Functionalized SBA-15 materials for bilirubin adsorption

To investigate the driving force for bilirubin adsorption on mesoporous materials, a comparative study was carried out between pure siliceous SBA-15 and three functionalized SBA-15 mesoporous materials: CH₃-SBA-15 (MS), NH₂-SBA-15 (AS), and CH₃/NH₂-SBA-15 (AMS) that were synthesized by one-pot method. The obtained materials exhibited large surface areas (553-810 m²/g) and pore size (6.6-7.1 nm) demonstrated by XRD and N₂-ad/desorption analysis. The SEM images showed that the materials had similar fiberlike morphology. The functionalization extent was calculated according to ²⁹Si MAS NMR spectra and it was close to the designed value (10%). The synthesized mesoporous materials were used as bilirubin adsorbents and showed higher bilirubin adsorption capacities than the commercial active carbon. The adsorption capacities of amine functionalized samples AMS and AS were larger than those of pure siliceous SBA-15 and MS, indicating that electrostatic interaction was the dominant driving force for bilirubin adsorption on mesoporous materials. Increasing the ionic strength of bilirubin solution by adding NaCl would decrease the bilirubin adsorption capacity of mesoporous material, which further demonstrated that the electrostatic interaction was the dominant driving force for bilirubin adsorption. In addition, the hydrophobic interaction provided by methyl groups could promote the bilirubin adsorption.     

Direct synthesis and characterization of highly ordered functional mesoporous silica thin films with high amino-groups content

A series of continuous, crack-free, highly ordered amino-functionalized mesoporous silica thin films have been directly synthesized by co-condensation of tetraethoxysilane (TEOS) and 3-aminopropyltriethoxysilane (APTES) in the presence of cationic CH₃(CH₂)₁₅N⁺(CH₃)₃Br⁻ (CTAB), nonionic C₁₆H₃₃(OCH₂CH₂)₁₀OH (Brij-56) or triblock copolymer H(OCH₂CH₂)₂₀(OCH(CH₃)CH₂)₇₀(OCH₂CH₂)₂₀)OH (P123) surfactant species under acidic conditions by sol-gel dip-coating. The molar ration of APTES/(TEOS + APTES) in the starting sol attains a value of 0.4. The effect of the sol aging on the mesostructure of thin films is systematically studied, and the optimal sol aging time is obtained for different surfactant systems. The amino-functionalized mesoporous silica thin films exhibit long-range ordering of 2D hexagonal (p6mm) and 3D cubic (Fm3m) pore arrays of size range from 2.2 to 8.3 nm following surfactants extraction as demonstrated by XRD, TEM and physical adsorption techniques. Based on BET surface area and weight loss, the surface coverage of amino-groups for thin films prepared using different surfactants is calculated to be 3.2 and above amino-groups per nm², which is very useful and promising for incorporating inorganic ions and biomolecules into these mesoporous silica materials.     

Highly selective fluorescent chemosensor for detecting Hg(II) in water based on pyrene functionalized core–shell structured mesoporous silica

Novel pyrene functionalized mesoporous core–shell structured silica (denoted as SiO₂@mSiO₂/Py-Si) was designed and synthesized as a highly selective fluorescent chemosensor for detecting Hg²⁺ in water. The core–shell structured silica was prepared by a simple sol–gel process through coating SiO₂ nanospheres with a layer of ordered mesoporous silica. The surface of outer mesoporous silica shell was then further functionalized by the fluorescent chromophore alkoxysilane modified pyrene (Py-Si). XRD data confirmed that the hexagonal ordered mesoporous structure was preserved after functionalization. The chemosensing material successfully exhibited a remarkable “turn on” response toward Hg²⁺ over miscellaneous metal ions. A good linear response towards Hg²⁺ in the concentration range of 10^?8–10^?4 M was constructed with R²=0.9913. Most importantly, a satisfactory detection limit of 3.4×10^?9 g mL^?1 (down to ppb level) was obtained, which is 100 times lower than our previous report of covalently grafted Py-OH to the bulk mesoporous silica SBA-15. These results indicated that SiO₂@mSiO₂/Py-Si can be used as a highly selective and sensitive fluorescence sensor for Hg²⁺.     

Structure and acid-base properties of surface-modified mesoporous silica

A series of surface-modified mesoporous silica endowing with acid-base properties have been successfully synthesized in one pot by in situ introduction of zirconium and magnesium salts into the initial mixture of synthesizing mesoporous silica (SBA-15) and this method combines into a single step to form a novel material with a periodically ordered mesoporous backbone and specific chemical reactivity of the acid-basic sites. X-ray diffraction, high-resolution transmission electron microscopes (HRTEM), N₂ adsorption, FT-IR transmission spectra, ²⁹Si MAS NMR spectra, NH₃- and CO₂-temperature programmed desorption (TPD) are employed to characterize the titled mesoporous materials. The results indicate that the product possesses excellent acid-basic properties with well mesoporous structure, which make it promising for their application in heterogeneous catalysis and adsorption-separation processes.     

Core-shell structured mesoporous silica nanoparticles equipped with pyrene-based chemosensor: Synthesis, characterization, and sensing activity towards Hg(II)

In this paper, we construct core-shell structured mesoporous silica nanoparticles with spherical SiO₂ as the core and mesoporous silica as the shell, offering both large surface-area-to-volume-ratio and short channels. With this core-shell structured mesoporous silica nanoparticles as supporting medium, a chemosensor of pyrene, owing advantages of large Stokes shift, high quantum yield and excellent photostability, is grafted into the channels of the nanoparticles, aiming at a Hg(II) detector with quick response and high selectivity. The sensing performance of the resulting composite material is investigated in detail. Data suggest that the composite material is thermally stable enough for actual applications and highly selective towards Hg(II), and a linear response with detection limit of 10⁻⁸ mol/L is finally realized, which means that it is a promising biochemo-sensing material for Hg(II) detection.     

Novel luminescent hybrid materials by covalently anchoring 2-[3-(triethoxysilyl) propyl-1H-Benz [de]isoquinoline-1, 3(2H)-dione to bimodal mesoporous materials

We report on the synthesis of luminescent hybrid mesoporous materials (LHMS) by covalently anchoring 2-[3-(triethoxysilyl) propyl-1H-Benz [de]isoquinoline-1, 3(2H)-dione to bimodal mesoporous materials (BMMs) through postsynthesis methods. The resulting samples were characterized by powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), N₂ adsorption/desorption isotherms, transmission electron microscopy (TEM), ²⁹Si NMR analysis, elemental analysis, and fluorescence measurements. The results revealed that luminescent organic molecules have been successfully introduced into the pore channels of BMMs without disrupting the structure, whereas the ordering degree of BMMs framework decreased after functionalization. The obtained materials (LHMS-10) showed excellent luminous performance, and the emission peak shifted to a lower wavelength in comparison with that of pure luminescent dyes (from 464 to 454 nm) because of the polarity of the silica matrix. And the amount of fluorescence molecule had some influence on the luminescence behavior, which was also investigated and discussed. It can be concluded that the fluorescence properties of the dye molecule can be controlled at will by the loading amount.     

Relationship between surface structure and morphology of Fe3O4/silica composite nanospheres and nucleic acid extraction

Fe₃O₄/silica composite nanospheres with different surface structure and morphology were synthesized by changing reaction conditions. As-synthesized nanospheres were characterized by high performance particle sizer (HPPS), transmission electron microscopy (TEM), nitrogen adsorption and thermogravimetry (TGA). Besides thoroughly characterization, the particles were used for DNA extraction. We found that the particle surface structure and morphology affected the nucleic acid extraction efficiency. When comparing different samples with the same silanol density (10¹⁸), the one with a surface area of 60.37 m²/g extracted DNA most effectively. Also, with increasing silanol density per surface area, DNA extraction efficiency increased.     

Iron oxide nanoparticles stabilized inside highly ordered mesoporous silica

Nanosized iron oxide, a moderately large band-gap semiconductor and an essential component of optoelectrical and magnetic devices, has been prepared successfully inside the restricted internal pores of mesoporous silica material throughin-situ reduction during impregnation. The samples were characterized by powder XRD, TEM, SEM/EDS, N₂ adsorption, FT-IR and UV-visible spectroscopies. Characterization data indicated well-dispersed isolated nanoclusters of (Fe₂O₃) _n , within the internal surface of 2D-hexagonal mesoporous silica structure. No occluded Fe/Fe₂O₃ crystallites were observed at the external surface of the mesoporous silica nanocomposites. Inorganic mesoporous host, such as hydrophilic silica in the pore walls, directs a physical constraint necessary to prevent the creation of large Fe₂O₃ agglomerates and enables the formation of nanosized Fe₂O₃ particles inside the mesopore     

Turn-off Fluorescence Chemosensor for Iron with Bis(2-aminoethyl)-2-(9-fluorenyl)malonamide Functionlized SBA-15

An bis(2-aminoethyl)-2-(9-fluorenyl)malonamide as fluorophore ligand was immobilized onto mesoporous silica type SBA-15 via post synthesis grafting. The obtained material was characterized by small and wide angle X-ray diffraction, N₂ adsorption–desorption, Fourier transform infrared spectroscopy, Raman spectroscopy and thermogravimetric analysis that indicate the successful immobilization of the ligand on the surface of mesoporous silica. The sensing ability of the obtained material was studied by addition of the cations Fe³⁺, Mg²⁺, Cr³⁺, Co²⁺, Ni²⁺, Cu²⁺, Hg²⁺ and Zn²⁺ to water suspensions of the assayed solid. Of all the cations tested addition of Fe³⁺ ion to a suspension of this material resulted in the largest decrease in the fluorescence intensity. Turn-off photoluminescence of this material was remarkably observed for iron ions in comparing of the other cations. A good linearity between the fluorescence intensity of this material and the concentration of Fe³⁺ ion is constructed, which enables it as a fluorescence chemosensor for detecting the Fe³⁺ ion with a suitable detection limit of 1.35?×?10^?5. It can be introduced as a novel fluorescent sensor in aqueous solution for a lot of practical applications in chemical, environmental and biological systems.     

硫和银共掺杂介孔TiO2的制备、表征及其对染料的光催化降解活性

以P123为模板,以钛酸四正丁酯、硝酸银和硫脲为原料采用模板法制备了一系列硫和银共掺杂介孔TiO₂光催化材料．利用SEM、XRD、BET和紫外-可见光谱等技术对其形貌、晶体结构及表面结构、光吸收特性等进行了表征．以甲基橙溶液的光催化降解为模型反应,考察了不同掺杂量的样品在紫外和可见光下的光催化性能．结果表明,用模板法制备的共掺杂介孔TiO₂光催化材料在紫外和可见光条件下较纯介孔TiO₂和单掺杂介孔TiO₂对甲基橙溶液具有更好的光催化降解效果, 且硫和银的掺杂量及样品焙烧温度显著影响该材料的催化性能．当硫掺杂量为2mol%和银掺杂量为1mol%,在500 oC 焙烧2 h所得光催化材料的催化性能最佳,4 h即可使甲基橙的降解率达98.8%,重复使用4次仍可使甲基橙的降解率保持在87.5%以上     

Effect of drying technique on the physicochemical properties of sodium silicate-based mesoporous precipitated silica

The conventional drying (oven drying) method used for the preparation of precipitated mesoporous silica with low surface area (>300 m²/g) and small pore volume is often associated with a high production cost and a time consuming process. Therefore, the main goal of this study was to develop a cost-effective and fast drying process for the production of precipitated mesoporous silica using inexpensive industrial grade sodium silicate and spray drying of the precipitated wet-gel silica slurry. The precipitated wet-gel silica slurry was prepared from an aqueous sodium silicate solution through the drop-wise addition of sulfuric acid. Mesoporous precipitated silica powder was prepared by drying the wet-gel slurry with different drying techniques. The effects of the oven drying (OD), microwave drying (MD), and spray drying (SD) techniques on the physical (oil, water absorption, and tapping density), and textural properties (specific BET surface area, pore volume, pore size, and % porosity) of the precipitated mesoporous silica powder were studied. The dried precipitated mesoporous silica powders were characterized with field-emission scanning electron microscopy; Brunauer, Emmett and Teller and BJH nitrogen gas adsorption/desorption methods; Fourier-transform infrared spectroscopy; thermogravimetric and differential analysis; N₂ physisorption isotherm; pore size distribution and particle size analysis. There was a significant effect of drying technique on the textural properties, such as specific surface area, pore size distribution and cumulative pore volume of the mesoporous silica powder. Additionally, the effect of the microwave-drying period on the physicochemical properties of the precipitated mesoporous silica powder was investigated and discussed.     

Application of mesoporous carbon and modified mesoporous carbon for treatment of DMF sewage

Mesoporous carbon (MC) was prepared in soft template, and potassium ferricyanide was added into MC to prepare the modified mesoporous carbon (MMC). TEM, SEM, FT-IR, and N₂ adsorption–desorption were used to characterize the textural properties of mesoporous materials. The BET specific surface area, pore volume, and the pore size of MC and MMC were 607.6321 and 304.7475 m²/g, 0.313552 and 0.603573 cm³/g, and 5.4356 and 7.9227 nm, respectively. The adsorption capabilities of MC and MMC were compared with the silica mesoporous material MCM-41. The influences of different adsorption conditions were optimized. For MC, the optimums of adsorbent dose, DMF initial concentration, rotating speed, and pH were 0.002 mg/50 mL, 200 mg/L, 200 r/min, and 4, respectively. MMC showed the highest DMF adsorption capacity at adsorbent dose 0.002 g/50 mL, DMF initial concentration 1000 mg/L, rotating speed 1000 r/min, pH more than 9, and contact time of less than 20 min. Meanwhile for MC, MMC, Pseudo-second-order equation was used to fit adsorption kinetics data. And adsorption process could be well fitted by Langmuir and Freundlich adsorption isotherms of MC, MMC. The results showed that MMC was a perfect adsorbent for DMF, and it was easy to separation and recycle. The recycling property of MMC was still relatively better than other two adsorbents.     

HLDPE/organic functionalized SiO2 nanocomposites with improved thermal stability and mechanical properties

High-pressure low-density polyethylene (HLDPE)/organic functionalized SiO₂ nanocomposites were synthesized using melt-blending technique in a sigma internal mixer. The properties of the nanocomposites were studied using two different organic functional modifiers: diglycidyl ether of bisphenol-A (DGEBA) and triacetoxyvinylsilane. Reinforcing, thermal stability and toughening effects of organic functionalized nanosilica on the polymer matrix were found at loading of 2.5% nanosilica functionalized with 2.8% of DGEBA and silane coupling agent respectively. Organic functionalization on the nanosilica particle surface led to different microstructures when compared with that of the pure polymer. Organic functionalization on the nanosilica particle surface produced good interfacial adhesion and homogeneous dispersion in the polymer matrix, while the use of nanosilica resulted in aggregated silica particles in the polymer matrix. There was no significant improvement in thermal stability and mechanical properties when only nanosilica was added to the pure polymer. On the contrary, the addition of pretreated nanosilica with organic functional modifiers led to an increase of thermal stability from 313–363°C, elastic modulus and toughness from 0.12–0.18 GPa and 3.23–9.81 MJ/m³ respectively.     

Mechanochemically conjugated PMHS/nano-SiO2 hybrid and subsequent optimum grafting density study

In this paper, we reported the preparation of poly(methylhydrosiloxane) (PMHS)/SiO₂ hybrid particles by mechanochemical method based on high energy ball milling (HEBM). The obtained hybrid particles were characterized by Fourier transform infrared (FT-IR) spectroscopy, ²⁹Si CP (cross-polarization) MAS NMR, viscosity measurement, particle size distribution, thermal analysis (TGA, DSC and DTG), static contact angle (CA), field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). FT-IR and ²⁹Si CP MAS NMR spectra indicate that PMHS is chemically anchored onto the surface of nano-SiO₂. Viscosity measurement, particle size distribution, FE-SEM and TEM demonstrate that an appropriate grafting density optimizes the dispersion of nanoparticles in poly(dimethylsiloxane) (PDMS) matrix, so lower viscosity can be achieved. Too high or too low grafting density may only achieve suboptimal and poor dispersions. The optimum grafting density of PMHS on nano-SiO₂ was determined by thermal analysis, with approximately 0.0531 PMHS/nm². Static contact angle measurement indicates that the water contact angle of hybrid particles is modulated by changing the grafting density of PMHS on nano-SiO₂. The CA value of PMHS/SiO₂ hybrid with optimum grafting density is 139.4°, and the highest CA value of PMHS/SiO₂ hybrid is approximately 158.2°.     

Preparation and electrochemical properties of mesoporous Co3O4 crater-like microspheres as supercapacitor electrode materials

Mesoporous Co₃O₄ microspheres with unique crater-like morphology were obtained by utilizing the mesoporous silica material MCM-41 as a template. The analysis results of N₂ adsorption–desorption measurement indicate that the product has a large Brunauer–Emmett–Teller (BET) surface area of 60 m² g⁻¹ and a narrow pore size distribution centering around 3.7 nm. Its electrochemical properties were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements. The findings reveal that this novel morphology material has a smaller inner resistance of about 0.4 Ω and a higher onset frequency of 550 Hz. This material can provide a high specific capacitance of 102 F g⁻¹ and a large capacity retention of 74% in 500 continuous cycles test at a sweep rate of 3 mV s⁻¹. More significantly, the mass loading of electroactive species can reach as large as 2 mg cm⁻², which is one order of magnitude larger than common amount used.     

Comparison of Eu(NO<Subscript>3</Subscript>)<Subscript>3</Subscript> and Eu(acac)<Subscript>3</Subscript> precursors for doping luminescent silica nanoparticles

In this study, we report the comparison between Eu³⁺-doped silica nanoparticles synthesized by Stöber method using Eu(NO₃)₃ or Eu(acac)₃ as precursors. The impact of different europium species on the properties of the final silica nanospheres is investigated in details in terms of size, morphology, reachable doping amount, and luminescence efficiency. Moreover, the results obtained for different thermal treatments are presented and discussed. It is shown that the organic complex modify the silica growing process, leading to bigger and irregular nanoparticles (500–800 nm) with respect to the perfectly spherical ones (400 nm) obtained by the nitrate salt, but their luminescence intensity and lifetime is significantly higher when 800–900 °C annealing is performed.     

Ultrasonic-assisted ultra-rapid synthesis of monodisperse meso-SiO2@Fe3O4 microspheres with enhanced mesoporous structure

A core–shell-type of meso-SiO₂@Fe₃O₄ microsphere was synthesized via an ultrasonic-assisted surfactant-templating process using solvothermal synthesized Fe₃O₄ as core, tetraethoxysilane (TEOS) as silica source, and cetyltrimethyl ammonium bromide (CTAB) as templates. The samples were characterized by FT-IR, XRD, TEM, N₂ adsorption–desorption technology, and vibrating sample magnetometer (VSM). The results show that as-prepared meso-SiO₂@Fe₃O₄(E) and meso-SiO₂@Fe₃O₄(C) microspheres, treated by acetone extraction and high temperature calcination, respectively, still maintain uniform core–shell structure with desirable mesoporous silica shell. Therein, the meso-SiO₂@Fe₃O₄(E) microspheres possess a distinct pore size distribution in 1.8–3.0 nm with large specific surface area (468.6 m²/g) and pore volume (0.35 cm³/g). Noteworthily, the coating period of this ultrasonic-assisted method (40 min) is much shorter than that of the conventional method (12–24 h). The morphology of microspheres and the mesoporous structure of silica shell are significantly influenced by initial concentration of CTAB (C_CTAB), ultrasonic irradiation power (P) and ultrasonic irradiation time (t). The acceleration roles of ultrasonic irradiation take effect during the whole coating process of mesoporous silica shell, including hydrolysis-condensation process of TEOS, co-assembly of hydrolyzed precursors and CTAB, and deposition of silica oligomers. In addition, the use of ultrasonic irradiation is favorable for improving the homogeneity of silica shell and the monodispersity of meso-SiO₂@Fe₃O₄ microspheres.     

Photophysical Properties of Lanthanide Hybrids Covalently Bonded To Functionalized MCM-41 by Modified Aromatic Carboxylic Acids

MCM-41 mesoporous silica has been functionalized with aromatic carboxylic acids salicylic acid (Sal) and 2-hydroxyl-3-methylbenzoic acid (HMBA) through co-condensation approach of tetraethoxysilane (TEOS) in the presence of the cetyltrimethylammonium bromide (CTAB) surfactant as a template. Organic ligands salicylic acid or 2-hydroxyl-3-methylbenzoic acid grafted to the coupling agent 3-(triethoxysilyl)-propyl isocyanate (TEPIC) was used as the precursor for the preparation of an organic–inorganic hybrid materials. Novel organic–inorganic mesoporous luminescent hybrid containing Ln³⁺ (Tb³⁺, Eu³⁺) complexes covalently attached to the functionalized ordered mesoporous MCM-41, which were designated as Ln-Sal-MCM-41 and Ln-HMBA-MCM-41, respectively, were obtained by sol–gel process. The luminescence properties of these resulting materials were characterized in detail, and the results reveal that luminescent mesoporous materials have high surface area, uniformity in the mesopore structure and good crystallinity. Moreover, the mesoporous material covalently bonded Tb³⁺ complex (Tb-Sal-MCM-41 and Tb-HMBA-MCM-41) exhibit the stronger characteristic emission of Tb³⁺ and longer lifetime than the corresponding Eu-containg materials Eu-Sal-MCM-41 and Eu-HMBA-MCM-41 due to the triplet state energy of modified organic ligands Sal-TEPIC and HMBA-TEPIC match with the emissive energy level of Tb³⁺ very well. In addition, the luminescence lifetime and emission quantum efficiency of ⁵D₀ Eu³⁺ excited state also indicates the efficient intramolecular energy transfer process in Tb-SAL-MCM-41 and Tb-HMBA-MCM-41.     

Effect of the thermal and hydrothermal treatment on textural properties of Zr-MCM-41 mesoporous molecular sieve

Zr-containing mesoporous molecular sieves were synthesized by hydrothermal method using cetyltrimethyl ammonium bromide as a template and sodium silicate and zirconium sulfate as raw materials. The structure and morphology of the synthesized samples were characterized via various physicochemical methods, including X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, solid state nuclear magnetic resonance (²⁹Si MAS-NMR) techniques, thermal gravimetric-differential scanning calorimeter (TG-DSC) and N₂ physical adsorption, respectively. The effect of the different initial ZrO₂:SiO₂ molar ratio, the different thermal treatment temperature and the different hydrothermal treatment time on textural property was investigated. The experimental results reveal that the as synthesized samples possess a typical mesoporous structure of MCM-41. On the other hand, the specific surface area and pore volume of the synthesized Zr-MCM-41 mesoporous molecular sieve decrease with the increase of the amount of zirconium incorporated in the starting material, the rise of thermal treatment temperature and the prolonging of hydrothermal treatment time, the mesoporous ordering becomes poor. Also, when the molar ratio of ZrO₂:SiO₂ in the starting material is 0.1, the mesoporous structure of the Zr-MCM-41 mesoporous molecular sieve still retains after calcination at 750 °C for 3 h or hydrothermal treatment at 100 °C for 6 d, and have specific surface areas of 423.9 and 563.9 m²/g, respectively.     

Synthesis of nanoporous TiO2 materials using a doubly surfactant system and applying them as useful adsorbents

Hydrothermal and non-hydrothermal nanoporous TiO₂ materials were synthesized via a doubly surfactant route by using cationic cetyltrimethylammonium bromide and anionic sodium dodecyl sulfate surfactants as the molecular template/structure directing agent. Hydrothermal treatment was performed for comparison. The bulk chemical and phase compositions, crystalline structures, particle morphologies, thermal stabilities and surface texturing were determined by means of X-ray powder analysis, SEM and N₂ sorptiometry. The nanoporous TiO₂ materials were found to have a spherical morphology with a diameter range of 50–200 nm and a high surface area (390 m² g^?1). Hydrothermal and non-hydrothermal nanoporous TiO₂ materials were applied for adsorption of heavy metal cations and the toxic organic compound, copper phthalocyanine, from water for evaluation of their adsorption properties. Both nanoporous TiO₂ materials were found to have similar adsorption capacities toward heavy metal cations and CuPc. Both hydrothermal and non-hydrothermal TiO₂ nanoporous materials were found to have very good potential for application as a new adsorbent especially for adsorbing heavy metal cations from wastewaters.