Dynamics of NF3 in a condensed film on Au(1 1 1) as studied by electron-stimulated desorption

We report a low-temperature dynamics study of condensed layers of NF₃ on Au(1 1 1) by time-of-flight electron-stimulated desorption ion angular distribution (TOF-ESDIAD), temperature-programmed desorption (TPD) and low-temperature scanning tunneling microscopy (LT-STM). Upon adsorption at 30 K, molecular NF₃ adsorption occurs first at the step edges and at minor terrace defect sites with the formation of 2D islands. Within the islands, NF₃ is adsorbed in an upright conformation via the nitrogen lone pair electrons projecting fluorine atoms away from the surface as judged by the presence of only a sharp F⁺ central beam in the ESDIAD pattern. At higher coverages, 3D islands start to populate the surface. Electron bombardment of a thick NF₃ (∼6 ML) layer adsorbed on the Au(1 1 1) surface leads to emission of F⁺, N⁺, NF⁺, and ions as observed in the TOF-ESD distribution. Upon heating to ∼37 K, a sudden decrease of the and ion yield, which is not related to thermal desorption, is observed which reflects the surface migration of NF₃ molecules, leading to local thinning of the film. The thinning process occurs at the temperature of onset of molecular rotations and self-diffusion in the bulk NF₃ crystal. In this process, some NF₃ molecules move closer to the surface which results in higher efficiency for ion neutralization by the underlying metal surface. In the TPD spectra, the monolayer desorption is observed to begin at ∼65 K, exhibiting zero-order kinetics with an activation energy of 21 kJ/mol.     

Phase discrimination of iron-silicides on Si(0 0 1) surfaces by three-dimensional reciprocal-lattice mapping

Various iron-silicides are grown on clean Si(0 0 1) surfaces by solid phase epitaxy, a process which involves the deposition of iron and subsequent annealing [6]. Among them, we studied the structure of three-dimensional (3D) elongated islands, which are the major silicide type produced at lower Fe coverage (∼1 monolayer) and ?500-600 °C annealing. We applied a newly developed method of azimuth-scan reflection high-energy electron diffraction (RHEED) to obtain 3D reciprocal-lattice mapping. We succeeded in discriminating an α-FeSi₂ phase from controversial bulk phases of the islands, and we were also able to determine the orientation relation as and , where the lattice mismatches are −1% in direction and +34% in direction. The attenuation of the incident electron beam along the length direction of the islands leads to extremely weak spots in the RHEED pattern. We emphasize that such an analysis of the reciprocal-lattice mapping is also useful in studying other 3D island structures. Using scanning tunneling microscopy, we showed that the island’s elongated directions are perpendicular to the dimer rows of the substrate located under the islands. The islands are located near the S_B step edges. The elongation lengths of the islands are almost the same as the widths of the Si substrate terraces. We discussed the formation mechanism of the 3D-elongated islands. From an atomic image of the facet and edge of a 3D-elongated island, we proposed an atomic-structure model of the island facet and edge: a Si adatom on the hollow site of four Si atoms of an unit, with ordering in the direction of the elongation, forming an facet locally.     

Laser excitation spectrum of C3 in the region 26 000-30 700 cm

The vibrational structure of the electronic state of C₃ in the region 26 000-30 775 cm⁻¹ has been re-examined, using laser excitation spectra of jet-cooled molecules. Rotational constants and vibrational energies have been determined for over 60 previously-unreported vibronic levels; a number of other levels have been re-assigned. The vibrational structure is complicated by interactions between levels of the upper and lower Born-Oppenheimer components of the state, and by the effects of the double minimum potential in the Q₃ coordinate, recognized by Izuha and Yamanouchi [16]. The present work shows that there is also strong anharmonic resonance between the overtones of the ν₁ and ν₃ vibrations. For instance, the levels 2 1⁺ 1 and 0 1 ⁺ 3 are nearly degenerate in zero order, but as a result of the resonance they give rise to two levels 139 cm⁻¹ apart, centered about the expected position of the 2 1⁺ 1 level. With these irregularities recognized, every observed vibrational level up to 30 000 cm⁻¹ (a vibrational energy of over 5000 cm⁻¹) can now be assigned. A vibronic level at 30181.4 cm⁻¹, which has a much lower B′ rotational constant than nearby levels of the state, possibly represents the onset of vibronic perturbations by the electronic state; this state is so far unknown, but is predicted by the ab initio calculations of Ahmed et al. [36].     

A novel approach to measure the step line tension and the step dipole moment on vicinal Au(0 0 1) electrodes

In this paper we introduce a new experimental approach to determine the potential dependence of the step line tension on metal electrodes in contact with an electrolyte: (0 0 1) and (1 1 n) surfaces of single crystal gold electrodes were investigated by impedance spectroscopy in solutions containing weakly adsorbing anions, such as , F⁻ and . Within the limits of error the shift in the potential of zero charge is proportional to the step density of the vicinal surfaces indicative of a well-defined dipole moment per step length. The dipole moments per step atom are 6.8 ± 0.8, 5.2 ± 0.4, 5.8 ± 0.5 × 10⁻³ eÅ for , , and F⁻ containing electrolytes, respectively. Using the values for the pzc and the potential dependence of the capacitance curves, the potential dependence of the surface tension of the vicinal surfaces is determined. The line tension of the steps is then calculated from the difference between the surface tension of the stepped and the step free surface. Our results represent the first experimental confirmation of a recent theoretical model proposing that in absence of specifically adsorbed ions the step line tension should decrease (roughly linear) with potential.     

Coadsorption of CO and C6H6 on Co(0 0 0 1)

We have studied the influence of CO on the adsorption of benzene on the Co(0 0 0 1) surface using LEED, XPS, TDS and work function measurements. CO was found to reduce the benzene adsorption, but even at saturation CO exposure no complete blocking was observed. Thermal desorption of the coadsorbed layer featured CO and H₂ peaks indicating partial dehydrogenation of benzene and retaining of the CO bond. Ordered LEED structures were found with all coverages: Pre-adsorption of CO led to patterns already seen for pure carbon monoxide adsorption. Pre-adsorption of benzene showed the known structure of pure benzene also with small CO exposures, but higher CO exposures yielded a mixture of and patterns.     

Analysis of complex thermal desorption spectra: PTCDA on copper

Organic molecules often show very complex thermal desorption spectra. If there is an ordered structure the activation energy for desorption E_des will decrease within the first few layers because of the decreasing van der Waals interaction between molecules and substrate. This is specially true for the system 3,4,9,10-perylene-tetracarboxylic-dianhydride (PTCDA) on Cu(1 1 1). The thermal desorption spectra for this particular system consist of three different signals which can be attributed to the second layer, the multilayer and a phase consisting of nanocrystals. We did not see any desorption from the first layer of PTCDA on Cu(1 1 1). In the first part of this paper, we will outline a numerical algorithm to evaluate the spectra with respect to the desorption energy of the second layer () and the multilayer (). In agreement with the transition state theory, we found a pre-exponential factor of . Furthermore, we will show that nanocrystals have a contribution to the thermal desorption spectra different from the one of the multilayer. By evaluation of the third, high temperature signal it is possible to get parameters which describe the distribution of the nanocrystals and therefore gain further understanding of their growth.     

Absorption spectra of AsH2 radical in 435-510 nm by cavity ringdown spectroscopy

The absorption spectra of jet-cooled AsH₂ radicals were recorded in the wavelength range of 435-510 nm by cavity ringdown spectroscopy. The AsH₂ radicals were produced by pulsed DC discharge in a molecular beam of a mixture of AsH₃, SF₆, and argon. Seven vibronic bands with fine rotational structures have been identified and assigned as the , , and (n = 1-3) bands of the electronic transition. Based on the previous studies of AsH₂ radical, rotational assignments and rotational term values for each band were obtained, and the molecular parameters including vibrational constants, rotational constants, centrifugal distortion constants, and spin-rotation interaction constants were also determined.     

Vibronic spectra, ab initio calculations, and structures of conformationally non-rigid molecules of oxalyl halides in the ground and lowest excited electronic states. Part I: Reanalysis of the 3680 Å and 4100 Å absorption systems of oxalyl chloride

The vapor-phase absorption spectrum of oxalyl chloride in the 3000-4180 Å region has been re-examined at high resolution. Singlet-singlet and singlet-triplet electronic transitions of the trans-conformer found in the spectrum are in agreement with earlier works [W.J. Balfour, G.W. King, J. Mol. Spectrosc. 26 (1968) 384-397; ibid. 27 (1968) 432-442]. Torsion levels of trans-oxalyl chloride in the ground and excited and states were found for the first time. Ab initio calculations of structures for conformers of oxalyl chloride in the ground and lowest excited electronic states explain the absence of second conformer transitions in the vibronic absorption spectrum.     

Quantum critical behaviour in doped Y bB12 studied by ab initio calculations

The Kondo insulator Y bB₁₂ is known to undergo a transition to the metallic state with doping or under an external magnetic field. Within the virtual crystal approximation (VCA), we calculated the occupation of the Yb 4f and 5d shells, and , as a function of doping of Y bB₁₂ with the rare earths Tm and Lu. We found that exhibits an anomalous change at the critical concentration of the dopant, in agreement with experiment ( for Y b_1−xLu_xB₁₂ and for Y b_1−xTm_xB₁₂). We suggest that the critical behaviour seems to be strictly connected with the change of and in consequence the change of the Yb valency.     

X-ray initiated molecular photochemistry of Cl-containing adsorbates on a Si(1 0 0) surface using synchrotron radiation

X-ray initiated molecular photochemistry for SiCl₄ and CCl₄ adsorbed on Si(1 0 0) at ∼90 K following Cl 2p core-level excitation is investigated by photon stimulated ion desorption and ion kinetic energy distribution measurements. The Cl excitation of solid SiCl₄ induces the significant enhancement (∼900%) of the Cl⁺ yield, while the Cl excitation of condensed CCl₄ leads to a moderate enhancement (∼500%) of the Cl⁺ yield. The enhancement of Cl⁺ yield at the specific core-excited states is strongly correlated to the ion escaped energy. Upon X-ray exposure for CCl₄ adsorbed on Si(1 0 0) (20-L exposure), the Cl⁺ yields at resonances decrease and new structures at higher photon energies are observed. Cl⁺ yields at these new resonances are significantly enhanced compared to those at other resonances. These changes are the results of desorption and surface reaction of the CCl₄-Si surface complex due to X-ray irradiation. We have demonstrated that state-specific enhancement of ion desorption can be successfully applied to characterize the reaction dynamics of adsorbates adsorbed on surfaces by X-ray irradiation.     

Repulsive and bound parts of the interatomic potentials of the lowest singlet electronic energy states of the MeRg complexes (Me = Zn, Cd; Rg = He, Ne, Ar, Kr, Xe)

Laser-induced fluorescence excitation spectra of MeRg (Me = Zn, Cd; Rg = He, Ne, Ar, Kr, Xe) complexes were recorded using the D¹ ← X¹ free ← bound transition. The complexes were produced in their ground state in a free-jet expansion beam and excited with a dye-laser beam directly to the excited state. Analysis of free ← bound unstructured profiles provided a shape of the repulsive part of the D¹-state potentials. Valence ab initio calculations of the ZnRg and CdRg ground- and excited-state potentials and electronic transition dipole moments for the studied transition were performed, taking scalar relativistic and spin-orbit effects into account. Results of the calculations show regularities and correlations in the repulsive branches and bound wells of the X¹- and D¹-state potentials as well as provide information on the bonding character in both electronic energy states. The trends were compared with available experimental results for ZnRg and CdRg as well as for MgRg and HgRg.     

The v6 = 1 and v6 = 2 vibrational states of DCF3

The high-resolution infrared spectra of DCF₃ were reinvestigated in the ν₆ fundamental band region near 500 cm⁻¹ and around 1000 cm⁻¹ with the aim to assign and analyze the overtone level of the asymmetric CF₃ bending vibration v₆ = 2.The present paper reports on the first study of both its sublevels (A₁ and E corresponding to l = 0 and ±2, respectively) through the high-resolution analysis of the overtone band and the hot and bands.The well-known “loop method”, applied to and , yielded ground state energy differences Δ(K, J) = E₀(K, J) − E₀(K − 3,J) for the range of K = 6 to 30.In the final fitting of molecular parameters, we used the strategy of fitting all upper state data together with the ground state rotational transitions.This is equivalent to that calculating separately the and coefficients of the K-dependent part of the ground state energy terms from the combination loops.All rotational constants of the ground state up to sextic order could be refined in the calculation.This led to a very accurate determination of C₀ = 0.18924413(25) cm⁻¹, , and also .In the course of analyzing simultaneously the overtone band together with the and ν₆ bands, the original assignment of the fundamental ν₆ band [Bürger et al., J. Mol. Spectrosc. 182 (1997) 34-49] was found to be incompatible with the present one. Assignments of the (k + 1, l₆ = +1)/(k − 1,l₆ = −1) levels had to be interchanged, which changed the value of Cζ₆ = −0.14198768(26) cm⁻¹ and the sign of the combination of constants C − B − Cζ in the v₆ = 1 level to a negative value.     

Diode laser spectroscopy of ammonia at 760 nm

A tunable diode laser spectrometer has been employed to examine the unknown overtone absorption lines of NH₃ around (760 nm). The spectrometer sources are commercially available heterostructure AlGaAs tunable diode lasers operating in the “free-running” mode. The detection of the lines has been possible by the use of the wavelength modulation spectroscopy and the second harmonic detection technique. A special algorithm has been used in order to fit the highly modulated absorption lines. The weakest observed resonances have absorption cross sections on the order of ?/molecule or ?/amagat. For some of the more intense lines self-, air-, N₂-, He- and H₂-broadening coefficients have been obtained at room temperature and also some shifting coefficients have been measured.     

Sapphire (0 0 0 1) surface modifications induced by long-pulse 1054 nm laser irradiation

We have investigated modifications of sapphire (0 0 0 1) surface with and without coating, induced by a single laser pulse with a 1054 nm wavelength, 2.2 s duration, 7.75 mm spot and energy of 20-110 J. A holographic optical element was used for smoothing the drive beam spatially, but it induced small hotspots which initiated damage on the uncoated and coated surfaces. The individual damage effects of hotspots became less pronounced at high fluences. Due to high temperature and elevated non-hydrostatic stresses upon laser irradiation, damage occurred as fracture, spallation, basal and rhombohedral twinning, melting, vitrification, the formation of nanocrystalline phases, and solid-solid phase transition. The extent of damage increased with laser fluences. The formation of regular linear patterns with three-fold symmetry ( directions) upon fracture was due to rhombohedral twinning. Nanocrystalline -Al₂O₃ formed possibly from vapor deposition on the coated surface and manifested linear, triangular and spiral growth patterns. Glass and minor amounts of -Al₂O₃ also formed from rapid quenching of the melt on this side. The - to -Al₂O₃ transition was observed on the uncoated surface in some partially spalled alumina, presumably caused by shearing. The nominal threshold for laser-induced damage is about 47 J cm⁻² for these laser pulses, and it is about 94 J cm⁻² at the hotspots.     

Dissociative adsorption and thermal evolution of dichloroethylenes on Ni(1 0 0)

The room temperature (RT) adsorption and thermal evolution of cis- and trans-dichloroethylene (DCE) and their structural isomer, iso-DCE, on Ni(1 0 0) have been studied by vibrational electron energy loss spectroscopy (EELS), Auger electron spectroscopy (AES) and thermal desorption spectrometry (TDS). For RT adsorption, both cis- and trans-DCE exhibit very similar EELS features that are different from those found for iso-DCE. These differences indicate the formation of different fragments upon RT adsorption. In particular, the primary adspecies for cis- and trans-DCE are ethane-1,1,2,2-tetrayl () and acetylide-like () adspecies along with a small amount of chlorovinyl adspecies, while ethylylidyne () is the more plausible adspecies for iso-DCE. The differences in the adstructures upon dissociative adsorption at RT underline the important isomeric effects. Furthermore, both AES and TDS results for all three DCE isomers show that most of the Cl atoms produced by dechlorination remain on the surface and its surface concentration remains unchanged upon annealing the samples above 500 K. Upon further annealing to 550 K, the EELS spectra of all three isomers exhibit a broad feature near 1600 cm⁻¹, which suggests the formation of carbon clusters on the surface. The presence of surface Cl atoms therefore appears to prevent the CC bond cleavage during thermal evolution of the adspecies on Ni(1 0 0).     

Photoemission study of the Li/Ge(1 1 1)-3 × 1 reconstruction

In this article we report our findings on the electronic structure of the Li induced Ge(1 1 1)-3 × 1 reconstruction as determined by angle-resolved ultraviolet photoelectron spectroscopy (ARUPS) and core-level spectroscopy using synchrotron radiation. The results are compared to the theoretical honeycomb-chain-channel (HCC) model for the 3 × 1 reconstruction as calculated using density functional theory (DFT). ARUPS measurements were performed in both the and directions of the 1 × 1 surface Brillouin zone at photon energies of 17 and 21.2 eV. Three surface related states were observed in the direction. In the direction, at least two surface states were seen. The calculated band structure using the single-domain HCC model for Li/Ge(1 1 1)-3 × 1 was in good agreement with experiment, allowing for the determination of the origin of the experimentally observed surface states. In the Ge 3d core-level spectra, two surface related components were identified, both at lower binding energy with respect to the Ge 3d bulk peak. Our DFT calculations of the surface core-level shifts were found to be in fair agreement with the experimental results. Finally, in contrast to the Li/Si(1 1 1)-3 × 1 case, no double bond between Ge atoms in the top layer was found.     

Sub-Doppler high-resolution excitation spectroscopy of the S1 ← S0 transition of dibenzofuran

Rotationally resolved ultrahigh-resolution fluorescence excitation spectra of the S₁ ← S₀ transition of dibenzofuran have been observed using the technique of crossing a collimated molecular beam and the single-mode UV laser beam. 3291 rotational lines of the band and 3047 rotational lines of the band have been assigned. The band has been found to be a b-type transition, in which the transition moment is along the twofold symmetry axis of this molecule, and only the ΔK_a = ± 1 transitions were observed. The excited state is identified to be the S₁¹A₁(ππ^∗) state. In contrast with this, the band has been found to be an a-type transition in which the transition moment is along the long axis in plane. It indicates that the intensity of this vibronic band arises from vibronic coupling with the S₂¹B₂(ππ^∗) state. We determined the accurate rotational constants and the molecule have been shown to be planar both in the ground and excited states.     

ARPES measurements on Si(1 1 1) hole subband induced by Pb and Ga adsorption

The subband dispersions in the Si(1 1 1) p-type inversion layers induced by Pb and Ga adsorbed surface structures were measured by angle-resolved photoemission spectroscopy (ARPES). The surface structures used here were and Si(1 1 1)6.3 × 6.3-Ga. is a new surface phase found in this study. Because it is significant in our study to investigate potential effects of surface superstructures on the hole subband dispersion, we investigated the subband energy levels quantitatively comparing them with those calculated using the triangular approximation. It was found that the energy separation of the adjacent subband quantum levels in the inversion layers induced by gallium adsorption does not follow the triangular approximation. The possible band bending shape was proposed to explain the quantum level spacing of the subbands in Ga-induced inversion layers.