First-principles study of mechanical stability and thermal properties of MNNi₃ （M=Zn,Mg,Al） under pressure

The mechanical stability,elastic,and thermodynamic properties of the anti-perovskite superconductors MNNi 3(M=Zn,Mg,Al) are investigated by means of the first-principles calculations.The calculated structural parameters and elastic properties of MNNi 3 are in good agreement with the experimental and the other theoretical results.From the elastic constants under high pressure,we predict that ZnNNi 3,MgNNi 3,and AlNNi 3 are not stable at the pressures above 61.2 GPa,113.3 GPa,and 122.4 GPa,respectively.By employing the Debye model,the thermodynamic properties,such as the heat capacity and the thermal expansion coefficient,under pressures and at finite temperatures are also obtained successfully.     

First-principles investigation on the structural and elastic properties of cubic-Fe,TiAl under high pressures

The structural, elastic, and thermodynamic properties of cubic-Fe2TiA1 under high temperatures and pressures are investigated by performing ab initio calculation and using the quasi-harmonic Debye model. Some ground state properties such as lattice constant, bulk modulus, pressure derivative of the bulk modulus, and elastic constants are in good agreement with the available experimental results and theoretical data. The thermodynamic properties of Fe2TiA1 such as thermal expansion coefficient, Debye temperature, and heat capacity in ranges of 0 K-1200 K and 0 GPa-250 GPa are also obtained. The calculation results indicate that the heat capacities at different pressures all increase with temperature increasing and are close to the Dulong-Petit limit at higher temperatures, Debye temperature decreases with temperature increasing, and increases with pressure rising. The cubic-FezTiA1 is stable mechanically under 250 GPa. Moreover, under lower pressure, thermal expansion coefficient rises rapidly with temperature increasing, and the increasing rate becomes slow at higher pressure.     

Theoretical Calculations for Structural, Elastic and Thermodynamic Properties of γTiAl Under High Pressure

We investigate the structural and elastic properties of γTiAl under high pressures using the norm-conserving pseudopotentials within the local density approximation （LDA） in the frame of density functional theory. The calculated pressure dependence of the elastic constants is in excellent agreement with the experimental results. The elastic constants and anisotropy as a function of applied pressure are presented. Through the quasi-harmonic Debye model, we also investigate the thermodynamic properties of γTiAl.     

High-pressure phonon dispersion of copper by using the modified analytic embedded atom method

By using the Born-von Krmn theory of lattice dynamics and the modified analytic embedded atom method, we reproduce the experimental results of the phonon dispersion in fcc metal Cu at zero pressure along three high symmetry directions and four off-symmetry directions, and then simulate the phonon dispersion curves of Cu at high pressures of 50, 100, and 150 GPa. The results show that the shapes of dispersion curves at high pressures are very similar to that at zero pressure. All the vibration frequencies of Cu in all vibration branches at high pressures are larger than the results at zero pressure, and increase correspondingly as pressure reaches 50, 100, and 150 GPa sequentially. Moreover, on the basis of phonon dispersion, we calculate the values of specific heat of Cu at different pressures. The prediction of thermodynamic quantities lays a significant foundation for guiding and judging experiments of thermodynamic properties of solids under high pressures.     

First-principle investigation on the thermodynamics of X_2N_2O(X = C,Si, Ge) compounds

The structures under different pressures, elastic properties, electronic structures and lattice vibrations of the X_2N_2O(X = C, Si, Ge) compounds are investigated by using the first-principle method. Based on the phonon density of state,the thermodynamic properties of the present compounds are studied under different pressures and at different temperatures. The structural parameters including the bond lengths and bond angles are in agreement with available experimental measurements and theoretical calculations. We employ the elastic theory to calculate the nine independent elastic constants(C_(ij)) and the derived elastic moduli(B, G, E, v). Results indicate that these X_2N_2O(X = C, Si, Ge) compounds are mechanically stable and show the brittle behaviors. The electronic properties of the present compounds are analyzed by using the band structure and density of states. The phonon dispersion calculations imply that the present compounds are dynamically stable. Based on the quasi-harmonic approximation, the calculations of the specific heat indicate that the temperature in a range of 0 K–1500 K and pressure in a range of 0 GPa–40 GPa have a large effect on the thermal quantities of Ge_2N_2O,compared with on those of the C_2N_2O and Si_2N_2O compounds.     

Predictions of pressure-induced structural transition, mechanical and thermodynamic properties of α-and β-Si3N4 ceramics: ab initio and quasi-harmonic Debye modeling

The plane-wave pseudo-potential method within the framework of ab initio technique is used to investigate the structural and elastic properties of α-and β-Si3N4.The ground-state parameters accord quite well with the experimental data.Our calculation reveals that α-Si3N4 can retain its stability to at least 40 GPa when compressed at 300 K.The α→β phase transformation would not occur in a pressure range of 0-40 GPa and a temperature range of 0-300 K.Actually,the α→β transition occurs at 1600 K and 7.98 GPa.For α-and β-Si3N4,the c axes are slightly more incompressible than the a axes.We conclude that β-Si3N4 is a hard material and ductile in nature.On the other hand,β-Si3N4 is also found to be an ionic material and can retain its mechanical stability in a pressure range of 0-10 GPa.Besides,the thermodynamic properties such as entropy,heat capacity,and Debye temperature of α-and β-Si3N4 are determined at various temperatures and pressures.Significant features in these properties are observed at high temperature.The calculated results are in good agreement with available experimental data and previous theoretical values.Many fundamental solid-state properties are reported at high pressure and high temperature.Therefore,our results may provide useful information for theoretical and experimental investigations of the Si3N4 polymorphs.     

Predictions of pressure-induced structural transition,mechanical and thermodynamic properties of α-and β-Si₃N₄ ceramics:ab initio and quasi-harmonic Debye modeling

The plane-wave pseudo-potential method within the framework of ab initio technique is used to investigate the structural and elastic properties of α-and β-Si3N4.The ground-state parameters accord quite well with the experimental data.Our calculation reveals that α-Si3N4 can retain its stability to at least 40 GPa when compressed at 300 K.The α→β phase transformation would not occur in a pressure range of 0-40 GPa and a temperature range of 0-300 K.Actually,the α→β transition occurs at 1600 K and 7.98 GPa.For α-and β-Si3N4,the c axes are slightly more incompressible than the a axes.We conclude that β-Si3N4 is a hard material and ductile in nature.On the other hand,β-Si3N4 is also found to be an ionic material and can retain its mechanical stability in a pressure range of 0-10 GPa.Besides,the thermodynamic properties such as entropy,heat capacity,and Debye temperature of α-and β-Si3N4 are determined at various temperatures and pressures.Significant features in these properties are observed at high temperature.The calculated results are in good agreement with available experimental data and previous theoretical values.Many fundamental solid-state properties are reported at high pressure and high temperature.Therefore,our results may provide useful information for theoretical and experimental investigations of the Si3N4 polymorphs.     

Mechanical and thermodynamic properties of cubic YH_2 under high pressure:Prediction from first-principles study

First-principles calculations are used to investigate the mechanical and thermodynamic properties of cubic YH2 at different pressures and temperatures. The generalized gradient approximation （GGA） with Perdew-Burke-Ernzerhof （PBE） method is used to describe the exchange-correlation energy in the present work. The calculated equilibrium lattice constant a and bulk modulus B are in good accordance with the available experimental values. According to the Born-Huang criteria for mechanical stability, elastic constants are calculated from the strain-induced stress method in a pressure range from 0 to 67.1 GPa. Isotropic wave velocities and sound velocities are discussed in detail. It is found that the Debye temperature decreases monotonically with the increase of pressure and that YH2 has low anisotropy in both longitudinal and shear-wave velocities. The calculated elastic anisotropic factors indicate that YH2 has low anisotropy at zero pressure and that its elastic anisotropy increases as pressure increases. Through the quasi-harmonic Debye model, in which phononic effects are considered, the thermodynamic properties of YH2, such as the relations of （V-Vo）/Vo to the temperature and the pressure, the dependences of heat capacity Cv and thermal expansion coefficient a on temperature and pressure ranging from 0 to 2400 K and from 0 to 65 GPa, respectively, are also discussed.     

mechanical and thermodynamic properties of α-and β-Si3N4 ceramics： ab initio and quasi-harmonic Debye modeling

The plane-wave pseudo-potential method within the framework of ab initio technique is used to investigate the structural and elastic properties of α-and β-Si3N4. The ground-state parameters accord quite well with the experimental data. Our calculation reveals that α-Si3N4 can retain its stability to at least 40 GPa when compressed at 300 K. The α → β phase transformation would not occur in a pressure range of 0-40 （3Pa and a temperature range of 0 300 K. Actually, the α → β transition occurs at 1600 K and 7.98 GPa. For α-and β-Si3N4, the c axes are slightly more incompressible than the a axes. We conclude that β-Si3N4 is a hard material and ductile in nature. On the other hand, β-Si3N4 is also found to be an ionic material and can retain its mechanical stability in a pressure range of 0 - 010 GPa. Besides, the thermodynamic properties such as entropy, heat capacity, and Debye temperature of α-and β-Si3N4 are determined at various temperatures and pressures. Significant features in these properties are observed at high temperature. The calculated results are in good agreement with available experimental data and previous theoretical values. Many fundamental solid-state properties are reported at high pressure and high temperature. Therefore, our results may provide useful information for theoretical and experimental investigations of the Si3N4 polymorphs.     

First-principles investigation of the electronic, elastic and thermodynamic properties of VC under high pressure

An investigation of the electronic,elastic and thermodynamic properties of VC under high pressure has been conducted using first-principles calculations based on density functional theory (DFT) with the plane-wave basis set,as implemented in the CASTEP code. At elevated pressures,VC is predicted to undergo a structural transition from a relatively open NaCl-type structure to a more dense CsCl-type one. The predicted transition pressure is 520 GPa. The elastic constant,Debye temperature and heat capacity each as a function of pressure and/or temperature of VC are presented for the first time.     

First principles study of structural,phonon, optical,elastic and electronic properties of Y3Al5O12

Structural, phonon, optical, elastic and electronic properties of Y₃Al₅O₁₂ have been investigated by means of the first principles method with the Cambridge Serial Total Energy Package (CASTEP) code based on the density functional theory. The calculated lattice parameters, valence charge density, bond length and single crystal elastic properties at zero pressure are in good agreement with the available experimental data. The close agreement with the experimental values provides a good confirmation of the reliability of the calculations. Optical, elastic and phonon properties of Y₃Al₅O₁₂ under pressures are performed. The results that are obtained show the changes of optical and elastic properties under the influence of applied pressure, and proving the dynamical stability of YAG are destructed when applied pressure up to 7 GPa. Moreover, polycrystalline elastic moduli are deduced according to the Reuss assumption. Those elastic constants provide important parameters that describe reliability of both physical model and engineering application at the atomistic level. The result of the density of states explains the nature of the electronic band structure.     

The under-pressure behaviour of mechanical,electronic and optical properties of calcium titanate and its ground state thermoelectric response

Abstract

In this study, the elastic, electronic, optical and thermoelectric properties of CaTiO₃ perovskite oxide have been investigated using first-principles calculations. The generalised gradient approximation (GGA) has been employed for evaluating structural and elastic properties, while the modified Becke Johnson functional is used for studying the optical response of this compound. In addition to ground state physical properties, we also investigate the effects of pressure (0, 30, 60, 90 and 120 GPa) on the electronic structure of CaTiO₃. The application of pressure from 0 to 90 GPa shows that the indirect band gap (Γ-M) of CaTiO₃ increases with increasing pressure and at 120 GPa it spontaneously decreases transforming cubic CaTiO₃ to a direct (Γ-Γ) band gap material. The complex dielectric function and some optical parameters are also investigated under the application of pressures. All the calculated optical properties have been found to exhibit a shift to the higher energies with the increase of applied pressure suggesting potential optoelectronic device applications of CaTiO₃. The thermoelectric properties of CaTiO₃ have been computed at 0 GPa in terms of electrical conductivity, thermal conductivity and Seebeck coefficient.     

First-principles study of structural,elastic, electronic and optical properties of RDX under pressure

ABSTRACT

The influences of pressure on structural, elastic, electronic and optical properties of α-RDX under pressure from 0 to 40?GPa have been investigated by performing first-principles calculations. The obtained structural parameters based on the GGA-PBE+G calculations are consistent with previous experimental values. The results of B/G, C₁₂-C₄₄ and Poisson's ratio show that α-RDX has changed to ductility under pressure between 0 and 5?GPa. The obvious rotation of NO₂ group in the equatorial position appears, especially in the range of pressure from 10 to 15?GPa, which influences the elastic and mechanical properties of α-RDX. Moreover, we find that the electrons of α-RDX become more active under higher pressure by comparing the curves of DOS under different pressure. Furthermore, the anisotropy of optical properties under different pressures has been shown.     

高压下TiC的弹性、电子结构及热力学性质的第一性原理计算

利用基于密度泛函理论的第一性原理平面波赝势方法 并结合准谐徳拜模型研究了NaCl结构的TiC在高压下的弹性性质、电子结构和热力学性质. 计算所得零温零压下的晶格常数、体弹模量及弹性常数与实验值符合得很好. 零温下弹性常数和弹性模量随压强增大而增大. 通过态密度和电荷密度的分析, Ti-C键随压强增大而增强. 运用准谐德拜模型, 成功计算了TiC在高温高压下的体弹模量、熵、热膨胀系数、徳拜温度、 Grüneisen参数和比热容. 结果表明压强对体弹模量、热膨胀系数和徳拜温度的影响大于温度对其的影响. 热容随着压强升高而减小, 在高温高压下, 热容接近Dulong-Petit极限.     

The structural, elastic and thermodynamic properties of thorium tetraboride

The structural, elastic and thermodynamic properties of thorium tetraboride (ThB₄) have been investigated by using first-principles plane-wave pseudopotential density functional theory with generalized gradient approximation. The behaviors of structural parameters under 0-70 GPa hydrostatic pressure are studied by means of Broyden, Fletcher, Goldfarb, and Shanno (BFGS) geometry optimization scheme. By using the stress-strain method, single crystal elastic constants are calculated to test the mechanical stability of the crystal structure and to determine mechanical properties such as bulk modulus at each pressure. However, in order to study the thermodynamic properties of ThB₄, the quasi-harmonic Debye model is used. Then, the dependencies of bulk modulus, heat capacities, thermal expansions, Grüneisen parameters and Debye temperatures on the temperature and pressure are obtained in the whole pressure range 0-70 GPa and temperature range 0-1500 K.     

First-principles investigation on vibrational,anisotropic elastic and thermodynamic properties for L12 structure of Al3Er and Al3Yb under high pressure

To better clarify the physical properties for Al₃RE precipitates, first-principles calculations are performed to investigate the vibrational, anisotropic elastic and thermodynamic properties of Al₃Er and Al₃Yb. The calculated results agree well with available experimental and theoretical ones. The vibrational properties indicate that Al₃Er and Al₃Yb will keep their dynamical stabilities with L1₂ structure up to 100 GPa. The elastic constants are satisfied with mechanical stability criteria up to the external pressure of 100 GPa. The mechanical anisotropy is predicted by anisotropic constants A^G, A^U, A^Z and 3D curved surface of Young’s modulus. The calculated results show that both Al₃Er and Al₃Yb are isotropic at zero pressure and obviously anisotropic under high pressure. Further, we systematically investigate the thermodynamic properties and provide the relationships between thermal parameters and pressure. Finally, the pressure-dependent behaviours of density of states, Mulliken charge and bond length are discussed.     

Structural,elastic, thermodynamic and electronic properties of LuX (X = N,Bi and Sb) compounds: first principles calculations

ABSTRACT

The structural, electronic, elastic and thermodynamic properties of LuX (X = N, Bi and Sb) based on rare earth into phases, Rocksalt (B1) and CsCl (B2) have been investigated using full-potential linearized muffin-tin orbital method (FP-LMTO) within density functional theory. Local density approximation (LDA) for exchange-correlation potential and local spin density approximation (LSDA) are employed. The structural parameters as lattice parameters a₀, bulk modulus B, its pressure derivate B’ and cut-off energy (E_c) within LDA and LSDA are presented. The elastic constants were derived from the stress–strain relation at 0 K. The thermodynamic properties for LuX using the quasi-harmonic Debye model are studied. The temperature and pressure variation of volume, bulk modulus, thermal expansion coefficient, heat capacities, Debye temperature and Gibbs free energy at different pressures (0–50 GPa) and temperatures (0–1600 K) are predicted. The calculated results are in accordance with other data.     

First-principles study of structural and elastic properties of CrO2 at high pressure

The structural and elastic properties of CrO₂ in the rutile phase under high pressures have been investigated using pseudopotential plane-wave method based on density functional theory. The optimized lattice parameters and the bulk modulus at zero pressure agree well with available experimental and theoretical data. The elastic constants C ₁₁, C ₁₂, C ₄₄, C ₃₃, C ₁₃, and C ₆₆ at zero pressure are calculated to be 359.91, 264.69, 143.28, 309.45, 218.45, and 260.74 GPa, respectively. Elastic constants, bulk modulus, shear modulus, Young's modulus, and Poisson's ratio under pressures are obtained. Our results indicate that the rutile phase is mechanically stable below 11.99 GPa. The elastic anisotropy of rutile phase under pressures has also been predicted.     

First-principles investigations on structural,elastic, electronic properties and Debye temperature of orthorhombic Ni3Ta under pressure

The structural, elastic, electronic properties and Debye temperature of Ni₃Ta under different pressures are investigated using the first-principles method based on density functional theory. Our calculated equilibrium lattice parameters at 0 GPa well agree with the experimental and previous theoretical results. The calculated negative formation enthalpies and elastic constants both indicate that Ni₃Ta is stable under different pressures. The bulk modulus B, shear modulus G, Young’s modulus E and Poisson’s ratio ν are calculated by the Voigt–Reuss–Hill method. The bigger ratio of B/G indicates Ni₃Ta is ductile and the pressure can improve the ductility of Ni₃Ta. In addition, the results of density of states and the charge density difference show that the stability of Ni₃Ta is improved by the increasing pressure. The Debye temperature Θ _D calculated from elastic modulus increases along with the pressure.