甘氨酸在Cu(111)表面吸附的扫描隧道显微镜研究

用超高真空扫描隧道显微镜(UHV-STM)研究了室温下甘氨酸在Cu(111)表面的吸附行为.实验发现,在低覆盖度下甘氨酸分子在表面表现为二维气体.当覆盖度足够高时,甘氨酸分子最终会形成二维固相结构,为(4×8)超结构.针对这种结构提出了两种可能的结构模型,模型能够很好地解释STM图.当覆盖度介于气相和固相之间时,根据蒸镀条件和退火条件的不同,表面可能出现两种不同的中间相,一种为条纹结构,另一种为六角结构,对于中间相有待于进一步的研究 关键词： 表面吸附 甘氨酸 铜 扫描隧道显微术     

Adsorption of L-Alanine on Cu（111） Studied by Scanning Tunnelling Microscopy

The adsorption of L-alanine on Cu（111） surface is studied by means of scanning tunnelling microscopy under ultra-high vacuum conditions. The results show that the adsorbates are chemisorbed on the surface, and can form a two-dimensional gas phase, chain phase and solid phase, depending on deposition rate and amount. The adsorbed molecules can be imaged as individual protrusions and parallel chains in gas and chain phases respectively. It is also found that alanine can form （2 × 2） superstructure on Cu（111） and copper step facet to （110） directions in solid phase. On the basis of our scanning tunnelling microscopic images, a model is proposed for the Cu（111）（2 ×2）-alanine superstructure. In the model, we point out the close link between （110）-direction hydrogen bond chains with the same direction copper step faceting.     

Adsorption of atomic oxygen on cubic PbTiO3 and LaMnO3 (001) surfaces: A density functional theory study

We present and discuss density functional theory calculations addressing the electronic structure and energetics of isolated oxygen ad-atoms at the (001) surfaces of PbTiO₃ (PTO) and LaMnO₃ (LMO) cubic perovskites. Both AO- and BO₂-type of surface terminations are considered for each perovskite. Difference electron density analysis has been carried out for each surface to probe local electronic charge redistribution upon oxygen adsorption. Our results show that the (001) surfaces of the two perovskites behave quite differently towards oxygen adsorption. In the case of the PTO (001) surfaces, the adsorbate oxygen atom was found to form a peroxide-type molecular species along with a surface lattice oxygen atom on both PbO- and TiO₂-terminated surface facets. On the other hand, the most stable oxygen adsorption site for the LMO (001) surfaces corresponds to the one expected from a natural continuation of the perovskite lattice. Moreover, the dissociative adsorption of molecular oxygen varies from being only slightly exothermic on the PTO (001) facets to being highly exothermic on the LMO (001) facets. The AO-terminated facets, in general, showed a stronger binding to the adsorbed oxygen.     

Negative‐Imaging of Citrate Layers on Gold Nanoparticles by Ligand‐Templated Metal Deposition: Revealing Surface Heterogeneity

Surface heterogeneity of a metal nanoparticle is typically regarded as boundary defects and various crystalline facets. While organic capping ligands of a single type are assumed to be homogeneously distributed on the nanoparticle surface, heterogeneous surface coverage of citrate molecules on individual facets of gold nanoparticles (AuNPs) is revealed. Pt metallic clusters with 2 nm in diameter, epitaxially grown on the surface of AuNPs by chemical reaction and imaged by high‐resolution transmission electron microscopy, are utilized as negative‐imaging probes for densely packed adlayers where the underneath gold surface may not be accessible for Pt deposition. At pH > 5.0, citrate anions form only a loosely packed layer. At pH 4.5, citrates and citric acids form both loosely packed and densely packed layers that appear phase separated, and the densely packed domain as small as 5 nm × 5 nm is likely composed of fully protonated citric acids. IR spectra indicate that citric acid binds to a surface Au adatom through the oxygen atom of the central hydroxyl group, and similarly, citrate anions bind to Au adatoms through the carboxylate oxygen atom. This study also reveals the role of Au adatom in the adsorption of citrate species on the metallic surface of AuNPs.     

Study of the Initial Stage of Fluorinated C<Subscript>60</Subscript>F<Subscript>18</Subscript> Fullerene Adsorption on the Cu(001) Surface

The dynamics of the adsorption and evolution of fluorinated C₆₀F₁₈ fullerene molecules on the Cu(001) surface are studied by real-time ultra-high vacuum scanning tunneling microscopy. Fluorinated fullerene molecules are shown to decompose with time on the Cu(001) surface transforming to C₆₀ molecules. The decay rate depends on the initial molecular coverage. The rapid decay of fluorinated fullerene molecules is observed when the coverage is no higher than 0.2 single layers. As a result, two-dimensional islands consisting of pure C₆₀ molecules are formed on the Cu(001) surface. 2D islands consisting of fluorinated fullerene molecules are formed when the initial molecular coverage is higher than 0.5 single layers. The molecules inside these islands also tend to decompose with time. It is found experimentally that fluorine atoms are removed completely from the initial C₆₀F₁₈ molecules adsorbed on the Cu(001) surface after 250 h when the initial molecular coverage is 0.6 single layers.     

天冬氨酸在Cu(001)表面吸附的扫描隧道显微镜研究

用扫描隧道显微镜(STM)研究了室温下天冬氨酸在Cu(001)表面的吸附行为.实验发现,在较 低的覆盖度下,天冬氨酸分子在Cu(001)表面存在两种吸附状态.从STM数据估算出两种吸附 状态下天冬氨酸分子在Cu(001)表面的扩散激活能分别为079±001eV,088±005eV. 随着覆盖度的提高,天冬氨酸分子最终在Cu(001)表面形成一均匀衬度的吸附层,但并不形 成有序吸附结构,也不能使台阶发生小面化.天冬氨酸分子的这些吸附特点是迄今研究过的 所有氨基酸在Cu(001)表面吸附时不具有的. 关键词： 表面吸附 扫描隧道显微镜 氨基酸     

Atomic-scale pathway of the pyramid-to-dome transition during ge growth on Si(001)

By high resolution scanning tunneling microscopy, we investigate the morphological transition from pyramid to dome islands during the growth of Ge on Si(001). We show that pyramids grow from top to bottom and that, from a critical size on, incomplete facets are formed. We demonstrate that the bunching of the steps delimiting these facets evolves into the steeper dome facets. Based on first principles and Tersoff-potential calculations, we develop a microscopic model for the onset of the morphological transition, able to reproduce closely the experimentally observed behavior.     

Observation of anthraquinone compounds using low temperature scanning tunneling microscopy

Three derivatives of anthraquinone deposited on Cu(1 1 1) have been observed by STM at liquid nitrogen temperature. Adsorption of the three molecules is found to be strongly dependent on the end group (phenyl, thienyl and pyridyl) surrounding the anthraquinone central part. While adsorption of the bi-pyridyl compound yields single molecules on the copper surface, evaporation of the phenyl derivative leads to the formation of stable dimers. The bi-thienyl anthraquinone has an intermediate behaviour with dimer formation and single molecule adsorption. These findings are assumed to result from the polar character of the molecules and from the bond strength of the different substituents with the metallic surface.     

Spatial variation of au coverage as the driving force for nanoscopic pattern formation

Au induced faceting of a 4 degrees vicinal Si(001) surface was studied with chemical resolution using soft x-ray photoemission electron microscopy. For the first time a direct and quantitative determination of the local Au coverage in situ and during deposition was possible. Au atoms, necessary for the expansion of (001) terraces, are accummulated from a lattice gas, resulting in a phase separation between Au enriched terraces and Au depleted step bunches. During a second stage Au also adsorbs on the step bunches and transforms them into (119) facets. A simple Monte Carlo simulation shows that the initial coverage difference between terraces and bunches determines the regularity of the formed mesoscopic grating.     

Adsorption of water molecules on yttrium barium cuprate superconductors

Gravimetry and thermogravimetric analysis were used to study the adsorption of water molecules on the high temperature superconductor YBa₂Cu₃O₇ at room temperature. It was found that water adsorption subdivides into surface adsorption and bulk adsorption, which starts after the formation at the surface of a physically bound water layer no less than 65–100 Å thick. During bulk adsorption, H₂O molecules diffuse from this surface layer to the lattice, where they form four bound states with desorption temperatures of ～208, 330, 370, and 775°C and heats of formation of 38, 99, 72, and 68 kJ/mol, respectively, and mainly occupy interstitial sites of the intermediate layers. The presence of molecules in the lattice does not affect either the superconducting transition temperature or resistance to direct current; however, it results in an increase in the surface resistance. The resistance to direct current increases due to the formation of dielectric inclusions of other phases.     

Equilibrium shape of rotating helium crystals

We have studied theoretically the effects of rotation on the equilibrium shape of the interface between superfluid and solid helium. Surface structures in the shape of hillocks and ridges appear in the presence of a vortex lattice in the superfluid. These structures are very sensitive to the orientation of the interface boundary with respect to the crystal planes when surface stiffness is very anisotropic, as occurs well below the roughening transition. We predict the appearance of ring shaped facets for fast rotation speeds. These effects should be observable by using optical techniques.     

Thermodynamic analysis of the decomposition of a supersaturated solid solution of the Fe-Cu system

The structure of Fe-5.5% Cu alloy is studied after eutectoid reaction and aging of the martensite. The thermodynamic analysis of decomposition of the supersaturated solid solution with copper release is peformed for different types of crystal lattice. The free energy of solid solutions and phase separation diagrams of the BCC and FCC phases of copper is calculated. Barriers for the nucleation of copper particles with BCC and FCC lattices are evaluated. The factors that favor the appearance of intermediate structural forms of copper preceding the formation of stable FCC phase are discussed.     

Photochemical Synthesis and Properties of Colloidal Copper,Silver and Gold Adsorbed on Quartz

Original methods for the photochemical production of stable copper, silver and gold colloids in the form of films on quartz, and dispersion in liquids were devised. It is shown that photochemical synthesis of colloidal metals is a difficult multiphase process, and includes the formation of low-valence forms of Cu(I), Au(I) and nonmetal clusters, colloidal particles and their agglomerates. Cluster stabilization and further growth to colloidal particles are achieved by adsorption onto the solid surface (quartz) or by increasing the viscosity of photolyte. In the absence of these methods of stabilization, the processes of intermediate reoxidation to Cu(II) and Au(III) and agglomeration of Ag and Au colloids proceed in a photolyte. Adsorption and the rate of cluster growth on a quartz surface are speeded up by the action of monochromatic UV light. Experimental models of the mechanism of colloidal formation are suggested. The dependence of the growth rate and the properties of the colloids on conditions of the photochemical procedure (energy and light intensity, concentration of initial complex) has been established.     

甘氨酸在Cu(001)表面的吸附结构

结合低能电子衍射(LEED)及其消失斑点规律和扫描隧道显微镜(STM)手段确定了室温下甘氨酸在Cu(001)表面能形成c(2×4)和两种(2×4)吸附结构((2×4)₁和(2×4)₂),并推断出在两种(2×4)结构单胞中两甘氨酸分子的羧基相对于衬底的吸附取向一致,而它们的氨基则不同.实验中还观察到c(2×4)与(2×4)₂结构能相互转变成窄条相互穿插共存,这说明几种吸附结构能量相近. 关键词：     

Adsorption site of Cl on Cu(001)

Calculations of the electronic structure of Cl/Cu(001) are used to discriminate between contending adsorption sites from the electron distribution curves in normal photoemission previously reported. Adsorption above surface Cu atoms is ruled out. Either the four-fold-hollow site or a surface reconstruction would be consistent with the data; preliminary angle-resolved data for off-normal emission favour the four-fold-hollow site.     

被羰基镍污染的CO气体在Cu(111)表面的近常压吸附研究

本文利用近常压X射线光电子能谱和近常压扫描隧道显微镜研究了在超高真空(UHV)和近常压条件下,被羰基镍污染的CO气体在Cu(111)表面的吸附过程. 通过控制被污染CO的气体压力,可以在Cu(111)表面上形成Ni-Cu双金属催化剂. 此外,本文探索了CO在所形成的Ni-Cu双金属表面上的吸附和解离过程,并报道了几种CO的高压吸附相结构.     

Solids and supersolids of three-body interacting polar molecules on an optical lattice

We study the physics of cold polar molecules loaded into an optical lattice in the regime of strong three-body interactions, as put forward recently by Büchler et al. [Nature Phys. 3, 726 (2007)]. To this end, quantum Monte Carlo simulations, exact diagonalization, and a semiclassical approach are used to explore hard-core bosons on the 2D square lattice which interact solely by long-ranged three-body terms. The resulting phase diagram shows a sequence of solid and supersolid phases. Our findings are directly relevant for future experimental implementations and open a new route towards the discovery of a lattice supersolid phase in experiment.     

STM studies on the growth of monolayers: Co on Cu(110) with one half monolayer of preadsorbed oxygen

The growth of the first cobalt monolayer (ML) on the Cu(110)-(2×1)O surface was studied by scanning tunneling microscopy. Extensive exchange of Cu and Co atoms takes place in the first stages of the deposition. The displaced Cu atoms form new Cu---O---Co mixed islands, with the same structure as those of the terrace surface. At 0.25 ML Co, a new structure nucleates, which contains three Cu atoms, four Co atoms and two O atoms per 2×2 cell. The structure consists of rows in the [ 10] direction with an internal periodicity of two lattice units. The rows are separated from one another by two lattice units along the [001] direction, and are found both in-phase and out-of-phase relative to one another. The result is a mixed p(2×2) and c(2×4) surface. The fraction of the surface covered by the new structure increases with Co coverage, and completely covers the surface at 1 ML Co.     

Adsorption of hydrogen and hydrocarbon molecules on SiC(001)

Adsorption of hydrogen and hydrocarbon molecules on semiconductor surfaces plays a key role in surface science and technology. Most studies have employed silicon (Si) as a substrate because of its paramount technological importance and scientific interest. However, other semiconductor substrates are gaining an increasing interest as well. Silicon carbide (SiC), which is a material with very special properties allowing developments of novel devices and applications, offers particularly fascinating new degrees of freedom for exceptional adsorption behaviour. For example, a very unusual hydrogen-induced metallization of a SiC(001) surface has been reported and hydrogen molecules show very different adsorption behaviour on different SiC(001) reconstructions although the latter exhibit very similar surface dimers. In marked contrast to the Si(001) surface, the adsorption of hydrocarbon molecules on SiC(001) can yield structurally well-defined adlayers in favourable cases which may have large potential for organic functionalization. We review and discuss theoretical ab initio results on conceivable adsorption scenarios of atomic and molecular hydrogen as well as acetylene, ethylene, butadiene, benzene and cyclohexadiene on various reconstructions of the SiC(001) surface. The main emphasize is on a detailed understanding of these adsorption systems and on identifying the physical origin of the particular adsorption behaviour. The results will be discussed in the light of related adsorption events on the Si(001) surface and in comparison with available experimental data.     

Thermal accomodation coefficients by high speed vibration of solid samples: I. Method and apparatus

A method and apparatus to determine thermal accommodation coefficients are described in which solid samples are vibrated at high velocity in the presence of a test gas at low pressure. Energy transfer between the incident gas molecules and the moving surface causes an increase in the solid temperature which is related to, and approximately proportional directly to the thermal accommodation coefficient and inversely to the emissivity. The apparatus may be used over a wide range of temperatures and pressures in the long mean-free-path region with many types and forms of solid samples. Measurements as a function of pressure may yield information on internal energy accommodation, as well as translational accommodation, in favorable circumstances. Results at room temperature for O₂, N₂, and Ar on uncoated and greased Pt, Ni, and Cu surfaces, and on carbon coated Pt are presented.