Chemisorption of 1,1-dichloroethene on the Si(1 1 1)-7 × 7 surface

Chemisorption of 1,1-dichloroethene (Cl₂CCH₂) to a Si(1 1 1)-7 × 7 surface was studied by means of X-ray photoelectron spectroscopy using synchrotron radiation, recording chlorine 2p and carbon 1s spectra. For carbon 1s, spectral assignment of the chemisorbed species is based on quantum chemical calculations of chemical shifts in model compounds.The results confirm the identity of covalently bonded 1-chlorovinyl (-CClCH₂) and vinylidene (CCH₂) adspecies. Upon chemisorption at room temperature it was found that about one-third of the molecules break one C-Cl bond while about two-thirds of the adsorbates break two C-Cl bonds. We do not, however, find evidence for isomerization of CCH₂ to di-bonded vinylene (-CHCH-).     

Selective surface chemistry of allyl alcohol and allyl aldehyde on Si(1 0 0)2×1: Competition of [2 + 2] CC cycloaddition with O-H dissociation and with [2 + 2] CO cycloaddition in bifunctional molecules

Competition between the CC functional group with the OH group in allyl alcohol and with the CO group in allyl aldehyde in the adsorption and thermal chemistry on Si(1 0 0)2×1 has been studied by X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption (TPD), as well as density-functional theory (DFT) calculations. The similarities found in the C 1s and O 1s spectra for both molecules indicate that the O-H dissociation product for allyl alcohol and [2 + 2] CO cycloaddition product for allyl aldehyde are preferred over the corresponding [2 + 2] CC cycloaddition products. Temperature-dependent XPS and TPD studies further show that thermal evolution of these molecules gives rise to the formation of ethylene, acetylene, and propene on Si(1 0 0)2×1, with additional CO evolution only from allyl alcohol. The formation of these desorption products also supports that the [2 + 2] CC cycloaddition reaction does not occur. In addition, the formation of SiC at 1090 K is observed for both allyl alcohol and allyl aldehyde. We propose plausible surface-mediated reaction pathways for the formation of these thermal evolution products. The present work illustrates the crucial role of the Si(1 0 0)2×1 surface in selective reactions of the Si dimers with the O−H group in allyl alcohol and with the CO group in allyl aldehyde over the CC functional group common to both molecules.     

Reaction of acetonitrile with the silicon(0 0 1) surface: A combined XPS and FTIR study

The adsorption of acetonitrile on the Si(0 0 1) surface has been investigated using X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR). XPS and FTIR spectra indicate that adsorbed acetonitrile forms two correlated binding configurations, a CN species with a strong FTIR absorption at 1540 cm⁻¹ and a CCN (ketenimine) species that has a very strong FTIR absorption at 1952 cm⁻¹. The CCN FTIR peak at 1952 cm⁻¹ shows a striking polarization dependence, with the infrared transition dipole almost entirely in the plane of the sample and parallel to the SiSi dimer axis. Our data suggests that the primary CCN structure results from cleavage of two C-H bonds, forming a structure in which the N and terminal C atom are both linked to the surface. Temperature-dependent experiments help to elucidate the complicated reaction mechanism for acetonitrile adsorbing onto the Si(0 0 1) surface. Dosing at higher temperature increases the amount of CCN relative to CN species while heating leads to direct transformation of the CN to the CCN species. Our results indicate that previous studies, which considered only products formed by cleavage of a single C-H bond, have misidentified the primary ketenimine product. A reinterpretation of the earlier results, combined with data presented here, sheds new light onto the products and mechanism of interaction of acetonitrile with Si(0 0 1).     

Conformational isomers of stilbene on Si(1 0 0)

Stilbene (1,2-diphenylethylene) has shown an intriguing isomerisation behavior and may serve as a model system for “molecular switches” incorporating a CC double bond. To evaluate the possible use of such molecules as molecular switches on semiconductor surfaces, the adsorption of cis- and trans-stilbene on Si(1 0 0) has been investigated. Identification of both isomers is achieved by differences in adsorption geometry as revealed by NEXAFS, and differences in electronic structure in the occupied and unoccupied molecular orbitals. For both isomers, bonding takes place via the CC double bond to the Si dimer atoms allowing for free movement of the aromatic rings, a necessary prerequisite for photoinduced isomerisation on the surface. Our experimental results agree well with theoretical calculations.     

Chemistry of l-proline on Pd(1 1 1): Temperature-programmed desorption and X-ray photoelectron spectroscopic study

The surface chemistry of proline is explored on Pd(1 1 1) using a combination of temperature-programmed desorption (TPD) and X-ray photoelectron spectroscopy. Proline adsorbs on Pd(1 1 1) at temperatures of 250 K and below into second and subsequent layers prior to the saturation of the first layer, where approximately 70% of the adsorbed proline is present in its zwitterionic form. Molecular proline desorbs between ∼315 K and ∼333 K depending on coverage. When adsorbed at ∼300 K, only the first monolayer is formed, and the proline is present as zwitterions, oriented such that all of the carbons are detected equally by XPS. Proline decomposes by scission of the C-COO bond, where the carboxylate moiety desorbs as carbon monoxide and carbon dioxide, while the nitrogen-containing moiety desorbs as to HCN, and evolves pyrrole at ∼390 K, pyrrolidine at ∼410 K, and final species that desorbs at ∼450 K that cannot be unequivocally assigned but may be 2-butenenitrile (CH₃-CHCH-CN), 3-butenenitrile (CH₂CH-CH₂-CN), 2-methyl-2-propenenitrile (CH₂C(CH₃)-CN) or cyclopropanecarbonitrile.     

Isomeric effects on room-temperature chemisorption and thermal evolution of iso-, cis- and trans-dichloroethylene on Si(1 1 1)7 × 7

The room-temperature adsorption and thermal evolution of iso-, cis- and trans-dichloroethylene (DCE) on Si(1 1 1)7 × 7 have been studied by vibrational electron energy loss spectroscopy and thermal desorption spectrometry (TDS). The presence of the Si-Cl stretch at 510 cm⁻¹ suggests that, upon adsorption, all three isomers dissociate via C-Cl bond breakage on the 7 × 7 surface to form mono-σ bonded chlorovinyl , which could, in the case of iso-DCE, further dechlorinate to vinylidene (:CCH₂) upon insertion into the back-bond. The higher saturation exposure for the Si-Cl stretch at 510 cm⁻¹ observed for cis- and trans-DCE than iso-DCE suggests that Cl dissociation via the CHCl group in the cis and trans isomers is less readily than the CCl₂ group in iso-DCE. Our TDS data show remarkable similarities in both molecular desorption near 360 K and thermal evolution of the respective adstructures for all three isomers on Si(1 1 1)7 × 7. In particular, upon annealing to 450 K, the mono-σ bonded chlorovinyl adspecies is found to further dechlorinate to either vinylene di-σ bonded to the Si surface or acetylene to be released from the surface. Above 580 K, vinylene could also become gaseous acetylene or undergo H abstraction to produce hydrocarbon or SiC fragments. All three DCE isomers also exhibit TDS features attributable to an etching product SiCl₂ at 800-950 K and recombinative desorption products HCl at 700-900 K and H₂ at 650-820 K. The stronger Cl-derived TDS signals and Si-Cl stretch at 510 cm⁻¹ over 450-820 K for trans-DCE than those for cis-DCE indicate stronger dechlorination for trans-DCE than cis-DCE, which could be due to less steric hindrance resulting from the formation of the chlorovinyl adspecies for trans-DCE during the initial adsorption/dechlorination process. Finally, our density functional calculations qualitatively support the thermodynamic feasibility and relative stabilities of the proposed adstructures involving chlorovinyl, vinylidene, and vinylene adspecies.     

Formamide reactions on rutile TiO2(0 1 1) surface

The reaction of formamide over the (0 1 1) faceted TiO₂(0 0 1) surface has been studied by Temperature Programmed Desorption (TPD) and X-ray Photoelectron Spectroscopy (XPS). Two main reactions were observed: dehydration to HCN and H₂O and decomposition to NH₃ and CO. The dehydration reaction was found to be three to four times larger than the decomposition at all coverages. Each of these reactions is found to occur in two temperature domains which are dependent upon surface coverage. The low temperature pathway (at about 400 K) is largely insensitive to surface coverage while the high temperature pathway (at about 500 K) shifts to lower temperatures with increasing surface coverage. These two temperature pathways may indicate two adsorption modes of formamide: molecular (via an η¹(O) mode of adsorption) and dissociative (via an η²(O,N) mode of adsorption). C1s and N1s XPS scans indicated the presence of multiple species after formamide absorption at 300 K. These occurred at ca. 288.5 eV (-CONH-) and 285 eV (sp³/sp² C) for the C1s and 400 eV-(NH₂), 398 eV (-NH) and 396 eV (N) for the N1s and result from further reaction of formamide with the surface.     

DFT calculations of XPS/NEXAFS and IR spectra to elucidate the reaction products of acetonitrile with Si(0 0 1)-2 × 1

NEXAFS data [S. Rangan et al., Phys. Rev. B 71 (2005) 165319] and FTIR data [M.P. Schwartz, R.J. Hamers, Surf. Sci. 601 (2007) 945] apparently do not converge in the identification of the reaction products of acetonitrile (CH₃CN) with Si(0 0 1)-2 × 1 at room temperature. Using DFT calculations of core-excited/core-ionized spectra and of IR vibrational frequencies and intensities, we show the consistency of the body of experimental data. Three species are present on the surface in equivalent amounts, a CN moiety, a pendent CN and a CCN ketenimine submitted to a strong twist imposed by the Si bond directionality. More generally, the paper shows the usefulness of spectroscopic data simulations in the elucidation of complex surface chemistry problems.     

Site-blocking effects of preadsorbed H on Pt(1 1 1) probed by 1,3-butadiene adsorption and reaction

The influence of hydrogen coadsorption on hydrocarbon chemistry on transition metal surfaces is a key aspect to an improved understanding of catalytic selective hydrogenation. We have investigated the effects of H preadsorption on adsorption and reaction of 1,3-butadiene (H₂CCHCHCH₂, C₄H₆) on Pt(1 1 1) surfaces by using temperature-programmed desorption (TPD) and Auger electron spectroscopy (AES). Preadsorbed hydrogen adatoms decrease the amount of 1,3-butadiene chemisorbed on the surface and chemisorption is completely blocked by the hydrogen monolayer (saturation) coverage (θ_H = 0.92 ML). No hydrogenation products of reactions between coadsorbed H adatoms and 1,3-butadiene were observed to desorb in TPD experiments over the range of θ_H investigated (θ_H = 0.6-0.9 ML). This is in strong contrast to the copious evolution of ethane (CH₃CH₃, C₂H₆) from coadsorbed hydrogen and ethylene (CH₂CH₂, C₂H₄) on Pt(1 1 1). Hydrogen adatoms effectively (in a 1:1 stoichiometry) remove sites from interaction with chemisorbed 1,3-butadiene, but do not affect adjacent sites. The adsorption energy of coadsorbed 1,3-butadiene is not affected by the presence of hydrogen on Pt(1 1 1). The chemisorbed 1,3-butadiene on hydrogen preadsorbed Pt(1 1 1) completely dehydrogenates to H₂ and surface carbon upon heating without any molecular desorption detected, which is identical to that observed on clean Pt(1 1 1). In addition to revealing aspects of site blocking that should have broad implications for hydrogen coadsorption with hydrocarbon molecules on transition metal surfaces in general, these results also provide additional basic information on the surface science of selective catalytic hydrogenation of butadiene in butadiene-butene mixtures.     

c-C5H5 on a Ni(1 1 1) surface: Theoretical study of the adsorption, electronic structure and bonding

In the present work the ASED-MO method is applied to study the adsorption of cyclopentadienyl anion on a Ni(1 1 1) surface. The adsorption with the centre of the aromatic ring placed above the hollow position has been identified to be energetically the most favourable. The aromatic ring remains almost flat, the H atoms are tilted 17° away from the metal surface. We modelled the metal surface by a two-dimensional slab of finite thickness, with an overlayer of c-C₅H₅⁻, one c-C₅H₅⁻ per nine surface Ni atoms. The c-C₅H₅⁻ molecule is attached to the surface with its five C atoms bonding mainly with three Ni atoms. The NiNi bond in the underlying surface and the CC bonds of c-C₅H₅⁻ are weakened upon adsorption. We found that the band of Ni 5dz² orbitals plays an important role in the bonding between c-C₅H₅⁻ and the surface, as do the Ni 6s and 6p_z bands.     

Interaction of 2,2,6,6-tetramethyl-3,5-heptanedione with the Si(1 0 0)-2 × 1 surface: Scanning tunneling microscopy and density functional theory study

Room temperature adsorption and reaction of 2,2,6,6-tetramethyl-3,5-heptanedione (dpmH) on the Si(1 0 0)-2 × 1 surface has been studied with ultra-high vacuum scanning tunneling microscopy (UHV-STM) and temperature programmed desorption (TPD). The molecule is found to chemisorb as a mixture of at least five distinct species. Density functional theory (DFT) was used to calculate the structures and adsorption energies of 12 possible addition products. Unique bonding assignments for each experimental feature are proposed by consideration of a common intermediate reaction network, and a comparison of possible reaction pathways leading to the final products. These assignments are: OH inter-dimer dissociation, OH intra-dimer dissociation, 1,5 intra-dimer addition, 1,5 inter-dimer addition, and intra-dimer [2 + 2]CO addition with OH dissociation on an adjacent dimer. TPD and STM results show that the molecule dissociates completely upon annealing to 700 °C with formation of the c(4 × 4) phase at low exposures, and SiC islands for exposures exceeding 0.15 L.     

Structure, defects, and impurities at the rutile TiO2(0 1 1)-(2 × 1) surface: A scanning tunneling microscopy study

The titanium dioxide rutile (0 1 1) (equivalent to (1 0 1)) surface reconstructs to a stable (2 × 1) structure upon sputtering and annealing in ultrahigh vacuum. A previously proposed model (T.J. Beck, A. Klust, M. Batzill, U. Diebold, C. Di Valentin, A. Selloni, Phys. Rev. Lett. 93 (2004) 036104/1) containing onefold coordinated oxygen atoms (titanyl groups, TiO) is supported by Scanning Tunneling Microscopy (STM) measurements. These TiO sites are imaged bright in empty-states STM. A few percent of these terminal oxygen atoms are missing at vacuum-annealed surfaces of bulk-reduced samples. These O vacancies are imaged as dark spots. Their number density depends on the reduction state of the bulk. Double vacancies are the most commonly observed defect configuration; single vacancies and vacancies involving several O atoms are present as well. Formation of oxygen vacancies can be suppressed by annealing a sputtered surface first in vacuum and then in oxygen; annealing a sputtered surface in oxygen results in surface restructuring and a (3 × 1) phase. Anti-phase domain boundaries in the (2 × 1) structure are active adsorption sites. Segregation of calcium impurities from the bulk results in an ordered overlayer that exhibits domains with a centered (2 × 1) periodicity in STM.     

The chemistry of C2 perfluoroalkyl iodide on the Cu(1 1 1) single crystal surface

The thermal chemistry of perfluoroethyl iodide (C₂F₅I) adsorbed on Cu(1 1 1) has been investigated by temperature-programmed reaction/desorption (TPR/D), reflection-absorption infrared spectroscopy (RAIRS), and X-ray photoelectron spectroscopy (XPS). I 4d and F 1s XPS spectra show that dissociative adsorption of C₂F₅I to form the surface-bound perfluroethyl (Cu-C₂F₅) moieties occurs at very low temperature (T < 90 K), while the C-F bond cleavage in adsorbed perfluroethyl (Cu-C₂F₅) begins at ca. 300 K. XPS and TPR/D studies further reveal that the reactions of ^βCF₃^αCF_2(ad) on Cu(1 1 1) are strongly dependent on the surface coverage. At high coverages (?0.16 L exposure), the adsorbed perfluroethyl (Cu-C₂F₅) evolves, via α-F elimination, into the surface-bound tetrafluoroethylidene moieties (CuCF-CF₃) followed by a dimerization step to form octafluoro-2-butene (CF₃CFCFCF₃) at 315 K as gas product. The surface-bound (Cu-C₂F₅) decomposes preferentially, at low coverages (?0.04 L), via consecutive α-F abstraction to afford intermediate, trifluoroethylidyne (CuCCF₃), resulting in the final coupling reaction to yield hexafluoro-2-butyne (CF₃CCCF₃) at 425 K. However, at middle coverages (ca. 0.08-0.16 L exposure), the adsorbed perfluroethyl (Cu-C₂F₅) first experiences an α-F elimination and then prefers to loss the second F from β position to yield the intermediate of Cu-CF₂-CFCu (μ-η,η-perfluorovinyl), which may further evolve into hexafluorocyclobutene (CF₂CFCFCF₂) at 350 K through cyclodimerization reaction. Our results have also shown that the surface reactions to yield the products, CF₃CFCFCF₃ and CF₃CCCF₃, obey first-order kinetics, whereas the formation of CF₂CFCFCF₂ follows second-order kinetics.     

Resonant Auger spectroscopy study of charge transfer phenomena in N 1s core-excited acetonitrile adsorbates on Si(0 0 1)-2 × 1

Acetonitrile (CH₃CN) adsorbs on Si(0 0 1)-2 × 1 at room temperature under two forms, a cycloaddition-like adduct (Si-CN-Si) and a pendent cyano (Si-CH₂-CN) resulting from the decomposition of the molecule. Resonant Auger spectroscopy has been used to study the excited-state-dependent electron transfer from the N 1s core-excited molecular adsorbate to the silicon substrate, using the core-hole lifetime (∼6 fs) as an internal clock. It is shown that the π_CN^∗ NEXAFS state lies within the silicon bandgap because of a core-excitonic effect. Therefore no charge transfer of the excited electron to the substrate is observed. On the other hand the π_CN^∗ NEXAFS state is placed within the silicon conduction band. Excitation to this orbital leads to valence/Auger spectra in which both resonant and normal Auger contributions are observed. Therefore there is evidence for a charge transfer from the pendent CN to the silicon surface, on a timescale estimated to tens of femtoseconds.     

Adsorption of phenylalanine on single crystal rutile TiO2(1 1 0) surface

The adsorption of the aromatic amino acid, phenylalanine on a TiO₂ rutile (1 1 0) single crystal surface has been investigated with photoemission and NEXAFS (near edge X-ray absorption fine structure) spectroscopy. The results indicate initial adsorption via the carboxylate group in a bidentate configuration with the phenyl ring oriented at approximately 25° to the surface normal. The amino group remains as NH₂. Subsequent layers of phenylalanine appear to adsorb as neutral molecules with H-bonding between NH₂ and CO groups.     

Adsorption of 2-butyne on Si(0 0 1) at room temperature: A valence band photoemission study

We present an angle resolved ultraviolet photoemission spectroscopy study of the adsorption of 2-butyne (CH₃-CC-CH₃) on Si(0 0 1)-2 × 1 at room temperature. We recorded valence band photoemission spectra for two azimuthal positions of a vicinal silicon surface, where all the rows formed by the surface silicon dimers are parallel. The photoemission symmetry selection rules allow the determination of the orientation of the molecular orbitals. The photoemission signal of the HOMO is enhanced when the electric field is parallel to the dimer rows. This showed that the π orbital left intact after the cyclo-addition reaction of the molecule with one silicon dimer is parallel to the dimer rows. This indicates that each 2-butyne molecule adsorbs on one silicon dimer. In spite of the size of the system and the vicinity of the orbitals, the angle resolved study points out that no dispersion of the electronic bands occurs. Not all the surface dimers are reacted so some disorder still exists on the surface preventing the formation of Bloch states.     

The dissociative adsorption of borane on the Ge(1 0 0)-2 × 1 surface: A density functional theory study

By means of cluster models coupled with density functional theory, we have studied the hydroboration of the Ge(1 0 0)-2 × 1 surface with BH₃. It was found that the Ge(1 0 0) surface exhibits rather different surface reactivity toward the dissociative adsorption of BH₃ compared to the C(1 0 0) and Si(1 0 0) surfaces. The strong interaction still exists between the as-formed BH₂ and H adspeices although the dissociative adsorption of BH₃ on the Ge(1 0 0) surface occurs readily, which is in distinct contrast to that on the C(1 0 0) and Si(1 0 0) surfaces. This can be understood by the electrophilic nature of the down Ge atom, which makes it unfavourable to form a GeH bond with the dissociating proton-like hydrogen. Alternatively, it can be attributed to the weak proton affinity of the Ge(1 0 0) surface. Nevertheless, the overall dissociative adsorption of BH₃ on group IV semiconductor surfaces is favourable both thermodynamically and kinetically, suggesting the interesting analogy and similar diversity chemistry of solid surface in the same group.     

Chemistry of Alanine on Pd(1 1 1): Temperature-programmed desorption and X-ray photoelectron spectroscopic study

The adsorption of alanine is studied on a Pd(1 1 1) surface using X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption (TPD). It is found that alanine adsorbs into the second and subsequent layers prior to completion of the first monolayer for adsorption at ∼250 K, while at ∼300 K, alanine adsorbs almost exclusively into the first monolayer with almost no second-layer adsorption. Alanine adsorbs onto the Pd(1 1 1) surface in its zwitterionic form, while the multilayer contains about 30-35% neutral alanine, depending on coverage. Alanine is thermally stable on the Pd(1 1 1) surface to slightly above room temperature, and decomposes almost exclusively by scission of the CCOO bond to desorb CO₂ and CO from the COO moiety, and the remaining fragment yields ethylamine and HCN.     

A bonding study of c-C5H8 adsorption on Pt(1 1 1)

The chemisorption of cyclopentane (c-C₅H₈) on Pt(1 1 1) has been studied using a qualitative band-structure calculations in the framework of tight-binding implementation with the YAeHMOP package. We modeled the metal surface by a two-dimensional slab of finite thickness with an overlayer of c-C₅H₈, in a (3 × 3) di-σ geometry. The c-C₅H₈ molecule is attached to the surface with its CC atoms bonded mainly with two Pt atoms while the opposite CH₂ bends towards the surface. The PtPt bonds in the underlying surface and the CC bonds of c-C₅H₈ are weakened upon the chemisorption. A noticeable Pt-H and Pt-C interactions has been observed. We found that of Pt band plays an important role in the bonding between c-C₅H₈ and the surface, as do the Pt 6s and 6p_z bands. The HOMO-LUMO bands of c-C₅H₈ are very dispersed, indicative of a strong interaction with the metal surface.     

Adsorption of organic molecules by photochemical reaction on Cl:Si(1 1 1) and H:Si(1 1 1) evaluated by HREELS

The covalent attachment of alkyl groups to silicon surfaces, via carbon-silicon bond formation, has been attempted using gas-surface reactions starting from Cl-terminated Si(1 1 1) or H:Si(1 1 1) under ultraviolet light irradiation. The formation of Cl-terminated Si(1 1 1) and its resulting stability were examined prior to deposition of organic molecules. High-resolution electron energy loss spectroscopy (HREELS) was utilized for detecting surface-bound adsorbates. The detection of photo-deposited organic species on Cl:Si(1 1 1) from gas-phase CH₄ or CH₂CH₂ was not significant. On H:Si(1 1 1), it was evident that after the photoreaction with gas-phase C₂H₅Cl, C₂H₅ groups were chemically bonded to the surface Si atoms through single covalent bonds. The C₂H₅ groups were thermally stable at temperatures below 600 K. Alkyl monolayers prepared on silicon surfaces by dry process will lead to a new prospective technology of nanoscale fabrication and biochemical applications.