A Method for Increasing the Sensitivity of Phase Doppler Interferometry to seed particles in liquid spray flows

A method has been developed to increase the sensitivity of phase Doppler interferometry-based particle sizing systems to small particles in the presence of a spray containing large and small droplets; an important consideration when using seed particles to track the gas-phase velocity in multi-phase flows. The method, applicable to PDPA systems configured to operate in first and higher order refraction mode, involves doping the sprayed liquid with a dye that is strongly absorbing at the incident laser wavelengths. This results in greatly diminished scattered intensity from larger droplets, thus allowing the photomultiplier gain to be set to a level sufficient to easily detect small particles without saturation. Tests conducted indicate that, at a collection angle of 30° and droplet absorptivity of γ = 0.014/μm, the PDPA can accurately size absorbing droplets up to approximately 200 μm. This upper limit can be extended by changing selection angle. Tests performed with an actual spray demonstrated that the method allowed detection of 1 μm to 235 μm droplets; more than four times the instrument's usual range of 50: 1. A data correction scheme to determine the effective probe volume radius for each particle size class has been developed for absorbing particles, as standard correction schemes derived for non-absorbing droplets excessively weigh distributions toward smaller particles.     

Interaction of Annular Air Jet with a Non-Evaporating Liquid Spray

The effects of a concentric annular air jet on the structure of a liquid spray have been examined under isothermal conditions using Phase Doppler interferometry, and flow visualization techniques. Local measurements of drop size, velocity, volume flux, and number density have been made simultaneously and non-intrusively. The results show that the initial spray cone widens substantially with increasing air flow while the overall spray envelope remains essentially the same. The air jet creates a narrow high mass flux region of small droplets in the core of the spray, surrounded by a nearly uniform flux region extending almost to the boundary of the spray. Line averaged mean diameters are found to be slightly smaller, indicating that the annular air jet plays a role improving the atomization process as well.     

Large eddy simulation of a turbulent spray jet generated by high-pressure injection: impact of the in-nozzle flow

The turbulence properties of a gas spray jet generated through the injection of a high-pressure atomising spray were studied in the context of the Euler–Lagrange formulation using a large eddy simulation (LES) approach. The study's main aim was to investigate nozzle flow effects on flow and turbulence statistics for a two-phase jet flow in the near and far fields of the spray. The study investigated the injection of an existing in-nozzle flow at the spray inlet. Simulation results were compared with measurements obtained for non-evaporating sprays under quasi-steady conditions, which, in practice, correspond to a long-duration injection. Both simulated high-injection pressure cases showed a good agreement with experimental data. A two-stage evolution of the spray was observed. The flow of the gas jet first developed along the spray cone, followed by the appearance of highly vortical structures around and within the spray. Cavitation in the nozzle flow resulted in an observed asymmetry of the generated gas spray jet: on the gas spray jet side of the nozzle (relative to the cavitation side), stronger jet spreading occurred, and droplets were smaller and slower. The spray jet typically exhibited an ellipsoidal cross-sectional shape. The paper provides a characterisation of the asymmetry that persisted for the duration of the spray evolution (at least for the distances considered here).     

Flow visualization and laser measurement on particle modulation to gas-phase turbulence

Particle modulation to turbulence is investigated experimentally by means of PDPA, PIV and flow visualization for a gas-particle two-phase jet flow. Large particles can enhance the small-scale vortex, so that gas-phase turbulence intensity is increased, while small particles may delay the rolling up of the gas vortex, so that gas-phase turbulence intensity is attenuated. The critical particle size range for such different effects is between 150 σm and 200 σm, corresponding to the Stokes number is between 88 and 157 under the present flow conditions. The PIV results show small particles can retain the gas-phase vortex structure, while large particles can break large vortex structure. The particle Stokes number is not the only judgment standard whether particles enhance or attenuate gas-phase turbulence. The CTI (Change of Turbulence Intensity) number can mark off particle modulation on turbulence in two-phase flow, but more studies are needed.     

Further Development and Application of a Tomographical Data Processing Method for Laser Diffraction Measurements in Sprays

Using a tomographical transformation, a data processing method is developed to extend the Malvern line-of-sight measurements based on laser diffraction theory into pointwise spatial distributions of various spray characteristics including droplet volume and number concentrations as well as all mean diameters of practical interest. The method has been applied to characterize the structures of sprays injected into still ambient air and annular air streams with various liquid and air flow rates. It is found that the various mean droplet diameters may have different tendencies of radial variations, exhibiting their respective importance in characterizing sprays, and that the air flow can significantly modify the spray structure along both the radial and axial directions and may cause the dilution or accumulation of droplets in certain regions.     

颗粒湍流扩散的数值模拟

1引言颗粒湍流扩散是气固两相流中的一个重要的研究课题,近年来,国外有大量文献报道这方面的工作。因为颗粒的湍流扩散的研究的一个基本问题就是湍流的描述,它一方面可以来检验湍流描述的正确性;另一方面,该问题是气固两相流理论中,特别是颗粒群轨道模型中一个难点。描述湍流大体上可分为两种方法。一是直接数值模拟方法（DNS）,J．B．Mclaughlin对管流内颗粒沉降的研究就基于直接数值模拟山,K．D．squires和J．K．Eaton对颗粒扩散的研究也基于DNS［2］,DNS一般只适用于低Reynolds数。另一方面,用随机方法来模拟湍流,该…     

A study on turbulence modulation via an analysis of turbulence anisotropy-invariants

We investigate the turbulence modulation by particles in a turbulent two-phase channel flow via an analysis of turbulence anisotropy-invariants. The fluid turbulence is calculated by a large eddy simulation with a point-force two-way coupling model and particles are tracked by the Lagrangian trajectory method. The channel turbulence follows the two-component turbulence state within the viscous sub-layer region and outside the region the turbulence tends to follow the right curve of the anisotropy-invariant....     

Peculiarities of propagation of the dispersed phase in a gas-droplet flow downstream of a pipe sudden expansion

The results of numerical simulation of the propagation of the dispersed phase in a gas-droplet flow downstream of a pipe sudden expansion for small initial mass concentrations of particles (M _L1 = 0–0.1) are presented. Fine-dispersed droplets with the Stokes numbers Stk < 1 are entrained by a separated flow and are present in the whole cross section of the pipe. The near-wall region of the pipe is free of fine particles due to intense evaporation. Heavy particles (Stk > 1) do not get in the recirculation flow region and are present only in the mixing layer and in the flow core. It is shown that the addition of fine-dispersed droplets suppresses the energy of the gaseous phase turbulence in the separated flow. The results are compared with the experimental data for two-phase separated flows and are found to be in the conformity with these data.     

Sizing Large Hollow Micro-Balloons with the phase doppler interferometer

A combined theoretical and experimental study has been conducted to evaluate the effectiveness of using large, hollow micro-balloons as LDV seed particles. The study has focused on the ability of phase Doppler systems to size hollow microballoons, the ability of large micro-balloons to respond to high frequency spatial and temporal flow field variations, and the overall advantages and disadvantages of using large microballoons instead of conventional LDV seed particles, such as very small water droplets or polystyrene latex (PSL) particles. This paper discusses the development of a theoretical phase Doppler response model for stratified spheres, the experimental facility, and the theoretical and experimental results.     

Vortex formation in a shock-accelerated gas induced by particle seeding

An instability forms in gas of constant density (air) with an initial nonuniform seeding of small particles or droplets as a planar shock wave passes through the two-phase medium. The seeding nonuniformity is produced by vertical injection of a slow-moving jet of air premixed with glycol droplets or smoke particles into the test section of a shock tube, with the plane of the shock parallel to the axis of the jet. After the shock passage, two counterrotating vortices form in the plane normal to that axis. The physical mechanism of the instability we observe is peculiar to multiphase flow, where the shock acceleration causes the second (embedded) phase to move with respect to the embedding medium. With sufficient seeding concentration, this leads to entrainment of the embedding phase that acquires a relative velocity dependent on the initial seeding, resulting in vortex formation in the flow.     

High-speed non-intrusive measurements of fuel velocity fields at high-pressure injectors

Using a single high-speed camera and a frequency modulated laser, a novel approach is presented for fast velocity field measurements in unsteady spray flows. The velocity range is from zero up to several 100 m/s, which requires a high measurement rate and a large dynamic. Typically, flow measurements require to seed tracer particles to the fluid. A paradigm shift to seeding-free measurements is presented. The light scattered at the phase boundaries of the fluid droplets is evaluated. In order to validate the high-speed measurement system, a detailed uncertainty analysis is performed by means of measurements as well as simulations. Thereby, variations of the scattered light intensity, which are based on the high temporal velocity gradients, are found to be the main contribution to the uncertainty. The eventually measurement results, obtained at a measurement rate of 500 kHz, exhibit spray velocities ranging from 0 m/s up to 400 m/s in less than 1 ms, and the detection of unsteady and irregular flow phenomena with a characteristic time of several μs is achieved. This demonstrates the high measurement rate, the high temporal resolution and the large measurement range of the proposed high-speed measurement system.     

Numerical simulation of the two-phase flow produced by spraying a liquid by a nozzle

A numerical experiment on the simulation of the two-phase flow formed during spraying of a liquid by a nozzle has been described. The radial and axial velocity profiles of the droplets and gas in the free spray and in the two-phase flow through a cylindrical apparatus have been calculated and represented taking into account the early drag crisis of droplets and peculiarities of turbulent friction in the gas, which was detected in previous experiments. The distinguishing feature of the numerical model of the two-phase flow is that it employs the differential equations describing the nonstationary flow of a compressible gas as the initial equations. In transition to their difference analog, the familiar Lax–Wendorff algorithm has been used. A comparison of the results of calculations based on this model with experimental data has demonstrated their concordance.     

LES-DSMC方法研究超细颗粒气固两相流动过程

采用考虑颗粒脉动流动对气相湍流流动影响的大涡模拟(LES)研究气相湍流,采用直接模拟蒙特卡罗方法(DSMC)模拟颗粒间的碰撞。单颗粒运动满足牛顿第二定律,颗粒相和气相相间作用的双向耦合由牛顿第三定律确定,考虑超细颗粒间的van der Waals作用力。数值模拟垂直管内超细颗粒气固两相流动,对颗粒相速度、浓度以及团聚物流动过程进行分析。     

Vortex structures and temperature fluctuations in a bluff-body burner

Vortical and thermal structures of non-premixed propane flame in a bluff-body burner are studied experimentally in the transition from laminar to turbulent flow. In particular, we focus attention on the effect of annular air flow on the flame. The small-scale inner vortices inside the flame is stimulated by the annular air flow, and outside the flame, small eddies due to turbulence rather than the large-scale outer vortices due to thermal buoyancy become dominant with increasing air velocity. The interrelation between the vortical and thermal structures is analyzed by looking at the frequency spectrum and probability density function of temperature fluctuations.     

甲醇喷雾湍流反应流的JPDF数值模拟

喷雾湍流燃烧过程中,液滴、湍流和化学反应之间强烈耦合,物理化学机理非常复杂。本文将速度-标量-频率联合概率密度函数JPDF输运方程方法应用于两相喷雾湍流反应流问题,利用火焰面模型解耦流动和化学反应动力学的耦合关系,建立起相应的数值计算模型。采用Monte-Carlo数值计算方法,针对澳大利亚悉尼大学Masri等人以甲醇为燃料所进行的湍流喷雾燃烧值班火焰这一试验进行了数值模拟,通过与Fluent下的计算结果及试验结果的对比分析,验证了本文所建模型的准确性。     

Visualization of two phase flow inside an effervescent atomizer

Effervescent atomization is one of the twin-fluid atomization methods while it has better performance in terms of smaller drop sizes and/or lower injection pressures. In order to investigate the effects of the internal flow patterns on droplet characteristics, a new kind of effervescent atomizer was designed and manufactured. The bubble forming process was visualized with a high-speed camera, while the droplet size was characterized with a LDV/PDA system. The experimental results show that there are three regimes of the two-phase flows inside the discharge orifice, one is bubbly flow, another is annular flow while the other is the intermittent flow. The flow patterns transfered from bubbly flow to intermittent flow and then to annular flow with decreasing of the water flow rate. In addition, with increasing of the working pressure or decreasing of the water flow rate, the SMD (Sauter mean diameter) of the droplets decreased and the axial mean velocity increased.     

Analysis of steady state polydisperse counterflow spray diffusion flames in the large Stokes number limit

A new mathematical analysis is presented of certain aspects of the behavior of opposed flow polydisperse spray diffusion flames within the framework of a model in which large slip is permitted between the droplets and their host surroundings. The sectional approach is used to model the polydisperse spray. Operating conditions are identified under which the inverses of sectional Stokes numbers are small spray-related parameters to be used in a perturbation analysis of the liquid phase governing equations. The steady state equations and their solutions are similar in form to the equivalent equations considered in previous work of the authors in which dynamical equilibrium of the droplets with the carrier phase was assumed. However, here there is much more mathematical complexity involved in the spray equations solution. A hybrid Eulerian–Lagrangian approach is also suggested to get an insight into the phenomenon of reversal in the motion of the droplets that has been reported in independent experimental and computational research. Computed results based on the analytical solutions up to the 1st order of approximation reveal the influence of large droplet slip on the droplets velocity field and on the spray diffusion flame’s thermal field, for which appreciable heterogeneous combustion can occur under the operating conditions considered.     

气固两相各向同性湍流的自适应网格模拟

气固两相湍流是一个复杂的多尺度,多物理场的难题.为了捕捉流场的小尺度涡以及其对颗粒的作用,传统上采用了静态的高分辨率网格,消耗极大的计算资源.本文基于小波算法对网格进行加密或疏化,从而实现网格的自适应.基于自适应网格的框架上,建立颗粒与流场分块的映射,搭建了欧拉-拉格朗日的气固两相流模拟的并行平台.通过对均匀各向同性湍...     

小液滴撞击壁面传热特性数值分析

小液滴撞击壁面现象在喷雾冷却等领域都有广泛应用.为研究小液滴(微米)撞击热壁面(非沸腾区)传热过程,建立了二维液滴撞壁瞬态模型,并采用相场方法对小液滴换热过程中对流热通量和导热热通量的大小进行了对比.研究结果表明:液滴撞击壁面初期形成“冷斑”,有利于小液滴与壁面的传热;小液滴撞击壁面过程中热通量峰值存在于三相接触点附近,数量级在105—106 W/m²;小液滴撞击壁面过程中受壁面浸润性和液滴尺寸对传导热通量的影响较为显著,而速度和液滴尺寸对对流热通量的影响较为显著;大多数情况下,小液滴撞击壁面传导热通量数量级在103—105 W/m²,对流热通量数量级在104—106 W/m²,对流热通量大于传导热通量,在整个换热过程中占据主导地位.     

单喷嘴横流气雾两相流掺混实验研究

采用PIV设备测量了方腔通道内气体液雾两相交叉横向流的掺混,液滴通过旋流雾化喷嘴产生,获得了沿横流方向不同掺混横截面的液滴分布图和液滴运动流线图.比较了三种喷嘴布置角度(60°,90°,120°)在不同气流速度下的掺混效果.结果表明:在横流作用和壁面约束的影响下,流场中出现不同尺度的漩涡,大涡的卷吸与离心作用导致液滴分布不均匀,影响了雾滴与气相的掺混.随着掺混的发展,大涡的强度和尺寸均减小,对雾滴影响减弱,掺混变好;三种喷嘴布置角度下,60°掺混最好,90°次之,120°最差.