Dual-wavelength distributed Bragg reflector semiconductor laser based on composite resonant cavity

We report a monolithic integrated dual-wavelength laser diode based on a distributed Bragg reflector (DBR) composite resonant cavity. The device consists of three sections, a DBR grating section, a passive phase section, and an active gain section. The gain section facet is cleaved to work as a laser cavity mirror. The other laser mirror is the DBR grating, which also functions as a wavelength filter and can control the number of wavelengths involved in the laser action. The reflection bandwidth of the DBR grating is fabricated to have an appropriate value to make the device work at the dual-wavelength lasing state. We adopt the quantum well intermixing (QWI) technique to provide low-absorption loss grating and passive phase section in the fabrication process. By tuning the injection currents on the DBR and the gain sections, the device can generate 0.596 nm-spaced dual-wavelength lasing at room temperature.     

基于相位采样光栅的双波长光纤激光器

提出一种基于相位采样的分布反馈式双波长光纤激光器,在不同的空间化置同时引入相位和采样周期的突变.通过理论分析,这种结构能够实现谐振腔的分离,使不同波长的光波利用不同空间位置的增益介质,克服增益介质均匀加宽引起的模式竞争,实现双波长激射.采用准分子激光器和均匀相位模板,在掺铒光纤上制作波长差为0.46 nm的舣波长光纤激光器,能够实现舣波长激射.通过实验,对激光器输出功率和光栅强度的关系进行研究,表明输出功率和光栅强度成反比.     

Tunable microwave photonic notch filter using a dual-wavelength fiber laser with phase modulation

A novel tunable microwave photonic notch filter using a phase-modulated dual-wavelength fiber laser is presented. A stable dual-wavelength erbium-doped fiber laser with a linear cavity is formed by a polarization-maintaining uniform fiber Bragg grating (PM-FBG) and a polarization maintaining linearly chirped fiber Bragg grating (PM-LCFBG), both of which were fabricated on a high-birefringence (Hi-Bi) fiber. It is found that a stable room-temperature dual-wavelength operation can be achieved due to the presence of two reflection peaks arising from the orthogonal states of polarization (SOP) of the PM-FBG. Experimental results show stable dual-wavelength lasing operation with a wavelength separation of ∼0.36 nm and a large optical signal-to-noise ratio (OSNR) of over 40 dB under room temperature. The dual-wavelength fiber laser is combined with a phase modulator and a segment of single-mode fiber (SMF) as a dispersive device to form a tunable microwave photonic notch filter. By stretching the PM-FBG to tune the wavelength separation of the dual-wavelength fiber laser, a tunable microwave photonic notch filter with various free spectral ranges (FSRs) and a rejection ratio greater than 35 dB was developed.     

Simple erbium-doped dual-ring fiber laser configuration for stable and tunable dual-wavelength output

We propose and experimentally investigate a stable and tunable dual-wavelength erbium-doped fiber (EDF) dual-ring laser scheme. Here, two tunable bandpass filters (TBFs) are used inside the dual-ring gain cavity to generate dual-wavelength lasing. And, due to the gain competition of the EDF gain cavity, the mode-spacing (Δλ_s) of lasing dual-wavelength will be limited at different operating wavelengths. Hence, the minimum and maximum mode-spacing in the proposed EDF laser scheme are 0.75 and 15.35 nm in C-band range. Besides, the output performances of proposed fiber laser have also been studied and analyzed.     

A stable dual-wavelength fiber laser with tunable wavelength spacing using a polarization-maintaining linear cavity

We propose and experimentally demonstrate a stable dual-wavelength erbium-doped polarization-maintaining (PM) fiber laser with tunable wavelength spacing using an all-PM linear cavity that makes use of two reflection peaks from the PM fiber Bragg grating (PM-FBG). Experimental results show stable dual lasing lines with a wavelength separation of ∼0.22 nm and a large optical signal-to-noise ratio (OSNR) of over 40 dB under room temperature. By applying axial strain to the PM-FBG, the center wavelengths of the two lasing lines can be tuned over several nanometers and the wavelength separation between the lasing lines can also be tuned to as small as 0.05 nm, which, to our knowledge, is the smallest wavelength spacing ever obtained from a stable room-temperature dual-wavelength fiber laser. The proposed laser configuration has the advantages of simple structure, low loss, stable dual-wavelength operation and a very small lasing linewidth of ∼5 kHz . PACS 42.55.Wd; 42.81.-i; 42.81.Gs     

Realization of Stable Narrow Linewidth Dual-Wavelength Lasing in an Erbium-Doped Fibre Laser by Cleaving the Wavelength-Selective Filter Spectrum

We propose and demonstrate a new concept of stable narrow-line-width and close wavelength spacing dualwavelength lasing in an Er-doped fibre ring laser （EDFRL） by cleaving the spectrum with a wavelength-selective component in the EDFRL. A fibre loop mirror （FLM） combining with a polarization controller （PC） acts as the cleaver. The cleaver can produce a fine pectinate spectrum. By adjusting the PC, the fine pectinate spectrum can be so changeable that cleaving the spectrum of a fibre Bragg grating （FBG） into two parts. As a result, we obtain the dual-wavelength fibre lasering with a bandwidth of only 0.03nm and a wavelength spacing of only 0.07nm. Furthermore, the laser can also perform stable switchable single wavelength or stable different-bandwidth dual-wavelength by carefully adjusting the PC at room temperature.     

利用倾斜光纤光栅的可开关双波长光纤激光器

报导了一种在四波混频作用下利用倾斜光纤布拉格光栅进行波长选择的可开关双波长掺铒光纤激光器。通过将倾斜光纤光栅与单模光纤进行横向错位焊接,使光栅的反向LP01和LP11两个模式具有相近的有效反射率,从而可以用来进行激光器的双波长选择。接入腔内的一段高非线性光子晶体光纤引入的四波混频效应克服了模式竞争,使得双波长激光在室温下稳定振荡。腔内起偏器和偏振控制器的联合作用可产生依赖于波长的损耗,以补偿光纤光栅两反射峰峰值的大小差异。基于以上原理,通过调节腔内的偏振态,该激光器实现了室温下稳定的双波长输出,也实现了在两波长之间的转换。两波长激光均有超过45 dB的信噪比,最大的功率波动为0.8 dB     

单片集成微环反射器可调谐半导体环形激光器理论和数值模型(英)

设计了一种新颖的快速可调谐激光器。这种激光器在恒定电流泵浦的有源微环组成的半导体环形激光器腔外部集成一个可调谐的无源微环反射器,其结构将决定激光器激射腔模的有源腔和无源可调谐部分分离,有助于提高调谐速度。与光栅结构的激光器相比,该激光器结构简单,具有强烈的选模功能,不需要相位匹配部分,输出波长不受调谐部分热效应的影响。基于多模速率方程建立了激光器的理论和数值模型,数值仿真结果表明该激光器能在选取的15个腔模范围内完成数字调谐,且具有40 mA的较低阈值电流和适中的边模抑制比。     

Tunable dual-wavelength fiber laser based on a polarization-maintaining fiber Bragg grating and a Hi-Bi fiber optical loop mirror

We demonstrate experimentally the operation of a linear cavity dual-wavelength fiber laser using a polarization maintaining fiber Bragg grating (PM-FBG) as an end mirror that defines two closely spaced laser emission lines. The PM-FBG is also used to tune the laser wavelengths. The total tuning range is ∼8 nm. The laser operates in a stable dual-wavelength mode for an appropriate adjustment of the cavity losses for the generated wavelengths. The high birefringence (Hi-Bi) fiber optical loop mirror (FOLM) is used as a tunable spectral filter to adjust the losses. The FOLM adjustment was performed by the temperature control of the Hi-Bi fiber.     

Microwave generation using an all polarization-maintaining linear cavity dual-wavelength fiber laser with tunable wavelength spacing

A stable dual-wavelength erbium-doped fiber laser with a linear cavity is formed by a polarization-maintaining uniform fiber Bragg grating (PM-FBG) and a polarization-maintaining linearly chirped fiber Bragg grating (PM-LCFBG), both of which were fabricated on a high-birefringence (Hi-Bi) fiber. Experimental results show stable dual-wavelength lasing operation with a wavelength separation of ∼0.22 nm, which can be tuned down to as small as 0.05 nm and a large optical signal-to-noise ratio (OSNR) of over 40 dB under room-temperature. Microwave signal at frequency of 9.41, 18.03 and 27.46 GHz is achieved by heterodyned the output lasing wavelengths on a photodetector.     

Wavelength spacing tunable dual-wavelength single-longitudinal-mode fiber ring laser based on fiber Bragg gratings

A wavelength spacing tunable dual-wavelength single-longitudinal-mode fiber ring laser is presented by employing separated fiber Bragg gratings. By using a saturable-absorption-induced grating filter and a hybrid gain medium formed by a semiconductor optical amplifier and an erbium-doped fiber amplifier, stable single-longitudinal-mode lasing is achieved at room temperature. Wavelength spacing of the proposed fiber laser can be tuned in a range from 0.1 to 1.3 nm.     

A novel tunable dual-wavelength external-cavity laser diode array and its applications

We review the principles and characteristics of a novel tunable external-cavity laser diode source. It can operate as either a continuous wave (CW) single-wavelength, a CW dual-wavelength, a single-wavelength mode-locked, or a tunable dual-wavelength mode-locked laser. The gain medium is a commercial laser diode array. The telescopic external cavity consists of a grazing-incidence grating, a lens and a stripe-mirror. The external cavity provides functions of wavelength selection, dispersion compensation and spatial mode control. The characteristics of the laser under CW or mode-locked operation are described. The dual-wavelength laser output exhibits beat note beyond 7 THz. The tunable multi-terahertz beat frequency is characterized by a non-collinear intensity autocorrelation technique. A dual-wavelength interferometer that uses a tunable dual-wavelength laser as the light source is demonstrated. Finally, theoretical analysis is presented, which demonstrates that the dual-wavelength output of the laser is stable if the modes at the two wavelengths correspond to different array lateral modes.     

Design of waveguide-integrated semiconductor laser sources for optical frequency comb generation

A numerical study of threshold gain and modal dispersion in integrated semiconductor laser optical frequency comb sources is presented. We consider an example device where one of the cleaved facets of the laser is replaced by a short Bragg grating section and show that as many as 16 modes can be selected at the first harmonic of the underlying Fabry-Perot cavity. An intracavity approach to limiting the grating-induced dispersion that can be implemented directly through the grating profile is demonstrated.     

95 GHz millimeter wave signal generation using an arrayed waveguide grating dual wavelength semiconductor laser

We report the generation of a 95?GHz carrier frequency by optical heterodyning of two wavelengths from adjacent channels from an arrayed waveguide grating-based multiwavelength laser. The extended cavity structure of the device provides low phase noise and narrow optical linewidth, further enhanced by the intracavity filter effect of the arrayed waveguide grating. We demonstrate that the generated RF beat note, at 95?GHz, has a -3 dB linewidth of 250?kHz. To the best of our knowledge, this is the narrowest RF linewidth generated from a free-running dual-wavelength semiconductor laser. The device is realized as a photonic integrated circuit using active-passive integration technology, and fabricated on a multiproject wafer run, constituting a novel approach for a compact, low-cost dual-wavelength heterodyne source.     

全介质镜微腔的结构设计与发光特性的模拟

设计了4种不同介质镜结构的全介质镜λ微腔,并模拟研究了腔内有机发光层的发光特性。结果表明,DBR结构的不同会导致腔镜反射相移的变化,从而最终改变了器件的透射光谱、腔内驻波电场分布、PL光谱峰值位置和强度等参数。只有合理的器件结构设计才能使腔内的发光得到有效的增强。对称偶数层DBR构成的λ腔可以使谐振峰位置的PL光谱峰值强度增加59倍。     

All optical Flip-Flop based on a nonlinear DFB semiconductor laser: Theoretical study

A new design of an all optical Flip-Flop is proposed. It consists of a nonlinear distributed feedback (DFB) laser. The wave guiding layer of the DFB laser consists of linear grating section followed by a nonlinear one, and both sections are separated by a phase shift section. In the OFF-state, the real part of the refractive index in the wave guiding layer forms a Bragg grating. In the ON-state, it forms a Bragg grating with a phase shift section. Optical gain is achieved by current injection in the semiconductor active layer. Nonlinearity in the nonlinear layers of the semiconductor grating was achieved by direct absorption at the edge of the absorption band (Urbach tail). Numerical simulation shows that the device switches in a nanosecond time scale.     

Modulation instability induced by cross-phase modulation in a dual-wavelength dispersion-managed soliton fiber ring laser

We report on the observation of the modulation instability induced by cross-phase modulation in a dual-wavelength operation dispersion-managed soliton fiber ring laser with net negative cavity dispersion. The passively mode-locked operation is achieved by using a nonlinear polarization rotation technique. A new type of dual-wavelength operation, where one is femtosecond pulse and the other is picosecond pulse operation, is obtained by properly rotating the polarization controllers. When the dual-wavelength pulses are simultaneously circulating in the laser ring cavity, a series of stable modulation sidebands appears in the picosecond pulse spectrum at longer wavelength with lower peak power due to modulation instability induced by cross-phase modulation between the two lasing wavelengths. Moreover, the intensities and wavelength shifts of the modulation sidebands can be tuned by varying the power of the femtosecond pulse or the lasing central wavelengths of the dual-wavelength pulses. The theoretical analysis of the modulation instability induced by cross-phase modulation in our fiber laser is also presented.     

A Continuously Tunable Erbium-Doped Fibre Laser Using Tunable Fibre Bragg Gratings and Optical Circulator

A continuously tunable erbium-doped fibre laser （TEDFL） based on tunable fibre Bragger grating （TFBG） and a three-port optical circulator （OC） is proposed and demonstrated. The OC acts as a 100%-reflective mirror. A strain-induced uniform fibre Bragger grating （FBG） which functions as a partial-reflecting mirror is implemented in the linear cavity. By applying axial strain onto the TFBG, a continuously tunable lazing output can be realized. The wavelength tuning range covers approximately 7.00nm in C band （from 1543.6161 to 1550.3307nm）. The side mode suppression ratio （SMSR） is better than 50 dB, and the 3 dB bandwidth of the laser is less than 0.01 nm. Moreover, an array waveguide grating （AWG） is inserted into the cavity for wavelength preselecting, and a 50 km transmission experiment was performed using our TEDFL at a 10 Gb/s modulation rate.     

Photonic generation of microwave signals using a dual-transmission-band FBG filter with controllable wavelength spacing

Two π-phase shifts are introduced in a uniform fiber Bragg grating (FBG) structure and a dual-transmission-band opens in the stopband of FBG. When incorporating this kind of FBG filter in a fiber ring cavity with a semiconductor optical amplifier (SOA) acted as gain medium, a stable dual-wavelength lasing with wavelength spacing of 0.032, 0.052 and 0.068 nm is achieved, respectively. Therefore, the laser output is heterodyned on a photodetector and desired microwave frequencies of 3.15, 6.16 and 8.08 GHz are generated. PACS 41.20.-q; 42.55.Wd; 42.81.-i     

Tunable dual-wavelength fiber laser based on a single fiber Bragg grating in a Sagnac loop interferometer

We propose a simple dual-wavelength Er-doped fiber laser configuration based on a dual-wavelength fiber Bragg grating written on the splice joint between two different fibers for wavelength-selective filter in the Sagnac loop interferometer. The wavelength separation between the adjacent lasing wavelengths is 1.12 nm and the side-mode suppression ratio (SMSR) is over 55 dB. The output power variation is less than 0.8 dB over a two-minute period. Moreover, the lasing wavelength can be effectively tuned using the thermal heating method.