Suppression of acoustic noise in the measurements of wall pressure fluctuations

It is shown that, in hydrodynamic noise measurements in the presence of acoustic noise acting upon the pressure fluctuation receiver, spatial filtering methods should provide the best results. Active methods are developed for suppressing the acoustic noise that affects a miniature receiver in the course of turbulent pressure fluctuation measurements. The methods are based on complicating the structure of the measuring transducer by introducing an extra compensating sensing element whose characteristics are identical with those of the main sensing element. The spatial filtering of small-scale turbulent pressure fluctuations by a finite-size electroacoustic transducer is used as the basis for the development of noise-compensated measuring systems, as well as methods of measuring the turbulent pressure fluctuations by receivers with noise compensation. A numerical study of the wave-number filtering of acoustic noise in wall pressure measurements by a noise-compensated receiver is performed.     

基于纹影法的聚焦超声声场重建算法研究

为了从聚焦超声声场纹影图像直接重建声场声压分布图像,首先根据水中声波与光波的作用规律,利用Zernike相衬技术得到纹影系统中空间声压分布与纹影图像中光强的关系,再通过纹影系统获得聚焦超声声场实时图像,最后根据纹影系统的物理特性经过反投影重建算法重建出凹球壳聚焦超声换能器的空间声压分布。分析可知,理论声焦域横向与声轴大小分别为0.15 mm、1.4 mm,重建声场电功率为12 W时横向最接近为0.25 mm,30 W时声轴最接近为1.35 mm。与球壳换能器的理论声压分布进行对比的结果表明,该方法具有一定可行性,可以用于聚焦超声换能器的声场分布检测。     

A continuous-wave ultrasound system for displacement amplitude and phase measurement

A noninvasive, continuous-wave ultrasonic technique was developed to measure the displacement amplitude and phase of mechanical structures. The measurement system was based on a method developed by Rogers and Hastings ["Noninvasive vibration measurement system and method for measuring amplitude of vibration of tissue in an object being investigated," U.S. Patent No. 4,819,643 (1989)] and expanded to include phase measurement. A low-frequency sound source was used to generate harmonic vibrations in a target of interest. The target was simultaneously insonified by a low-power, continuous-wave ultrasonic source. Reflected ultrasound was phase modulated by the target motion and detected with a separate ultrasonic transducer. The target displacement amplitude was obtained directly from the received ultrasound frequency spectrum by comparing the carrier and sideband amplitudes. Phase information was obtained by demodulating the received signal using a double-balanced mixer and low-pass filter. A theoretical model for the ultrasonic receiver field is also presented. This model coupled existing models for focused piston radiators and for pulse-echo ultrasonic fields. Experimental measurements of the resulting receiver fields compared favorably with theoretical predictions.     

Orientation phenomena in nematic liquid crystals under a periodic compressional deformation

The orientation behavior of homogeneous planar layers of nematic liquid crystals with open and closed ends in the field of compressional deformations caused by an acoustic effect is studied. The mechanisms determining the connection of the optical response of a nematic liquid crystal (the variable component of an optical signal and its spectrum) with the acoustic parameters (the oscillation amplitude and frequency, and the amplitude of sound pressure) and the layer thickness are revealed. The factors responsible for the mechanism and modes of acoustooptic conversion are considered. It is demonstrated that, by varying the layer thickness, it is possible to implement different modes of signal conversion. The possibility of designing a new modification of a sound receiver based on a nematic liquid crystal and the specific features of this design are discussed. Its advantages over conventional sound pressure receivers based on nematic liquid crystals are indicated, in particular, the absence of limitation of the frequency of the received signal in the low-frequency range.     

液体材料超声处理过程中声场和流场的分布规律研究

针对合金熔体等液体材料的超声处理过程,选取水作为透明模型材料,采用数值模拟计算和示踪粒子实验方法,研究了20和490 kHz两种频率超声作用下水中的声场和流场分布.结果表明,增大变幅杆半径能够提高水中声压水平,扩大空化效应的发生区域.当超声频率为20 kHz时,水中声压最大值出现在超声变幅杆下端面处,且声压沿传播距离的增大而显著减小.如果超声频率增加至490 kHz,水中的声压级相比于20 kHz时明显提高,且声压沿着超声传播方向呈现出周期性振荡特征.两种频率超声作用下水中的流场呈现相似的分布特征,且平均流速均随着变幅杆半径增大表现出先升高后降低的趋势.变幅杆半径相同时,20 kHz频率超声作用下水中的平均流速高于490 kHz频率超声.采用示踪粒子图像测速技术实时观察和测定了水中的流速分布,发现其与计算结果基本一致.     

Experimental studies of flow noise around a surfacing device

The wall pressure fluctuations in turbulent boundary layers play an important role in acoustic measurements carried out in moving media. Results of measuring the frequency spectra of wall pressure fluctuations around a surfacing device are presented. The spatial resolution achieved in measuring the wall pressure fluctuations is investigated. It is demonstrated that the results of hydrodynamic flow noise measurements strongly depend on the aperture size of the measuring acoustic transducer and its orientation in the turbulent boundary layer. The pseudosound pressure fluctuation spectra observed in a series of experiments with surfacing devices show that the resolution of the pressure receivers operating in the turbulent boundary layers considerably varies. On the basis of systematic measurements of wall pressure fluctuations by miniature and distributed receivers at high Reynolds numbers, the effect of the geometric dimensions of a pressure receiver on its resolution in the flow noise measurements is studied. An experimental method is proposed for estimating the receiver-induced distortions.     

功率超声珩磨磨削区空化声场的建模与仿真研究

通过建立Φ47功率超声珩磨磨削区流体-结构耦合声场的理论模型,采用ANSYS有限元分析软件对磨削区的空化声场进行了仿真分析,得出磨削区二维、三维空化声场的分布情况和声压幅值,并利用超声波功率测量仪对磨削区的空化声场进行模拟实验测量。结果表明:在谐振频率18.6 kHz下,声场主要集中在油石的中部,二维和三维声场的声压最大值分别为1.39 MPa和1.47 MPa,与实验测得声压最大值1.3 MPa在同一个数量级,为进一步研究功率超声珩磨空化效应提供理论和实验的基础。      

Observationally constrained modeling of sound in curved ocean internal waves: examination of deep ducting and surface ducting at short range

A study of 400 Hz sound focusing and ducting effects in a packet of curved nonlinear internal waves in shallow water is presented. Sound propagation roughly along the crests of the waves is simulated with a three-dimensional parabolic equation computational code, and the results are compared to measured propagation along fixed 3 and 6 km source/receiver paths. The measurements were made on the shelf of the South China Sea northeast of Tung-Sha Island. Construction of the time-varying three-dimensional sound-speed fields used in the modeling simulations was guided by environmental data collected concurrently with the acoustic data. Computed three-dimensional propagation results compare well with field observations. The simulations allow identification of time-dependent sound forward scattering and ducting processes within the curved internal gravity waves. Strong acoustic intensity enhancement was observed during passage of high-amplitude nonlinear waves over the source/receiver paths, and is replicated in the model. The waves were typical of the region (35 m vertical displacement). Two types of ducting are found in the model, which occur asynchronously. One type is three-dimensional modal trapping in deep ducts within the wave crests (shallow thermocline zones). The second type is surface ducting within the wave troughs (deep thermocline zones).     

Geometry of locating sounds from differences in travel time: isodiachrons

Calling animals may be located from measurements of the differences in acoustic travel time at pairs of receivers. For inhomogeneous fields of speed, locations can be made with better accuracy when the location algorithm allows the speed to vary from path to path. A new geometrical shape, called an isodiachron, is described. It is the locus of points corresponding to a constant difference in travel time along straight paths between the animal and two receivers. Its properties allow an interpretation for locations when the speed differs from path to path. An algorithm has been developed for finding the location of calling animals by intersecting isodiachrons from data collected at pairs of receivers. When the sound speed field is spatially homogeneous, isodiachrons become hyperboloids. Unlike a hyperboloid that extends to infinity, an isodiachron is confined to a finite region of space when the speeds differ between the animal and each of two receivers. Its shape is significantly different than a hyperboloid for cases of practical interest. Isodiachrons can be used to better understand locations of calling animals and other sounds in the sea, Earth, and air.     

复频聚焦超声换能器水中焦区商场特性的研究

本文对新研制的一种复频聚焦超声换能器的辐射声场进行了实验研究,测定了辐射压在轴向上的分布曲线,进而确定了焦区位置,这与理论所得结果符合较好,测定了辐射声压在焦平面上的分布曲线,并对焦区声场进行了定位,最后对换能器在水中焦区辐射声的频谱进行了研究,不仅观测到了两个源波,而且还观测到了和频波,差频波以及倍频波,证实了声散射声效应的存在。     

Dynamic Superposition and Levitation Capability of Two Confronting Ultrasonic Waves

The superposition dynamics of two confronting ultrasonic waves and their levitation capability for centimeter-sized thin disks are investigated by numerical analyses and validated by experiments. The sound pressure simulation reveals that two opposite ultrasonic waves provide a more effective standing-wave field than a single ultrasonic wave when the diameter of disk-shaped object approaches the wavelength scale. The dynamic superposition of two confronting beams facilitates the acoustic levitation of the clay disk and aluminum disk with diameters of 0.97 and 0.90. The acoustic radiation forces exerting on these thin disks are measured experimentally, which exhibit a better levitation stability for the centimeter-sized thin disks. The equilibrium levitation positions of the two disks are located near the sound pressure node, and the maximum acoustic radiation pressure on their surfaces is less than one percent of the maximum sound pressure.     

An Interferometric Method for Detecting a Moving Sound Source with a Vector-Scalar Receiver

The paper discusses the conditions imposed on the spectrum of an emitted signal for which the interferometric method of detecting a moving sound source in shallow water is applicable for vector-scalar receivers. It is shown that a normalized spectrogram representing a two-dimensional Fourier transform of the interferometric pattern is identical for all four acoustic field components and combinations thereof. Results of a field experiment in which a vector-scalar receiver was applied are presented. The interference immunity of the method is considered for different field components in the case of isotropic interference.     

Whole field measurements of acousto-optic refraction

A new effect of acousto-optic refraction has been detected. The effect is observed in optical images of sound fields and has the appearance of bright fringes in the images. The fringes are shown to identify contours of equal refraction angle. Since the angle of optical refraction induced by a sound field is—under certain conditions—proportional to the spatial gradient or slope of the acoustic pressure, the name “iso-slope fringes” is applied. This new effect can be used to make optical whole field measurements of sound fields with significantly better spatial resolution than is possible with current measurement methods. The new effect may be of particular interest to investigators analyzing non-linear acoustic propagation phenomena.     

Modeling of Processing Algorithms for Processes at the Output of a Combined Receiver and Combined Array Channels

Using a computer-based simulation method, we consider the noise immunity of an individual combined receiver consisting of sound pressure and vibration velocity receivers, as well as the noise immunity of a plane acoustically transparent array consisting of such receivers, are considered. The computer simulation results verify the earlier developed analytic method of calculating the noise immunity coefficient of hydroacoustic arrays for the multiplicative processing algorithm for processes in their channels. It is shown that if the anisotropy of the noise field acting on the combined receiver and array varies in a very wide range, the maximum noise immunity is ensured not by multiplicative but by additive processing.     

Ultrasonic sensor properties characterized by a PC-controlled scanning measuring system

The use of ultrasonic sensors for process control is currently widespread for flow, level or distance measurements. Recently, interest has increased, too in the application of ultrasonic sensors to concentration measurements in complex liquids. In this application there are high demands for a defined and stable quality of the properties of both the sensor transfer function and the sound field characteristic. For a detailed investigation and characterization of ultrasonic sensor propertiess, an efficient PC-controlled measuring system was developed by the Institut fur Automation und Kommunikation (IFAK). In this contribution, this high performance approach is presented to make visible the vibrating ultrasonic sensor surface as well as the sound field in front of acoustic sensors in liquids.     

Complex calibration of a pressure gradient receiver using the reciprocity method procedure

Absolute complex free-field calibration of a pressure gradient receiver is considered. The calibration is carried out in a reflecting water tank using the reciprocity method procedure during radiation of continuous signals with linear free-field frequency modulation. To obtain the free-field frequency dependences, complex moving weighted averaging is used. It is shown that this method, developed for calibration of sound pressure receivers, allows effective recovery and measurement of the vector component of a direct acoustic wave in the presence of reflections. The method makes it possible to measure the modulus and phase angle of the complex sensitivity and reveal the insufficiencies of an experimental pressure gradient receiver.     

一种考虑声线弯曲的温度场重建算法

声波在非均匀温度场中传播时会由于声波的折射而产生声线弯曲现象。为提高非均匀温度场声学CT (Computer Tomography)重建精度,提出一种考虑声线弯曲的重建算法。首先用最小二乘法获得一个不考虑声线弯曲的重建温度场,然后用打靶-插值法确定本征声线出射角,用三角形前向展开法追踪声线,获得此温度场中声波发射/接收器间的本征声线,建立本征声线上声波传播时间与温度分布间的关系,进而实现考虑声线弯曲的最小二乘法温度场重建。单峰、双峰温度场仿真重建结果表明:所采用的本征声线追踪法计算简单运行速度快;考虑声线弯曲后,可明显提高温度场重建精度。因此所提重建算法能更好地适应实际温度场重建需求。      

Detecting pipe changes via acoustic matched field processing

Detecting pipe irregularities such as intrusions can be challenging. However, subtle changes can be identified in the complex acoustic fields measured over a range of frequencies and over a time interval given an “array” of receivers. In particular, for two receivers one can coherently process the signals via matched field processing (MFP) to infer whether or not there have been changes such as new intrusions relative to undisturbed fields measured earlier. There is no acoustic modelling of the fields required, only the simple linear processor is applied, and only test data (five scenarios) are used in this demonstration. A key advantage to using MFP plus two (or more) microphones is that absolute sound levels need not be carefully measured.     

Estimation of the detection range of a hydroacoustic system based on the acoustic power flux receiver

Approaches to estimating the detection range of systems based on vector receivers are considered. The approaches rely on a detailed analysis of the process of signal’s acoustic power flux formation in the presence of ambient sea noise and uncover the signal information parameters at the receiver output that provide the required statistically confident range of weak signal detection under these conditions. Based on the sonar equations and the known fundamental relationships between the outputs of a pressure receiver and a vector receiver for signal and noise, estimates of the maximum possible gain in the detection range of an acoustic power flux receiver are considered as a function of anisotropy of the ambient noise field in the area.     

Nonlinear oscillation and acoustic scattering of bubbles

The scattered acoustic pressure and scattered cross section of bubbles is studied using the scattered theory of bubbles. The nonlinear oscillations of bubbles and the scattering acoustic fields of a spherical bubble cluster are numerically simulated based on the bubble dynamic and fluid dynamic. The influences of the interaction between bubbles on scattering acoustic field of bubbles are researched. The results of numerical simulation show that the oscillation phases of bubbles are delayed to a certain extent at different positions in the bubble cluster, but the radii of bubbles during oscillation do not differ too much at different positions. Furthermore, directivity of the acoustic scattering of bubbles is obvious. The scattered acoustic pressures of bubbles are different at the different positions inside and outside of the bubble cluster. The scattering acoustic fields of a spherical bubble cluster depend on the driving pressure amplitude, driving frequency, the equilibrium radii of bubbles, bubble number and the radius of the spherical bubble cluster. These theoretical predictions provide a further understanding of physics behind ultrasonic technique and should be useful for guiding ultrasonic application.