大功率调制气流声源阵列的相干合成实验研究

完成了调制气流声源阵列的相干合成实验. 提出了利用主动相位控制方法实现调制气流声源阵列相干合成的思路, 介绍了基于随机并行梯度下降算法的声源阵列相干合成的原理. 对利用该算法实现声源阵列的相干合成进行了数值模拟, 完成了双调制气流声源阵列在远场的相干合成实验, 并给出算法参数的合理设置方案. 实验结果显示, 基频成分的相干合成效果明显, 算法收敛时测点处的声压级相比单源发射增加了4 dB, 接近于各单源功率谱中基频成分相干合成、其他频率成分非相干合成的结果; 结果表明实验中算法能够有效控制各调制气流声源辐射声波的相位, 取得了明显的相干合成效果. 关键词： 调制气流声源 相干合成 随机并行梯度下降 高阶谐波     

Multi-mode sound transmission in ducts with flow

Exhaust mufflers, large exhaust stacks, and turbofan engines are common examples of ducted noise. The most useful measure of the sound produced by these noise sources is the sound power transmitted along the duct. When airflow is present, sound power flow can no longer be uniquely determined from the usual measurements of acoustic pressure and particle velocity.One approach to sound power determination from in-duct pressure measurement, and the one discussed in this paper, is to predict the relationship between the sound power and pressure based upon an assumed mode amplitude distribution. This paper investigates the relationship between acoustic pressure and power for a family of idealized source distributions of arbitrary temporal and spatial order. Incoherent monopole and dipole sources uniformly distributed over a duct cross-section can be obtained as special cases. This paper covers the sensitivity of the pressure-power relationship to source multipole order, frequency and, in particular, flow speed. It is shown that the introduction of flow in a hard-walled duct can have a substantial effect on the behavior of the pressure-power relationship for certain source distributions. Preliminary experimental results in a no-flow facility are presented in order to verify some of the main results.     

Automated measuring system for sound power measurement

It is sometimes important to know the sound power radiated from a sound source so that, for example, the solution noise abatement can be carried out on the basis of the sound power radiated.Measurement of the sound power in general is carried out in a reverberant enclosure. This measuring method is classed as an indirect one in that the sound power is obtained via the sound pressure level. Consequently, in order to determine the sound power radiated as precisely as possible, some measurement procedures for obtaining the space-average sound pressure have been devised. However, the procedure, which involves moving the measuring microphone from point to point, is extremely tedious. Accordingly, if the system from data acquisition to data processing is automated, the work required for obtaining the space-average sound pressure will be considerably reduced, as will the time required for processing the data.The development of an automatic measuring system for sound power is discussed and it is shown that the sound power obtained with the system devised agrees well with that obtained by more familiar means.     

Active noise control in ducts: some physical insights

The mechanisms of active noise control in a duct are examined. Acoustical measurements are used to determine directly the acoustic power flow associated with both primary and secondary sources as a function of secondary to primary source strength ratio and volume velocity relative phase angles. A complete analytical model is also developed which allows calculation of individual source power flows and total downstream power flow as a function of source strengths and relative phase angles for finite size sources. It is evaluated for monopole and dual secondary source arrangements, but can be extended easily to any number of secondary sources. The model considers a finite size primary source in the plane of the duct cross section and evaluates the effect that the secondary sources have on the primary source power output. Measurements of individual source output powers and total downstream acoustic powers agree well with theoretical predictions. It is demonstrated that, for the monopole system, sound attenuation is achieved primarily by suppression of the primary source acoustic power output, with a little remaining power being absorbed by the secondary source. For the dual secondary source system, it is shown that the power is primarily absorbed by the secondary sources, but that, at phase and amplitude values slightly different to optimum, noise reduction is achieved by a combination of energy absorption and primary source power suppression. The analysis also demonstrates the dependence of the achievable noise reduction on secondary source size and location with respect to the primary source.     

双声源位置和强度识别的三维声强方法

目前在远场识别声源空间位置和强度缺乏行之有效的方法。针对此问题,提出采用四传声器进行三维声强测量,从而构建出声强、声源坐标和声功率的非车线性方程组,求解方程得出声源空间坐标和强度的方法。以3个三维声强探头对两个同频率单极子声源的识别为例,分别利用数值仿真和半消声室内的实验进行方法验证,并对声源的识别空间分辨率做了测试,得出角度识别最大误差为3.83°,为真实值的8.5%,距离识别最大误差0.1 m,为真实距离的10%。结果表明采用该方法空间坐标和声功率识别均具有很高的准确度,双声源的空间位置分辨力也优于远场声全息方法。      

Spectral estimation method for noisy data using a noise reference

The development of array processing methods to extract the useful characteristics of acoustic sources such as their locations and absolute levels, starting from the measured sound field is one of the main issues in aero-acoustics. The conventional beamforming method is a very popular technique investigated to solve the power level estimation problem. It has the advantage of being robust, easy to implement and cheap in computation time. However, this technique is also known for having poor spatial resolution capabilities which prevents the correct source levels being obtained for numerous practical applications. Deconvolution techniques of the result computed with CBF, with the point spread function of the array manifold, may restore the power levels of the acoustic sources that would be observed in the absence of the array resolution effects. However, the accuracy of the results provided by deconvolution methods is very sensitive to background noise, always present in acoustic measurements. This process should be carried out after the additive noise has been suitably attenuated and, ideally, the deconvolution operator should amplify the noise as little as possible. Another approach is described in the article. It consists in using a noise reference and a new technique called spectral estimation method with additive noise to remove both the smearing effect produced by the array response and the background noise. The technique has been applied to computer and experimental simulations conducted both in an anechoic chamber and in the test section of an open wind tunnel involving acoustic sources radiating in a noisy environment. The levels of the sources were found with a good level of accuracy and the background noise greatly reduced, confirming the validity of the approach and the satisfactory performance of the method proposed.     

基于时域多普勒修正的运动声全息识别方法

由于运动声源测量信号中多普勒效应的存在,一般声全息方法无法直接使用,而阵列信号波束成形处理方法无法进行定量分析.本方法建立了基于测量面、辐射面和全息面的运动学几何关系,提出了声源与测量信号之间的非线性时间映射方法,基于运动声源的声源特征函数,构造了消除多普勒效应的全息面时域声压分布.全息重建得到运动声源表面有效声压分布,实现了对主要声源处声压幅值的定量估计.实际运动声源的测量实验结果证明了该方法的有效性.     

Characterisation of valves as sound sources: Structure-borne sound

Taps and other valves are major sound sources in piping systems and can cause unacceptable noise levels in buildings. The noise results from the fluid-, structure- and air-borne sound emission. At present the acoustic emission of water appliances is tested according to a European standard, the shortcomings of which are apparent as a result of a round robin test of different European laboratories. As a result, there are currently neither acceptable measurement methods for water appliances available nor input data for prediction models. This paper considers methods of characterizing water appliances as sources of structure-borne sound. The concepts of mobility and free velocity are employed for a source characterisation based on power. Taps are considered alone and also in combination with a basin, where again the mobility and free velocity are used. A reception plate method is assessed as an alternative. The two methods each provide an independent characterisation of a structure-borne sound source as a single value. The values are on a power basis and provide input data suitable for prediction of the installed structure-borne power and thence the resultant sound pressure in adjacent rooms. Measured and predicted values of sound pressure level, caused by a wash-basin installed in an adjacent room, are compared.     

中国筝的声功率级测试

筝是中国古老的弹弦乐器。但迄今为止,对其声功率级一直未进行科学的测定。本文在一混响室内根据ISO及GB标准,对二十一弦筝的声功率级进行了首次测定。两位资深乐师在混响室内分别演奏各自的乐器,通过围绕乐师和乐器布置的四通道测试设备,对筝所辐射的声功率级和动态范围进行测定。测试结果表明,中国筝在以不同力度演奏单音、音阶和乐曲时所辐射的声功率级及其频率特性均有所不同。考虑到乐器演奏音阶时所辐射的声功率级及其动态范围与演奏乐曲时的声功率级接近,并且,音乐的空间感也大都在乐器以f力度演奏乐曲的强音标志乐段时最为显著,故此我们建议中国筝所辐射的声功率级用其以f力度演奏音阶时的平均声功率级表示。本文测试的两架中国筝以f力度演奏音阶时的平均声功率级为85.9dB。文中不仅首次公布了中国筝声功率级的测试结果,并且所介绍的测试方法对其它乐器声功率级测试也具有借鉴意义。民族乐器所辐射的声音性能的确定是民族音乐厅堂音质研究的基础。     

椰胡声功率级的半消声室测试

椰胡是具有地方特色的拉弦乐器之一,多用于演奏广东音乐和广东戏曲、曲艺的伴奏。但对其发声强度一直未进行过科学的测试。本文介绍在华南理工大学半消声室内参照ISO(GB)标准对椰胡声功率级的测量工作。由两位资深乐师分别用两把椰胡在pp,mp,f和ff力度下演奏单音、音阶和乐曲,对每一把椰胡的每一测试内容,由十通道测试设备同步测试中心频率为100～10000 Hz的1/3倍频带声压级谱,通过计算获得每把椰胡在演奏每项内容时的声功率级和动态范围。通过对两把椰胡的测试结果进行平均,获得该乐器在演奏上述内容时的典型声功率级数值及频谱。文中并将半消声室内的测试结果与混响室内的测试结果相对比,探讨测试环境对测试结果的影响。民族乐器发声强度及其频谱特性的获得是开展民族音乐厅堂音质研究的基础。