. Acoustic powers are obtained by means of field sound pressure level measurements and with the use of a sound propagation software. A careful analysis of the solution has been carried out by simulating errors on the measured data in order to detect possible correlations between the acoustic power of different sources and avoid misleading interpretations of the results. The whole methodology has been applied to a liquid-gas production factory.     

Prediction of Outdoor Noise Propagation Induced By Single-Phase Power Transformers

Outdoor power transformers are one of the most pervasive noise sources in power transmission and distribution systems. Accurate prediction of outdoor noise propagation plays a dominant role for the evaluation and control of noise relevant to the transformer stations. In this paper surface vibration tests are carried out on a scale model of a single-phase transformer tank wall at different excitation frequencies. The phase and amplitude of test data are found to be randomly distributed when the excitation frequency exceeds the seventh mode frequency, which allows the single-phase power transformer to be simplified as incoherent point sources. An outdoor-coherent model is subsequently developed and incorporated with the image source method to investigate noise propagation from single-phase power transformers, due to the occurrence of multiple reflections and diffractions in the propagation path of each point source. The proposed model is used to calculate the sound field of the power transformer group by exploiting the additional phase information. In comparison with the ISO9613 model and the boundary element method, it is found that the proposed coherent image source method leads to more accurate prediction results, and hence better performance for the prediction of the outdoor noise induced by single-phase power transformers.     

Hybrid geoacoustic inversion of broadband Mediterranean Sea data

This paper describes an acoustic experiment (PROSIM'97) carried out to investigate inversion for seabed properties at a site off the west coast of Italy where previous acoustic and geophysical studies have been performed. Acoustic fields were measured at a vertical hydrophone array due to a swept-frequency source towed over weakly range-dependent bathymetry. Based on the known geology, the seabed is modeled as a sediment layer overlying a semi-infinite basement with unknown model parameters consisting of the sediment thickness, sediment and basement sound speeds, source range and depth, water depth at the source and array, and array tilt. A hybrid inversion algorithm is applied to determine the model values that minimize the mismatch with the measured acoustic fields. Multiple data sets are analyzed to examine the consistency of the inversion results. It is found that the low sound speed of the sediment layer, together with a large uncertainty in bathymetry, leads to strong correlations between the water depths and sediment thickness. This precludes reliable estimation of these parameters individually; however, the total depth to the basement can be estimated reliably. In addition, the basement speed and geometric parameters are estimated consistently, and all parameters compare favorably with the geophysical ground-truth information and with previous inversion results.     

An evaluation of the accuracy of shallow water matched field inversion results

In this article the accuracy of geo-acoustic and geometric parameter estimates obtained through matched field inversion (MFI) was assessed. Multi-frequency MFI was applied to multi-tone data (200-600 Hz) received at a 2-km source/receiver range. The acoustic source was fixed and the signals were received at a vertical array. Simultaneously with the acoustic transmissions, a CTD (conductivity, temperature and depth)-chain was towed along the acoustic track. A genetic algorithm was used for the global optimization, whereas a normal mode model was applied for the forward acoustic calculations. Acoustic data received at consecutive times were inverted and the stability of the inverted parameters was determined. Also, the parameter estimates were compared with independent measurements, such as multi-channel seismic surveys (for geo-acoustic parameters). The obtained uncertainty in the inversion results was assumed to have two distinct origins. The first origin is the inversion method itself, since each optimization will come up with some solution close to the exact optimum. Parameter coupling and the fact that some parameters hardly influence the acoustic propagation further contribute to this uncertainty. The second is due to oceanographic variability. Both contributions were evaluated through simulation. The contribution of oceanographic variability was evaluated through synthetic inversions that account for the actual sound speed variations as measured by the towed CTD-chain.     

Active noise control in ducts: some physical insights

The mechanisms of active noise control in a duct are examined. Acoustical measurements are used to determine directly the acoustic power flow associated with both primary and secondary sources as a function of secondary to primary source strength ratio and volume velocity relative phase angles. A complete analytical model is also developed which allows calculation of individual source power flows and total downstream power flow as a function of source strengths and relative phase angles for finite size sources. It is evaluated for monopole and dual secondary source arrangements, but can be extended easily to any number of secondary sources. The model considers a finite size primary source in the plane of the duct cross section and evaluates the effect that the secondary sources have on the primary source power output. Measurements of individual source output powers and total downstream acoustic powers agree well with theoretical predictions. It is demonstrated that, for the monopole system, sound attenuation is achieved primarily by suppression of the primary source acoustic power output, with a little remaining power being absorbed by the secondary source. For the dual secondary source system, it is shown that the power is primarily absorbed by the secondary sources, but that, at phase and amplitude values slightly different to optimum, noise reduction is achieved by a combination of energy absorption and primary source power suppression. The analysis also demonstrates the dependence of the achievable noise reduction on secondary source size and location with respect to the primary source.     

大功率调制气流声源阵列的相干合成实验研究

完成了调制气流声源阵列的相干合成实验. 提出了利用主动相位控制方法实现调制气流声源阵列相干合成的思路, 介绍了基于随机并行梯度下降算法的声源阵列相干合成的原理. 对利用该算法实现声源阵列的相干合成进行了数值模拟, 完成了双调制气流声源阵列在远场的相干合成实验, 并给出算法参数的合理设置方案. 实验结果显示, 基频成分的相干合成效果明显, 算法收敛时测点处的声压级相比单源发射增加了4 dB, 接近于各单源功率谱中基频成分相干合成、其他频率成分非相干合成的结果; 结果表明实验中算法能够有效控制各调制气流声源辐射声波的相位, 取得了明显的相干合成效果. 关键词： 调制气流声源 相干合成 随机并行梯度下降 高阶谐波     

适用于任意形状封闭空间的声场预测相干模型

针对现有几何声学的方法对封闭空间内声场进行预测时在中低频段出现较大误差的问题,该文提出一种近似圆锥声束追踪法和相干反射场理论相结合的声场预测新模型。在近似圆锥声束追踪法基础上,考虑声束轴线在边界多次反射时声压和相位的改变,最后计算不同声波之间的干涉效应,建立一种适用于任意形状封闭空间的声场预测相干模型。利用该模型对某一矩形封闭空间进行声场预测,通过对边界元法、Raynoise软件相干和非相干算法的预测结果和本模型的数值模拟结果对比。结果表明,文中提出的方法和边界元法的计算结果在中低频段非常吻合,两者的计算结果平均绝对误差为1.1 d B。本模型在中低频率下与同样考虑了相位的Raynoise相干算法相比有更好的准确性,在较高频率上,本模型计算结果与Raynoise相干算法计算结果非常吻合。