Thermoelastic behaviour of hexagonal graphite-like boron nitride

Abstract

A synchrotron X-ray diffraction study on hexagonal graphite-like boron nitride (h-BN) was performed under high pressures and temperatures. From the measured P-V-Trelation for h-BN (with a three-dimensional ordering parameter P₃ = 0.9) in the temperature range from 298 to 1273 K and up to 6.7 GPa, the thermoelastic parameters are derived by fitting a modified high temperature Birch-Murnaghan equation of state. The results are: bulk modulus B₀[GPa] = 27.6-0.0081(T[K]-298) and its pressure derivative B¹ = 10.5 + 0.0016(T [K] - 298). These values are for samples with P₃ = 0.9 and are quite different for samples with different values of the order parameter. This parameter is shown to have a leading role in the determination of the thermoelastic properties of h-BN, which explains and reconciles the differences between previous results.     

低温柱状等离子体传播特性的研究

分析了轴对称柱状等离子中波的传播特性,研究了表面波模式下的电磁波传播的色散关系,给出了波矢随等离子体参数、介电常数、结构尺寸、工作频率的变化曲线。结果表明,可以通过选择适当的等离子体参数、介电常数以及结构尺寸来控制波的传播特性。     

Mechanical properties of hexagonal boron nitride synthesized from film of Cu/BN mixture by surface segregation

Hexagonal boron nitride (h-BN) has a low friction coefficient and weak surface attractive force similar to graphite. Furthermore, while graphite is conductive, BN is a good insulator. These properties make it suitable for application like lubricating coating or as an insulator/buffer layer in electronic devices. The synthesize of h-BN layer by surface segregation phenomena and mechanical properties of the h-BN surface segregated on Cu substrate have been investigated. During in situ annealing, the surface segregation of BN occurred on Cu/BN film deposited by deposition process with a rf magnetron co-sputtering system. Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS) analysis showed that though the h-BN layer synthesized was not covered whole area of substrate but the h-BN layers partially covered substrate. And the concentration of oxygen on the surface after exposure in air is decreased with increase of BN concentration. The topography of atomic forces microscopy (AFM) showed that h-BN phases surface segregated are discontinuous droplet shape. The force curves of AFM and friction force of lateral force microscopy (LFM) showed that the h-BN droplet surface segregated have very weak attractive force and low friction coefficient equal to h-BN sintered plate.     

A comparative approach to predicting effective dielectric, piezoelectric and elastic properties of PZT/PVDF composites

The present study addresses the problem of quantitative prediction of effective relative permittivity, dielectric loss factor, piezoelectric charge coefficient, and Young's modulus of PZT/PVDF diphasic ceramic-polymer composite as a function of volume fraction of PZT in the different compositions. Theoretical results for effective relative permittivity derived from several dielectric mixture equations like those of Knott, Rother-Lichtenecker, Bruggeman, Maxwell-Wagner-Webmann-Skipetrov or Dias-Dasgupta, Furukawa, Lewin, Wiener, Jayasundere-Smith, Modified Cule-Torquato, Taylor, Poon-Shin and Rao et al. were fitted to the experimental data taken from previous works of Yamada et al. Similarly, the results for effective piezoelectric coefficient and Young's modulus, derived from different appropriate equations were fitted to the corresponding experimental data taken from the literature. The study revealed that only a few equations like modified Rother-Lichtenecker equation, Dias-Dasgupta equation and Rao equation for dielectric and piezoelectric properties while the four new equations developed in the present study of elastic property (Young's modulus) well fitted the corresponding experimental results. Further, the acceptable data put to various regression analyses showed that in most of the cases the third order polynomial regression analysis provided more acceptable fits.     

The effect of filler on the temperature coefficient of the relative permittivity of PTFE/ceramic composites

High permittivity and low-loss ceramic fillers have been prepared by means of the solid state ceramic route. Ceramic-filled composites were prepared by the Sigma Mixing, Extrusion, Calendering, which was followed by the Hot pressing (SMECH) process. The microwave dielectric properties of the composites were studied using X-band waveguide cavity perturbation technique. The temperature coefficient of the relative permittivity of the composites was investigated in the 0-100 °C temperature range using a hot and cold chamber coupled with an impedance analyzer. The temperature coefficient of the relative permittivity of the composites showed strong dependence on the temperature coefficient of the relative permittivity of the filler material. In the present study, a high-permittivity polymer/ceramic composite, having τ_εr ∼63 ppm/K, has been realized. This composite is suitable for outdoor wireless applications.     

On boundary conditions for the diffusion equation in room-acoustic prediction: Theory, simulations, and experiments

This paper proposes a modified boundary condition to improve the room-acoustic prediction accuracy of a diffusion equation model. Previous boundary conditions for the diffusion equation model have certain limitations which restrict its application to a certain number of room types. The boundary condition employing the Sabine absorption coefficient [V. Valeau et al., J. Acoust. Soc. Am. 119, 1504-1513 (2006)] cannot predict the sound field well when the absorption coefficient is high, while the boundary condition employing the Eyring absorption coefficient [Y. Jing and N. Xiang, J. Acoust. Soc. Am. 121, 3284-3287 (2007); A. Billon et al., Appl. Acoust. 69, (2008)] has a singularity whenever any surface material has an absorption coefficient of 1.0. The modified boundary condition is derived based on an analogy between sound propagation and light propagation. Simulated and experimental data are compared to verify the modified boundary condition in terms of room-acoustic parameter prediction. The results of this comparison suggest that the modified boundary condition is valid for a range of absorption coefficient values and successfully eliminates the singularity problem.     

Order parameter of layered superconducting structures

It is suggested that the order parameter and the critical temperature in an S-N structure be described on the basis of the microscopic Ψ theory, modeling the metal in the normal state by the Ginzburg-Landau equation with a negative coefficient a. It is shown that at a contact between layers the order parameter in the layer whose temperature is below the critical temperature induces an order parameter in the other layer whose temperature is higher than the critical temperature.     

Dependence of microwave absorption properties on ferrite volume fraction in MnZn ferrite/rubber radar absorbing materials

We report the analysis of measurements of the complex magnetic permeability (μ_r) and dielectric permittivity (ε_r) spectra of a rubber radar absorbing material (RAM) with various MnZn ferrite volume fractions. The transmission/reflection measurements were carried out in a vector network analyzer. Optimum conditions for the maximum microwave absorption were determined by substituting the complex permeability and permittivity in the impedance matching equation. Both the MnZn ferrite content and the RAM thickness effects on the microwave absorption properties, in the frequency range of 2-18 GHz, were evaluated. The results show that the complex permeability and permittivity spectra of the RAM increase directly with the ferrite volume fraction. Reflection loss calculations by the impedance matching degree (reflection coefficient) show the dependence of this parameter on both thickness and composition of RAM.     

Synthesis of hexagonal boron nitride films by dual temperature zone low-pressure chemical vapor deposition

Hexagonal boron nitride (h-BN) films are synthesized by dual temperature zone low-pressure chemical vapor deposition (LPCVD) through using a single ammonia borane precursor on non-catalytic c-plane Al₂O₃ substrates. The grown films are confirmed to be h-BN films by various characterization methods. Meanwhile, the growth rates and crystal quality of h-BN films at different positions in the dual temperature zone are studied. It is found that the growth rates and crystal quality of the h-BN films at different positions on the substrate are significantly different. The growth rates of the h-BN thin films show their decreasing trends with the rearward position, while the crystal quality is improved. This work provides an experimental basis for the preparation of large area wafer thick h-BN films by LPCVD.     

Radiation properties of a uniaxial chiral quadratic inhomogeneous slab under oblique incidence

In this paper, the focussing of the transmitted electromagnetic field through a quadric inhomogeneous slab of lossless uniaxial chiral medium is derived using transmission coefficient under oblique incidence. The inhomogeneity in the uniaxial chiral slab has been incorporated through permittivity parameter. Asymptotic ray theory provides valid field everywhere except at focal point where it gives infinite value. Singularity of the field at focal point is addressed using Maslov's method. The derived analytical field expressions at caustic or focal point of uniaxial quadratic inhomogeneous slab have been solved numerically using MATHEMATICA. The effects of chirality parameter, axial permittivity, transvers permittivity, angle of incidence on the refracted field are discussed and the effects of Brewster angle on the focussed field are also discussed. The results obtained using Maslov's method are compared with Huygens–Kirchhoff's integral which are in good agreement.     

Dependence of permittivity of diluted octanol on temperature

The dielectric constant of octanol diluted in decane, cyclohexane and carbon tetrachloride for different concentrations has been measured as a function of temperature. The experimental data were adjusted with a modified Onsager's equation to which a term that diminishes the dipolar interaction was added. This empirical equation has already been employed and published earlier for pentanol solutions in the same solvents. Good agreement has been found between experimental and predicted permittivity values and the results obtained for the diverse solvents used are compared and analysed, together with the parameters resulting from the fittings. The differences in behaviour between octanol and pentanol are analysed.     

Strain-tunable electronic and optical properties of h-BN/BC_3 heterostructure with enhanced electron mobility

By using first-principles calculation, we study the properties of h-BN/BC_3 heterostructure and the effects of external electric fields and strains on its electronic and optical properties. It is found that the semiconducting h-BN/BC_3 has good dynamical stability and ultrahigh stiffness, enhanced electron mobility, and well-preserved electronic band structure as the BC_3 monolayer. Meanwhile, its electronic band structure is slightly modified by an external electric field. In contrast,applying an external strain can mildly modulate the electronic band structure of h-BN/BC_3 and the optical property exhibits an apparent redshift under a compressive strain relative to the pristine one. These findings show that the h-BN/BC_3 hybrid can be designed as optoelectronic device with moderately strain-tunable electronic and optical properties.     

Impact of light absorption and temperature on self-focusing of zeroth-order Bessel–Gauss beams in a plasma with relativistic–ponderomotive regime

The influence of light absorption and temperature on self-focusing of zeroth-order Bessel–Gauss beams through plasma, with relativistic–ponderomotive regime, is investigated in this paper. The nonlinear differential equation for beam-width is established by using parabolic equation approach under Wentzel–Kramers–Brillouin (WKB) paraxial approximation and solved numerically. The numerical results show the effects of beam parameter, relative density plasma, intensity parameter, absorption coefficient and plasma electron temperature on self-focusing of zeroth-order Bessel–Gauss beams in plasma. The self-focusing of Gaussian beams in the considered plasma is also deduced as a particular case in the present work.     

Material parameter equation for rotating elliptical spherical cloaks

By using the coordinate transformation method, we have deduced the material parameter equation for rotating elliptical spherical cloaks and carried out simulation as well. The results indicate that the rotating elliptical spherical cloaking shell, which is made of meta-materials whose permittivity and permeability are governed by the equation deduced in this paper, can achieve perfect invisibility by excluding electromagnetic fields from the internal region without disturbing any external field.     

Effect of electric field on the dielectric permittivity of betaine phosphite crystals in the paraelectric phase

Temperature dependences of the dielectric permittivity of betaine phosphite crystals are studied both without and under application of an electric bias. It is shown that, in view of the fact that the high-temperature improper ferroelastic (antiferrodistorsive) phase transition at T _c1=355 K is nearly tricritical, the nonlinear temperature dependence of inverse dielectric permittivity in the paraelectric phase and the effect of the field on the dielectric permittivity can be described within a phenomenological model containing two coupled (polar and nonpolar) order parameters with a negative coupling coefficient. An analysis of the model revealed that, in the case where two phase transitions, a nonpolar and a ferroelectric one, can occur in the crystal, all of its dielectric properties, including the polarization response in a field, can be described by one dimensionless parameter a. For the crystal under study, we have a=?2.5. This value of the parameter corresponds to a second-order ferroelectric transition far from the tricritical point, at which a=?1. It is shown that the polarization response in the paraelectric phase in an electric field calculated within this model differs radically from that in the ferroelectric phase-transition model for which the Curie-Weiss law holds in the paraelectric phase.     

Effects of defects on heat conduction of graphene/hexagonal boron nitride heterointerface

We investigate the effects of point defects on the Interface Thermal Resistance (ITR) of graphene/hexagonal boron nitride (G/h-BN) heterointerface with various stacking forms by ultrafast thermal pulse method. The results reveal that the ITR of different stacking forms presents a significant downward trend with the existence of point defects. This counterintuitive behavior is attributed to the defects increase the vibration intensity of out-of-plane phonons of graphene in low-frequency region, thus enhancing the phonons coupling between graphene and h-BN layer. ITR of G/h-BN is further reduced by 50% with the defect rate increases from 0% to 5% and that is reduced by 65% with the temperature rises from 200 K to 700 K. Besides, it is found that the defective G/h-BN has thermal rectification characteristic and that is positively related to temperature and defect rate. Our study provides a practical way for the application of defects in graphene and a new approach for the design of thermal rectifier devices.     

Equations of state along the road to Arrott's last plot

A modification of the Weiss theory of ferromagnetism is used to create an approximate equation of state that relates the magnetization, field and temperature. The high-temperature susceptibility, the critical region and the temperature dependence of the spontaneous magnetization to low temperature are found by making an approximation for the inverse Brillouin function and then adding critical exponents in the proper places. The coefficient of the Weiss effective field is treated as dependent on the magnetization, introducing an additional parameter. This equation of state is applied to results from studies of iron whiskers.     

六方氮化硼的结晶度对合成立方氮化硼的影响

 将3种不同初始结晶度的六方氮化硼（h-BN）分别与Li₃N按一定比例混合,在低于立方氮化硼（c-BN）的合成温度和压力条件下,采用高温、高压预处理方式,使3种h-BN的结晶度发生改变。对不同预处理条件下得到的h-BN进行X射线衍射分析,确定了结晶度的变化程度。用不同结晶度的h-BN作为初始原料合成c-BN,观察并分析了h-BN向c-BN转化时微观结构的变化以及h-BN的结晶度对合成c-BN的影响。实验结果表明,结晶度低的h-BN更容易合成c-BN。     

Concentration and temperature dependent interaction studies using dielectric and thermodynamic methods on mixtures of anisole with o-toluidine and m-toluidine

Molecular interactions in mixtures of anisole with o-toluidine and anisole and m-toluidine have been studied at three different temperatures using the dielectric method with measurements of the static permittivity and permittivity at optical frequency. From the measured values, the Kirkwood correlation parameter, Bruggeman parameter, excess permittivity and thermodynamic excess free energy were computed for the mixtures. Positive and negative values of excess permittivity were obtained for both mixtures. The excess free energy for the anisole+o-toluidine mixture is positive at all three temperatures, whereas mixed values (positive and negative) are obtained for the anisole+m-toluidine mixture. Alignment of the dipoles in both mixtures was identified by Kirkwood factors. The investigation shows that the interaction between the components changes systematically with concentration and temperature and the change is minimum.     

A new method to measure permittivity and permeability in nanopowder materials in microwave range

A new method for measuring the electromagnetic properties (permittivity and permeability) of nanopowder materials in a wide microwave region is presented. Unlike previously developed systems, our experimental setup is based on reflection measurements over a short-circuited transmission line combined with the application of a uniform magnetostatic field. When this field is sufficiently high to saturate the material, the effective permeability of the sample equals the permeability of free space, without modifying its electrical properties. Hence, for each frequency, the permittivity can be obtained through the measurement of a single scattering parameter, such as the reflection coefficient. After this first measurement, and once the external field is removed, the reflection coefficient can be used again to obtain the permeability by means of the permittivity value obtained before. As the major advantage, this procedure allows the recording of the experimental data in just one sweep, using one-port measurements, and without modifying the geometrical characteristics of the sample holder. Hence, the measurement process can be easily automated.