A Combined Experimental and Theoretical Study on the Formation of Ag Filaments on β‐Ag2MoO4 Induced by Electron Irradiation

A combined experimental and theoretical study is presented to understand the novel observed nucleation and early evolution of Ag filaments on β‐Ag₂MoO₄ crystals, driven by an accelerated electron beam from an electronic microscope under high vacuum. The growth process, chemical composition, and the element distribution in these filaments are analyzed in depth at the nanoscale level using field‐emission scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM) with energy‐dispersive spectroscopy (EDS) characterization. To complement experimental results, chemical stability, structural and electronic aspects have been studied systematically using first‐principles electronic structure theory within a quantum theory of atoms in molecules (QTAIM) framework. The Ag nucleation and formation on β‐Ag₂MoO₄ are a result of structural and electronic changes of the AgO₄ tetrahedral cluster as a constituent building block of β‐Ag₂MoO₄, consistent with Ag metallic formation. The formation of Ag filament transforms the β‐Ag₂MoO₄ semiconductor from n‐ to p‐type concomitant with the appearance of Ag defects.     

Charge‐transfer contributions in surface‐enhanced Raman scattering from Ag,Ag2S and Ag2Se substrates

The degree of charge‐transfer in Ag–4‐mercaptopyridine (Mpy) and Ag₂S–4‐Mpy systems is investigated by use of surface‐enhanced Raman spectroscopy (SERS). Ag₂S and Ag₂Se nanoparticles are prepared on the basis of the former formation of Ag nanoparticles to make the SERS analytical objects comparable. We utilize the intensity of the non‐totally symmetric modes (either b₁ or b₂) as compared with the totally symmetric a₁ modes to measure the degree of charge‐transfer. We find ~25% of charge‐transfer contribution for Ag–4‐Mpy, whereas 81 ~ 93% for Ag₂S–4‐Mpy. It means that the charge‐transfer resonance contribution dominates the overall enhancement in SERS of Ag₂S–4‐Mpy. Energy level diagram is applied to discuss the likely charge‐transfer transition between Ag, Ag₂S, Ag₂Se and 4‐Mpy. This article may point out the link among the three main resonance sources and could enable some insights into the electronic pathways available to the metal‐molecule and semiconductor‐molecule systems. Copyright © 2012 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering investigations on silver nanoparticles deposited on alumina and titania nanotubes: influence of the substrate material on surface‐enhanced Raman scattering activity of Ag nanoparticles

Silver nanoparticles deposited on various ‘inert’ porous materials (mainly Al₂O₃ and TiO₂) are often used as substrates for surface‐enhanced Raman scattering (SERS) measurements. In this study, we used the sputter deposition technique to cover tubular arrays of Al₂O₃ and TiO₂ with Ag nanoparticles. Raman spectra of pyridine (as a probe molecule) and of two selected dyes (5‐(4‐dimethylaminobenzylidene)rhodanine and 5‐(4‐(dimethylamino)benzylidene)‐3‐(3‐methoxypropyl)rhodanine) adsorbed on fabricated Ag/TiO₂‐n/Ti and Ag/Al₂O₃‐n/Al substrates were measured. We found that the SERS spectra of pyridine adsorbed on Ag nanoparticles deposited on an Al₂O₃‐n/Al substrate are distinctly different from those measured for an Ag/TiO₂‐n/Ti composite. Similar effects were observed for dyes adsorbed on the surface of both composites. The spectral differences between two kinds of composites (Ag/TiO₂‐n/Ti and Ag/Al₂O₃‐n/Al) are discussed in terms of (1) the modified electronic structure of the Ag nanoparticles due to their interaction with different substrate materials and (2) the different atomic topology of the metal particles thus deposited on the surfaces of the substrates. Composite samples were also studied with the aid of scanning electron microscopy (SEM) and Auger electron spectroscopy (AES) to reveal their characteristic morphological and chemical features. Copyright © 2012 John Wiley & Sons, Ltd.     

Ag3PO4/rectorite nanocomposites: Ultrasound-assisted preparation,characterization and enhancement of stability and visible-light photocatalytic activity

To overcome the drawback of low stable brought by the transformation of Ag⁺ into Ag, a highly efficient and stable photocatalyst Ag₃PO₄/rectorite composite was successfully synthesized by ultrasound-assisted precipitation method. The as-prepared samples were characterized by field-emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, N₂ adsorption-desorption, room-temperature photoluminescence spectra, Fourier transform infrared spectrum measurements and UV–vis diffuse reflectance spectra. The absorption edges of the Ag₃PO₄/rectorite display a noticeable shift to the visible light region as compared to that of the Ag₃PO₄. Compared with bare Ag₃PO₄, the Ag₃PO₄/rectorite composite by ultrasound-assisted precipitation process exhibits significantly enhanced photocatalytic activity and stable for methyl orange (MO) degradation under visible light irradiation. The improved activity of the Ag₃PO₄/rectorite photocatalyst could be attributed to the expanded visible light absorption, the enhanced interfacial charge transfer and the inhibited recombination of electron-hole pairs. Therefore, the facile ultrasound-assisted preparation process provides some insight into the application of Ag₃PO₄/rectorite nanocomposites in photocatalytic degradation of organic pollutants.     

Particle‐Arrayed Silver Mesocubes Synthesized via Reducing Silver Oxide Mesocrystals for Surface‐Enhanced Raman Spectroscopy

In this study, we demonstrate an easy particle‐mediated protocol using the specific structure of mesocrystal Ag₂O sacrificial templates to synthesize highly rough‐cubic Ag mesocages. To the best of our knowledge, the mesocrystal particles are reported for the first time as sacrificial templates for synthesizing metal particles. The obtained Ag mesocages show high surface‐enhanced Raman scattering (SERS) sensitivity because of the highly rough topography formed by arrays of uniform individual Ag nanoparticles. Abundant “hot spots” with greatly enhanced local electromagnetic field are promoted densely on the mesocage surface by the plenty of deep and narrow gaps and the hollow structure. The single‐particle SERS signal generated by the Ag mesocage has an enhancement factor of approximately 10⁹, which is approximately four times higher than the Ag mesocage synthesized using single‐crystal Ag₂O particle as a template. Meanwhile, this signal displays a linear dependence on the detected analyte concentration, sensitively down to 1.0 × 10^?12 m .     

The irradiation influence on the properties of silver sulfide (Ag2S) colloidal nanoparticles

The aqueous solutions of different stability containing silver sulfide (Ag₂S) nanoparticles are studied. The stable, transparent, and turbid solutions have been subjected to daylight for 7 months, to ultraviolet and laser irradiation, as well as to an electron beam. Solar radiation is found to favor the Ag₂S reduction to Ag and/or the formation of Ag₂S/Ag hybrid nanoparticles in the solution. At a high amount of hybrid nanoparticles, the exciton–plasmon interaction causes asymmetry in the absorption spectra. The exposure of Ag₂S particles precipitated from the solution with the electron beam leads to the reversible growth of Ag threads. The possible exciton–plasmon interplay mechanisms in Ag₂S/Ag hybrid nanoparticles are considered. The physical mechanisms of the changing Ag₂S stoichiometry, the formation of metallic Ag and Ag₂S/Ag hybrid nanoparticles are the generation of hot carriers and the energy transfer (exciton–plasmon interaction) in a metal–semiconductor hybrid nanosystem are elucidated, as well.

     

Visible light response of silver 4‐aminobenzenethiolate and silver 4‐dimethylaminobenzenethiolate probed by Raman scattering spectroscopy

Silver thiolate is a layered compound with a Raman spectrum that is known to change with time, becoming the same as the surface‐enhanced Raman scattering (SERS) spectrum of the parent thiol molecule adsorbed on Ag nanoparticles. On this basis, the Raman scattering characteristics of silver 4‐aminobenzenethiolate (Ag‐4ABT) compounds were investigated to determine whether certain peaks that are identifiable in the SERS spectrum of 4‐aminobenzenethiol (4‐ABT) but absent in its normal Raman spectrum were also apparent in the Ag salt spectrum. For comparative purposes, the Raman scattering characteristics of silver 4‐dimethylaminobenzenethiolate (Ag‐4MABT) were also examined. Raman spectra acquired while spinning the sample were typified by only a₁‐type vibrational bands of Ag‐4ABT and Ag‐4MABT, whereas in the static condition, several non‐a₁‐type bands were identified. The spectral patterns acquired in the static condition were similar to the intrinsic SERS spectra of 4‐ABT or 4‐dimethylaminobenzenethiol (4‐MABT) adsorbed on pure Ag nanoparticles. Notably, the CH₃ group vibrational bands were observable for Ag‐4MABT irrespective of the sample rotation. In addition, no decrease in intensity during irradiation with a visible laser was observed for any of the bands, suggesting that no chemical conversion actually took place in either 4‐ABT or 4‐MABT. The preponderance of evidence led to the conclusion that the non‐a₁‐type bands observable in the SERS spectra must be associated with the chemical enhancement mechanism acting on the Ag nanoparticles. The chemical enhancement effect was more profound at 514.5 nm than at 632.8 nm, and was more favorable for 4‐ABT than 4‐MABT at both wavelengths. Copyright © 2012 John Wiley & Sons, Ltd.     

SERS microRaman spectral probing of adsorbate‐containing,liquid‐overlayed nanosponge Ag aggregates assembled from fractal aggregates

Adsorbate‐containing, nanosponge Ag aggregates overlayed by a thin (~1.5 mm) liquid layer are reported as a new type of sample for Surface‐enhanced Raman scattering (SERS) microRaman spectral measurements and adsorbate (analyte) detection. Macroscopic Ag aggregates (of about 1.5 × 1.0 × 0.025 mm size) with the nanosponge internal morphology (revealed by Scanning electron microscopy (SEM)) were prepared by 3D assembling of fused fractal aggregates (D = 1.84 ± 0.04) formed in Ag nanoparticle hydrosol/HCl/adsorbate systems with 2,2’‐bipyridine (bpy) and/or a cationic free‐base tetrakis(2‐methyl‐4‐pyridiniumyl) porphine (H₂TMPyP) as the testing adsorbates. For SERS microRaman measurements, the macroscopic aggregate was overlayed by a thin (~1.5 mm) layer of the residual liquid. Preparation procedure, nanoscale imaging, and SERS spectral probing including the determination of the detection limits of the adsorbates revealed the following advantages of the adsorbate‐containing, liquid‐overlayed 3D nanosponge aggregate as a sample for SERS microRaman spectral measurements: (1) localization of adsorbate (analyte) into hot spots and, simultaneously, prevention of the analyte decomposition during the spectral measurement (carried out without an immersion objective), (2) fast and simple sample preparation, and (3) minimization of sample volume and an efficient concentration of hot spots into the focus of the laser beam. The advantages of the nanosponge Ag aggregates are further demonstrated by the 40 fmol limit of detection of bpy as Ag(0)‐bpy surface complex, as well as by preservation of the native structure of the cationic free‐base porphyrin H₂TMPyP. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and structural investigation of Pd/Ag bimetallic nanoparticles prepared by the solvothermal method

Pd/Ag bimetallic nanoparticles have been synthesized successfully by reducing PdCl₂ and AgNO₃ mixture in ethylene glycol solution using the solvothermal method. The prepared samples have been characterized by UV–vis, XRD, TEM, HRTEM, EDS, and XPS, respectively. Moreover, the bimetallic particles possess alloy and core-shell structure from the HRTEM images. Here, the lattice fringe spacing of Pd/Ag bimetallic nanoparticles corresponds to its (111) plane, which is between that of the Pd and Ag nanoparticles prepared under the same conditions. Furthermore, the possible formation mechanism and factors influencing the formation of Pd/Ag bimetallic nanoparticles, such as reaction temperature and time, have also been investigated.     

Fabrication of surface‐enhanced Raman scattering‐active ZnO/Ag composite microspheres

We show in this paper how zinc oxide (ZnO)/silver (Ag) composite microspheres can be prepared by the reduction of Ag(NH₃)₂⁺ with the reducing agent formaldehyde in aqueous solution on the surface of ZnO microspheres. During the preparation, Sn²⁺ was absorbed on the surface of ZnO microspheres for sensitization and activation, and then Ag(NH₃)₂⁺ was reduced to Ag nanoparticles by the reducing agent to obtain ZnO/Ag composite microspheres. SEM and TEM images revealed silver nanoparticles with a diameter ranging from tens to 100 nm. X‐Ray photoelectron spectra (XPS), X‐ray diffraction (XRD) patterns and UV‐vis spectra were used to characterize the structure of the ZnO/Ag composite microspheres. The origin of the surface‐enhanced Raman scattering properties was traced to the surface of the ZnO/Ag composite microspheres. The enhancement factor was estimated in detail, and the enhancement mechanism for the SERS effect was also investigated. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis and formation mechanism of Ag–Ni alloy nanoparticles at room temperature

Ag–Ni nanoparticles were prepared with a chemical reduction method in the presence of polyvinylpyrrolidone (PVP) used as a stabilizing agent. During the synthesis of Ag–Ni nanoparticles, silver nitrate was used as the Ag⁺ source while nickel sulfate hexahydrate was used as Ni²⁺ source. Mixed solutions of Ag⁺ source and Ni²⁺ source were used as the precursors and sodium borohydride was used as the reducing agent. Five ratios of Ag⁺/Ni²⁺ (9:1, 3:1, 1:1, 1:3, and 1:9) suspensions were prepared in the corresponding precursors. Ag–Ni alloy nanoparticles were obtained with this method at room temperature. Scanning electronic microscope (SEM), energy dispersive spectrum (EDS), high resolution transmission electron microscope (HRTEM) were used to characterize the morphology, composition and crystal structure of the nanoparticles. The crystal structure was also investigated with X-ray diffraction (XRD). In all five Ag/Ni ratios, two kinds of particle structures were observed that are single crystal structure and five-fold twinned structure respectively. Free energy of nanoparticles with different crystal structures were calculated at each Ag/Ni ratio. Calculated results revealed that, with identical volume, free energy of single crystal particle is lower than multi-twinned particle and the difference becomes smaller with the increase of particle size; increase of Ni content will lead the increase of free energy for both structures. Formation of different crystal structures are decided by the structure of the original nuclei at the very early stage of the reduction process.     

Comparison of silver nanoparticles confined in nanoporous silica prepared by chemical synthesis and by ultra-short pulsed laser ablation in liquid

Hexagonally ordered mesoporous silica materials, MCM-41 and SBA-15, have been synthesized and loaded with Ag nanoparticles, utilizing both chemical synthesis and ultra-short pulsed laser ablation in liquid. In laser ablation, a silver target, immersed in aqueous suspension of ordered mesoporous silica SBA-15, was irradiated by ultra-short laser pulses to generate silver nanoparticles. For comparison, samples of similar silver contents were prepared either by incorporating silver into the SBA-15 during a hydrothermal synthesis or by introducing silver in MCM-41 by template ion-exchange. Samples were characterized by XRD, N₂ physisorption, TEM and UV–vis spectroscopy. All preparations contained significant amount of 5–50 nm size silver agglomerates on the outer surface of the silica particles. The laser ablation process did not cause significant destruction of the SBA-15 structure and metallic silver (Ag⁰) nanoparticles were mainly generated. It is demonstrated that by laser ablation in aqueous silica suspension smaller and more uniform metallic silver particles can be produced and loaded on the surface of the silica support than by synthesis procedures. Catalytic properties of the samples have been tested in the total oxidation of toluene. Because of its favorable Ag dispersity, the Ag/SBA-15 catalyst, generated by the laser ablation method, had better catalytic stability and, relative to its Ag load, higher activity than the conventional Ag/SBA-15 preparations.     

An investigation of the surface-enhanced Raman scattering (SERS) effect from laser irradiation of Ag nanoparticles prepared by trisodium citrate reduction method

By irradiating a Ag colloid solution, produced by trisodium citrate reduction method, employing the active Quanta Ray Nd:YAG laser system, λ = 1064 nm, we prepared relatively small, spherical Ag nanoparticles with a narrow size distribution. The irradiated particles not only improve the configuration, but also the spectroscopy properties to some extent. The influence of the laser fluence on the irradiated energy was studied, via transmission electron micrograph (TEM) images, surface plasmon absorption (SPA) spectra, and surface-enhanced Raman scattering (SERS) spectra. Those benefit to understanding the spectroscopy properties of irradiated particles to obtain precise understanding of the mechanism. And probably the reasonable explanations are given.     

SERS study of Ag nanoparticles electrodeposited on patterned TiO2 nanotube films

In this work, Ag nanoparticles (NPs) were deposited on patterned TiO₂ nanotube films through pulse‐current (PC) electrodeposition, and as a result patterned Ag NPs films were achieved. Scanning electron microscopy (SEM), electron probe microanalysis (EPMA), and X‐ray diffraction (XRD) were used, respectively, to study the morphology, uniformity, and phase structure of the patterned Ag NP films. The size and density of the as‐deposited Ag NPs could be controlled by changing the deposition charge density, and it was found that the patterned Ag NP films produced under a charge density of 2.0 C cm⁻² gave intense UV–vis and Raman peaks. Two‐dimensional surface‐enhanced Raman scattering (SERS) mapping of rhodamine 6G (R6G) on the patterned Ag NP films demonstrated a high‐throughput, localized molecular adsorption and micropatterned SERS effect. Copyright © 2010 John Wiley & Sons, Ltd.     

Large‐area Ag nanorod array substrates for SERS: AAO template‐assisted fabrication,functionalization, and application in detection PCBs

Highly ordered arrays of thiolated β‐cyclodextrin (HS‐β‐CD) functionalized Ag‐nanorods (Ag‐NRs) with plasmonic antennae enhancement of electrical field have been achieved for encapsulation and rapid detection of polychlorinated biphenyls (PCBs). The large‐area ordered arrays of rigid Ag‐NRs supported on copper base were fabricated via porous anodic aluminum oxide (AAO) template‐assisted electrochemical deposition. The inter‐nanorod gaps between the neighboring Ag‐NRs were tuned to sub‐10 nm by thinning the pore‐wall thickness of the AAO template using diluted H₃PO₄. The nearly perfect large‐area ordered arrays of Ag‐NRs supported on copper base render these systems excellent in surface‐enhanced Raman scattering (SERS) performance with uniform electric field enhancement, as testified by the SERS spectra and Raman mappings of rhodamine 6 G. Furthermore, the Ag‐NRs were functionalized with HS‐β‐CD molecules so as to capture the apolar PCB molecules in the hydrophobic cavity of the CD. Compared to the ordinary undecorated SERS substrates, the HS‐β‐CD modified Ag‐NR arrays exhibit better capture ability and higher sensitivity in rapid detection of PCBs. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and characterization of highly conductive Sn–Ag bimetallic nanoparticles for printed electronics

To synthesize low-cost, highly conductive metal nanoparticles for inkjet printing materials, we synthesized Sn–Ag bimetallic nanoparticles using a polyol process with poly(vinyl pyrrolidone). Because a surface oxidation layer forms on Sn nanoparticles, various compositions of Sn–xAg [x = 0, 20, 40, 60, 80, 100 (wt%)] nanoparticles were synthesized and characterized for the purpose of removing the β-Sn phase. The results of XPS, TEM, and XRD analyses confirm that the formation of a bimetallic phase, such as Ag₄Sn or Ag₃Sn, hinders the β-Sn phase and, consequently, leads to the removal of the surface oxidation layer. To measure the sheet resistance of various compositions of Sn–Ag nanoparticles, we made the ink that contains Sn–Ag by dispersing 10 wt% of Sn–Ag nanoparticles in methanol. The sheet resistance is decreased by the conductive Sn–Ag phases, such as the fcc, Ag₄Sn, and Ag₃Sn phases, but sharply increased by the low-conductive Sn nanoparticles and the surface oxidation layer on the Sn nanoparticles. The sheet resistance results confirm that 80Ag20Sn and 60Ag40Sn bimetallic nanoparticles are suitable candidates for inkjet printing materials.     

The influence of the sintering temperature on the structural and the magnetic properties of doped manganites: La0.95Ag0.05MnO3 and La0.75Ag0.25MnO3

La_1−xAg_xMnO₃ samples were synthesized by standard sol-gel method with Ag concentrations of x=0.05 and 0.25. The samples from each concentration were pressed and sintered at 1000, 1200 and 1400 °C for 24 h in air for a systematic study. They were examined structurally by Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM) with Energy Dispersive Spectroscopy (EDS) and X-ray Diffraction (XRD) and magnetically by Magnetic Properties Measurements System (MPMS). AFM and SEM analyses show that surface morphology changes with Ag concentration and sintering temperature (T_S). It was observed that high temperature sintering leads Ag to leave material as determined from EDS analyses. XRD spectra exhibited that the crystal structure changes with Ag concentration while showing pronounced change with the sintering temperature. From the magnetic measurements, the Curie temperatures (T_C) and the isothermal magnetic entropy changes (−ΔSM) were calculated. It was observed that T_C increases with Ag concentration and decreases with T_S. The maximum −ΔSM was calculated to be 7.2 J/kg K under the field change of 5 T for the sample sintered at 1000 °C with x=0.25.     

Structural, electrical and gas-sensing properties of In2O3 : Ag composite nanoparticle layers

The central objective of this study is to investigate (i) size-dependent properties of In₂O₃ nanoparticles and (ii) the role of metal additives in enhancing the gas sensing response. For this purpose, In₂O₃ : Ag composite nanoparticle layers having welldefined individual nanoparticle size and composition have been grown by a two step synthesis method. Thermogravimetric analysis, X-ray diffraction and transmission electron microscopy have been used to study the effect of post-synthesis heat treatment on the size and structure of the nanoparticles. A first-time unambiguous observation of sizedependent lowering of transformation temperature has been explained in terms of lower cohesive energy of surface atoms and increase in surface-to-volume ratio with decrease in nanoparticle size. The gas sensing studies of In₂O₃ as well as the In₂O₃ : Ag composite nanoparticle layers have been studied as a function of size and composition. In₂O₃: Ag composite nanoparticle layers with 15% silver show a sensitivity of 436 and response time of 6 s for 1000 ppm of ethanol in air. Ag additives form a p-type Ag₂O, which interact with n-type In₂O₃ to produce an electron-deficient space-charge layer. In the presence of ethanol, interfacial Ag₂O reduces to Ag, creating an accumulation layer in In₂O₃ resulting in increased sensitivity     

Identification of two Ag‐2,2′:6′,2″‐terpyridine surface species on Ag nanoparticle surfaces by excitation wavelength dependence of SERS spectra and factor analysis: evidence for chemical mechanism contribution to SERS of Ag(0)–tpy

Measurement and interpretation of the excitation wavelength dependence of surface‐enhanced Raman scattering (SERS) spectra of molecules chemisorbed on plasmonic, e.g. Ag nanoparticle (NP) surfaces, are of principal importance for revealing the charge transfer (CT) mechanism contribution to the overall SERS enhancement. SERS spectra, their excitation wavelength dependence in the 445–780‐nm range and factor analysis (FA) were used for the identification of two Ag‐2,2′:6′,2″‐terpyridine (tpy) surface species, denoted Ag⁺–tpy and Ag(0)–tpy, on Ag NPs in systems with unmodified and/or purposefully modified Ag NPs originating from hydroxylamine hydrochloride‐reduced hydrosols. Ag⁺–tpy is a spectral analogue of [Ag(tpy)]⁺ complex cation, and its SERS shows virtually no excitation wavelength dependence. By contrast, SERS of Ag(0)–tpy surface complex generated upon chloride‐induced compact aggregate formation and/or in strongly reducing ambient shows a pronounced excitation wavelength dependence attributed to a CT resonance (the chemical mechanism) contribution to the overall SERS enhancement. Both the resonance (λ_exc = 532 nm) and off‐resonance (λ_exc = 780 nm) pure‐component spectra of Ag(0)–tpy obtained by FA are largely similar to surface‐enhanced resonance Raman scattering (λ_exc = 532 nm in resonance with singlet metal to ligand CT (¹ MLCT) transition) and SERS (λ_exc = 780 nm) spectra of [Fe(tpy)₂]²⁺ complex dication. Copyright © 2014 John Wiley & Sons, Ltd.     

Nanostructural,magnetic and electrical properties of Ag doped Mn-ferrite nanoparticles

Nano-crystalline MnFe_2−xAg_xO₄ (x = 0, 0.1, 0.2, 0.3 and 0.6) samples with average grain size of 4–7 nm were synthesized by a simple method based on decomposition of metal nitrates in presence of citric acid. The samples were characterized by different structural, magnetic and electrical measurements. Rietveld refinement of X-ray diffraction data confirmed cubic spinel structure of the samples. Results show that Ag doping decreases the crystallite size, magnetization and coercivity of nanoparticles. By increasing the Ag content in the samples the saturation magnetization shows interesting temperature dependent behavior. It was realized that magnetization of smaller particles show higher sensitivity to temperature variations than larger particles. DC electrical resistivity measurements in the temperature range of 300–650 K show that the resistivity first increases and then decreases by increasing the Ag content in the samples. Curie temperature (T_c) and polaron activation energy in ferromagnetic and paramagnetic regions were estimated by using resistivity curves.