基于改进粒子群优化算法的混沌系统参数估计方法

估计混沌系统的未知参数是混沌控制与同步中必须解决的关键问题.利用群集智能的新进展粒子群优化算法(PSO)的全局搜索能力，从初始粒子群的产生、目标函数的处理的角度改进PSO，将改进的PSO引入混沌系统参数估计和在线估计.仿真试验表明，改进算法具有良好的适应性、较高的收敛可靠性及精度，对信号叠加噪声的情形也具有较高的鲁棒性，是混沌系统参数估计的一种成功算法. 关键词： 混沌系统 参数估计 在线估计 粒子群优化算法     

Quantitative analysis of the supramolecular structure of metastable polycrystalline films by infrared spectropolarimetry

A method of quantitative estimation of the structural anisotropy of metastable organic polycrystalline films based on infrared spectropolarimetry is used to investigate the structural features films of the α form of copper phthalocyanine. Due to the separation of the inverse problem of reconstruction of the optical parameters of the medium into a number of stages with optimization over no more than two unknown parameters, the graphical tracking of the optimization process and, as a consequence, the minimization of errors and on-line correction of ambiguity are performed at each stage of the solution. It is demonstrated that the structure of copper phthalocyanine films vacuum-deposited onto a substrate can be changed by varying the substrate temperature, the angle of incidence of a molecular beam during the deposition, and the electrostatic field applied to the substrate.     

水声正交频分多址上行通信稀疏信道估计与导频优化

针对水声正交频分多址(OFDMA)上行通信中用户导频数量少、分布不均匀, 导致传统内插信道估计方法产生误码平层的问题, 提出一种稀疏信道估计与导频优化方法. 基于压缩感知(CS)理论估计稀疏信道冲激响应, 并依据CS理论中测量矩阵互相关最小化原理, 提出基于随机搜索的导频图案和导频功率联合优化算法. 仿真结果表明, 所提方法在不同多径扩展信道下的性能均优于基于线性内插的最小二乘估计、未经导频优化的CS信道估计以及单纯基于导频图案优化的CS信道估计. 水池实验分别验证了交织式和广义式子载波分配的水声OFDMA上行通信性能, 在接收信噪比高于10 dB时利用所提方法实现了两用户接入的可靠通信.     

多频带期望值最大声信号时延估计EI北大核心CSCD

通过分析复杂环境中不同频带声信号时延估计的差异,提出多频带期望值最大时延估计方法。为了使各频带之间无重叠,该方法采用独立分带划分声信号不同频带,然后计算各频带广义互相关函数,并对子带广义互相关函数建立最大似然模型,最后利用期望值最大算法将多维优化转为一维优化的迭代式,获得最优子带广义互相关函数,在此基础上估计声信号的时延信息。数据仿真和实际实验结果表明,多频带期望值最大化时延估计相较常规时延估计有效估计值的百分比提升了10%,并将最优频带互相关函数应用到该定位算法中,在网格间距为0.3 m时,得到的峰值区域汇聚更明显,定位效果更好。     

基于云模型的自适应量子免疫克隆算法

利用云模型能够兼顾随机性和模糊性的品质,提出一种基于云模型的自适应量子免疫克隆算法.使用云算子代替通用的量子旋转门这一量子进化算法核心算子用于寻优变异操作;通过控制云算子间的协作,实现算法在进化过程中对搜索范围的动态调整,使算法具有较强的全局搜索能力;同时,补充针对性的优化方案,有效避免了算法陷入局部最优.对标准数值优化问题的仿真对比实验表明,该算法具有寻优能力强、搜索精度高、稳定度好等优点;对非线性系统的参数估计仿真实验,该算法也取得了对参数的高精度有效估计.     

十字阵短时宽带声源实时定向算法

面向短时宽带声源实时定向问题,提出了一种基于互功率谱时延估计的十字阵定向优化算法。针对该方法估计结果离散且呈不均匀分布的特点,将观测平面划分为四个测量区域,并利用不同阵元组合分别处理,解决实时性与估计成功率的矛盾;依据互相关函数的特点,设计了若干判断准则,排除由于数据取样短造成的异常时延估计,改善算法的可靠性;采用频域插值方法,一定程度上提高时延估计精度,从而提高定向精度。MATLAB仿真和DSP系统实验表明,这种方法在实际应用中有效提高了对短时宽带声源定向的性能。     

一种基于混沌系统部分序列参数辨识的混沌保密通信方法

本文提出一种混沌保密通信方法,即混沌系统的部分序列用于混沌系统参数辨识其他序列用于通信保密.利用混沌蚁群优化算法对部分序列混沌系统进行参数辨识,以达到了解混沌系统全部信息的目的.在参数辨识过程中引入参数空间和蚁群空间,通过空间变换函数使参数空间与蚁群空间之间相互变换.文中使用Lorenz系统进行数值试验,其结果验证混沌系统部分序列参数辨识及混沌保密通信的可行性.     

基于混合群智能优化算法的混沌系统参数估计

混沌系统的未知系统参数估计是实现混沌控制和同步的首要问题,通过构造一个合理的适应度函数,可将其转化为一个多维搜索空间的优化问题.提出一种融合改进骨干粒子群算法与改进差分进化算法的混合群智能优化方法来解决上述优化问题.对骨干粒子群算法中的粒子位置更新机制以及差分进化算法中的变异操作、交叉操作、交叉概率因子的设计等进行改进,有效兼顾了种群的多样性与算法的收敛性.在此基础上,讨论骨干粒子群优化算法与差分进化的融合优化策略,实现两个算法的协同进化,进一步提高算法的综合优化性能.用6个基准测试函数以及Lorenz混沌系统为例进行仿真实验,结果表明该方法具有全局寻优能力强、收敛速度快、搜索精度高、稳健性好等优点.     

Inverse estimation of the pulse parameters of a time-varying laser pulse to obtain desired temperature at the material surface

A proper selection of the pulse parameters is essential to achieve desired temperature at the material surface. This leads to obtain the required metallurgical changes in the surface vicinity when a time-varying laser pulse is used in a heating process such as surface modification. In this paper, the conjugate gradient method (CGM) for parameter estimation is successfully applied to estimate the unknown laser pulse parameters for those purposes during laser heating process. The determination of the pulse parameters is treated as a one-dimensional, transient, non-linear inverse heat conduction problem (IHCP). Based on a sensitivity analysis, the inverse problem is solved as an optimization problem comparing a desired temperature at the surface and a calculated one where the objective function is minimized by CGM. The method has been applied to a test case of a heating process on steel, appropriate pulse parameters and desired temperature distribution can also be returned.     

Information-Disturbance Tradeoff in Estimating the Unknown Three-Qubit GHZ State

In a recent paper, Sacchi （Phys. Rev. Lett. 96 （2006） 220502） studied the information-disturbance tradeoff in estimating an unknown two-qubit maximally entangled state. In this study, we explore the tradeoff in estimating 13 an unknown three-qubit GHZ state. The optimal estimation process supplies a fidelity of 13/54 and the tradeoff interpolates smoothly between non-informative measurement and optimal estimation process.     

Sequential reconstruction of driving-forces from nonlinear nonstationary dynamics

This paper describes a functional analysis-based method for the estimation of driving-forces from nonlinear dynamic systems. The driving-forces account for the perturbation inputs induced by the external environment or the secular variations in the internal variables of the system. The proposed algorithm is applicable to the problems for which there is too little or no prior knowledge to build a rigorous mathematical model of the unknown dynamics. We derive the estimator conditioned on the differentiability of the unknown system’s mapping, and smoothness of the driving-force. The proposed algorithm is an adaptive sequential realization of the blind prediction error method, where the basic idea is to predict the observables, and retrieve the driving-force from the prediction error. Our realization of this idea is embodied by predicting the observables one-step into the future using a bank of echo state networks (ESN) in an online fashion, and then extracting the raw estimates from the prediction error and smoothing these estimates in two adaptive filtering stages. The adaptive nature of the algorithm enables to retrieve both slowly and rapidly varying driving-forces accurately, which are illustrated by simulations. Logistic and Moran-Ricker maps are studied in controlled experiments, exemplifying chaotic state and stochastic measurement models. The algorithm is also applied to the estimation of a driving-force from another nonlinear dynamic system that is stochastic in both state and measurement equations. The results are judged by the posterior Cramer-Rao lower bounds. The method is finally put into test on a real-world application; extracting sun’s magnetic flux from the sunspot time series.     

An objective quality assessment method for bit-reduction coding of wideband speech.

This paper proposes a new objective quality assessment method for bit-reduction coding of wideband speech taking into account the masking effect of quantizing noise. First, this paper analyzes the reliability and sensitivity of the speech quality assessment method, based on a paired-comparison test with a modulated noise reference signal, for the bit-reduction coding of high-quality wideband speech. Then, the perception of quantizing noise is studied using speech with noise synthesized similar to the quantizing noise. The detection of quantizing noise is found to be influenced by masking by the source signal. This leads to a new method of objectively estimating the quality of coding speech by multiple regression analysis. The factors for the estimation are segmental signal-to-noise ratio, spectrum envelope distance between source signal and quantizing noise, and the similarity of the noise power envelope to the source signal in the time domain. This estimation method is applied to the parameter optimization of wideband coding systems.     

Stripe noise removal for infrared image by minimizing difference between columns

This paper introduces a novel approach to eliminate stripe noise in infrared images. The differences between bias voltages in column readout circuit of uncooled infrared sensors result in strong stripe noise which changes slowly in time. The problem can be solved by estimating the bias of each column of infrared images and correcting infrared images with the estimated biases. The bias estimation is translated into an energy optimization problem in the paper. The optimization aims to minimize difference between neighboring columns of images. Our approach can be processed on a single image, or in a recursive way in order to significantly reduce the computation in one frame time. Our approach is compared to the state-of-the-art the stripe noise removal method using realistic infrared images, and the experimental results show the effectiveness and efficiencies of our proposed approach.     

虚拟阵列Khatri-Rao积与子空间联合稀疏表示的DOA估计方法

利用目标信号在空域分布的稀疏性,该文提出了一种基于虚拟阵列Khatri-Rao(KR)积与信号子空间联合稀疏表示的单快拍DOA估计方法;该方法利用单次快拍的采样数据,构造出双向虚拟阵列数据,并对虚拟阵列数据的协方差矩阵进行KR积变换处理,然后对向量化后的数据进行顺序重构,利用重构矩阵的大奇异值对应的左奇异向量为估计信号子空间;最后,利用凸优化工具箱对稀疏模型进行二阶凸规划的优化求解,得到高精度的DOA估计值;仿真实验验证了算法的有效性,在低信噪比下比传统MUSIC和OMP算法具有更高的估计精度。     

抛物型方程的演化参数识别方法

给出了一种利用演化计算方法求解微分方程中的参数识别类型反问题的方法。该方法把参数识别问题转化为泛函的优化问题用演化算法来求解,指定待定参数的函数类形式,用遗传算法(Genetic Algorithms)来演化待求参数的最优估计值,并将该方法运用于线性扩散方程和拟线性对流扩散反方程反问题的数值模拟中。     

混沌系统中参数估计的演化建模方法

借助于演化算法的自组织、自适应和自学习特征,本文提出了基于演化算法的参数辨识方案,并利用经典的Lorenz方程进行了数值仿真试验,研究了参数辨识方案对于单参数、双参数以及Lorenz系统三个参数完全未知时的性能.数值试验结果表明,新方法能够很好的对未知参数进行较为快速、准确的辨识,但存在对多个参数同时搜索时速度较慢的缺陷.鉴于此,将演化算法变异操作中的参数变异范围附加一种约束机理,试验结果表明,这一约束机理有效地提高了多参数估计中算法的收敛速度.     

Active vibration control in Duffing mechanical systems using dynamic vibration absorbers

This paper deals with the multi-frequency harmonic vibration suppression problem in forced Duffing mechanical systems using passive and active linear mass–spring–damper dynamic vibration absorbers. An active vibration absorption scheme is proposed to extend the vibrating energy dissipation capability of a passive dynamic vibration absorber for multiple excitation frequencies and, simultaneously, to perform reference position trajectory tracking tasks planned for the nonlinear primary system. A differential flatness-based disturbance estimation scheme is also described to estimate the unknown multiple time-varying frequency disturbance signal affecting the differentially flat nonlinear vibrating mechanical system dynamics. Some numerical simulation results are provided to show the efficient performance of the proposed active vibration absorption scheme and the fast estimation of the vibration disturbance signal.     

Shooter localization and bullet trajectory, caliber, and speed estimation based on detected firing sounds

Shooter localization and estimation of bullet trajectory, caliber and speed have become essential tasks for example in peacekeeping and police assignments. A novel approach for such estimation and localization is presented in this paper, as a numerical estimation method is applied to the problem. Both simulated and recorded gunshot data are considered, as a known bullet shock wave model and detected firing sounds are utilized in creating a likelihood function corresponding to different bullet states. For this, a state-space model of the underlying dynamic system is developed, and a well-known optimization algorithm is used to find the global maximum of the evaluated function. Two different criteria are used to measure the likelihood values, namely the Generalized Cross Correlation (GCC) and the Mean-Squared Error (MSE). The achieved localization and estimation results are accurate and applicable when considering the usability of the method against hostile snipers. The shooter position and bullet state estimation errors vary between 2% and 10%, depending on the estimated parameter at stake.     

A 2D strain estimator with numerical optimization method for soft-tissue elastography

Elastography is a bioelasticity-based imaging modality which has been proved to be a potential evaluation tool to detect the tissue abnormalities. Conventional method for elastography is to estimate the displacement based on cross-correlation technique firstly, then strain profile is calculated as the gradient of the displacement. The main problem of this method arises from the fact that the cross-correlation between pre- and post-compression signals will be decreased because of the signal’s compression-to-deformation. It may constrain the estimation of the displacement. Numerical optimization, as an efficient tool to estimate the non-rigid deformation in image registration, has its potential to achieve the elastogram. This paper incorporates the idea of image registration into elastography and proposes a radio frenquency (RF) signal registration strain estimator based on the minimization of a cost function using numerical optimization method with Powell algorithm (NOMPA). To evaluate the proposed scheme, the simulation data with a hard inclusion embedded in the homogeneous background is produced for analysis. NOMPA can obtain the displacement profiles and strain profiles simultaneously. When compared with the cross-correlation based method, NOMPA presents better signal-to-noise ratio (SNR, 32.6 ± 1.5 dB vs. 23.8 ± 1.1 dB) and contrast-to-noise ratio (CNR, 28.8 ± 1.8 dB vs. 21.7 ± 0.9 dB) in axial normal strain estimation. The in vitro experiment of porcine liver with ethanol-induced lesion is also studied. The statistic results of SNR and CNR indicate that strain profiles by NOMPA performs better anti-noise and target detectability than that by cross-correlation based method. Though NOMPA carry a heavier computational burden than cross-correlation based method, it may be an useful method to obtain 2D strains in elastography.