Multivariate pressure effects on an electron hopping process in ferroelectric KTa<Subscript>1−x</Subscript>Nb<Subscript>x</Subscript>O<Subscript>3</Subscript>

The effect induced by the presence of a polaron related relaxation process on the dielectric properties of a ferroelectric KTa_1?x Nb _x O₃ (KTN) crystal was investigated (10^-2?10⁶ Hz, at 300?375 K) using broadband dielectric spectroscopy. Characterization of the process using just the standard frequency domain dielectric parameters can nonetheless provide penetrating insight into its nature and origins. The three parameters, namely: relaxation time (τ), Cole-Cole loss broadening (α), and dielectric strength (Δ?) provide each one in its own way, much useful and often overlooked information. The Activation Energy along with the Meyer-Neldel dependance, both extracted from τ serve to illuminate the dynamic properties. At the same time, α and especially the combined α(lnτ) relationship, expose the fractal structure of the underlying landscape. Finally, the static parameter Δ?, enables quantification of the dipolar correlations. Hydrostatic pressure (up to 7.5 kbar) was applied to gently perturb the system and observe the outcome on all of the various parameters. This additional degree of freedom allows for a much more comprehensive exploration of the phase space behavior of the system.     

Kinetics of γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticle evolution from an organic precursor

-Fe₂O₃ particles with an average size of 10 nm were prepared by heating the precipitates obtained from a homogeneous solution of stearic acid and hydrated iron (III) nitrate. The compositional and thermal characteristics of the precipitates were studied with the aid of Fourier transform infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC). Presence of -Fe₂O₃ nanoparticles in the heat treated product was established by X-ray diffraction (XRD) investigations. The average particle size was estimated from the XRD patterns by single line profile analysis and directly from transmission electron microscopic (TEM) images. Kinetic analysis of the calorimetric data revealed that nucleation and growth type kinetic law remain operative during the process and the activation energy of the process is 115 kJ/mol.     

Magnetic and magnetoresistive properties of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–Sr<Subscript>2</Subscript>FeMoO<Subscript>6–δ</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoheterostructures

A method has been developed for fabricating nanoporous matrices based on anodic aluminum oxide for the deposition of ferromagnetic nanoparticles in them. The modes of deposition of strontium ferromolybdate thin films prepared by the ion-plasma method have been worked out, and the magnetic and magnetoresistive properties, structure, and composition of the films have been investigated. It has been revealed that the microstructure and properties of the strontium ferromolybdate films deposited by ionplasma sputtering depend on the deposition rate and the temperature of the substrate. Based on the measurement of the electrical resistivity of nanoheterostructures in a magnetic field, it has been found that the magnetoresistance reaches 14% at T = 15 K and B = 8 T, which is due to the manifestation of tunneling magnetoresistance.     

On the bistable behavior of a low-frequency Raman-active phonon line in superconducting oxide Ba<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>K<Subscript>x</Subscript>BiO<Subscript>3</Subscript>

The two-loop temperature hysteresis of integrated intensity of Raman scattering of light is explained theoretically for a line of frequency 50 cm^?1 in a superconducting oxide Ba_1?xK_xBiO₃ single crystal.     

Microwave characterization of Pb<Subscript>1−x</Subscript>Ca<Subscript>x</Subscript>Fe<Subscript>0.5</Subscript>Nb<Subscript>0.5</Subscript>O<Subscript>3</Subscript> multiferroics at X-band

The microwave characteristics of Pb_1?x Ca _x Fe_0.5Nb_0.5O₃ multiferroics (x = 0.0, 0.4, 0.45, 0.5, 0.55, 0.6), have been investigated as a function of frequency and substitution. The results depict ?13.99 dB reflection loss at 11.65 GHz in composition x = 0.6. Microwave absorption is enhanced with substitution of Ca²⁺ ions and undoped composition 0.0 behaves as electromagnetic shield. The model governing microwave absorption is discussed and different compositions for electromagnetic applications have been suggested.     

Cluster spin glass and superparamagnetism in RuSr<Subscript>2</Subscript>Eu<Subscript>1.5</Subscript>Ce<Subscript>0.5</Subscript>Cu<Subscript>2</Subscript>O<Subscript>10-</Subscript><Subscript>δ</Subscript>

We investigate in detail the dc magnetization and nonlinear ac susceptibility behavior of the superconducting ferromagnet RuSr₂Eu_1.5Ce_0.5Cu₂O_{10- δ} (Ru1222) to develop a comprehensive understanding of the spin glass and superparamagnetism in this material. The structural properties of the system result in the formation of magnetic (ferromagnetic) clusters of different sizes, shapes and properties. The magnetic clustering of the system leads to observation of various features in dc magnetization and ac susceptibility consistent with superparamagnetism and cluster spin glass states, which can coexist or stand alone, depending on the temperature range considered. Experimental results of magnetic measurements in combination with their analysis have enabled us to explain and distinguish these phenomena, as well as to propose a temperature dependent scenario of the system behavior.     

Internal friction and magnetoelectric response in two-layer composites Tb<Subscript>0.12</Subscript>Dy<Subscript>0.2</Subscript>Fe<Subscript>0.68</Subscript>–PbZr<Subscript>0.53</Subscript>Ti<Subscript>0.47</Subscript>O<Subscript>3</Subscript>

The inverse magnetoelectric effect and internal friction in two-layer composites based on ferromagnetic Tb_0.12Dy_0.2Fe_0.68 and piezoelectric PbZr_0.53Ti_0.47O₃ are studied in an ac electrical field in the frequency range of 52–213 kHz at temperatures of 293 to 400 K. A correlation is found between the internal friction and the efficiency of the inverse magnetoelectric transformation at resonant frequencies.     

μSR study of Eu<Subscript>0.8</Subscript>Ce<Subscript>0.2</Subscript>Mn<Subscript>2</Subscript>O<Subscript>5</Subscript> and EuMn<Subscript>2</Subscript>O<Subscript>5</Subscript> multiferroics

A comparative μSR study of ceramic samples of the EuMn₂O₅ and Eu_0.8Ce_0.2Mn₂O₅ multiferroics is performed in the temperature range from 15 to 300 K. It is found that the Ce doping of the EuMn₂O₅ sample slightly reduces the temperature of the magnetic phase transition from T _N = 45 K for the EuMn₂O₅ sample to T _N = 42.5 K for the Eu_0.8Ce_0.2Mn₂O₅ sample. Below the temperature T _N for both samples, there are two types of localization of a thermalized muon with different temperature dependences of the precession frequency of the magnetic moment of the muon in an internal magnetic field. The higher frequency in both samples refers to the initial antiferromagnetic matrix. The behavior of this frequency in Eu_0.8Ce_0.2Mn₂O₅ follows the Curie–Weiss law with the exponent β = 0.29 ± 0.02, which differs from the value β = 0.39 standard for 3D Heisenberg magnetics and is observed in EuMn₂O₅, because of the strong frustration of the doped sample. The temperature-independent low frequency is due to the presence of Mn³⁺–Mn⁴⁺ ferromagnetic pairs located along the b axis of the antiferromagnetic matrix and in the regions of phase separation, which contain such ion pairs and e _g electrons recharging them. In both samples, polarization losses are the same (about 20%) and are associated with the formation of Mn⁴⁺–Mn⁴⁺ + Mu complexes near Mn³⁺–Mn⁴⁺ ferromagnetic pairs. In the temperature interval from 25 to 45 K, the separation of the Eu_0.8Ce_0.2Mn₂O₅ structure into two fractions where the relaxation rates of polarization of muons differ by an order of magnitude is revealed. This effect is due to a change in the state of regions of phase separation (1D superlattices) at the indicated temperatures. Such effect in EuMn₂O₅ is significantly weaker.     

High-Temperature Heat Capacity of Zn<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript>–Cu<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript> Solid Solutions

Differential scanning calorimetry has been used to study the influence of temperature on the heat capacity of synthesized vanadates Zn₂V₂O₇, (Cu_0.56Zn_1.44)V₂O₇, and (Cu_1.0Zn_1.0)V₂O₇. It is found that dependences C_p = f(T) have extremes. The thermodynamic properties of Zn₂V₂O₇ have been determined.     

Electrical switching in the MoO<Subscript>3</Subscript>–WO<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript> and MoO<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

High field electrical switching on blown films of MoO₃(60%)–P₂O₅(40%), MoO₃(50%)–WO₃(10%)–P₂O₅(40%), and MoO₃(45%)–WO₃(15%)–P₂O₅(40%) having different thicknesses was studied and compared. Switching was observed using two terminal samples. S-type current–voltage characteristic (current-controlled negative resistance—CCNR) with memory was observed in molybdenum–phosphate glasses, but N-type characteristic (voltage-controlled negative resistance—VCNR) with threshold in tungsten–molybdenum–phosphate glasses was observed. The important observation was that with the addition of WO₃ to binary MoO₃–P₂O5 led to a change of I–V characteristic from CCNR with memory to VCNR with threshold. The measurements of density and molar volume showed linear relation between MoO₃ content and density which decreased with the increase of MoO₃ content. The samples’ thickness had no significant effect on threshold voltage. The attained results also indicated that the electrode material had no effect on switching property of devices. The switching behavior of the devices did not show any dependence on the polarity of the applied voltage. In terms of the effect of heat on the switching behavior of molybdenum–phosphate glasses, it was found that threshold voltage decreases with increasing of temperature. Finally, the switching phenomenon was explained by thermal (formation of crystalline filaments) and electronic models.     

Nernst effect of stripe ordering La<Subscript>1.8−x</Subscript>Eu<Subscript>0.2</Subscript>Sr<Subscript>x</Subscript>CuO<Subscript>4</Subscript>

We investigate the transport properties of La_1.8−xEu_0.2Sr_xCuO₄ (x = 0.04, 0.08, 0.125, 0.15, 0.2) with a special focus on the Nernst effect in the normal state. Various anomalous features are present in the data. For x = 0.125 and 0.15 a kink-like anomaly is present in the vicinity of the onset of charge stripe order in the LTT phase, suggestive of enhanced positive quasiparticle Nernst response in the stripe ordered phase. At higher temperature, all doping levels except x = 0.2 exhibit a further kink anomaly in the LTO phase which cannot unambiguously be related to stripe order. Moreover, a direct comparison between the Nernst coefficients of stripe ordering La_1.8−xEu_0.2Sr_xCuO₄ and superconducting La_2−xSr_xCuO₄ at the doping levels x = 0.125 and x = 0.15 reveals only weak differences. Our findings make high demands on any scenario interpreting the Nernst response in hole-doped cuprates.     

Superconducting Phase Diagram of the Yttrium,Barium, and YBa-core in YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7–δ</Subscript> by an Ising Model

We investigate the temperature dependent of magnetizations, hysteresis properties and present the superconducting phase diagrams of the YBa₂Cu₃O_7–δ (YBCO) by an Ising model within the effective-field theory. We obtain the magnetizations of the YBCO and its components (Cu1, Cu2, O1, O2, O3, O4, Ba, Y, CuO-shell, YBa-core, and total YBCO) versus the reduced temperature and external magnetic field. We find that the copper atoms have two different magnetizations (Cu1 and Cu2) and oxygen atoms have four different magnetizations (O1, O2, O3, O4) but yttrium and barium has one magnetization. The differences in the magnetizations of the copper and oxygen atoms result from the lattice location of them on the YBCO lattice. The magnetization of the Cu1 atoms is the lowest and the yttrium is highest than those of the others; hence magnetizations of the YBCO increase from the corner to inner of the orthorhombic YBCO lattice. We also find that the YBa-core, yttrium and barium atoms of the YBCO exhibit superconductivity behaviors. Therefore, Y–Ba core, yttrium and barium atoms have the superconducting phase diagram and it has Meissner, vortex, and normal states. It is also found that the upper critical coercive field (H_c2) and the critical vortex temperature (T_v) of the Ba are high than those of the Y and YBa-core.     

Large electrostrictive strain in lead-free Bi<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript>–BaTiO<Subscript>3</Subscript>–KNbO<Subscript>3</Subscript> ceramics

In the present work, (1−x)(0.935Bi_0.5Na_0.5TiO₃–0.065BaTiO₃)–xKNbO₃ (BNT–BT–KN, BNT–BT–100xKN) ceramics with x ranging from 0 to 0.1 were prepared by the conventional ceramic fabrication process. A large electrostrictive coefficient of ∼10⁻² m⁴ C⁻² is obtained with the composition x ranging from 0.02 to 0.1, which is close to the well-known electrostrictive material Pb(Mg_1/3Nb_2/3)O₃. Under an electric field of 4 kV/mm, the electrostrictive strain can reach as high as 0.08%. Besides, the electric field induced strain behavior indicates a temperature independent behavior within the temperature range of 20 to 150°C. The large electrostrictive strain is suggested to be ascribed to the formation of non-polar (NP) phase developed by the KNbO₃ substitution, and the high electrostrictive coefficient of BNT–BT–KN ceramics makes them great candidates to be applied in the new solid-state actuators.     

Synthesis and characterization of Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>·LiMn<Subscript>0.33</Subscript>Fe<Subscript>0.67</Subscript>PO<Subscript>4</Subscript>/C cathode materials

A new polyanionic cathode material, Li₃V₂(PO₄)₃·LiMn_0.33Fe_0.67PO₄/C for lithium-ion batteries, was synthesized using a sol-gel method and with N,N-dimethyl formamide as a dispersion agent. The analysis of electron transmission spectroscopy and X-ray diffraction revealed that the composite contained two phases. The material has high crystallinity with a grain size of 20–50 nm. The valence states of Mn, V, and Fe in the composite were analyzed by X-ray photoelectron spectroscopy. The electrochemical kinetics in Li₃V₂(PO₄)₃ is effectively enhanced by the incorporation of LiMnPO₄ and LiFePO₄, via structure modification and reduced Li diffusion length. The Li₃V₂(PO₄)₃·LiMn_0.33Fe_0.67PO₄/C materials displayed high rate capacity and steady cycle performance with discharge capacity remained 148 mAh g^?1 after 50 cycles at the rate of 0.2C. In particular, the composite exhibited excellent reversible capacities, with the values of 157, 134, 120, 102, and 94 mAh g^?1 at charge/discharge 0.2, 0.5, 1, 2, and 5C rates, respectively.     

Elastic properties of TeO<Subscript>2</Subscript>–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–Ag<Subscript>2</Subscript>O glasses

A series of glasses [(TeO₂) _x (B₂O₃)_1−x ]_1−y [Ag₂O] _y with x = 70 and y = 10, 15, 20, 25 and 30 mol% were synthesised by rapid quenching. Longitudinal and shear ultrasonic velocity were measured at room temperature and at 5 MHz frequency. Elastic properties, Poisson's ratio, microhardness, softening temperature and Debye temperature have been calculated from the measured density and ultrasonic velocity at room temperature. The experimental results indicate that the elastic constants depend upon the composition of the glasses and the role of the Ag₂O inside the glass network is discussed. Estimated parameters based on Makishima–Mackenzie theory and bond compression model were calculated in order to analyse the experimental elastic moduli. Comparison between the experimental elastic moduli data obtained in the study and the calculated theoretically by the mentioned above models has been discussed.     

Investigation of quasicrystalline Al<Subscript>62.5</Subscript>Cu<Subscript>25</Subscript>Fe<Subscript>12.5</Subscript> and crystalline β-Al<Subscript>50</Subscript>Cu<Subscript>33</Subscript>Fe<Subscript>17</Subscript> alloys by X-ray photoelectron spectroscopy

The electronic spectra of the valence band and core levels of the surface of polygrain alloys with the icosahedral structure and the β-(CsCl)-type solid solution of Al₅₀Cu₃₃Fe₁₇ were investigated by X-ray photoelectron spectroscopy (XPS). The obtained XPS spectra of the Al_62.5Cu₂₅Fe_12.5 alloy, in comparison with those of the crystalline Al₅₀Cu₃₃Fe₁₇ alloy demonstrate narrowing and a decrease in asymmetry of the Fe2p core level and a decrease in the electron state density N(E _F ) near the Fermi level, features expected for the poorly conducting icosahedral phase. The XPS data are compared with the estimates of N(E _F ) based on the low-temperature specific heat measurements.     

Current dependent reorganization in superconducting Y<Subscript>1</Subscript>Ba<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7-δ</Subscript>

We present strong non-linear dynamic responses developing due to magnitude and type of driving current in bulk polycrystalline superconducting Y₁Ba₂Cu₃O_7-δ sample at zero magnetic field. Several novel types of dynamic changes induced by the transport current were observed via the time evolution of the voltage (V - t curves). The physical observations appearing in V - t curves were interpreted mainly with the reorganization of driving current in a multiply connected network of weak-link structure. It was found that such a dynamic process could cause an enhancement or suppression in superconducting order parameter due to the magnitude of the driving current and coupling strength of weak link structure together with the chemical and anisotropic states of the sample. It was shown that the general behavior of decays evolving in V - t curves is consistent with an exponential relation which is analogous to the glassy state relaxation.     

Current-induced voltage oscillations in superconducting Y<Subscript>1</Subscript>Ba<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7-δ</Subscript>

We investigated influence of bidirectional square wave current with long periods and dc current on the evolution of the voltage-time (V - t) curves in superconducting polycrystalline bulk Y₁Ba₂Cu₃O_7-δ (YBCO) material at the temperatures near the critical temperature. In a well-defined range of amplitudes and periods of driving current, and temperatures, novel type of non-linear dynamic responses was observed by means of the V-t curves. It was seen that such a non-linear response to bidirectional square wave current sometimes reflects itself as regular sinusoidal-like voltage oscillations. The sinusoidal-like and non-sinusoidal oscillations were discussed mainly in terms of the dynamic competition between pinning and depinning and significant relaxation effects which appear in this competing process. The density fluctuations associated with the current induced self-magnetic flux (SMF) lines and semi-elastic coupling of SMF lines with the pinning centers were also considered as possible physical mechanisms in the interpretation of the experimental results.     

Preparation,structure and properties of La<Subscript>0.67</Subscript>Pb<Subscript>0.33</Subscript>(Mn<Subscript>1-x</Subscript>Co<Subscript>x</Subscript>)O<Subscript>3-δ</Subscript>

La_0.67Pb_0.33(Mn_1-xCo_x)O_3-δ ceramics with x=0, 0.01, 0.03, 0.06, 0.1 and 0.15 have been prepared in a two-step procedure. Precursor gels were made by the wet chemical malic acid method. The gels were calcined and then converted into ceramics by heat treatment at 950 °C and 1000 °C in air. X-ray diffraction showed that the compounds were phase pure. The crystal structure symmetry of the compounds was confirmed to be rhombohedral (space group R3̄c) for the whole investigated range of x. All compounds undergo a paramagnetic–ferromagnetic phase transition between 335 K and 225 K. The basic magnetic characteristics such as the Curie temperature , the paramagnetic Curie temperature θ, the effective magnetic moment and the saturated magnetization decrease with increasing Co doping. The ferromagnetic transition is accompanied by an anomaly in the electrical resistance for all compounds. The high-temperature insulator–metal transitions () do not coincide with the relevant . A large magnetoresistance peak of about 15% was observed for all compounds at . PACS 72.80.Ga; 75.47.Lx; 75.60.Ej