Experimental and theoretical studies of Raman spectroscopy on 4‐mercaptopyridine aqueous solution and 4‐mercaptopyridine/Ag complex system

Raman scattering and surface‐enhanced Raman scattering (SERS) have been used to study the behavior of 4‐mercaptopyridine (4‐Mpy) dissolved in water and adsorbed on silver mirrors. In order to gain the actual structure and the theoretical modes of the 4‐Mpy dissolved in water and adsorbed on the surface of silver mirror, ab initio calculation at the Hartree–Fock (HF) level and density functional theory (DFT) at Beck's three‐parameter Lee‐Yang‐Parr (B3LYP) level were performed to calculate the vibrational modes and wavenumbers. 4‐Mpy/2H₂O and 4‐Mpy/Ag complex systems were optimized, and then the corresponding Raman spectra were calculated and analyzed. Compared with the experimental results, the calculated results of 4‐Mpy and 4‐Mpy/2H₂O complex systems obtained from DFT method were more accurate. Among the results calculated with HF method, the one with three Ag atoms was economical, which took less computer time but gave equivalent results to those with more noumber of Ag atoms. Copyright © 2007 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman spectroscopy of 4‐tert‐butylpyridine on a silver electrode

We report the observation of large surface‐enhanced Raman scattering (SERS) (10⁶) for 4‐tert‐butylpyridine molecules adsorbed on a silver electrode surface in an electrochemical cell with electrode potential set at − 0.5 V. A decrease in electrode potential to − 0.3 V was accompanied by a decrease in relative intensities of the vibrational modes. However, there were no changes in vibrational wavenumbers. Comparison of both normal solution Raman and SERS spectra shows very large enhancement of the intensities of a₁, a₂, and b₂ modes at laser excitation of 488 nm. Enhancement of the non‐totally symmetric modes indicates the presence of charge transfer as a contributor to the enhancement. Copyright © 2011 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering of 4‐mercaptopyridine on sub‐monolayers of α‐Fe2O3 nanocrystals (sphere,spindle, cube)

We report surface‐enhanced Raman scattering (SERS) spectra from 4‐mercaptopyridine (4‐Mpy) adsorbed on sub‐monolayers of α‐Fe₂O₃ nanocrystals (sphere, spindle, cube). The maximum enhancement factor has been estimated to be about 10⁴ compared to that of 4‐Mpy in solution. A possible mechanism has been proposed that the charge transfer between the α‐Fe₂O₃ nanocrystals and the 4‐Mpy molecules is most likely responsible for the observed enhancement of Raman intensity of adsorbed 4‐Mpy molecules as surface plasmon resonances have not occurred. Copyright © 2009 John Wiley & Sons, Ltd.     

Identification of two Ag‐2,2′:6′,2″‐terpyridine surface species on Ag nanoparticle surfaces by excitation wavelength dependence of SERS spectra and factor analysis: evidence for chemical mechanism contribution to SERS of Ag(0)–tpy

Measurement and interpretation of the excitation wavelength dependence of surface‐enhanced Raman scattering (SERS) spectra of molecules chemisorbed on plasmonic, e.g. Ag nanoparticle (NP) surfaces, are of principal importance for revealing the charge transfer (CT) mechanism contribution to the overall SERS enhancement. SERS spectra, their excitation wavelength dependence in the 445–780‐nm range and factor analysis (FA) were used for the identification of two Ag‐2,2′:6′,2″‐terpyridine (tpy) surface species, denoted Ag⁺–tpy and Ag(0)–tpy, on Ag NPs in systems with unmodified and/or purposefully modified Ag NPs originating from hydroxylamine hydrochloride‐reduced hydrosols. Ag⁺–tpy is a spectral analogue of [Ag(tpy)]⁺ complex cation, and its SERS shows virtually no excitation wavelength dependence. By contrast, SERS of Ag(0)–tpy surface complex generated upon chloride‐induced compact aggregate formation and/or in strongly reducing ambient shows a pronounced excitation wavelength dependence attributed to a CT resonance (the chemical mechanism) contribution to the overall SERS enhancement. Both the resonance (λ_exc = 532 nm) and off‐resonance (λ_exc = 780 nm) pure‐component spectra of Ag(0)–tpy obtained by FA are largely similar to surface‐enhanced resonance Raman scattering (λ_exc = 532 nm in resonance with singlet metal to ligand CT (¹ MLCT) transition) and SERS (λ_exc = 780 nm) spectra of [Fe(tpy)₂]²⁺ complex dication. Copyright © 2014 John Wiley & Sons, Ltd.     

The irradiation influence on the properties of silver sulfide (Ag2S) colloidal nanoparticles

The aqueous solutions of different stability containing silver sulfide (Ag₂S) nanoparticles are studied. The stable, transparent, and turbid solutions have been subjected to daylight for 7 months, to ultraviolet and laser irradiation, as well as to an electron beam. Solar radiation is found to favor the Ag₂S reduction to Ag and/or the formation of Ag₂S/Ag hybrid nanoparticles in the solution. At a high amount of hybrid nanoparticles, the exciton–plasmon interaction causes asymmetry in the absorption spectra. The exposure of Ag₂S particles precipitated from the solution with the electron beam leads to the reversible growth of Ag threads. The possible exciton–plasmon interplay mechanisms in Ag₂S/Ag hybrid nanoparticles are considered. The physical mechanisms of the changing Ag₂S stoichiometry, the formation of metallic Ag and Ag₂S/Ag hybrid nanoparticles are the generation of hot carriers and the energy transfer (exciton–plasmon interaction) in a metal–semiconductor hybrid nanosystem are elucidated, as well.

     

Theoretical elucidation of the origin of surface‐enhanced Raman spectra of PCB52 adsorbed on silver substrates

To better understand experimentally observed surface‐enhanced Raman Scattering (SERS) of polychlorinated biphenyls (PCBs) adsorbed on nanoscaled silver substrates, a systematic theoretical study was performed by carrying out density functional theory and time‐dependent density functional theory calculations. 2,2′,5,5′‐tetrachlorobiphenyl (PCB52) was chosen as a model molecule of PCBs, and Ag_n (n = 2, 4, 6, and 10) clusters were used to mimic active sites of substrates. Calculated normal Raman spectra of PCB52–Ag_n (n = 2, 4, 6, and 10) complexes are analogical in profile to that of isolated PCB52 with only slightly enhanced intensity. In contrast, the corresponding SERS spectra calculated at adopted incident light are strongly enhanced, and the calculated enhancement factors are 10⁴ ~ 10⁵. Thus, the experimentally observed SERS phenomenon of PCBs supported on Ag substrates should correspond to the SERS spectra rather than the normal Raman spectra. The dominant enhancement in Raman intensities origins from the charge transfer resonance enhancement between the molecule and clusters. Copyright © 2014 John Wiley & Sons, Ltd.     

DFT studies of surface‐enhanced Raman spectroscopy of 1,4‐benzenedithiol–Au2 complex under the effect of static electric fields

In this work, we demonstrate that the applied electric‐field strength and orientation can multiply modulate the Raman intensity and vibrational wavenumber of small molecule–metal complex, 1,4‐benzenedithiol–Au₂ (1,4BDT–Au₂), by density functional theory and time‐dependent density functional theory simulations. The polarizabilities are changed by the applied electric fields, leading to enhanced specific vibrational intensity and shifted vibrational wavenumber of the surface‐enhanced Raman scattering effect. The applied electric fields perturb the bonds and angles of the 1,4BDT–Au₂ complex. Owing to this reason, the peaks of Raman spectra related to these structures exhibit distinguishable responses in quasi‐static field (low‐frequency oscillating electric field). We use the visualized method of charge difference density to show that the electric fields tune the traditional excited state to pure charge‐transfer excited state. The charge‐transfer resonance transition produces enhanced Raman intensities for non‐totally symmetric modes and totally symmetric modes. These simulation results of the function of static electric field provide new guidance for the surface‐enhanced Raman scattering measurements. Copyright © 2015 John Wiley & Sons, Ltd.     

Proof‐of‐Concept Studies Directed toward the Formation of Metallic Ag Nanostructures from Ag3PO4 Induced by Electron Beam and Femtosecond Laser

In this work, for the first time, the instantaneous nucleation and growth processes of Ag nanoparticles on Ag₃PO₄ mediated by femtosecond laser pulses are reported and analyzed. The investigated samples are pure Ag₃PO₄ sample, electron‐irradiated Ag₃PO₄ sample, and laser‐irradiated sample. Complete characterization of the samples is performed using X‐ray diffraction (XRD), Rietveld refinements, field emission scanning electron microscopy, and energy dispersive spectroscopy (EDS). XRD confirms that the irradiated surface layer remains crystalline, and according to EDS analysis, the surface particles are composed primarily of Ag nanoparticles. This method not only offers a one‐step route to synthesize Ag nanoparticles using laser‐assisted irradiation with particle size control, but also reports a complex process involving the formation and subsequent growth of Ag nanoparticles through an unexpected additive‐free in situ fabrication process.     

Direct evidence for conversion of p‐aminothiophenol to p,p'‐dimercaptoazobenzene by in situ reduplicative surface‐enhanced Raman scattering measurements

There has been a surge of interest in the surface‐enhanced Raman scattering (SERS) of p‐aminothiophenol (PATP), since its SERS spectra are dependent on the measurement conditions. However, there is a dispute over the origin of the so‐called b₂ modes in SERS spectrum of PATP recently. Some researchers propose that these bands come from selective chemical enhancement, while others conclude that these bands are due to the a_g modes of p,p'‐dimercaptoazobenzene (DMAB) produced from PATP by surface photoreaction. To solve this problem, we have studied the SERS spectra of PATP on Au and Ag nanoparticles by in situ measurement under various conditions. The results proved that the b₂ modes are not due to PATP but due to the a_g modes of DMAB. The key of the method is to ensure the SERS spectra taken from the same point in reduplicative measurements. The result showed that the stable SERS spectrum of PATP was essentially from DMAB. The reversibility of the PATP SERS spectra in previous studies is due to the variety of the measurement points, which is in nature of different PATP conversions to DMAB under different conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

SERS study of Ag nanoparticles electrodeposited on patterned TiO2 nanotube films

In this work, Ag nanoparticles (NPs) were deposited on patterned TiO₂ nanotube films through pulse‐current (PC) electrodeposition, and as a result patterned Ag NPs films were achieved. Scanning electron microscopy (SEM), electron probe microanalysis (EPMA), and X‐ray diffraction (XRD) were used, respectively, to study the morphology, uniformity, and phase structure of the patterned Ag NP films. The size and density of the as‐deposited Ag NPs could be controlled by changing the deposition charge density, and it was found that the patterned Ag NP films produced under a charge density of 2.0 C cm⁻² gave intense UV–vis and Raman peaks. Two‐dimensional surface‐enhanced Raman scattering (SERS) mapping of rhodamine 6G (R6G) on the patterned Ag NP films demonstrated a high‐throughput, localized molecular adsorption and micropatterned SERS effect. Copyright © 2010 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering‐based approach for DNA detection at low concentrations via polyvinyl alcohol‐protected silver grasslike patterns

A simple method is demonstrated to detect DNA at low concentrations on the basis of surface‐enhanced Raman scattering (SERS) via polyvinyl alcohol‐protected silver grasslike patterns (PVA‐Ag GPs) grown on the surface of the common Al substrate. By the SERS measurements of sodium citrate and thymine, the PVA‐Ag GPs are shown to be an excellent SERS substrate with good activity, stability and reproducibility. With the use of the tested molecule of thymine, the enhancement factor of the PVA‐Ag GPs is up to ~1.4 × 10⁸. The PVA‐Ag GPs are also shown to be an excellent SERS substrate with good biocompatibility for DNA detection, and the detection limit is down to ~10⁻⁵ mg/g. Meanwhile, the assignations of the Raman bands and the adsorption behaviors of the DNA molecules are also analyzed. In this work, the geometry optimization and the wavenumber analysis of adenine–Ag and guanine–Ag complexes for the ground states are performed using density functional theory, B3LYP functional and the LanL2DZ basis set. The transition energies and the oscillator strengths of adenine–Ag and guanine–Ag for the lowest six singlet excited states were calculated by using the time‐dependent density functional theory method with the same functional and basis set. The results show that the charge transfer in the adenine–Ag and guanine–Ag complexes should be the chemical factor for the SERS of the DNA molecules. Lastly, this method may be employed in large‐scale preparation of substrates that have been widely applied in the Raman analysis of DNA because the fabrication process is simple and inexpensive. Copyright © 2011 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering of 4‐aminobenzenethiol on silver: confirmation of the origin of b2‐type bands

In order to resolve the dispute on the origin of the b₂‐type bands in the surface‐enhanced Raman scattering (SERS) of 4‐aminobenzenethiol (4‐ABT), we have measured its SERS spectra under a variety of conditions, including variable temperature and rotation, electrochemistry, and pH, as well as in the presence of a reducing agent. For comparison, the SERS spectra of 4‐nitrobenzenethiol (4‐NBT) and methyl orange (MO), a prototype azo compound, were also measured. First, we found that 4‐ABT on Ag is not subjected to photoreaction, although 4‐NBT is highly photoreactive on a silver surface. In the electrochemical environment, b₂‐type bands of 4‐ABT lost their intensity at very negative potentials, but the intensity recovered immediately upon raising the potential. In addition, b₂‐type bands were observed under rotation even after lowering the potential. The disappearance and reappearance of the b₂‐type bands could also be observed by bringing the sample of 4‐ABT on Ag into contact consecutively with a borohydride solution and water. This is because the surface potential of Ag is lowered by contact with a borohydride solution. Besides, we found that not only the normal Raman but also the SERS spectral features of 4‐ABT are hardly affected by pH variation, while the spectral features of MO are greatly affected, especially in the region of the NN stretching vibration, suggesting that the possibility of a photoconversion of 4‐ABT to an azo compound is low. Altogether, the b₂‐type bands were attributed to 4‐ABT, appearing in conjunction with the chemical enhancement mechanism in SERS. Copyright © 2011 John Wiley & Sons, Ltd.     

Particle‐Arrayed Silver Mesocubes Synthesized via Reducing Silver Oxide Mesocrystals for Surface‐Enhanced Raman Spectroscopy

In this study, we demonstrate an easy particle‐mediated protocol using the specific structure of mesocrystal Ag₂O sacrificial templates to synthesize highly rough‐cubic Ag mesocages. To the best of our knowledge, the mesocrystal particles are reported for the first time as sacrificial templates for synthesizing metal particles. The obtained Ag mesocages show high surface‐enhanced Raman scattering (SERS) sensitivity because of the highly rough topography formed by arrays of uniform individual Ag nanoparticles. Abundant “hot spots” with greatly enhanced local electromagnetic field are promoted densely on the mesocage surface by the plenty of deep and narrow gaps and the hollow structure. The single‐particle SERS signal generated by the Ag mesocage has an enhancement factor of approximately 10⁹, which is approximately four times higher than the Ag mesocage synthesized using single‐crystal Ag₂O particle as a template. Meanwhile, this signal displays a linear dependence on the detected analyte concentration, sensitively down to 1.0 × 10^?12 m .     

Adsorption of neurotensin‐family peptides on SERS‐active Ag substrates

Kinetensin (KN) and its amino acids 1–8 fragment ([des‐Leu⁹]KN), neuromedin N (NMN), and xenopsin (XP) and its two analogs (XP‐1 and XP‐2) belong to the neurotensin family of peptides and are known to stimulate the growth of human tumors. In this work, we report Fourier transform‐Raman and surface‐enhanced Raman scattering (SERS) studies of these peptides and discuss their structures, orientation, and mode of adsorption onto a highly specific, electrochemically roughened SERS‐active Ag electrode that is characterized by the formation of a 50–150 nm Ag island on its surface. We show that the investigated peptides bind preferentially to this surface by substantial electronic overlap between the metal surface and the π‐orbitals of the benzene rings of the Phe, Tyr, and Trp residues, which forces them to take parallel or almost parallel orientations with respect to the surface. In addition, the –CH₂–, –CNH₂, and –COO^‐ molecular fragments are involved in interactions with (binding to or in close proximity with) the Ag surface. The SERS data show that the adsorption modes in each of these cases are very similar. In addition, we show that the specific differences in the amino acid sequences do not significantly affect the orientation of the investigated peptides on the Ag substrate. This result implies that the N‐termini of the neurotensin‐family peptides do not influence the mode for adsorption onto the Ag substrates. Copyright © 2012 John Wiley & Sons, Ltd.     

A facile method for the synthesis of large‐size Ag nanoparticles as efficient SERS substrates

Silver nanoparticles (Ag NPs) enjoy a reputation as an ultrasensitive substrate for surface‐enhanced Raman spectroscopy (SERS). However, large‐scale synthesis of Ag NPs in a controlled manner is a challenging task for a long period of time. Here, we reported a simple seed‐mediated method to synthesize Ag NPs with controllable sizes from 50 to 300 nm, which were characterized by scanning electron microscopy (SEM) and UV–Vis spectroscopy. SERS spectra of Rhodamine 6G (R6G) from the as‐prepared Ag NPs substrates indicate that the enhancement capability of Ag NPs varies with different excitation wavelengths. The Ag NPs with average sizes of ~150, ~175, and ~225 nm show the highest SERS activities for 532, 633, and 785‐nm excitation, respectively. Significantly, 150‐nm Ag NPs exhibit an enhancement factor exceeding 10⁸ for pyridine (Py) molecules in electrochemical SERS (EC‐SERS) measurements. Furthermore, finite‐difference time‐domain (FDTD) calculation is employed to explain the size‐dependent SERS activity. Finally, the potential of the as‐prepared SERS substrates is demonstrated with the detection of malachite green. Copyright © 2016 John Wiley & Sons, Ltd.     

A Combined Experimental and Theoretical Study on the Formation of Ag Filaments on β‐Ag2MoO4 Induced by Electron Irradiation

A combined experimental and theoretical study is presented to understand the novel observed nucleation and early evolution of Ag filaments on β‐Ag₂MoO₄ crystals, driven by an accelerated electron beam from an electronic microscope under high vacuum. The growth process, chemical composition, and the element distribution in these filaments are analyzed in depth at the nanoscale level using field‐emission scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM) with energy‐dispersive spectroscopy (EDS) characterization. To complement experimental results, chemical stability, structural and electronic aspects have been studied systematically using first‐principles electronic structure theory within a quantum theory of atoms in molecules (QTAIM) framework. The Ag nucleation and formation on β‐Ag₂MoO₄ are a result of structural and electronic changes of the AgO₄ tetrahedral cluster as a constituent building block of β‐Ag₂MoO₄, consistent with Ag metallic formation. The formation of Ag filament transforms the β‐Ag₂MoO₄ semiconductor from n‐ to p‐type concomitant with the appearance of Ag defects.     

Comparison of SERRS and RRS excitation profiles of [Fe(tpy)2]2+ (tpy = 2,2':6',2'‐terpyridine) supported by DFT calculations: effect of the electrostatic bonding to chloride‐modified Ag nanoparticles on its vibrational and electronic structure

Nonresonance (or normal) Raman scattering (NRS), resonance Raman scattering (RRS), surface‐enhanced Raman scattering (SERS), and surface‐enhanced RRS (SERRS) spectra of [Fe(tpy)₂]²⁺ complex dication (tpy = 2,2':6',2''‐terpyridine) are reported. The comparison of RRS/NRS and SERRS/SERS excitation profiles of [Fe(tpy)₂]²⁺ spectral bands in the range of 445–780 nm is supported by density functional theory (DFT) calculations, Raman depolarization measurements, comparison of the solid [Fe(tpy)₂](SO₄)₂ and solution RRS spectra, and characterization of the Ag nanoparticle (NP) hydrosol/[Fe(tpy)₂]²⁺ SERS/SERRS active system by surface plasmon extinction spectrum and transmission electron microscopy image of the fractal aggregates (D = 1.82). By DFT calculations, both the Raman active modes and the electronic states of the complex have been assigned to the symmetry species of the D_2d point group. It has been demonstrated that upon the electrostatic bonding of the complex dication to the chloride‐modified Ag NPs, the geometric and ground state electronic structure of the complex and the identity of the three different metal‐to‐ligand charge transfer (¹MLCT) electronic transitions remain preserved. On the other hand, the effect of ion pairing manifests itself by a slight change in localization of one of the electronic transitions (with max. at 552 nm) as well as by promotion of the Herzberg–Teller activation of E modes resulting from coupling of E and B₂ excited electronic states. Finally, the very low, 1 × 10⁻¹¹ M SERRS spectral detection limit of [Fe(tpy)₂]²⁺ at 532‐nm excitation is attributed to a concerted action of the electromagnetic and molecular resonance mechanism, in conjunction to the electrostatic bonding of the complex dication to the chloride‐modified Ag NP surface. Copyright © 2014 John Wiley & Sons, Ltd.     

New insights on surface‐enhanced Raman scattering based on controlled aggregation and spectroscopic studies,DFT calculations and symmetry analysis for 3,6‐bi‐2‐pyridyl‐1,2,4,5‐tetrazine adsorbed onto citrate‐stabilized gold nanoparticles

A systematic study on the surface‐enhanced Raman scattering (SERS) for 3,6‐bi‐2‐pyridyl‐1,2,4,5‐tetrazine (bptz) adsorbed onto citrate‐modified gold nanoparticles (cit‐AuNps) was carried out based on electronic and vibrational spectroscopy and density functional methods. The citrate/bptz exchange was carefully controlled by the stepwise addition of bptz to the cit‐AuNps, inducing flocculation and leading to the rise of a characteristic plasmon coupling band in the visible region. Such stepwise procedure led to a uniform decrease of the citrate SERS signals and to the rise of characteristic peaks of bptz, consistent with surface binding via the N heterocyclic atoms. In contrast, single addition of a large amount of bptz promoted complete aggregation of the nanoparticles, leading to a strong enhancement of the SERS signals. In this case, from the distinct Raman profiles involved, the formation of a new SERS environment became apparent, conjugating the influence of the local hot spots and charge‐transfer (CT) effects. The most strongly enhanced vibrations belong to a₁ and b₂ representations, and were interpreted in terms of the electromagnetic and the CT mechanisms: the latter involving significant contribution of vibronic coupling in the system. Copyright © 2010 John Wiley & Sons, Ltd.     

Ag<Subscript>2</Subscript>S/Ag heteronanostructure

An Ag₂S/Ag heteronanostructure has been prepared for the first time by hydrochemical deposition. The “acanthite α-Ag₂S–argentite β-Ag₂S” phase transformation has been studied in situ by high-temperature X-ray diffraction and transmission electron microscopy. The crystal structure of argentite has been revealed. It has been found that the concentration of vacant sites in the metal sublattice of argentite exceeds 92%. The reversible acanthite–argentite transformation in the Ag₂S/Ag heteronanostructure at the application of the external bias voltage is considered.     

Effect of surface morphology on surface‐enhanced Raman scattering of 4‐aminobenzenethiol adsorbed on gold substrates

The substrate‐dependent surface‐enhanced Raman scattering (SERS) of 4‐aminobenzenethiol (4‐ABT) adsorbed on Au surfaces has been investigated. 4‐ABT is one of the very unique adsorbate molecules whose SERS spectral patterns are known to be noticeably dependent on the relative contribution of chemical enhancement mechanism vs electromagnetic enhancement mechanism. The SERS spectral patterns of 4‐ABT adsorbed on gold substrates with various surface morphology have thus been analyzed in terms of the symmetry types of the vibrational modes. Almost invisibly weak b₂ type vibrational bands were observed in the SERS spectra of the 4‐ABT adsorbed on Au colloidal sol nanoparticles or commercially available Au micro‐powders because of the weak contribution of the chemical enhancement. However, greatly enhanced b₂ vibrational bands were observed in the spectra of the 4‐ABT molecules adsorbed on the synthesized Au(Zn) sponge or the electrochemically roughened Au(ORC) foil caused by the strong contribution of the chemical enhancement mechanism. Copyright © 2008 John Wiley & Sons, Ltd.