Modeling of the nanoparticle coagulation in pulsed radio-frequency capacitively coupled C_2H_2 discharges

The role of pulse parameters on nanoparticle property is investigated self-consistently based on a couple of fluid model and aerosol dynamics model in a capacitively coupled parallel-plate acetylene(C2H2) discharge. In this model, the mass continuity equation, momentum balance equation, and energy balance equation for neutral gas are taken into account.Thus, the thermophoretic force arises when a gas temperature gradient exists. The typical results of this model are positive and negative ion densities, electron impact collisions rates, nanoparticle density, and charge distributions. The simulation is performed for duty ratio 0.4/0.7/1.0, as well as pulse modulation frequency from 40 k Hz to 2.7 MHz for pure C2H2 discharges at a pressure of 500 m Torr. We find that the pulse parameters, especially the duty ratio, have a great affect on the dissociative attachment coefficient and the negative density. More importantly, by decreasing the duty ratio, nanoparticles start to diffuse to the wall. Under the action of gas flow, nanoparticle density peak is created in front of the pulse electrode,where the gas temperature is smaller.     

Structural properties of amorphous TiO<Subscript>2</Subscript> nanoparticles

Structural properties of amorphous TiO₂ spherical nanoparticles have been studied in models with different sizes of 2 nm, 3 nm, 4 nm and 5 nm under non-periodic boundary conditions. We use the pairwise interatomic potentials proposed by Matsui and Akaogi. Models have been obtained by cooling from the melt via molecular dynamics (MD) simulation. Structural properties of an amorphous nanoparticle obtained at 350 K have been analyzed in detail through the partial radial distribution functions (PRDFs), coordination number distributions, bond-angle distributions and interatomic distances. Moreover, we show the radial density profile in a nanoparticle. Calculations show that size effects on structure of a model are significant and that if the size is larger than 3 nm, amorphous TiO₂ nanoparticles have a distorted octahedral network structure with the mean coordination number Z_Ti-O ≈6.0 and Z_O-Ti ≈3.0 like those observed in the bulk. Surface structure and surface energy of nanoparticles have been obtained and presented.     

Fabricating tunable nanoparticle density gradients with the contact printing based approach

Recently, the generation of spatial gradient nanoparticle assemblies has attracted much attention. Such assemblies can be intriguing templates for building novel molecular architectures, and be employed as a combinatorial tool for quick determination of interaction selectivity for nanoparticles. In this communication, we report on convenient contact printing based techniques for generating lateral gradients containing nanoparticles with tunable geometry, scale and steepness. In the first method, octadecyltrichlorosilane (OTS) gradient surfaces were generated via the contact printing approach, and then spaces un-occupied by OTS molecules were back-filled with an amine-terminated silane, which allows the grafting of nanoparticles that were surface functionalized with carboxylic acid. By varying the size and geometry of the stamp, different geometrical gradients were generated. In addition, by changing the stamping procedures, either well-defined stepwise gradients or continuous gradients can be achieved. Furthermore, the contact printing based technique can be utilized in combination with diffusion of the aminosilane molecules to directly create its gradient, and consequently a nanoparticle density gradient.     

Luminescence from copper nanoparticles

The presence of copper nanoparticles in alumina and silica modifies their luminescence, and the changes in spectra are influenced by variations in the nanoparticle size distributions. Luminescence signals are sensitive to the total defect population. Thus the luminescence not only reflects changes caused by thermal annealing, which can modify both intrinsic defects and the copper nanoparticles, but also responds to the method of preparation of thin film layers. Copper nanoparticle influence on luminescence is reported both for ion-implanted bulk silica and for copper in pulsed laser deposition within alumina. Luminescence thus potentially offers a non-destructive monitor of the layer quality, reproducibility and growth conditions, as well as the state and size of the copper nanoparticles. Received: 29 June 2001 / Published online: 10 October 2001     

Combination of spark discharge and nanoparticle-enhanced laser-induced plasma spectroscopy

A combination of spark discharge and nanoparticle-enhanced laser-induced plasma spectroscopy is investigated. Depositing Au nanoparticles at the surface of a brass target can enhance the coupling of the target and the laser. More atoms in the brass sample are excited. As a secondary excitation source, spark discharge reheats the generated plasma, which further amplifies the enhancement results of nanoparticles. The spectral intensity with the spark discharge increases more obviously with nanoparticle concentration increasing than without the spark discharge. Also, plasma temperature and electron density are calculated by the Boltzmann plot and Stark broadening. The changes in the plasma temperature and electron density are consistent with the spectral emission changes.     

Preparation of luminescent Si nanoparticles by tailoring the size,crystallinity and surface composition

The preparation of sizeable quantities of luminescent Si nanoparticles (Si-np) with controlled morphology is a challenging task. Here, we describe two strategies aiming at size reduction of the Si-np produced in a laser-assisted silane pyrolysis reactor without detrimental effects on the process yield and on the nanoparticle structural and compositional properties. The first method is based on the addition of a sensitizer gas to dilute silane and consequently reduce the nucleation centres density without decreasing the reaction temperature. The second consists in the introduction of a collector at a variable distance from the irradiated region to freeze the particle growth and decrease the inter-particle sintering probability. We report on the characterization of the produced Si-np, and we show that by combining the two methods, we are able to prepare 4 nm crystalline core size nanoparticles with a productivity of 1 g per hour. We also describe the enhancement effect of the wet-chemical oxidation processes on the luminescence emission intensity of the Si-np.     

带电纳米颗粒与相分离的带电生物膜之间相互作用的分子模拟

纳米颗粒在纳米医药、细胞成像等领域有着非常广泛的应用,深入理解纳米颗粒与生物膜之间相互作用的微观机制是纳米颗粒合成与应用的重要基础.本文采用粗粒化分子动力学模拟的方法研究了带电配体包裹的金纳米颗粒与相分离的带电生物膜之间的相互作用.结果表明,通过改变金纳米颗粒表面的配体密度、配体带电种类和比例,以及膜内带电脂分子的种类,可以方便地调控纳米颗粒在膜表面或膜内停留的位置和状态.进一步从自由能的角度分析了带电纳米颗粒与带电生物膜之间相互作用的微观物理机制.本文对纳米粒子在纳米医药、细胞成像等领域的应用具有一定的理论参考意义.     

Synthesis of nanoparticles and suspensions by pulsed laser ablation of microparticles in liquid

Recent studies demonstrated that the process to produce metal and oxide nanoparticles by laser ablation of consolidated microparticles is a convenient and energy-efficient way to prepare nanoparticles. In this work, the novel process is applied to nanoparticle synthesis in the liquid environment and the results are compared with those by the gas-phase process. Metal and oxide nanoparticles are synthesized by pulsed laser ablation of the compacted metal microparticles using a Q-switched Nd:YAG laser in water. It is shown that the process is effective for preparing nanoparticle suspensions having relatively uniform size distributions. While the laser fluence and the degree of compaction strongly influence the size of the produced nanoparticle in air, the sedimentation time is shown to be the most critical factor to determine the mean size of the suspended particles.     

Magnetron and pulsed laser deposition of silver and gold nanoparticles and discontinuous films and their optical properties

Ag and Au nanoparticles are obtained by magnetron sputtering and pulsed laser deposition under different conditions, and the features of their absorption spectra associated with plasmon resonances are investigated. Optimal deposition conditions for obtaining small (5?C10 nm) silver nanoparticles with a high density of surface distribution include an increased argon pressure (2.5 × 10^?2 Torr) and a low discharge voltage (100 V). Gold nanoparticle arrays obtained by pulsed laser deposition at a temperature of 200°C in vacuum are more uniformly distributed on the substrates than those deposited at room temperature in argon. It is shown that the maximum of the plasmon absorption shifts toward shorter wavelengths with a decrease in the equivalent thickness of metal films and depends not only on this thickness but also on the type of substrate, which is responsible for the morphology of nanoparticle arrays.     

Determination of Particle Size,Core and Shell Size Distributions of Core–Shell Particles by Analytical Ultracentrifugation

In core–shell nanoparticle analysis, the determination of size distributions of the different particle parts is often complicated, especially in liquid media. Density matching is introduced as a method for analyzing core–shell nanoparticles using Analytical Ultracentrifugation (AUC), making it possible to obtain the core size distribution in liquid dispersions. For this approach, the density of the dispersion is adjusted to the density of the shell. Oil filled nanocapsules are utilized with component densities of around 1 g mL⁻¹ to demonstrate this technique. The shell size distribution is calculated supposing the particle size distribution as a convolution of the shell- and core size distributions. Finally, the distributions of core size, shell thickness, particle size, and particle density and thus particle composition are obtained. To clarify the effect of swelling, AUC measurements are combined with further size characterization methods like Particle Tracking Microscopy and Dynamic Light Scattering.     

Role of surface ligands in nanoparticle permeation through a model membrane: a coarse-grained molecular dynamics simulations study

How nanoparticles interact with biological membranes is of significant importance in determining the toxicity of nanoparticles as well as their potential applications in phototherapy, imaging and gene/drug delivery. It has been shown that such interactions are often determined by nanoparticle physicochemical factors such as size, shape, hydrophobicity and surface charge density. Surface modification of the nanoparticle offers the possibility of creating site-specific carriers for both drug delivery and diagnostic purposes. In this work, we use coarse-grained molecular dynamic simulations to explore the permeation characteristics of ligand-coated nanoparticles through a model membrane. We compare permeation behaviors of ligand-coated nanoparticles with bare nanoparticles to provide insights into how the ligands affect the permeation process. A series of simulations is carried out to validate a coarse-grained model for nanoparticles and a lipid membrane system. The minimum driving force for nanoparticles to penetrate the membrane and the mechanism of nanoparticle–membrane interaction were investigated. The potential of the mean force profile, nanoparticle velocity profile, force profile and density profiles (planar and radial) were obtained to explore the nanoparticle permeation process. The structural properties of both nanoparticles and lipid membrane during the permeation, which are of considerable fundamental interest, are also studied in our work. The findings described in our work will lead to a better understanding of nanoparticle–lipid membrane interactions and cell cytotoxicity and help develop more efficient nanocarrier systems for intracellular delivery of therapeutics.     

High-intensity near-field generation for silicon nanoparticle arrays with oblique irradiation for large-area high-throughput nanopatterning

We present near-field distributions around an isolated 800-nm silica or silicon nanoparticle, and nanoparticle arrays of 800-nm silica or silicon nanoparticles, on a silicon substrate by the finite-difference time-domain method when 800-nm light is irradiated obliquely to the substrate. Nanopatterning mediated with the nanoparticle system is promising for large-area, high-throughput patterning by using an enhanced localized near-field ablation by the nanoscattered light lens effect. The irradiation area cannot be extended for silica nanoparticles, because the optical field enhancement factor is low. Gold nanoparticles can generate highly enhanced near fields, although at present there are no useful ways to arrange the gold nanoparticles on the substrate at a high throughput. Silicon nanoparticles with high dielectric permittivity have optical characteristics of both silica and gold nanoparticles. The particle arrangement on the Si substrate is technically easy using a wet pulling process. From the calculation, high optical field intensity is acquired with oblique s-polarized irradiation to the substrate under silicon nanoparticle arrays, and the intensity is almost the same as that under gold nanoparticle arrays under the same condition. With this method, high-throughput nanopatterning for a large area would be achievable.     

Mode transition in dusty micro-plasma driven by pulsed radio-frequency source in C_2H_2/Ar mixture

Physical qualities of dusty plasma in the pulsed radio-frequency C_2H_2/Ar microdischarges are carefully investigated by a one-dimensional hydrodynamic model and aerosol dynamics model.Since the thermophoretic force has a great effect on the nanoparticle density spatial distribution,the neutral gas energy equation is taken into accounted.The effects of pulse parameters(dust ratio,modulation frequency) on the nanoparticle formation and growth process are mainly discussed.The calculation results show that,as the duty ratio increases,the mode transition from the sheath oscillation(a regime) to the secondary electron heating(7 regime) occurred,which is quite different from the conventional pulsed discharge.Moreover,the effect of modulation frequency on the width of sheath and plasma density is analyzed.Compared with the H_2CC~-ions,the modulation frequency effect on the nanoparticles density becomes more prominent.     

Strain distributions of confined Au/Ag and Ag/Au nanoparticles

The strain distributions of Au/Ag and Ag/Au nanoparticles confined in the Al2O3 matrix with different core sizes are investigated by using the finite element method, respectively. The simulation results clearly indicate that the compressive strains exerted on the Au/Ag and Ag/Au nanoparticles can be induced by the Al2O3 matrix. Moreover, it can be found that the strain gradient existing in a Au/Ag nanoparticle is much larger than that in a Ag/Au nanoparticle, which could be due to the larger Young's modulus of Au than that of Ag. With the core size increasing, the strain gradient existing in the Au/Ag nanoparticle becomes larger, while the strain gradient existing in the Ag/Au nanoparticle keeps constant. These different strain distributions may have significant influences on the structures and morphologies of the Au/Ag and Ag/Au nanoparticles, leading to the different physical properties for potential applications.     

Injection of synthesized FePt nanoparticles in hole-patterns for bit patterned media

FePt nanoparticles of uniform sizes, compositions, and crystal structures can be obtained by chemical synthesis. Additionally, the nanoparticles can be well dispersed by the adsorption of a surfactant on the nanoparticle surface. Previously, the immobilization of FePt nanoparticles on a thermal oxide Si substrate was carried out by chemical synthesis, utilizing the Pt-S bonding between the -SH functional group in (3-mercaptopropyl)trimethoxysilane, MPTMS and Pt in FePt nanoparticles. However, controlling FePt nanoparticle arrays by this synthesis method was very difficult. In the present study, we attempted to control the distortion of the arrangement of FePt nanoparticles using an MPTMS layer modified with a silane coupling reaction and a geometrical structure prepared by ultraviolet nanoimprint lithography (UV-NIL). In this study, the hole-patterns used for the geometrical structure on Si(1 0 0) were 200 nm wide, 40 nm deep, and had a 500 nm pitch. The 5.6 nm FePt nanoparticles were used to coat the hole-patterns by using a picoliter pipette. An XHR-SEM image clearly revealed that the FePt nanoparticles were successfully arranged as a single layer with an average pitch of 10.0 nm by Pt-S bonding in the hole-patterns on Si(1 0 0).     

Effect of deposition parameters on morphology and size of FeCo nanoparticles synthesized by pulsed laser ablation deposition

The experimental parameters that control the surface morphology and size of iron cobalt nanoparticles synthesized at room temperature by pulsed laser ablation deposition (PLAD) technique have been systematically investigated. The nanoparticle synthesis has been achieved at higher operating gas pressures of argon. It was found that nanoparticles upon deposition formed small clusters, the size of which increases with decreasing pressure, increasing laser-energy density, and decreasing target-to-substrate distance. This trend could be attributed to change in the kinetic energy of deposited nanoparticles with varying argon pressure, laser-energy, and target-to-substrate distance. The nanoparticles size and size distribution showed strong dependence on argon pressure and weak dependence on laser-energy density and target-to-substrate distance.     

Influence of synthesis parameters on iron nanoparticle size and zeta potential

Zero valent iron nanoparticles are of increasing interest in clean water treatment applications due to their reactivity toward organic contaminants and their potential to degrade a variety of compounds. This study focuses on the effect of organophosphate stabilizers on nanoparticle characteristics, including particle size distribution and zeta potential, when the stabilizer is present during nanoparticle synthesis. Particle size distributions from DLS were obtained as a function of stabilizer type and iron precursor (FeSO₄·7H₂O or FeCl₃), and nanoparticles from 2 to 200 nm were produced. Three different organophosphate stabilizer compounds were compared in their ability to control nanoparticle size, and the size distributions obtained for particle volume demonstrated differences caused by the three stabilizers. A range of stabilizer-to-iron (0.05–0.9) and borohydride-to-iron (0.5–8) molar ratios were tested to determine the effect of concentration on nanoparticle size distribution and zeta potential. The combination of ferrous sulfate and ATMP or DTPMP phosphonate stabilizer produced stabilized nanoparticle suspensions, and the stabilizers tested resulted in varying particle size distributions. In general, higher stabilizer concentrations resulted in smaller nanoparticles, and excess borohydride did not decrease nanoparticle size. Zeta potential measurements were largely consistent with particle size distribution data and indicated the stability of the suspensions. Probe sonication, as a nanoparticle resuspension method, was minimally successful in several different organic solvents.     

Engineering embedded metal nanoparticles with ion beam technology

In this paper, we summarize our recent results of study on how to engineer the embedded metal nanoparticles in silica by ion implantation and ion irradiation technologies, including controlling the size, distribution and morphology of nanoparticles. The optical properties of the tailored nanoparticle composites are studied. Thermal annealing, electron beam irradiation, and chemical erosion are used to study the stability of these embedded nanoparticles by ex situ or in situ transmission electron microscopy observation.     

On the Decomposition of Silane in Plasma Deposition Reactors

In a low-pressure discharge, plasma-enhanced decomposition of silane proceeds by various channels including electron-impact, ion- and radical-induced, and heterogeneous reactions. The results of several experiments are presented to clarify the relative importance of the processes. The conclusions of these studies and associated analysis are that the dominant processes are strongly influenced by the gas residence time, the power density input, and the electronegative characteristics of the silane discharge.     

银纳米颗粒减反射特性的理论研究

为增强晶体硅太阳电池的光利用效率,提高光电转换效率,研究了金属银纳米颗粒的光学散射性质.基于银纳米粒子表面等离子激元效应和MIE散射理论,采用Matlab数值计算,理论分析了不同银纳米颗粒尺寸和银粒子分布密度对太阳光谱各波长的散射特性.获得了实现高的光透过率所需最佳银纳米颗粒半径范围,研究发现随着银纳米颗粒半径增加,偶极峰红移、高极峰逐渐出现.定量地给出了最佳颗粒分布密度随银粒子半径的变化规律,建立了计算减反射膜透射率的理论方法,找到了银纳米颗粒光学透过率的简单函数表达式,能为实验研究提供理论指导. 关键词： 银纳米颗粒 透过率 MIE理论 太阳电池