The growth of soft magnetic FeNiN thin films under different experimental procedures

FeNiN thin films with good soft magnetic properties were synthesized on Si (1 0 0) substrates at 473 K by RF magnetron sputtering. The dependence of phase structure and magnetic properties on nitrogen partial pressure, nickel concentrations, film thickness and substrate temperature were systematically investigated. The phase evolution from α-(Fe,Ni)N to ξ-(Fe,Ni)₂N with increase of nitrogen partial pressure was seen. The addition of Ni caused FeNiN films to turn from BCC structure to FCC structure. Clear reproducible striped domains appeared at the film surfaces when X_Ni=19.6%, which is explained by the high enough perpendicular anisotropy and the small stress in the film. All films show smooth surfaces and good soft magnetic properties compared to corresponding FeN compounds. The magnetic properties depended dramatically on the phase structure. Optimum soft magnetic properties with H_C of <1 Oe are obtained between 5.0%?X_Ni?10.0%.     

Magnetic properties of self-assembled nanostructure films on the base of amorphous Ni granules

We report on structural and magnetic properties of granular films consisting of 2.5 nm Ni nanoparticles. The films are fabricated by the original laser electrodispersion technique, which allows producing nearly monodisperse and amorphous particles. Atomic force microscopy (AFM) study shows that in 8 nm thickness films the particles are self-assembled in clusters with the lateral size 100-150 nm and the height of about 8 nm. Performed by SQUID, the films magnetization measurements reveal superparamagnetic behaviour, characteristic for an ensemble of non-interacting single domain magnetic particulates. It is found that the magnetic moment of the particulate is equal to that of about 3000 individual Ni nanoparticles and the blocking temperature is close to room temperature. Defined from magnetic measurements, the size of single domain particulates correlates well with the size of the clusters determined from AFM images. We propose that exchange interaction plays an important role in the formation of the particulates by aligning the magnetic moments of the individual Ni nanoparticles inside the clusters. Presence of magnetic clusters with high blocking temperature makes the fabricated films potentially useful for high-density magnetic data storage applications.     

FORC analysis of Ni(SiO2) nanogranular film in the blocked regime

In this work the magnetic and structural properties of granular Ni(SiO₂) films are studied by means of FORCs diagrams and microscopy. Transmission electron microscopy images show that the sample is composed of a fine dispersion of Ni nanoparticles with 3.7 nm in average sizes. Magnetic measurements as function of temperature show that the nanoparticles are superparamagnetic at room temperature and are blocked at 5 K. The FORCs diagrams obtained below the blocking temperature allow us to determine the average size of the nanoparticles and the distribution of sizes in a very good agreement with TEM images.     

Synthesis and characterization of magnetic Fe/CNTs composites with controllable Fe nanoparticle concentration

Fe/CNTs composites, with different concentrations of Fe nanoparticles (NPs) on carbon nanotube (CNT) surfaces, were successfully fabricated via a facile solvothermal method. The lengths of CNTs are up to 10 μm and the mean diameter of the Fe nanoparticles is about 25 nm. The structures, composition and magnetic properties of the Fe/CNTs were characterized by XRD, FTIR, FE-SEM, TEM and PPMS. We found that the concentrations of Fe nanoparticles depositing on the CNTs could be controlled by adjusting the initial mass ratio of ferrocene to CNTs. The Fe/CNTs composites display good ferromagnetic properties at room temperature, with a saturation magnetization of 125 emu/g-Fe and a coercivity of 276 Oe. The Curie temperature of the sample is about 1038 K, slightly lower than that (1043 K) of the bulk iron.     

Room temperature magnetic properties of Fe and C implanted ZnO films

ZnO films prepared by radio frequency magnetron sputtering were singly or sequentially implanted with 120 keV Fe ions at a fluence of 5 × 10¹⁶ ions/cm² and 20 keV C ions at a fluence of 3 × 10¹⁵ ions/cm². Magnetic and optical properties as well as structures of the films have been investigated using various techniques. Magnetic measurements show that the as-deposited ZnO film presents room temperature ferromagnetism. Single Fe or C ion implantation has no contribution to enhancement in the film magnetism, while magnetic moment increases distinctly in the Fe and C ions sequentially implanted film. Results from structural measurements reveal that Fe nanoparticles are formed in the Fe singly implanted ZnO film. The post C implantation induces dissolution of Fe nanoparticles and promotes Fe atoms to substitute Zn atoms in the lattice. Based on the structural results, the effect of magnetic enhancement has been tentatively interpreted.     

Growth,structure and thermal reduction of MOCVD-deposited Fe films on Al2O3 (0 0 0 1) substrates

Fe films with strong preferred orientation were prepared on Al₂O₃ (0 0 0 1) substrates by a new two-step method using low-pressure metal-organic chemical vapor deposition (LP-MOCVD) method. X-ray diffraction (XRD) and a vibrating sample magnetometer were employed to characterize the structure and magnetic properties of the Fe films before and after thermal reduction, which was performed in hydrogen flow at 723–1023 K. XRD patterns indicate that the films changed into α-Fe (bcc) mono-phase from a mixture of α-Fe₂O₃ and/or Fe (bcc).     

Magnetic nanoparticles as building blocks for high-performance magnetic materials

We report on the magnetic behaviour of films of Fe nanoparticles deposited from the gas phase with sizes in the range 2–3 nm embedded in Ag and Co matrices and Co nanoparticles of the same size embedded in Ag matrices. Magnetometry measurements, using a VSM, of very low volume fraction (1–2%) assemblies of Fe and Co in Ag show perfect superparamagnetism and enable us to confirm that the size distribution of the particles in the matrix is the same as that of the free particles prior to deposition. The hysteresis loops at 2 K, which is below the blocking temperature, show that the particles have a uniaxial anisotropy that is randomly oriented in three dimensions with the Co nanoparticles having a much higher anisotropy than the Fe particles. The soft magnetic behaviour of pure Fe and Co nanoparticle films with no matrix is well described by a random anisotropy model and is consistent with the formation of a correlated super-spin glass (CSSG) characteristic of amorphous materials. The Co nanoparticle films appear to have a lower random anisotropy than the Fe ones in contrast to the behaviour observed for the isolated particles. Films of Fe nanoparticles embedded in Co matrices, whose saturation magnetization exceeds the Slater–Pauling curve, also show magnetic behaviour consistent with a CSSG. At high volume fractions, the films of Fe nanoparticles embedded in Co matrices behave almost identically to films of pure Co nanoparticles.     

Exchange bias and magnetothermal properties in Fe@Mn nanocomposites

We have studied the Exchange Bias (EB) effect in nanocomposite films consisting of Fe nanoparticles (mean size ∼1.9 nm) embedded in an antiferromagnetic Mn matrix. They were produced by co-deposition through a gas aggregation cluster source and molecular beam epitaxy and have different Fe volume filling fractions (2.2% and 24.8%). The exchange field, higher in the sample with higher Fe concentration (at T=5 K, H_ex∼460 Oe for 24.8% and ∼310 Oe for 2.2% ), in both the samples decreases with increasing T, finally disappearing at T∼40 K. The EB properties have been studied in conjunction with results on the thermal dependence of the magnetic coercivity, zero-field-cooled and field-cooled magnetization and thermoremanence. The different Fe content strongly affects the magnetothermal properties, featuring superparamagnetic relaxation in the diluted sample and a reentrant ferromagnet-type transition in the concentrated one. Hence, the EB properties of the two samples have been discussed in consideration of such peculiarities of the magnetic behavior and highlighting the role of the Mn matrix.     

Structural and magnetic properties of evaporated Fe thin films on Si(1 1 1), Si(1 0 0) and glass substrates

We present experimental results on the structural and magnetic properties of series of Fe thin films evaporated onto Si(1 1 1), Si(1 0 0) and glass substrates. The Fe thickness, t, ranges from 6 to110 nm. X-ray diffraction (XRD) and atomic force microscopy (AFM) have been used to study the structure and surface morphology of these films. The magnetic properties were investigated by means of the Brillouin light scattering (BLS) and magnetic force microscopy (MFM) techniques. The Fe films grow with (1 1 0) texture; as t increases, this (1 1 0) texture becomes weaker for Fe/Si, while for Fe/glass, the texture changes from (1 1 0) to (2 1 1). Grains are larger in Fe/Si than in Fe/glass. The effective magnetization, 4πM_eff, inferred from BLS was found to be lower than the 4πM_S bulk value. Stress induced anisotropy might be in part responsible for this difference. MFM images reveal stripe domain structure for the 110 nm thick Fe/Si(1 0 0) only.     

Ni thin films vacuum-evaporated on polyethylene naphthalate substrates with and without the application of magnetic field

We study the structural properties of the surface roughness, the surface mound size and the interfacial structure in Ni thin films vacuum-deposited on polyethylene naphthalate (PEN) organic substrates with and without the application of magnetic field and discuss its feasibility of fabricating quantum cross (QC) devices. For Ni/PEN evaporated without the magnetic field, the surface roughness decreases from 1.3 nm to 0.69 nm and the surface mound size increases from 32 nm to 80 nm with the thickness increased to 41 nm. In contrast, for Ni/PEN evaporated in the magnetic field of 360 Oe, the surface roughness tends to slightly decrease from 1.3 nm to 1.1 nm and the surface mound size shows the almost constant value of 28-30 nm with the thickness increased to 35 nm. It can be also confirmed for each sample that there is no diffusion of Ni into the PEN layer, resulting in clear Ni/PEN interface and smooth Ni surface. Therefore, these experimental results indicate that Ni/PEN films can be expected as metal/insulator hybrid materials in QC devices, leading to novel high-density memory devices.     

Effect of Fe substitution on the phase stability and magnetic properties of Mn-rich Ni-Mn-Ga ferromagnetic shape memory alloys

The influence of Fe additions on the martensitic transformation and magnetic properties of Mn-rich Ni-Mn-Ga alloys was investigated by substituting either 1 at% Fe for each atomic species or by substituting Ni with varying amounts of Fe. The magnetic structure of the alloys was studied using ⁵⁷Fe Mössbauer spectroscopy. Mössbauer spectra revealed typical paramagnetic features in Mn-rich Ni-Mn-Ga-Fe alloys owing to the preferential site occupancy of Fe atoms at Ni sites. The evolution of the magnetic properties and phase stability has been correlated with the chemical and atomic ordering in these alloys.     

The interaction of Fe on MgO(1 0 0) surfaces

The atomic interaction and magnetic properties of ultrathin Fe films grown on cleaved and polished MgO(1 0 0) surfaces were studied by conversion electron Mössbauer spectroscopy (CEMS). ⁵⁷Fe layers were deposited as probe atoms in different layer positions in 10 ML thick Fe films. Fe layers of different thicknesses were formed on polished and cleaved substrate surfaces at RT deposition. The analysis of the spectra showed no Fe-O^2- interaction in MgO/Fe interface. FeO phase formation was excluded. The Mössbauer spectrum of 5 ML ⁵⁷Fe sample showed enhanced internal magnetic field at 80 K. No interdiffusion of ⁵⁷Fe and ⁵⁶Fe atoms was observed between the layers at room temperature.     

Magnetic properties and morphology of Ni nanoparticles synthesized in gas phase

We report on the size, structure and magnetic properties of Ni nanoparticles fabricated with a free-jet sputtering nanoparticle source. It is found how the pressure of the inert gas and the diameter of the source nozzle can control the particle size and coercivity in a wide range. Measurements of the specific magnetic moment of Ni nanoparticles are reported. A particular growing regime is found at high pressures over 1.8 mbar observing a further aggregation process that leads to nanoparticle agglomerates with diameters larger than 100 nm with a low dispersion in size.     

Structure and magnetism of bcc(1 1 0)-like Fe films grown on Cu(0 0 1) via ion beam triangulation and spin-polarized electron capture

The structure and magnetism of thin epitaxial Fe layers grown on Cu(0 0 1) is investigated by grazing scattering of fast H and He atoms. Information on the atomic structure of the film and substrate surfaces is obtained by making use of ion beam triangulation with protons. The magnetic behavior is studied via the polarization of light emitted after capture of spin-polarized electrons into excited atomic terms during scattering of He atoms. For the formation of bcc(1 1 0)-like Fe films at higher coverages, we detect differences in structural and magnetic properties for room and low temperature growth. We suggest that the crystalline structure depends on the film morphology and that Cu impurities affect the magnetic properties.     

Perpendicular magnetization in Fe/Ni bilayers on GaAs(0 0 1)

Following the concept of spin-injection into a semiconductor-based device, a ferromagnetic element (like a GMR multilayer structure) can be used as a spin filter. A high spin-polarization of the electrons can be realized by the preparation of a monocrystalline multilayer structure consisting of ultrathin films of a high magnetic polarization. In the case of ultrathin films, the manipulation of the easy-axis of magnetization is possible, by changing the anisotropy terms contributing to the effective anisotropy of the structure. We report on the structural and magnetic properties of Ni/Fe and Fe/Ni bilayers epitaxially grown on GaAs(0 0 1). By a proper choice of Fe and Ni sequences (Fe/Ni/GaAs) and their thickness (up to 3 ML of Fe on the top of Ni), the rotation of magnetization from the in-plane to the out-of-plane direction was achieved.     

Solid-state synthesis and phase transformations in Ni/Fe films: Structural and magnetic studies

We have used X-ray diffraction, volume magnetocrystalline anisotropy constant and resistance measurements to study solid-state synthesis in Ni(0 0 1)/Fe(0 0 1), Ni/Fe(0 0 1) and Ni/Fe thin films with the atomic ratio between Fe and Ni of 1:1 (1Fe:1Ni), and 3:1 (3Fe:1Ni). We have found that the formation of Ni₃Fe and NiFe phases in the 1Fe:1Ni films takes place at temperatures ∼620 and ∼720 K, correspondingly. In the case of the 3Fe:1Ni films the solid-state synthesis starts with Ni₃Fe and NiFe phase formation at the same temperatures as for the 1Fe:1Ni films. The increasing of annealing temperature above 820 K leads to the nucleation of a paramagnetic γ_par phase at the FeNi/Fe interface. The final products of solid-state synthesis in the Ni(0 0 1)/Fe(0 0 1) thin films are crystallites which consist of the epitaxially intergrown NiFe and γ_par phases according to the [1 0 0](0 0 1)NiFe||[1 0 0](0 0 1)γ_par orientation relationship. The crystalline perfection and epitaxial growth of the (NiFe+γ_par) crystallites on the MgO(0 0 1) surface allow to distinguish (0 0 2)γ_par and (0 0 2)NiFe X-ray peaks (the cell parameters are: a(γ_par)=0.3600±0.0005 nm and a(NiFe)=0.3578±0.0005 nm, correspondingly). At low temperatures the paramagnetic γ_par phase undergoes the martensite _γpar→α^′${\gamma }_{\mathrm{par}}\to {\alpha }^{\prime }$ phase transition which can be hindered by thermal and epitaxial strains and epitaxial clamping with a MgO substrate. On the basis of the studies of the thin-film solid-state synthesis we predict the existence of two novel structural phase transformations at the temperatures of about 720 and 820 K for alloys of the invar region of the Fe–Ni system.     

Fourfold in-plane magnetic anisotropy in epitaxial Fe(1 1 0)/Cu(0 0 1) and Fe(1 1 0)/Ni(0 0 1) bilayers

Epitaxial Fe(1 1 0) films with thicknesses of 100-800 nm on Cu(0 0 1) and Ni(0 0 1) buffer layers grown on MgO(0 0 1) substrates have been fabricated. These films contain Fe(1 1 0) crystallites which are in the Pitsch orientation relationship. Magnetization and the fourfold in-plane magnetic anisotropy constants of these films have been determined by torque measurements. All the samples under study are characterized by a fourfold magnetic anisotropy with easy axes parallel to the [1 0 0] and [0 1 0] directions of Cu(0 0 1) and Ni(0 0 1) layers. The measured values of the constant for Fe(1 1 0)/Cu(0 0 1) are found to depend on deposition temperature; a maximum value of (2.5±0.1)×10⁵ erg/cm³ is reached after annealing at 600 °С. The in-plane torque measurements on Fe(1 1 0)/Ni(0 0 1) bilayers obtained at 300 °С, on the other hand, exhibit a constant value of (2.7±0.1)×10⁵ erg/cm³. Assuming an exchange interaction between the Fe(1 1 0) crystallites, which are in the Pitsch orientation relationship, the fourfold in-plane magnetic anisotropy has been calculated as 2.8×10⁵ erg/cm³. The deviations of the experimental values from the predicted one may be explained by the formation of a polycrystalline phase within the Fe(1 1 0) layer and a partial disorientation of the epitaxial crystallites.     

Structure and magnetic properties of magnetron-sputtered [(Fe/Pt/Fe)/Au]n multilayer films

Using dc magnetron sputtering, Fe/Pt/Au multilayer films were prepared, and the effects of Au layer thickness and annealing temperature on structure and magnetic properties of the Fe/Pt/Au multilayer films were investigated. The as-deposited Fe/Pt/Au multilayer films have good periodic structure with composition modulation along the growth direction. The stress stored in the as-deposited films promoted the ordering of the films annealed at 400 °C. When the films were annealed at 500 °C, the thicker Au layer could restrain the order-disorder transformation region volume and lead to the decrease of the ordered volume fraction with Au layer thickness increasing.     

Extraordinary Hall effect on Fe-rich amorphous thin films and Fe-rich/Cu multilayers

In this study we investigated the magnetic and transport properties of thin Fe-rich amorphous films and Fe-rich/Cu multilayers. We compared the extraordinary Hall effect in these two types of samples and discussed it in terms of thickness and sample structure. The thicker films exhibited a strong in-plane magnetic anisotropy, and by decreasing film thickness both saturated Hall resistivity and Hall sensitivity increase. A Hall resistivity value of 20 μΩ cm is observed in 100 nm thick Fe-rich films at 12 K and a sensitivity of 1.3 Ω/T is obtained at room temperature. Electrical conductance increases and Hall resistivity decreases when the films are sandwiched with Cu.     

Characteristics of Ni films deposited on SiO2/Si(1 0 0) and MgO(0 0 1) by direct current magnetron sputtering system with the oblique target

280 nm-thick Ni films were deposited on SiO₂/Si(1 0 0) and MgO(0 0 1) substrates at 300 K, 513 K and 663 K by a direct current magnetron sputtering system with the oblique target. The films deposited at 300 K mainly have a [1 1 0] crystalline orientation in the film growth direction. The [1 1 0]-orientation weakens and the [1 1 1]- and [1 0 0]-orientations enhance with increasing deposition temperature. The lattice constant of the Ni films is smaller than that of the Ni bulk, except for the film grown on MgO(0 0 1) at 663 K. Furthermore, as the deposition temperature increases, the lattice constant of the films grown on the SiO₂/Si(1 0 0) decreases whereas that of the films grown on the MgO(0 0 1) increases. The films deposited at 300 K and 513 K grow with columnar grains perpendicular to the substrate. For the films deposited at 663 K, however, the columnar grain structure is destroyed, i.e., an about 50 nm-thick layer consisting of granular grains is formed at the interface between the film and the substrate and then large grains grow on the layer. The Ni films deposited at 300 K consist of thin columnar grains and have many voids at the grain boundaries. The grains become thick and the voids decrease with increasing deposition temperature. The resistivity of the film decreases and the saturation magnetization increases with increasing deposition temperature.