GaN/LiNbO3 (0 0 0 1) interface formation calculated from first-principles

The stable adsorption sites for both Ga and N ions on the ideal and on the reconstructed LiNbO₃ (0 0 0 1) surface are determined by means of first-principle total energy calculations. A single N layer is found to be more strongly bound to the substrate than a single Ga layer. The adsorption of a GaN monolayer on the polar substrate within different orientations is then modeled. On the basis of our results, we propose a microscopic model for the GaN/LiNbO₃ interface. The GaN and LiNbO₃ (0 0 0 1) planes are parallel, but rotated by 30° each other, with in-plane epitaxial relationship [1 0 0]_GaN‖ [1 1  0]_LiNbO3. In this way the (0 0 0 1) plane lattice mismatch between GaN and LiNbO₃ is minimal and equal to 6.9% of the GaN lattice constant. The adsorbed GaN and the underlying LiNbO₃ substrate have parallel c-axes.     

The v6 = 1 and v6 = 2 vibrational states of DCF3

The high-resolution infrared spectra of DCF₃ were reinvestigated in the ν₆ fundamental band region near 500 cm⁻¹ and around 1000 cm⁻¹ with the aim to assign and analyze the overtone level of the asymmetric CF₃ bending vibration v₆ = 2.The present paper reports on the first study of both its sublevels (A₁ and E corresponding to l = 0 and ±2, respectively) through the high-resolution analysis of the overtone band and the hot and bands.The well-known “loop method”, applied to and , yielded ground state energy differences Δ(K, J) = E₀(K, J) − E₀(K − 3,J) for the range of K = 6 to 30.In the final fitting of molecular parameters, we used the strategy of fitting all upper state data together with the ground state rotational transitions.This is equivalent to that calculating separately the and coefficients of the K-dependent part of the ground state energy terms from the combination loops.All rotational constants of the ground state up to sextic order could be refined in the calculation.This led to a very accurate determination of C₀ = 0.18924413(25) cm⁻¹, , and also .In the course of analyzing simultaneously the overtone band together with the and ν₆ bands, the original assignment of the fundamental ν₆ band [Bürger et al., J. Mol. Spectrosc. 182 (1997) 34-49] was found to be incompatible with the present one. Assignments of the (k + 1, l₆ = +1)/(k − 1,l₆ = −1) levels had to be interchanged, which changed the value of Cζ₆ = −0.14198768(26) cm⁻¹ and the sign of the combination of constants C − B − Cζ in the v₆ = 1 level to a negative value.     

Laser excitation spectrum of C3 in the region 26 000-30 700 cm

The vibrational structure of the electronic state of C₃ in the region 26 000-30 775 cm⁻¹ has been re-examined, using laser excitation spectra of jet-cooled molecules. Rotational constants and vibrational energies have been determined for over 60 previously-unreported vibronic levels; a number of other levels have been re-assigned. The vibrational structure is complicated by interactions between levels of the upper and lower Born-Oppenheimer components of the state, and by the effects of the double minimum potential in the Q₃ coordinate, recognized by Izuha and Yamanouchi [16]. The present work shows that there is also strong anharmonic resonance between the overtones of the ν₁ and ν₃ vibrations. For instance, the levels 2 1⁺ 1 and 0 1 ⁺ 3 are nearly degenerate in zero order, but as a result of the resonance they give rise to two levels 139 cm⁻¹ apart, centered about the expected position of the 2 1⁺ 1 level. With these irregularities recognized, every observed vibrational level up to 30 000 cm⁻¹ (a vibrational energy of over 5000 cm⁻¹) can now be assigned. A vibronic level at 30181.4 cm⁻¹, which has a much lower B′ rotational constant than nearby levels of the state, possibly represents the onset of vibronic perturbations by the electronic state; this state is so far unknown, but is predicted by the ab initio calculations of Ahmed et al. [36].     

Molecular origins of surface poisoning during CO oxidation over RuO2(1 1 0)

Metal oxides are of interest as environmental oxidation catalysts, but practical applications are often limited by poorly understood surface poisoning processes. RuO₂ is active for CO oxidation under UHV conditions but is deactivated by some surface poisoning processes at ambient pressures. In this work, we report kinetic models of surface poisoning during CO oxidation over RuO₂(1 1 0), based on data obtained from plane-wave, supercell DFT calculations. While a surface carbonate is stable at low O₂ pressures and high CO₂ exposures, it is not stable under catalytic conditions. A surface bicarbonate is more stable and deactivates the RuO₂ surface over a wide range of CO and oxygen pressures in the presence of trace amounts of water.     

High-resolution infrared and subterahertz spectroscopy of the v2 = 1, v5 = 1, and v3 = 2 levels of CH3Cl

High-resolution Fourier-transform infrared spectra between 1235 and 1680 cm⁻¹ and subterahertz spectra between 250 and 630 GHz of monoisotopic ¹³CH₃³⁵Cl have been recorded and analyzed simultaneously, with all Coriolis, α-resonance, and l-type interactions in the polyad of the v₂ = 1, v₅ = 1, and v₃ = 2 levels taken into account. Several α-resonances (Δk = ±2, Δl = ?1) generating perturbation-allowed transitions have been assigned in the rovibrational spectra. These resonances enabled us to determine accurately and independently the ground state rotational and centrifugal distortion parameters A₀ = 5.205 746 9 (55) cm⁻¹ and . Even , which is, however, correlated to higher-order α-resonance terms, was determined. With 51 upper state parameters varied, about 5800 rovibrational wavenumbers and more than 550 rotational frequencies pertaining to the excited vibrational states were fitted within their experimental accuracy.     

LIF excitation spectra for S0 → S1 transition of deuterated anthranilic acid COOD, ND2 in supersonic-jet expansion

Laser induced fluorescence (LIF) excitation spectrum for the S₀ → S₁ transition of anthranilic acid molecules deuterated in the substituent groups (COOD, ND₂) was investigated. Analysis of the LIF spectrum allowed for the assignment of the six most prominent fundamental in-plane modes of frequencies up to ca. . The experimental results show good correlation with the frequency changes upon deuteration computed with CIS (CI-Singles) and TD-DFT for the S₁ state. Deuteration induced red-shifts of the identified fundamental bands are used for examination of the alternative assignments proposed in earlier studies. Potential energy distributions (PED) and overlaps of the in-plane normal modes with frequencies below indicate that the correspondence of the respective vibrations of the deuterated and non-deuterated molecule is very good. A blue-shift of the 00 transition due to the isotopic substitution, is equal to . This relatively large value is caused primarily by a significant decrease of the N-H stretching frequency associated with the increase of strength of the intramolecular hydrogen bond upon the electronic excitation. The deuteration shift of the 00 band was interpreted in terms of the differences of the zero point energy (ZPE) between the S₀ and S₁ electronic states, computed with DFT and TD-DFT methods, respectively.     

Substantially low desorption barriers in recombinative desorption of deuterium from a Si(1 0 0) surface

We have studied desorption kinetics of deuterium molecules from a Si(1 0 0) surface by means of temperature-programmed desorption (TPD) spectra and isothermal desorptions.Three desorption components, denoted as β_1,A,β_1,B, and C, can be distinguished in semi-logarithmic plots of the TPD spectra.Their peak positions and intensities are strongly affected by the surface preparation methods employed, either with or without annealing to control the initial D coverage .Peak C appears at the leading edge of the TPD peak.It accounts for only about 5% of the TPD peak at and it diminishes rapidly with decreasing , vanishing at .In contrast, together the β_1,A and β_1,B peaks account for the whole TPD peak at any less than 1.0 ML. The maximum of the β_1,A peak is nearly constant at around the maximum temperature of the TPD peak.On the other hand, the β_1,B peak appears on the high-temperature side of the TPD peak and it systematically shifts to higher temperatures with decreasing .These results imply that first- and second-order kinetics are operating for the β_1,A and β_1,B desorptions, respectively.Isothermal desorption experiments confirm the above predicted kinetics for a limited region, namely .From the results for the rate curve analysis, the desorption barriers are evaluated to be 1.6 ± 0.1 eV and 1.8 ± 0.1 eV for the β_1,A and β_1,B desorptions, respectively.These values are substantially lower than the widely accepted value of ∼2.5 eV. To reproduce the measured TPD spectra we take the Arrhenius-type rate equation containing the first- and second-order rate terms for the β_1,A and β_1,B desorptions.The TPD spectra measured for can be reasonably fit with the proposed rate equation when the values given above for E_d,A and E_d,B are used. For , however, the TPD curves are not fit with the same values; rather, the best-fit curves require values for E_d,A and E_d,B larger than those given above. Combining the present kinetics results with those obtained by STM along with the studies, the β_1,A and β_1,B peaks may be attributed to desorption along the 2H path, while peak C may be attributed to desorption along the 4H path. The atomistic desorption mechanism as well as the energy relationship between the desorption barrier and isosteric heat of adsorption are discussed.     

Spectroscopic characterization of the potential energy functions of Ne2 Rydberg states in the vicinity of the Ne(S0) + Ne(4p′) dissociation limits

The gerade autoionizing Rydberg states of Ne₂ have been studied in the range 162 000-172 000 cm⁻¹ by 1 + 1′ resonant two-photon excitation from the Ne₂ X ground state via different vibrational levels of the Ne₂ C state. A rotationally resolved part of the spectrum allowed the determination of the potential energy functions of two states of 1_g and characters in the vicinity of the Ne(2p⁶¹S₀) + Ne (2p⁵4p′) dissociation limit. The presence of maxima in these potential energy functions is interpreted as originating from a repulsive interaction between the Rydberg electron and the neutral atom.     

Sub-Doppler high-resolution excitation spectroscopy of the S1 ← S0 transition of dibenzofuran

Rotationally resolved ultrahigh-resolution fluorescence excitation spectra of the S₁ ← S₀ transition of dibenzofuran have been observed using the technique of crossing a collimated molecular beam and the single-mode UV laser beam. 3291 rotational lines of the band and 3047 rotational lines of the band have been assigned. The band has been found to be a b-type transition, in which the transition moment is along the twofold symmetry axis of this molecule, and only the ΔK_a = ± 1 transitions were observed. The excited state is identified to be the S₁¹A₁(ππ^∗) state. In contrast with this, the band has been found to be an a-type transition in which the transition moment is along the long axis in plane. It indicates that the intensity of this vibronic band arises from vibronic coupling with the S₂¹B₂(ππ^∗) state. We determined the accurate rotational constants and the molecule have been shown to be planar both in the ground and excited states.     

Photoemission study of the Li/Ge(1 1 1)-3 × 1 reconstruction

In this article we report our findings on the electronic structure of the Li induced Ge(1 1 1)-3 × 1 reconstruction as determined by angle-resolved ultraviolet photoelectron spectroscopy (ARUPS) and core-level spectroscopy using synchrotron radiation. The results are compared to the theoretical honeycomb-chain-channel (HCC) model for the 3 × 1 reconstruction as calculated using density functional theory (DFT). ARUPS measurements were performed in both the and directions of the 1 × 1 surface Brillouin zone at photon energies of 17 and 21.2 eV. Three surface related states were observed in the direction. In the direction, at least two surface states were seen. The calculated band structure using the single-domain HCC model for Li/Ge(1 1 1)-3 × 1 was in good agreement with experiment, allowing for the determination of the origin of the experimentally observed surface states. In the Ge 3d core-level spectra, two surface related components were identified, both at lower binding energy with respect to the Ge 3d bulk peak. Our DFT calculations of the surface core-level shifts were found to be in fair agreement with the experimental results. Finally, in contrast to the Li/Si(1 1 1)-3 × 1 case, no double bond between Ge atoms in the top layer was found.     

First-principles study of adsorption and diffusion on Ge/Si(0 0 1)-(2 × 8) and Ge/Si(1 0 5)-(1 × 2) surfaces

Using first-principles total-energy calculations, we have investigated the adsorption and diffusion of Si and Ge adatoms on Ge/Si(0 0 1)-(2 × 8) and Ge/Si(1 0 5)-(1 × 2) surfaces. The dimer vacancy lines on Ge/Si(0 0 1)-(2 × 8) and the alternate S_A and rebonded S_B steps on Ge/Si(1 0 5)-(1 × 2) are found to strongly influence the adatom kinetics. On Ge/Si(0 0 1)-(2 × 8) surface, the fast diffusion path is found to be along the dimer vacancy line (DVL), reversing the diffusion anisotropy on Si(0 0 1). Also, there exists a repulsion between the adatom and the DVL, which is expected to increase the adatom density and hence island nucleation rate in between the DVLs. On Ge/Si(1 0 5)-(1 × 2) surface, the overall diffusion barrier of Si(Ge) along direction is relative fast with a barrier of ∼0.83(0.61) eV, despite of the large surface undulation. This indicates that the adatoms can rapidly diffuse up and down the (1 0 5)-faceted Ge hut island. The diffusion is also almost isotropic along [0 1 0] and directions.     

Phase discrimination of iron-silicides on Si(0 0 1) surfaces by three-dimensional reciprocal-lattice mapping

Various iron-silicides are grown on clean Si(0 0 1) surfaces by solid phase epitaxy, a process which involves the deposition of iron and subsequent annealing [6]. Among them, we studied the structure of three-dimensional (3D) elongated islands, which are the major silicide type produced at lower Fe coverage (∼1 monolayer) and ?500-600 °C annealing. We applied a newly developed method of azimuth-scan reflection high-energy electron diffraction (RHEED) to obtain 3D reciprocal-lattice mapping. We succeeded in discriminating an α-FeSi₂ phase from controversial bulk phases of the islands, and we were also able to determine the orientation relation as and , where the lattice mismatches are −1% in direction and +34% in direction. The attenuation of the incident electron beam along the length direction of the islands leads to extremely weak spots in the RHEED pattern. We emphasize that such an analysis of the reciprocal-lattice mapping is also useful in studying other 3D island structures. Using scanning tunneling microscopy, we showed that the island’s elongated directions are perpendicular to the dimer rows of the substrate located under the islands. The islands are located near the S_B step edges. The elongation lengths of the islands are almost the same as the widths of the Si substrate terraces. We discussed the formation mechanism of the 3D-elongated islands. From an atomic image of the facet and edge of a 3D-elongated island, we proposed an atomic-structure model of the island facet and edge: a Si adatom on the hollow site of four Si atoms of an unit, with ordering in the direction of the elongation, forming an facet locally.     

Repulsive and bound parts of the interatomic potentials of the lowest singlet electronic energy states of the MeRg complexes (Me = Zn, Cd; Rg = He, Ne, Ar, Kr, Xe)

Laser-induced fluorescence excitation spectra of MeRg (Me = Zn, Cd; Rg = He, Ne, Ar, Kr, Xe) complexes were recorded using the D¹ ← X¹ free ← bound transition. The complexes were produced in their ground state in a free-jet expansion beam and excited with a dye-laser beam directly to the excited state. Analysis of free ← bound unstructured profiles provided a shape of the repulsive part of the D¹-state potentials. Valence ab initio calculations of the ZnRg and CdRg ground- and excited-state potentials and electronic transition dipole moments for the studied transition were performed, taking scalar relativistic and spin-orbit effects into account. Results of the calculations show regularities and correlations in the repulsive branches and bound wells of the X¹- and D¹-state potentials as well as provide information on the bonding character in both electronic energy states. The trends were compared with available experimental results for ZnRg and CdRg as well as for MgRg and HgRg.     

Diode laser spectroscopy of CO2 at 790 nm

Absorption lines of ¹²C¹⁶O₂ have been examined by using a tunable diode laser spectrometer in the region around (790 nm). The spectrometer sources are commercially available double heterostructure InGaAlAs tunable diode lasers (TDLs) operating in the “free-running” mode, which allowed the detection of the line positions within . The observed carbon dioxide absorption lines belong to the combination overtone 2ν₂+5ν₃ ro-vibrational band with intensities ranging around .     

Molecular dynamics of [(CH2OH)3CNH3]2SiF6 by phase transition of 178 K

We have investigated the molecular motions of TRIS⁺ ([(CH₂OH)₃CNH₃]⁺) and ions in the [(CH₂OH)₃CNH₃]₂SiF₆ crystal below room temperature from the measurements of the spin-lattice relaxation time T₁ and the NMR absorption line of ¹H and ¹⁹F nuclei, in order to elucidate the changes of the molecular motions by the phase transition of T_c=178 K. The narrowing of the ¹⁹F-NMR line was observed around T_c=178 K and the reorientation of the anion appears above T_c. Moreover, from the analysis of the temperature dependence of T₁, we have observed that the activation energy of the reorientational motion of ions changes from 0.168 eV (T>T_c) to 0.185 eV (T<T_c). Based on these results, we found that the reorientational motion of ions is closely related to the origin of the phase transition at T_c. In addition, from the measurement of the ¹H-NMR line, we also found that the reorientational motion of H₂ in the -CH₂OH group becomes active accompanied by the phase transition.     

Modelling of phase transitions and reaction at CO adsorption on oxygen precovered Pd(1 1 1)

Using the interaction parameters up to the third neighbors and activated form of O and CO diffusion and their reaction, the model has been proposed for Monte-Carlo simulations describing the catalytic O + CO → CO₂ reaction and occurring phase transitions on Pd(1 1 1) surface. Upon adsorption of CO the pre-adsorbed oxygen transforms from p(2 × 2)_O phase into and phases in the limit of room and moderate temperatures, respectively. We demonstrate that the kinetic effects determine both the occurrence of the p(2 × 1)_O and disappearance of the phases at moderate and low temperatures, respectively. Using reaction rate as a fit parameter, we show that at room temperature the start of the reaction can be synchronized with the occurrence of phase.     

Epitaxial growth of Nd2Hf2O7(1 1 1) thin films on Ge(1 1 1) substrates by pulsed laser deposition

Nd₂Hf₂O₇ (NHO) thin films have been epitaxially grown by pulsed laser deposition (PLD) on Ge(1 1 1) substrates. In situ reflection high-energy electron diffraction (RHEED) evolution of the (1 1 1)-oriented NHO during the deposition has been investigated and shows that the epilayer has a twin-free character with type-B stacking. Interfacial structure of NHO/Ge has been examined by high-resolution transmission electron microscopy (HRTEM). The results indicate a highly crystalline film with a very thin interface, and the orientation relationship between NHO and Ge can be denoted as (1 1 1)_NHO//(1 1 1)_Ge and . Finally, twin-free epitaxial growth of NHO with type-B orientation displays temperature dependence and the type-B epitaxy is favored at high temperature.