RAS: An efficient probe to characterize Si(0 0 1)-(2 × 1) surfaces

A complete inspection of the capabilities of reflectance anisotropy spectroscopy (RAS) in studying the adsorption of molecules or atoms on the Si(0 0 1)-(2 × 1) surface is presented. First, a direct comparison between RA spectra recorded on the clean Si(0 0 1)-(2 × 1) and the corresponding topography of the surface obtained using scanning tunneling microscopy (STM) allows us to quantify the mixing of the two domains that are present on the surface. Characteristic RA spectra recorded for oxygen, hydrogen, water, ethylene, benzene are compared to try to elucidate the origin of the optical structures. Quantitative and qualitative information can be obtained with RAS on the kinetics of adsorption, by monitoring the RA signal at a given energy versus the dose of adsorbate; two examples are presented: H₂/Si(0 0 1) and C₆H₆/Si(0 0 1). Very different behaviours in the adsorption processes are observed, making of this technique a versatile tool for further investigations of kinetics.     

A novel (8 × 4) superstructure as precursor to the c(4 × 4) phase during Sb/Si(0 0 1) desorption

The role of kinetics in the superstructure formation of the Sb/Si(0 0 1) system is studied using in situ surface sensitive techniques such as low energy electron diffraction, Auger electron spectroscopy and electron energy loss spectroscopy. Sb adsorbs epitaxially at room-temperature on a double-domain (DD) 2 × 1 reconstructed Si(0 0 1) surface at a flux rate of 0.06 ML/min. During desorption, multilayer Sb agglomerates on a stable Sb monolayer (ML) in a DD (2 × 1) phase before desorbing. The stable monolayer desorbs in the 600–850 °C temperature range, yielding DD (2 × 1), (8 × 4), c(4 × 4), DD (2 × 1) phases before retrieving the clean Si(0 0 1)-DD (2 × 1) surface. The stable 0.6-ML (8 × 4) phase here is a precursor phase to the recently reported 0.25-ML c(4 × 4) surface phase, and is reported for the first time.     

Direct decomposition of nitrogen monoxide over a K-deposited Co(0 0 0 1) surface: Comparison to K-doped cobalt oxide catalysts

The influence of deposited potassium on the oxidation and NO reactivity of a Co(0 0 0 1) surface was studied using X-ray photoelectron spectroscopy. The formation of surface CoO was observed when the clean Co(0 0 0 1) surface was exposed to O₂ at 500 K. In contrast, the Co atoms on the K-deposited Co(0 0 0 1) surface remained at a lower oxidation state, CoO_x (0 < x < 1). No adsorption or dissociation of NO occurred on the CoO/Co(0 0 0 1) surface at 320 K, whereas a NO₂⁻ species formed on the oxidized K/Co(0 0 0 1) surface. This species is considered to be an intermediate in NO decomposition. It was concluded that the role of potassium was (i) to form the NO₂⁻ intermediate, and (ii) to keep the Co surface partially oxidized (CoO_x) as the active site for the dissociation of the NO₂⁻ species.     

XPS and SRUPS study of oxygen adsorption on Cd0.9Zn0.1Te (1 1 1)A surface

Synchrotron radiation ultraviolet photoemission spectroscopy (SRUPS) and X-ray photoelectron spectroscopy (XPS) have been applied to investigate oxygen adsorption on a cadmium zinc telluride (CZT) (1 1 1)A surface. The surface chemical composition and the surface oxidation process were monitored by recording the Te 3d, O 1s, Zn 2p, Cd 4d core level peaks, and the Cd MNN Auger peak. The CZT (1 1 1)A surface was effectively oxidized by dosing oxygen directly. The typical surface state of the clean CZT (1 1 1)A surface was identified. After oxygen exposure, this surface state disappeared and a signal due to the formation of O–CZT appeared. In addition, the work function of CZT decreased with the increasing oxygen exposure.     

Electronic surface states of Cu(1 1 0) surface

Surface states are a unique and important class of quantum states that shave an important effect on the electronic properties of Cu(1 1 0) surface. The Cu(1 1 0) surface has been studied using ultraviolet photoemission spectroscopy (PES), inverse photoemission spectroscopy (IPES), and reflection anisotropy spectroscopy (RAS), and shows a resonance in the RAS spectra at 2.1 eV due to a transition between occupied and unoccupied surface states. The unoccupied surface state involved in the RAS transition at an energy of 1.7 eV at the point of the surface Brillouin zone has been investigated using IPES and the occupied surface state is seen in PES spectra at 0.45 eV below the Fermi level. The energy difference of the surface states, 2.15 eV, is a good match to the transition energy found in the RAS experiments.     

A PdO(1 0 1) thin film grown on Pd(1 1 1) in ultrahigh vacuum

We present experimental results demonstrating that a high quality PdO(1 0 1) thin film can be grown on Pd(1 1 1) in ultrahigh vacuum by oxidizing the metal at 500 K using an oxygen atom beam, followed by annealing to 675 K. Low energy electron diffraction (LEED) images show that the [0 1 0] direction of the PdO(1 0 1) thin film aligns with the [−1 1 0] direction of the Pd(1 1 1) substrate, and that the PdO film grows in three degenerate domains, rotated 120° relative to one another. Based on excellent agreement between the experimental and simulated LEED patterns, we conclude that the surface structure of the PdO thin film deviates minimally from bulk-terminated PdO(1 0 1). Recent temperature programmed desorption (TPD) experiments also provide evidence that the PdO(1 0 1) thin film on Pd(1 1 1) is terminated by the stoichiometric surface in which half of the Pd atoms are coordinatively unsaturated (cus), corresponding to a cus-Pd atom density equal to about 35% of the surface density of Pd(1 1 1). The ability to generate a well-defined PdO(1 0 1) surface in ultrahigh vacuum should provide new opportunities for conducting model surface science studies of PdO, particularly studies aimed at elucidating the reactivity of PdO(1 0 1) toward species important in commercial applications of Pd catalysis.     

Adsorption of Ag on Si(1 0 0) surface

The chemisorption of one monolayer Ag atoms on an ideal Si(1 0 0) surface is studied by using the self-consistent tight-binding linear muffin-tin orbital method. The adsorption energies (E_ad) of different sites are calculated. It is found that the adsorbed Ag atoms are more favorable on C site (fourfold site) than on any other sites on Si(1 0 0) surface, the polar covalent bond is formed between Ag atom and surface Si atom, a Ag and Si mixed layer does not exist and does form an abrupt interface at the Ag–Si(1 0 0) interface. This is in agreement with the experiment results. The layer-projected density of states is calculated and compared with that of the clean surface. The charge transfer is also investigated. Comparing with the Au/Si(1 0 0) system, the interaction is weaker between Ag and Si than between Au and Si.     

Adsorption of hydrogen and carbon monoxide on Rh(1 1 1)/V surface alloys

A detailed study of the interaction of hydrogen and carbon monoxide with two different Rh(1 1 1)/V surface alloys (1/3 monolayer of V in the second atomic layer or 1/3 monolayer of V in form of islands on the surface) is presented in comparison to the clean Rh(1 1 1) surface. For hydrogen a decrease in the sticking coefficient is found for both alloy surfaces. The sticking coefficient of H₂ as a function of the translational energy is similar to the Rh(1 1 1) surface, showing a direct activated adsorption mechanism. For low translational energies hydrogen adsorption is dominated by dynamical steering on Rh(1 1 1) and by a precursor mechanism on the Rh(1 1 1)/V subsurface alloy. The H₂ TPD desorption peaks are shifted to lower temperatures on the alloy surfaces, caused by the downshift of the metal d-band due to V alloying. On all three surfaces the saturation coverage of hydrogen was measured, giving 1.2, 1.0 and 0.8 monolayer for Rh(1 1 1), the Rh(1 1 1)/V subsurface alloy and for the Rh(1 1 1)/V islands, respectively. For CO the sticking coefficients and the saturation coverages are basically the same on the Rh(1 1 1) and the alloy surfaces. There is an extrinsic precursor on the ordered CO (√3×√3) phase on the Rh(1 1 1) surface, but there is no evidence for such a precursor on the Rh(1 1 1)/V subsurface alloy. On the Rh(1 1 1)/V islands surface, the extrinsic precursor exists on the Rh(1 1 1) surface between the V islands. Apparently this precursor is only stable on the ordered CO layer on Rh(1 1 1).     

Spin-polarized ion scattering spectroscopy of CCl4 adsorption on Fe(0 0 1) surfaces

The interaction of CCl₄ molecules with Fe(0 0 1) surfaces was investigated by spin-polarized ion scattering spectroscopy (SP-ISS). It was observed that CCl₄ molecules adsorb dissociatively on the surface at ambient temperature (290 K), and consequently, iron and chlorine were major surface constituents. It was found that the chlorine adatoms are located atop of iron atoms of the second surface layer (hollow sites of the surface). It is indicated that the spin state of iron atoms at the surface is not affected by exposure to a CCl₄ atmosphere, while almost no spin is induced in the chlorine adatoms. Similar behavior is observed in the spin states of iron and chlorine on an oxygen preadsorbed-Fe(0 0 1) surface. The difference in the spin states of iron and chlorine clarifies the local property of the incidence ion neutralization and element selectivity of SP-ISS in this CCl₄/Fe system.     

Defects and Pd growth on the reduced SnO2(1 0 0) surface

Scanning tunneling microscopy experiments on a clean, reduced SnO₂(1 0 0)-(1 × 1) surface reveal surface defects with zero-, one-, and two-dimensions. Point defects consist of missing SnO/SnO₂ units. Line defects are probably crystallographic shear planes that extend to the surface and manifest themselves as rows of atoms, shifted half a unit cell along the [0 1 0] direction. Their ends act as preferential nucleation sites for the formation of Pd clusters upon vapor deposition. Areas of a more reduced surface phase, still with a (1 × 1) structure and a half-unit cell deep, form at [0 0 1]-oriented step edges.     

An investigation of the effect of pre-dosed O atoms on the adsorption of NO on Pt{2 1 1}

Reflection absorption infrared spectroscopy (RAIRS) and temperature programmed desorption (TPD) have been used to investigate the effect of pre-dosed O atoms on the adsorption of NO on Pt{2 1 1} at room temperature. RAIRS experiments show that no new species are formed when NO is adsorbed onto a Pt{2 1 1} surface that has been pre-dosed with oxygen and no species are lost from the spectra, compared to spectra recorded for NO adsorption on the clean Pt{2 1 1} surface. However pre-dosed oxygen atoms do influence the frequency and intensity of several of the observed infrared bands. In stark contrast, pre-dosed O has a large effect on the TPD spectra. In particular N₂ and N₂O desorption, seen following NO adsorption on the clean Pt{2 1 1} surface, is completely inhibited. This effect has been assigned to the blocking of NO dissociation by the pre-adsorbed O atoms. A new NO desorption peak, not seen for NO adsorption on the clean Pt{2 1 1} surface, is also observed in TPD spectra recorded following NO adsorption on an oxygen pre-dosed Pt{2 1 1} surface.     

First-principles calculation of Mg(0 0 0 1) thin films: Quantum size effect and adsorption of atomic hydrogen

We have carried out first-principles calculation of Mg(0 0 0 1) free-standing thin films to study the oscillatory quantum size effect exhibited in the surface energy, work function, interlayer relaxation, and adsorption energy of the atomic hydrogen adsorbate. The quantum well states have been shown. The calculated energetics and interlayer relaxation of clean and H-adsorbed Mg films are clearly featured by quantum oscillations as a function of the thickness of the film, with oscillation period of about eight monolayers, consistent with recent experiments. The calculated quantum size effect in H adsorption can be verified by observing the dependence of H coverage on the thickness of Mg(0 0 0 1) thin films gown on Si(1 1 1) or W(1 1 0) substrate which has been experimentally accessible.     

Coadsorption of lanthanum with boron and gadolinium with boron on Mo(1 1 0)

Submonolayer to multilayer coadsorption of lanthanum (La) with boron (B) and gadolinium (Gd) with boron on the surface of Mo(1 1 0) has been studied by means of Auger electron spectroscopy (AES), electron energy loss spectroscopy (EELS) and work function () measurements. The equilibrium state of double adsorbate systems achieved either by adsorption of rare-earth metal (REM) on boron precovered Mo(1 1 0) surface held at room temperature or after moderate annealing of the system with opposite order of adsorption (B on REM films) is the layer which is the inhomogeneous mixture of boron and REM atoms with preferential concentration of boron in the surface area of the mixed film. The work function of such films even at REM to boron concentration ratio much higher than 1/6 are very close to the values of corresponding bulk LaB₆ and GdB₆, favoring assumption of surface rearrangement as the dominant reason of high electron emission efficiency of hexaborides. Almost total similarity of the results for La–B and Gd–B systems can be viewed as the consequence of weak participation of Gd f-electrons in determining the thermionic properties of corresponding double layers.     

Theoretical study of interaction between atoms of Au, Ag, Cu and clean Si(1 1 1) surface

To evaluate the interactions between the atoms of Au, Ag and Cu and clean Si(1 1 1) surface, two types of silicon clusters Si₄H₇ and Si₁₆H₂₀ together with their metal complexes were studied by using hybrid (U)B3LYP density functional theory method. Optimized geometries and energies on different adsorption sites indicate that: (1) the binding energies at different adsorption sites are large (ranging from 1.2 to 2.6 eV depend on the metal atoms and adsorption sites), suggesting a strong interaction between metal atom and silicon surface; (2) the most favorable adsorption site is the on top (T) site. Mulliken population analysis indicated that in the system of on top (T) site, a covalent bond is formed between metal atom and dangling bond of surface Si atom.     

Investigation of the role of oxygen in NO reduction by C2H4 on the surface of stepped Pt(3 3 2)

The influence of pre-dosed oxygen on NO–C₂H₄ interactions on the surface of stepped Pt(3 3 2) has been investigated using Fourier transform infrared reflection–absorption spectroscopy (FTIR-RAS) and thermal desorption spectroscopy (TDS). The presence of oxygen significantly suppresses the adsorption of NO on the steps of Pt(3 3 2), leading to a very specific adsorption state for NO molecules when oxygen–NO co-adlayers are annealed to 350 K (assigned as atop NO on step edges). An oxygen-exchange reaction also takes place between these two kinds of adsorbed molecules, but there appears to be no other chemical reaction, which can result in the formation of higher-valence NOx.

C₂H₄ molecules which are post-dosed at 250 K to adlayers consisting of ¹⁸O and NO do not have strong interactions with either the NO or the ¹⁸O atoms. In particular, interactions which may result in the formation of new surface species that are intermediates for N₂ production appear to be absent. However, C₂H₄ is oxidized to C¹⁸O₂ by ¹⁸O atoms at higher annealing temperature. This reaction scavenges surface ¹⁸O atoms quickly, and the adsorption of NO molecules on step sites is therefore quickly restored. As a consequence, NO dissociation on steps proceeds very effectively, giving rise to N₂ desorption which closely resembles that following only NO exposure on a clean Pt(3 3 2), both in peak intensity and desorption temperature. It is concluded that the presence of ¹⁸O₂ in the selective catalytic reduction (SCR) of NO with C₂H₄ on the surface of Pt(3 3 2) does not play a role of activating reactants.     

Photoelectron holography analysis of W(1 1 0)(1×1)–O surface

By applying photoelectron holography analysis to a W(1 1 0)(1×1)–O surface, the real space image was reconstructed around the oxygen atoms. The peak positions showed that the oxygen atoms lie within the top layer, which does not contradict the results of the R-factor X-ray photoelectron diffraction analysis of Daimon et al. [Surf. Sci. 408 (1998) 260]. The holographic analysis of the calculated photoelectron diffraction pattern indicated that holographic reconstruction reveals atomic positions up to the third nearest-neighbor scatterers. Our study suggests the possibility that the distance among the adsorbate oxygen atoms is slightly larger than the lattice constant of the substrate.     

Chlorine adsorption on Si(1 1 1) studied by optical methods

The adsorption process of chlorine on Si(1 1 1) has been studied by means of real time surface differential reflectance (SDR) spectroscopy and second harmonic generation (SHG). The structure observed at 3.6 eV in SDR spectra is attributed to transitions including Si–Cl antibonding states. However, the overall feature is due to the removal of the electronic states of the clean surface. Developments of adsorption on Si adatom dangling bonds and breaking of adatom back bonds are obtained from SDR spectra and second harmonic (SH) intensity. They are well fit by the solutions of the rate equations under the assumption of adsorption of atoms without migration, and the initial sticking probability on the dangling bonds and the initial breaking probability of the back bonds are determined. Dependence of the adsorption kinetics on the carrier concentration is briefly reported.     

Structural and electronic properties of the Ti/W(1 1 1) adsorption system

We present theoretical and experimental study of the structural and electronic properties of the Ti/W(1 1 1) adsorption system. Atomic arrangements of the considered surfaces and their electronic structures have been obtained from first-principles pseudopotential calculations based on the density functional theory in a plane-wave-basis implementation. The corresponding experimental data have been provided by photofield emission spectroscopy. Investigations of the clean and Ti-covered W(1 1 1) surfaces indicate substantial structural relaxations deep into the substrate, and a noticeable modification of the surface electronic properties of the system induced already by a thin film of titanium. Configuration with adatoms positioned in substrate-lattice-continuation (i.e., deep-hollow) sites is found to be energetically most favorable. A good agreement between the measured photofield emission spectra and the computed local-density-of-states distributions confirms our theoretical predictions for a clean W(1 1 1) substrate as well as Ti coverages of 0.25 and 1 ML.     

Coadsorption of water and CO molecules on Ru(0 0 1) at high CO coverages: comparisons with a Ru(0 0 1) electrode surface

The coadsorption of carbon monoxide (CO) and water molecules on a Ru(0 0 1) surface has been studied by infrared spectroscopy, LEED and STM. At high CO coverage phases, a 2×2-(2CO+D₂O) structure was observed on both UHV and electrode surfaces. Electrode potential dependent structures from CO and water adlayers on an electrode surface were reproduced on a UHV surface by controlling molecular orientations of the first layer and second over-layer water molecules. At lower CO coverages, a CO band center showed coverage dependent shift down to 1444 cm⁻¹ due to an electron transfer from a lone pair of a water molecule to CO 2π^*.     

Enhanced dispersion and stability of gold nanoparticles on stoichiometric and reduced TiO2(1 1 0) surface in the presence of molybdenum

Mo, Au and their coadsorbed layers were produced on nearly stoichiometric and oxygen-deficient titania surfaces by physical vapor deposition (PVD) and characterized by low energy ion scattering (LEIS), X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES) and scanning tunnelling microscopy (STM). The behavior of Au/Mo bimetallic layers was studied at different relative metal coverages and sample temperatures.

STM data indicated clearly that the deposition of Au on the Mo-covered stoichiometric TiO₂(1 1 0) surface results in an enhanced dispersion of gold at 300 K. The mean size of the Au nanoparticles formed at 300 K on the Mo-covered TiO₂(1 1 0) was significantly less than on the Mo-free titania surface (2 ± 0.5 nm and 4 ± 1 nm, respectively). Interestingly, the deposition of Mo at 300 K onto the stoichiometric TiO₂(1 1 0) surface covered by Au nanoparticles of 3–4 nm (0.5 ML) also resulted in an increased dispersity of gold. The driving force for the enhanced wetting at 300 K is that the Au–Mo bond energy is larger than the Au–Au bond energy in 3D gold particles formed on stoichiometric titania. In contrast, 2D gold nanoparticles produced on ion-sputtered titania were not disrupted in the presence of Mo at 300 K, indicating a considerable kinetic hindrance for breaking of the strong Au-TiO_x bond.

The annealing of the coadsorbed layer formed on a strongly reduced surface to 740 K did not cause a decrease in the wetting of titania surface by gold. The preserved dispersion of Au at higher temperatures is attributed to the presence of the oxygen-deficient sites of titania, which were retained through the reaction of molybdenum with the substrate. Our results suggest that using a Mo-load to titania, Au nanoparticles can be produced with high dispersion and high thermal stability, which offers the fabrication of an effective Au catalyst.