Mo-X(B, C, N, O, F)共掺杂TiO2体系的光催化协同效应研究

采用密度泛函理论平面波超软赝势方法, 计算并分析了Mo/X(B, C, N, O, F)共掺杂TiO₂体系的形成能、电子结构和光学性质, 研究了共掺杂协同效应对于计算体系光催化性能的影响机制. 首先计算出不同掺杂体系的态密度及能带结构, 利用能带理论分析了共掺杂效应对于禁带宽度的调控作用, 进而分析了共掺杂对TiO₂光催化能力和稳定性的协同作用. 结合电荷密度图, 分析原子间的电荷转移情况, 得到计算体系中各原子成键状态. 最后, 结合光吸收谱线分析得出Mo/C共掺杂类型在调制TiO₂体系中可见光波段的光催化性能上优势明显, 在催化作用上表现出协同效应. 本文的理论研究对共掺杂方法在TiO₂光催化领域有着一定的指导意义.     

Passivated B-O,B-S codoping to improve the photocatalytic efficiency in C2N monolayer: First-principles study

In this paper, we explored systematically the effects of non-metal elements (B, O, and S) monodoping and passivated codoping of B-S and B-O in C₂N monolayer. The band structure, band edge position and charge density distribution of doped-C₂N are investigated. Our results show that the monodoping of B, O, S introduce flat impurity bands around the Fermi level. The passivated codoping of B-O or B-S can effectively decrease the bandgap, and the band edge position is more favorable for water splitting compared with that of C₂N monolayer. A large dispersion of conduction and valance band can be observed for B-S or B-O codoping, which is beneficial for the carriers' mobility. Moreover, the separation of electron and hole density to extend after doping can decrease the combination rate in photocatalytic. Our results predict that passivated B-S or B-O doped C₂N are promising water-splitting photocatalyst.     

N,Co共掺杂锐钛矿相YiO2光催化剂的第一性原理研究

采用第一性原理平面波超软赝势方法研究了N,Co共掺杂锐钛矿相TiO2的微观结构和光学性质.结果表明:N,Co共掺杂后TiO2晶格中产生的偶极矩使光生电子-空穴对更有效地分离;在TiO2导带和价带之间形成了新的杂质能级,一方面使吸收带边红移到可见光区,光吸收性能明显增强,另一方面有利于光生电子-空穴对的分离,提高TiO2的光量子效率;与纯TiO2相比,N,Co共掺杂锐钛矿相TiO2带边的氧化还原势只有微小的变化,共掺杂后TiO2的强氧化还原能力得以保持.     

Mn,N共掺杂对锐钛矿相TiO2微观结构和性能的影响

采用第一性原理平面波超软赝势方法,系统研究了Mn,N共掺杂对锐钛矿相TiO₂的晶体结构、缺陷形成能、电子结构、光学性质以及氧化还原能力的影响.研究表明:Mn,N共掺杂锐钛矿相TiO₂后,TiO₂晶格发生了畸变,导致晶体八面体偶极矩增加,有利于光生电子-空穴对的有效分离;在TiO₂带隙中出现了杂质能级,使锐钛矿相TiO₂的光学吸收带边红移,可见光区的吸收系数明显增大,有利于光催化效率的提高;在不考虑 关键词： 2')" href="#">锐钛矿相TiO₂ 第一性原理 Mn和N共掺杂 光催化性能     

Photocatalytic ability of Bi<Subscript>6</Subscript>Ti<Subscript>3</Subscript>WO<Subscript>18</Subscript> nanoparticles with a mix-layered Aurivillius structure

Aurivillius phase layered perovskites Bi₆Ti₃WO₁₈ was prepared by the sol-gel citrate-complexation synthesis. The sample developed into the plate-like nanoparticles with the exposed (001) facets. The phase formation and structure have been verified via X-ray polycrystalline powder diffraction (XRD) Rietveld refinements. The nanoparticles were investigated via the measurements such as FE-SEM, TEM, EDS, and the surface analyses. UV–Vis absorption data revealed that the Aurivillius compound has a direct band characteristic with the band energy of 2.214 eV. The band structure of Bi₆Ti₃WO₁₈ nanoparticles was discussed on the base of the experiments and theoretical calculation. Bi³⁺-containing Aurivillius Bi₆Ti₃WO₁₈ shows efficient photocatalytic degradation for rhodamine B dye (RhB) with the visible light irradiation (λ?>?420 nm). Dynamic characteristic of the light-created excitons was measured by the luminescence and decay lifetime. The multivalent properties of W and Ti ions in the Aurivillius-like lattices of Bi₆Ti₃WO₁₈ photocatalyst were discussed.     

Cu-X(X=B, Al, Ga, In)共掺杂对ZnS可见光吸收的影响

ZnS能够用于光解水制氢,但是由于ZnS带隙较宽在一定程度上制约了可见光的吸收。为了减小闪锌矿ZnS的带隙宽度,增加对可见光的吸收,采用密度泛函理论研究了Cu-X(X=B, Al, Ga, In)共掺杂对ZnS电子结构和可见光吸收的影响。计算结果表明Cu-X(X=B, Al, Ga, In)共掺杂ZnS的结合能都是负值,都属于稳定结构;掺杂使得闪锌矿ZnS的带隙宽度由2.9eV分别减小到2.68eV、2.41 eV、2.18 eV、1.82 eV,导致了吸收谱和光导产生红移,有利于可见光的吸收;掺杂后导带底向低能级方向移动,同时在禁带中产生p-d杂化能级,导致了带隙宽度减小,有利于可见光的吸收和阻止光生载流子的复合;最后掺杂ZnS的带边位置满足水解制氢的条件,可用于制造光催化剂。综上所述Cu-X(X=B, Al, Ga, In)共掺杂ZnS有利于可见光的吸收。     

Bifunctional photocatalysis of TiO2/Cu2O composite under visible light: Ti in organic pollutant degradation and water splitting

Photocatalytic experiment results under visible light demonstrate that both TiO₂ and Cu₂O have low activity for brilliant red X-3B degradation and neither can produce H₂ from water splitting. In comparison, TiO₂/Cu₂O composite can do the both efficiently. Further investigation shows that the formation of Ti³⁺ under visible light has great contribution. The mechanism of photocatalytic reaction is proposed based on energy band theory and experimental results. The photogenerated electrons from Cu₂O were captured by Ti⁴⁺ ions in TiO₂ and Ti⁴⁺ ions were further reduced to Ti³⁺ ions. Thus, the photogenerated electrons were stored in Ti³⁺ ions as the form of energy. These electrons trapped in Ti³⁺ can be released if a suitable electron acceptor is present. So, the electrons can be transferred to the interface between the composite and solution to participate in photocatalytic reaction. XPS spectra of TiO₂/Cu₂O composite before and after visible light irradiation were carried out and provided evidence for the presence of Ti³⁺. The image of high-resolution transmission electron microscopy demonstrates that TiO₂ combines with Cu₂O tightly. So, the photogenerated electrons can be transferred from Cu₂O to TiO₂.     

The WO3/WS2 nanostructures: Preparation,characterization and optical absorption properties

The WO₃/WS₂ nanostructures were successfully prepared using a two-step hydrothermal/gas phase method. The physical properties of the nanostructures were characterized using XRD, SEM, TEM, UV–visible spectroscopy. The WO₃/WS₂ nanostructures obtained were coexistence of WO₃ and WS₂ in the same particle. The WO₃/WS₂ nanostructures contained a wide and intensive absorption in the UV–visible light region of 245–750 nm, which showed that the WO₃/WS₂ nanostructures may have a potential application as an UV–visible photocatalyst.     

Visible light absorption of (Fe,C/N) co-doped NaTaO_3: DFT+U

The effects of Fe–C/N co-doping on the electronic and optical properties of NaTaO_3 are studied with density functional theory. Our calculations indicate that mono-doped and co-doped sodium tantalate are both thermodynamically stable.The co-doping sodium tantalate can reduce the energy band gap to a greater degree due to the synergistic effects of Fe and C(N) atoms than mono-doping sodium tantalate, and has a larger optical absorption of the whole visible spectrum. The band alignments for the doped NaTaO_3 are well positioned for the feasibility of hydrogen production by water splitting. The Fe–C co-doping can enhance the absorption of the visible light and its photocatalytic activity more than Fe–N co-doping due to the different locations of impurity energy levels originating from their p–d hybridization effect.     

Soft X-ray spectroscopic study on the electronic structure of WO3 thin films fabricated under various annealing temperature and gas flow conditions

The electrical properties of WO₃ thin films vary significantly depending on the growth conditions. In this work, the influence of O₂ gas on the band gap of WO₃ thin films during growth was investigated via electronic structure characterization using X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), and X-ray emission spectroscopy (XES). A substantial decrease in the electrical conductivity of the WO₃ films was observed with an increase in the O₂ partial pressure during growth. Spectral differences in the peak energy and intensity were apparent for WO₃ films grown under only Ar and those grown in Ar:O₂. It is difficult to explain the acquired spectrum of WO₃ with oxygen defects through the rigid-band model in terms of the simple addition of electrons to the conduction band of WO₃. Our results show that an oxygen deficiency in WO₃ moves the conduction band to the Fermi edge.     

金属和非金属共掺杂锐钛矿相TiO2的第一性原理计算

本文运用第一性原理的计算方法, 以C/TM和N/TM共掺杂(碳与过渡金属共掺杂和氮与过渡金属共掺杂)TiO₂为例, 分别计算了它们共掺杂TiO₂的束缚能、能带结构和态密度等, 通过对双掺杂结构的束缚能计算, 发现非金属和金属杂质有团聚成键的趋势, 其正的束缚能说明了掺杂原子与周围的原子成键, 因成键作用减少的体系能量高于因几何畸变带来的应力能. 在对N/V和C/Cr共掺杂能带结构和分子成键的详细分析中, 发现非金属和金属共掺杂TiO₂, 要使掺杂后TiO₂的光吸收边红移较大, 光催化性能较好, 就要符合金属和非金属共掺杂协同机制, 即 掺杂后在导带底下方和价带顶上方分别出现由金属3d和非金属2p态提供的杂质能级.     

Structural,electronic and optical properties of Ca3Bi2: First-principles investigation

In this work by applying first principles calculations structural, electronic and optical properties of Ca₃Bi₂ compound in hexagonal and cubic phases are studied within the framework of the density functional theory using the full potential linearized augmented plane wave (FP-LAPW) approach. According to our study band gap for Ca₃Bi₂ in hexagonal phase are 0.47, 0.96 and 1?eV within the PBE-GGA, EV-GGA and mBJ-GGA, respectively. The corresponding values for cubic phase are 1.24, 2.08 and 2.14?eV, respectively. The effects of hydrostatic pressure on the behavior of the electronic properties such as band gap, valence bandwidths and anti-symmetry gap are investigated. It is found that the hydrostatic pressure increases the band widths of all bands below the Fermi energy while it decreases the band gap and the anti-symmetry gap. In our calculations, the dielectric tensor is derived within the random phase approximation (RPA). The first absorption peak in imaginary part of dielectric function for both phases is located in the energy range 2.0–2.5?eV which are beneficial to practical applications in optoelectronic devices in the visible spectral range. For instance, hexagonal phase of Ca₃Bi₂ with a band gap around 1?eV can be applied for photovoltaic application and cubic phase with a band gap of 2?eV can be used for water splitting application. Moreover, we found the optical spectra of hexagonal phase are anisotropic along E||x and E||z.     

Investigations on spectral features of tungsten ions in sodium lead alumino borate glass system

Na₂O–PbO–Al₂O₃–B₂O₃ (NPAB) glasses mixed with different concentrations of WO₃ (ranging from 0 to 2.5 mol%) are synthesized by conventional melt quenching method. The samples are characterized by X-ray diffraction (XRD), optical absorption, Electron paramagnetic resonance (EPR) and Fourier transform infrared (FT-IR) spectroscopic techniques. Glass formation is confirmed by X-ray diffraction spectra. The optical absorption spectra of these glasses exhibited a predominant broad band peak at about 850–870 nm is identified due to d_xy–d_x²_−y² transition of W⁵⁺ ions. From the optical absorption spectral data, optical band gap (E_opt) and Urbach energy (ΔE) are evaluated. From EPR spectra the strength of the signal is increased and hyperfine splitting is resolved with increasing concentration of WO₃ in the glass matrix. The FT-IR spectral studies have pointed out the existence of conventional BO₃, BO₄, B–O–B, PbO₄, WO₄ and WO₆ structural units of these glasses. Various physical properties and optical basicity are also evaluated with respect to the concentration of WO₃ ions.     

Control of optical absorption edge of TiO2 through co-doped acceptors: The chemical trend

Tuning the optical adsorption edge of TiO₂ is attracting increasing attention as a potential solution to the worldwide energy shortage. A possible strategy to achieve high efficiency photocatalysis with TiO₂ is through dopants to modulate chemical composition. Based on first-principles calculations, we propose a hole-strain-mediated coupling mechanism between co-doped acceptors in anatase TiO₂. When the dopant complex on neighboring oxygen sites contains a large radius atom, and the doped system has at least one net hole, the dopants will strongly couple to form a pair through the local lattice strain induced by the large dopant. The coupling results in bandgap narrowing due to the appearance of the fully occupied mid-gap states, leading to a much more effective band gap reduction than that induced by mono-doping or conventional donor–acceptor codoping. The calculated absorption spectra show that acceptor–acceptor codopings could shift the absorption edge to the visible light region.     

等价阴-阳离子共掺杂调节ZnO的能带结构及其光催化活性

采用等价阴-阳离子共掺的方法调节ZnO的能带结构,提高其光催化分解水制氢的效率。计算结果表明：等价阴-阳离子共掺不仅减小了ZnO的带隙,使其在可见光区域的光吸收增强,而且能有效抑制电子-空穴的复合,提高载流子迁移率。（Cd+Te）共掺杂的ZnO是较理想的水分解的光催化剂,因为它具有合适的带隙、较少的电子-空穴复合中心、增强的可见光区域的光吸收和与水氧化还原势相匹配的带边位置。等价阴-阳离子共掺的方法也可运用到其它宽带隙的半导体中以提高光催化活性。     

Theoretical design of direct Z-scheme SnC/PtSe2 heterostructure with enhanced photocatalytic performance and tunable optoelectronic properties

Recently, direct Z-scheme heterostructures have attracted much attention because of their outstanding electronic properties and excellent photocatalytic performance. In this article, the electronic, optical and photocatalytic properties of SnC/PtSe₂ heterojunction are systematically explored via first-principles calculations. Evidence suggests that a Type-Ⅱ band alignment as well as an indirect bandgap of 1.35 eV can be observed in the SnC/PtSe₂ heterojunction. The combined influence of the built-in electric field from SnC to PtSe₂ and the band bending causes a Z-scheme carrier migration mechanism. At biaxial strains of −3%–5%, the band edge positions of the heterojunction are able to cross the redox potential of water. The light absorption coefficient of 4.21 × 10⁵ cm⁻¹ and the energy conversion efficiency of 42.32% demonstrate that the photon energy can be utilized by the heterostructure efficiently. Furthermore, the absorption coefficient in the visible range can be significantly increased under tensile strain. Hence, there are reasons to believe that SnC/PtSe₂ heterostructure has tremendous potential for application in the field of photocatalytic water decomposition.     

g-C3N4/SnS2异质结构:一类有潜力的光解水催化剂

采用第一性原理方法研究了层间耦合作用对g-C₃N₄/SnS₂异质结构的电子结构和吸光性质的影响.发现g-C₃N₄/SnS₂是一类典型的范德瓦异质结构,能有效吸收可见光,其价带顶和导带底与水的氧化还原势匹配,且由于电荷转移而导致的界面处极化场有利于光生载流子的分离.这些理论研究结果表明g-C₃N₄/SnS₂异质结构是一类非常有潜力的光解水催化材料.     

卟啉基非金属纳米片用于可见光光催化制氢

本文基于密度泛函理论预测了一种用于可见光范围光催化制氢的新型二维非金属纳米材料，该材料可以由HTAP分子脱氢聚合得到，具有良好的结构稳定性，且带隙为2.12 eV，可以实现可见光区域的光捕获. 材料的带边能级位置恰好包裹水的氧化还原电位，有利于实现全光解水. 电子的迁移率略高于空穴的迁移率，有利于光生载流子的分离. 光生电子可以提供足够的驱动力使得析氢反应自发进行.     

First-principles investigation of impurity concentration influence on bonding behavior,electronic structure and visible light absorption for Mn-doped BiOCl photocatalyst

We performed first-principles calculation to investigate the bonding behavior, electronic structure and visible light absorption of Mn_xBi_1−xOCl (x=0, 0.0625, 0.09375 and 0.125) using density functional theory (DFT) within a plane-wave ultrasoft pseudopotential scheme. The relaxed structural parameters are consistent with the experimental results. The bonding behavior, bond orders, Mulliken charges and bond populations as well as formation energies are obtained. The calculated band structures and density of states show that Mn incorporation results in some impurity energy levels of Mn 3d states in forbidden band as well as valence band and conduction band, and that Mn 3d states, for the modest Mn doping concentration, not only can act as the capture center of excited electrons under longer wavelength light irradiation, but also may trap the photo-excited holes, improving the transfer of photo-excited carriers to the reactive sites. Our calculated optical absorption spectra exhibit that the spectral absorption edge is obviously red-shifted and extends to the visible, red and infrared light region due to the incorporation of Mn. Our calculated absorption spectra are in excellent agreement with the experimental results of Mn-doped BiOCl photocatalyst.     

3d过渡金属掺杂锐钛矿相TiO2的第一性原理研究

采用基于密度泛函理论的平面波超软赝势方法研究了纯锐钛矿相TiO₂及掺杂3d过渡金属TiO₂的几何、电子结构及光学性质. 计算结果表明掺杂能级的形成主要是掺杂过渡金属3d轨道的贡献，掺杂能级在禁带中的位置是决定TiO₂吸收带边能否出现红移的重要因素. Cr，Mn，Fe，Ni，Co，Cu掺杂使TiO₂的吸收带边产生红移，并在可见光区有一定的吸收系数； Sc，Zn掺杂使TiO₂的吸收带边产生蓝移，但在可见光区有较大的吸收系数；掺V不但使TiO₂的吸收带边产生红移，增强了在紫外光区的光吸收，而且在可见光区有非常大的吸收系数.