Impedance and FTIR studies on plasticized PMMA–LiN(CF<Subscript>3</Subscript>SO<Subscript>2</Subscript>)<Subscript>2</Subscript> nanocomposite polymer electrolytes

Plasticized polymer electrolytes composed of poly(methyl methacrylate) (PMMA) as the host polymer and lithium bis(trifluoromethanesulfonyl)imide LiN(CF₃SO₂)₂ as a salt were prepared by solution casting technique at different ratios. The ionic conductivity varied slightly and exhibited a maximum value of 3.65 × 10⁻⁵ S cm⁻¹ at 85% PMMA and 15% LiN(CF₃SO₂)₂. The complexation effect of salt was investigated using FTIR. It showed some simple overlapping and shift in peaks between PMMA and LiN(CF₃SO₂)₂ salt in the polymer electrolyte. Ethylene carbonate (EC) and propylene carbonate (PC) were added to the PMMA–LiN(CF₃SO₂)₂ polymer electrolyte as plasticizer to enhance the conductivity. The highest conductivities obtained were 1.28 × 10⁻⁴ S cm⁻¹ and 2.00 × 10⁻⁴ S cm⁻¹ for EC and PC mixture system, respectively. In addition, to improve the handling of films, 1% to 5% fumed silica was added to the PMMA–LiN(CF₃SO₂)₂–EC–PC solid polymer electrolyte which showed a maximum value at 6.11 × 10⁻⁵ S cm⁻¹ for 2% SiO₂.     

Preparation and characterization of the polymer electrolyte system ENR50/PVC/EC/PC/LiN(CF<Subscript>3</Subscript>SO<Subscript>2</Subscript>)<Subscript>2</Subscript> for electrochemical device applications

Polymer electrolytes containing epoxidised natural rubber (ENR50)/poly(vinyl chloride) (PVC) blend as a polymer host, a solvent mixture of ethylene carbonate (EC) and propylene carbonate (PC) as a plasticizer, and lithium imide, LiN (CF₃SO₂)₂, as a salt were studied. Polymer electrolytes that were obtained by solvent cast yielded solid dry rubbery films with a thickness range of 110–125 μm. Impedance spectroscopy, Fourier transform infra red (FTIR) spectroscopy, differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) were performed on these samples. The prepared solid polymer electrolytes exhibit ionic conductivities in the order 10⁻⁴ S cm⁻¹ at room temperature as expected. However, the physical properties of the electrolytes have improved significantly when optimal composition has been selected. Paper presented at the International Conference on Solid State Science and Technology 2006, Kuala Terengganu, Malaysia, Sept. 4–6, 2006.     

Solid polymer electrolytes based on squaric acid structure

Poly(squarate)s (PPS-1 and PPS-2) were synthesized by the reaction of squaryl dichloride with hydroquinone for PPS-1 and with 2,5-diethoxy-1,4-bis(trimethylsilyloxy)benzene for PPS-2, and the ionic conductivities, thermal properties, and electrochemical and thermal properties of their polymer electrolytes with LiN(CF₃SO₂)₂ were investigated. The ionic conductivity increased with increasing the lithium salt concentration for the PPS-1–LiN(CF₃SO₂)₂ electrolyte, and the highest ionic conductivities of 8.60 × 10⁻⁵ S/cm at 100 °C and 9.57 × 10⁻⁸ S/cm at 30 °C were found at the [Li] to [O] ratio of 2:1. And also, the ionic conductivity for the PPS-1–LiN(CF₃SO₂)₂ electrolyte increased with an increase in the lithium salt concentration, reached a maximum value at the [Li] to [O] ratio of 1:2, and then decreased. The highest ionic conductivity was to be 1.04 × 10⁻⁵ S/cm at 100 °C and 1.71 × 10⁻⁸ S/cm at 30 °C, respectively. Both polymer electrolytes exhibited relatively better electrochemical and thermal stabilities. Addition of the PPS-1 as a plasticizer into the poly(ethylene oxide) (PEO)–LiN(CF₃SO₂)₂ electrolyte system suppressed the crystallization of PEO, and improved the ionic conductivity at room temperature. Invited paper dedicated to Professor W. Weppner on his 65th birthday.     

Enhancement of the electrochemical properties with the effect of alkali metal systems on PEO/PVdF-HFP complex polymer electrolytes

Polymer blend electrolytes based on poly(ethylene oxide) (PEO) and poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP) were prepared by using different lithium salts LiX (X = ClO₄, BF₄, CF₃SO₃, and N [CF₃SO₂]₂) using solution casting technique. To confirm the structure and complexation of the electrolyte films, the prepared electrolytes were subjected to X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) analysis. Alternating current (AC) impedance analysis was performed for all the electrolyte samples at various temperatures from 303 to 343 K. The result suggests that among the various lithium salts, LiN[CF₃SO₂]₂-based electrolytes exhibited the highest ionic conductivity at 8.20 × 10^?4 S/cm. The linear variation of the ionic conductivity of the polymer electrolytes with increasing temperature suggests the Arrhenius-type thermally activated process. Activation energies were found to decrease when doping with lithium imide salt. The dielectric behavior has been analyzed using dielectric permittivity (ε*), electric modulus (M*), and dissipation factor (tanδ) of the samples. Cyclic voltammetry has been performed for the electrolyte films to study their cyclability and reversibility. Thermogravimetric and differential thermal analysis (TG/DTA) was used to ascertain the thermal stability of the electrolytes, and the porous nature of the electrolytes was identified using scanning electron microscopy via ion hopping conduction. Surface morphology of the sample having maximum conductivity was studied by an atomic force microscope (AFM).     

Electrical properties of plasticized chitosan-lithium imide with oleic acid-based polymer electrolytes for lithium rechargeable batteries

Solid polymer electrolytes (SPEs) were prepared and their electrochemical characteristics were characterized. The composition of SPEs containing chitosan, lithium trifluoromethane sulfonimide (LiN(CF₃SO₂)₂) and oleic acid (OA) was optimized employing ac impedance measurements at various temperatures. The electrical conductivity of the SPEs with OA shows the highest value and the presence of OA does not change the structure of the polymer. Paper presented at the International Conference on Functional Materials and Devices 2005, Kuala Lumpur, Malaysia, June 6 – 8, 2005.     

Polymer electrolytes plasticized with hyperbranched polymer for lithium polymer batteries

Hyperbranched polymers (HBPs) with different terminal groups and different ethylene oxide (EO) chain lengths were prepared, and the influence of the HBP structures including molecular weights and molecular weight distribution on the ionic conductivity and the mechanical property of the composite polymer electrolytes composed of poly (ethylene oxide) (PEO), HBP, BaTiO₃ as a ceramic filler, and LiN(CF₃SO₂)₂ as a lithium salt were investigated. It was found that the molecular weights of the HBP do not affect significantly the ionic conductivity, but the molecular weight distribution might affect it, and also further branching at the terminals of the HBP led to a decrease in the ionic conductivity. The HBP with longer EO chain length was effective for enhancement of the ionic conductivity in comparison with the HBP with shorter one. The increase in cross-linkable groups (acryloyl group) at the terminals of the HBP improved the tensile strength, but caused the ionic conductivity to decrease. Loosely cross-linked composite polymer electrolyte showed higher ionic conductivity and higher tensile strength than no cross-linked one. Paper presented at the Patras Conference on Solid State Ionics — Transport Properties, Patras, Greece, Sept. 14 – 18, 2004.     

An investigation on PAN-PVC-LiTFSI based polymer electrolytes system

Polymer-salt complex with poly(vinyl chloride) (PVC) and poly(acrylonitrile) (PAN) as host polymers blended with lithium bis-(trifluoro methanesulfonyl)imide, LiTFSI [LiN(CF₃SO₂)₂] as dopant salt were prepared in the form of thin film. Fourier transform infrared (FTIR) studies show the evidence of the complexation between PVC, PAN and LiTFSI. Ionic conductivity studies reveal that polymer electrolyte with 30 wt.% LiTFSI has the highest ionic conductivity of 4.39 × 10^− 4 S/cm at room temperature. The polymer electrolytes are also found to be stable up to 315 °C before they decompose. Thermal stability of the polymer electrolytes was also found to increase with increase in salt content. This was proven through thermogravimetric studies.     

Ionic conduction and thermal properties of poly(ethylene oxide) - Er (CF3SO3)3 films

Measurements of electrical conductivity and thermal behaviour have been carried out on polymer electrolyte films obtained by the addition of erbium triflate to poly(ethylene oxide), PEO. Homogeneous electrolyte samples were prepared by using solvent casting and hot-pressing techniques to produce films with a composition defined by the general formula (EO)_nEr(CF₃SO₃)₃, where n lies between 3 and 150. This electrolyte system was found to behave in a manner broadly similar to other trivalent salt containing polymer electrolytes, however, in contrast to previously studied lanthanide systems, a salt - polymer complex crystallized after prolonged annealing of salt rich compositions at room temperature. Paper presented at the 2nd Euroconference on Solid State Ionics, Funchal, Madeira, Portugal, Sept. 10 – 16, 1995     

Electrical,structural, and thermal studies of antimony trioxide-doped poly(acrylic acid)-based composite polymer electrolytes

In this work, we investigate the electrical, structural, and thermal properties of composite polymer electrolytes (CPEs). Different mass fractions of antimony trioxide filler, Sb₂O₃, are added into poly(acrylic acid) (PAA)-based polymer electrolytes with N-lithiotrifluoromethane sulphonamide [LiN(SO₂CF₃)₂] (LiTFSI) as doping salt. Characteristics such as alternating current (AC)–impedance spectroscopy, attenuated total reflectance–Fourier transform infrared (ATR-FTIR), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA) are analyzed. The highest ionic conductivity of (2.15?±?0.01)?×?10^?4 S cm^?1 is achieved at room temperature with addition of 6 wt% of fillers. The ionic transportation is further proven in a transference number study under DC polarization, whereas ATR-FTIR is employed to explore the complexation between PAA, LiTFSI, and Sb₂O₃. TGA reveals the improved thermal stability of CPEs. The glass transition temperature (T _g) is reduced upon addition of Sb₂O₃ as shown in DSC analysis.     

Ionic conductivity studies in PMMA/PVdF polymer blend electrolyte with lithium salts

Batteries using ionically conducting polymer membranes as electrolytes are very attractive, since the concept of power sources capable of combining a high energy content with plasticity is very appealing for the consumer electronics market and in electric vehicle applications. Blend based polymer electrolytes composed of poly (methylmethacrylate) (PMMA), Poly Vinylidene fluoride (PVdF), Lithium salt (LiX) (X=ClO₄, BF₄ and CF₃SO₃) and Dimethyl Phthalate (DMP) are prepared using solvent casting technique. The films have been characterized using XRD, FTIR, Thermal and SEM studies; the effect of complexing salt and temperature on ionic conductivity is also discussed. The maximum conductivity value obtained for the solid polymer electrolyte film at 303 K is 4.2 × 10⁻³ S/cm.     

Lithium ion transport in PVC/PEG 2000 blend polymer electrolytes complexed with LiX (X=ClO 4? , BF 4? , and CF3SO 3? )

This paper describes preparation and characterization of polyvinyl chloride and polyethylene glycol 2000 blend polymer electrolytes with LiX (X=ClO₄⁻, BF₄⁻, and CF₃SO₃⁻) salt by solution casting technique. Ethylene carbonate and propylene carbonate mixture was used as the plasticizers. LiClO₄-based electrolytes exhibited better ionic conduction behavior than other salts. The thermal profiles ascertain the stability of the membranes up to 120°C by differential scanning calorimetry. Complexation and crystallinity were studied through X-ray diffraction measurements. Phase morphological study reveals the porous nature of the polymer electrolyte membranes.     

Performance evaluation of PVdF gel polymer electrolytes

A series of gel polymer electrolytes containing PVdF as homo polymer, a mixture of 1:1 Ethylene Carbonate (EC) : Propylene Carbonate (PC) as plasticizer and lithium-bistrifluoromethane sulphone imide [imide — LiN (CF₃SO₂)₂] has been developed. Amounts of polymer (PVdF), plasticizer and the imide lithium salt have been varied as a function of their weight ratio composition in this regard. Dimensionally stable films possessing appreciable room temperature conductivity values have been obtained with respect to certain weight ratio compositions. However, conductivity data have been recorded at different possible temperatures, i.e., from 20 °C to 65 °C. XRD and DSC studies were carried out to characterize the polymer films for better amorphicity and reduced glass transition temperature, respectively. The electrochemical interface stability of the PVdF based gel polymer electrolytes over a range of storage period (24 h – 10 days) have been investigated using A.C. impedance studies. Test cells containing Li/gel polymer electrolyte (GPE)/Li have been subjected to undergo 50 charge-discharge cycles in order to understand the electrochemical performance behaviour of the dimensionally stable films of superior conductivity. The observed capacity fade of less than 20% even after 50 cycles is in favour of the electrochemical stability of the gel polymer electrolyte containing 27.5% PVdF −67.5 % EC+PC −5% imide salt. Cyclic voltammetry studies establish the possibility of a reversible intercalation — deintercalation process involving Li⁺ ions through the gel polymer electrolyte.     

The cycling performances of lithium–sulfur batteries in TEGDME/DOL containing LiNO3 additive

The cycling performance of lithium–sulfur batteries in binary electrolytes based on tetra(ethylene glycol)dimethyl ether (TEGDME) and 1,3-dioxolane(DOL) with lithium nitrate (LiNO₃) additive were investigated. The highest ionic conductivity was obtained for 1 M LiN(CF₃SO₂)₂ (LiTFSI) in TEGDME/DOL?=?33:67(volume ratio)-based electrolyte. The cyclic efficiency of lithium–sulfur batteries was dramatically increased with LiNO₃ additive as a shuttle inhibitor in electrolytes. The lithium–sulfur cell assembled with 1 M LiTFSI in TEGDME/DOL containing 0.2 M LiNO₃ additive for electrolyte, the elemental sulfur for cathode, and the lithium metal for anode demonstrated the initial discharge capacity of about 900 mAh g^?1 and an enhanced cycling performance.     

Polymer electrolytes based on polycarbonates and their electrochemical and thermal properties

Polycarbonates (4a–d) with various side chain lengths were synthesized by the reaction of 1,4-bis(hydroxyethoxy)benzene derivatives and triphosgene in the presence of pyridine. The polymer electrolytes composed of 4a–d with lithium bis(trifluoromethanesulfonyl)imide (LiN(SO₂CF₃)₂, LiTFSI) were prepared, and their ionic conductivities and thermal and electrochemical properties were investigated. 4d-Based polymer electrolyte showed the highest ionic conductivity values of 1.0?×?10^?4?S/cm at 80 °C and 1.5?×?10^?6?S/cm at 30 °C, respectively, at the [LiTFSI]/[repeating unit] ratio of 1/2. Ionic conductivities of these polycarbonate-based polymer electrolytes showed the tendency of increase with increasing the chain length of oxyethylene moieties as side chains, suggestive of increased steric hindrance by side chains. Unique properties were observed for the 4a(n?=?0)-based polymer electrolyte without an oxyethylene moiety. All of polycarbonate-based polymer electrolytes showed good electrochemical and thermal stabilities as polymer electrolytes for battery application.     

AC impedance, FTIR and XRD investigations of poly acrylonitrile complexed with LiCF3SO3

Solid polymer electrolytes of high ionic conductivity are prepared using poly acrylonitrile (PAN), propylene carbonate (PC), ethylene carbonate (EC) and LiCF₃SO₃. The polymer films are characterised by X-ray diffraction, FTIR and a.c. impedance spectroscopic techniques. The conductivity studies of PAN-LiCF₃SO₃-PC-EC polymer electrolyte systems are carried out in the temperature range 301–373 K. The temperature dependence of the conductivity of the polymer films obeys the VTF relation. The conductivity values are presented and the results are discussed.     

FTIR and thermal studies of modified natural rubber based polymer electrolytes

Chemical modification of natural rubber (NR) has frequently been attempted to improve the performance in specific application. 30% poly (methyl metacrylate) grafted NR (MG 30) has been explored as a potential candidate for polymer electrolytes. The complexation effect of LiCF₃SO₃, ethylene carbonate (EC) and Al₂SiO₅ in polymer host electrolytes has been investigated using FTIR ICP-OES spectrometry. Thermal studies of the systems have displayed a stable trend of glass temperature transition at elevated salt concentration whereas incorporation of EC and filler into the system results in the same pattern in their T_g values. Paper presented at the International Conference on Functional Materials and Devices 2005, Kuala Lumpur, Malaysia, June 6 – 8, 2005.     

Effect of molecular weight of PMMA on the conductivity and viscosity behavior of polymer gel electrolytes containing NH<Subscript>4</Subscript>CF<Subscript>3</Subscript>SO<Subscript>3</Subscript>

The addition of polymethyl methacrylate (PMMA) having different molecular weights to electrolytes containing ammonium trifluoromethanesulfonate (NH₄CF₃SO₃) in diethyl carbonate (DEC) has been found to result in conductivity enhancement and to yield gel electrolytes with conductivity higher than the corresponding liquid electrolytes. The increase in conductivity has been found to be due to the dissociation of undissociated NH₄CF₃SO₃ and ion aggregates present in the electrolytes, and this has been supported by Fourier transform infrared spectroscopy results, which suggests active interaction of PMMA and NH₄CF₃SO₃ in these gel electrolytes. The increase in conductivity also depends upon the molecular weight of the polymer used and is relatively more for PMMA having lower molecular weight. The increase in viscosity with PMMA addition also depends upon the molecular weight of the polymer and is closely related to the conductivity behavior of these electrolytes. Polymer gel electrolytes have been found to be thermally stable up to a temperature of 125 °C.     

Raman study of ion-molecules interaction in poly(methylmetacrylate)-based gel electrolytes

Gel electrolytes have been obtained, containing LiX (X=ClO₄, N(CF₃SO)₂, AsF₆) dissolved in a ethylene carbonate-propylene carbonate mixture and PMMA as polymeric matrix. Ionic conductivity has been measured, for two different lithium salts. The changes in the Raman spectra have been studied as a function of the polymer content, lithium salt concentrations and for different anions. Two satellite bands of the internal bending and stretching modes of ethylene carbonate appear in the spectrum of lithium containing samples, because of the cation-solvent molecule interaction. Paper presented at the 1st Euroconference on Solid State Ionics held in Zakynthos, Greece, Sept. 11–18, 1994     

Electrical and structural properties of poly (ethylene oxide)/silver triflate polymer electrolyte system dispersed with MgO nanofillers

Solvent-free films of poly (ethylene oxide)–silver triflate (PEO–AgCF₃SO₃)/MgO-based nanocomposite polymer electrolytes (PEO)₅₀AgCF₃SO₃–x wt.% MgO (x = 1, 3, 5, 7, and 10) obtained using solution casting technique were found to exhibit an appreciably good complexation of MgO nanofiller within the polymer electrolyte system and non-Debye type of relaxation as revealed by Fourier transform infrared and complex impedance analyses. Optimized filler (5 wt.% MgO) when incorporated into the polymer electrolyte resulted in a maximum electrical conductivity of 2 × 10⁻⁶ S cm⁻¹ in conjunction with a silver ionic transference number (t _Ag+) of 0.23 at room temperature (298 K). Detailed structural, thermal, and surface morphological investigation indicated a slight reduction in the degree of crystallinity owing to the addition of MgO nanofiller.     

Vibrational spectra of two BEDT-TTF-based organic conductors: charge order

Infrared and Raman investigations of two phases of bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF) based organic conductors with the same CF₃CF₂SO₃⁻ anion: β′-(BEDT-TTF)₂CF₃CF₂SO₃ and δ′-(BEDT-TTF)₂CF₃CF₂SO₃, are shortly reviewed and compared with the most typical infrared properties of the family of (BEDT-TTF)₂RR′SO₃ organic conductors, where R = SF₅, CF₃, and R′ are CH₂, CF₂, CHF, CHFCF₂, and CH₂CF₂. The role of the molecular structur and spatial organization of the counterions is discussed. Presented at 2-nd International Conference on Functional Materials and Devices, ICFMD 2008, June 16–19, 2008, Kuala Lumpur, Malaysia