Surfactant‐assisted specific‐acid catalysis of Diels–Alder reactions in aqueous media

Surfactant‐assisted specific‐acid catalysis (SASAC) for Diels–Alder reactions of dienophiles 1 and 4 with cyclopentadiene 2 in aqueous media at 32 °C was studied. This study showed that acidified anionic surfactants (pH 2) such as sodium dodecyl sulfate (SDS) and linear alkylbenzene sulfonic acid (LAS) accelerate Diels—Alder reactions. Conversely, under similar reaction conditions (pH 2) these reactions are inhibited by (acidified) cationic surfactants such as dodecyltrimethylammonium bromide (DTAB), dodecyldimethylammonium bromide (DDAB), and dodecylmethylammonium bromide (DMAB). A modest rate acceleration resulting from the surfactant hydrogen‐bonding capacity is also recorded for the Diels–Alder reaction of naphthoquinones ( 6 ) with cyclopentadiene ( 2 ) in aqueous media at 32 °C. Copyright © 2007 John Wiley & Sons, Ltd.     

Theoretical Study on Mechanism of Cycloadditional Reaction Between Dichloro-Germylidene and Formaldehyde

用MP2/6-31G^*方法研究了单线态二氯亚甲基锗烯与甲醛环加成反应的反应机理,该反应有两条相互竞争的主反应通道,同时伴随着两中间体(INT3和INT4)副产物的生成. 第一条主反应通道所生成的物种为三员环中间体(INT1)和Ge-O顺位的四员环产物(P1);第二条主反应通道所生成的物种为Ge-O对位的扭曲四员环中间体(INT2)和氯迁移产物(P2);P1和INT2分别与甲醛(R2)的进一步作用而导致了两副产物的生成.     

A computational exploration of the mechanisms for the acid‐catalytic urea–formaldehyde reaction: new insight into the old topic

Some initial acid‐catalytic reactions involved in the synthesis of the urea‐formaldehyde resin were theoretically investigated at B3LYP and MP2 levels with solvent effects included. The results suggest that the addition between urea and formaldehyde in neutral condition undergoes with a concerted mechanism represented by a four‐member ring transition state. For this reaction, a notable barrier (above 130 kJ/mol) was identified at all theoretical levels. The reactions between urea and different protonated forms of formaldehyde in acid solution were investigated. The reaction between protonated methanediol with urea can produce the methylol urea cation via an S_N2 transition state with a lower barrier of 54.8 kJ/mol. With the mediation of a water molecule, the intra‐molecular proton transfer produces the stable methylol carbonium (NH₂CONHCH₂⁺), which plays an important role in the following formation of methylene and methylene ether linkages. Copyright © 2011 John Wiley & Sons, Ltd.     

金膜表面等离激元诱导邻巯基苯甲酸脱羧反应的表面增强拉曼光谱研究

贵金属纳米结构表面等离激元共振（SPR）因其广泛的用途而备受关注,它不仅可以催化某些特殊的表面反应,同时还能产生表面增强拉曼散射效应（SERS）,极大增强分子的表面拉曼信号,因此两者结合后可在纳米结构表面采用SERS光谱跟踪SPR催化反应。目前此类研究主要集中在氮氮（N═N）偶联,因此亟待拓展SPR反应种类及提高催化活性和效率。采用SERS光谱研究邻巯基苯甲酸（OMBA）分子在金纳米粒子单层膜（Au MLF）表面的脱羧行为。通过气液界面组装法制备“热点”分布均匀的金纳米粒子单层膜,以此作为基底,探讨了溶液pH值、激光功率及激光照射时长对该基底表面脱羧反应的影响。研究结果表明,吸附在Au MLF表面的OMBA分子在表面等离激元驱动下碱性和中性介质中发生脱羧基反应,生成苯硫酚（TP）,且碱性中反应活性大于中性溶液。在酸性介质中几乎不发生脱羧反应。较强的激光功率,脱羧反应的活性越高;产物SERS强度的增加与激光照射时间成线性关系,时间延长可提高脱羧反应的产率。这为拓展SPR驱动的光催化反应及深入理解其反应机理提供了实验依据。     

A theoretical study on the bimolecular reactions encountered in the pyrolysis of acetamide

Bimolecular reactions of acetamide with acetamide itself, acetimidic acid and acetic acid are investigated to account for the formation of the three major experimental products from the pyrolysis of acetamide, namely ammonia, acetic acid and acetonitrile. This mechanism involves bimolecular deammonation reactions to form acetamide anhydride, acetic anhydride and N‐acetyl acetamide, and the subsequent fragmentation of these intermediates into acetic acid and acetonitrile. It is found that the overall reaction barrier for the formation of the three major experimental products from the bimolecular reaction of acetamide with its enol form (acetimidic acid) amount to a 36.1 kcal/mol barrier. This barrier is in excellent agreement with the corresponding experimental data from the self‐condensation of acetamide. This finding stresses on the role of acetimidic acid as a major intermediate in the pyrolysis of acetamide. The calculated activation barriers for the two available pathways in the bimolecular reaction of acetamide and acetic acid into imide and N‐acetyl acetamide (36.3 kcal/mol and 24.0 kcal/mol) is in accord with the corresponding experimental activation energy of 30.1 kcal/mol for the autocatalytic reaction of acetamide with the acetic acid. Reaction rate constants are obtained for all plausible reactions. Kinetic data presented herein should be instrumental in building a robust model for the decomposition of N‐alkylated amides, that is, a major structural entity in biomass. Copyright © 2011 John Wiley & Sons, Ltd.     

A mechanistic dichotomy in concerted versus stepwise pathways in hydride and hydrogen transfer reactions of NADH analogues

A mechanistic dichotomy of one‐step versus stepwise pathways in hydride and hydrogen transfer reactions of NADH analogues is discussed including the relation between two pathways: a continuous change versus a discontinuous change of the mechanism. Examples of stepwise electron–proton–electron transfer through a charge transfer (CT) complex in hydride transfer from NADH analogues to hydride acceptors are presented including the detection and the reactivity of the intermediate, that is, radical cations of NADH analogues. The relation between stepwise versus one‐step mechanisms of hydride and hydrogen transfer reaction of NADH analogues is also clarified by showing examples of the change of the mechanism including the borderline. Copyright © 2008 John Wiley & Sons, Ltd.     

On the primary thermal decomposition pathways of hydroxycinnamic acids

Valorization of pyrolytic lignin to fuels and chemicals is still poorly understood due to its ill-defined structure and the complexity of the decomposition chemistry. To shed some light on the dominant reaction pathways of lignin thermolysis, novel experimental and first-principles based calculations of its building blocks have been carried out. Pyrolysis chemistry of hydroxycinnamic acids is investigated in this work using a unique Py-GC × GC-FID/TOF-MS coupled with a customized GC to detect water and gases, to gain an understanding of the role of the branching ratios in lignin and its linkages with hemicellulose. Mean residence times of cinnamic and ferulic acids were estimated to be 12 and 21 s at 573 K, based on time-resolved experiments. Cinnamic acid undergoes a CO₂ elimination reaction at temperatures higher than 873 K without an intermediate liquid phase. At temperatures as low as 573 K, –OH and –OCH₃ substituted cinnamic acids underwent decarboxylation despite bearing similar BDEs for Cβ–Cγ scission. At these temperatures, p-coumaric and ferulic acids were converted into 4-vinylphenol and 4-vinylguaiacol by 40 wt% and 30 wt%, respectively. On the other hand, sinapinic acid converted nearly by 80 wt% at temperatures below its boiling point of 676 K. In conjunction with novel quantum chemical calculations, it could be ruled out that decarboxylation was not occurring via concerted unimolecular reactions at low temperatures. Instead, water-catalyzed reactions of hydroxycinnamic acids seem to be the primary cause for the CO₂ elimination in the intermediate liquid phase via a 6-centered transition state.     

Regioselectivity and stereoselectivity of Diels–Alder reaction: a DFT study on the functionalization of organic semiconductor crystals

Diels–Alder (DA) reaction is one of the most commonly tools in functionalizing organic semiconductor crystals. The DA reactions of two organic semiconductors, i.e. tetracene ( 1 ) and rubrene ( 2 ), to several dienophiles ( 3 to 7 ) were performed experimentally recently. But the kinetics and mechanism of stereoselectivity and regioselectivity remain unknown. In the current study, all related 20 DA reactions (totally 32 possible pathways) were investigated by density functional theory. It was found that the reaction of 7 and a–b position of 1 is the most favorable one. The c–d position of 2 is more reactive than its a–b position when 2 combines with 3 , but is less reactive when combines with 4 to 7 . The endo and exo pathways have similar activation barriers in each reaction. The rate coefficients were calculated using the canonical variational transition state theory and their Arrhenius expressions were fitted. The theoretical conclusion agrees with the experimental observations and is of general importance for similar reactions. Solvent has a slight effect on these reactions. Copyright © 2016 John Wiley & Sons, Ltd.     

Reactions of chlorination with tert‐butyl hypochlorite (TBuOCl)

The chlorination reactions of nitrogenous organic compounds (2,2,2‐trifluoroethylamine, benzylamine, glycine, and dimethylamine) by tert‐butyl hypochlorite (^tBuOCl) were studied at 25 °C, ionic strength 0.5 M and under isolation conditions. The kinetic results obtained in the formation processes of the corresponding N‐chloramines in acid medium (pH = 5–7) are summarized in this paper. Kinetic studies showed a first order with respect to ^tBuOCl concentration. The chlorination reactions involving benzylamine, glycine and dimethylamine were all first order with respect to nitrogenous compound concentration and approximately ?1 order with respect to proton concentration. The reaction with 2,2,2‐trifluoroethylamine was more complex, and the order of reaction with respect to the amine varied with pH. Copyright © 2014 John Wiley & Sons, Ltd.     

A paradigm shift in rate determining step from single electron transfer between phenylsulfinylacetic acids and iron(III) polypyridyl complexes to nucleophilic attack of water to the produced sulfoxide radical cation: a non‐linear Hammett

Mechanism of oxidative decarboxylation of phenylsulfinylacetic acids (PSAAs) by iron(III) polypyridyl complexes in aqueous acetonitrile medium has been investigated spectrophotometrically. An initial intermediate formation between PSAA and [Fe(NN)₃]³⁺ is confirmed from the observed Michaelis–Menten kinetics and fractional order dependence on PSAA. Significant rate retardation with concentration of [Fe(NN)₃]³⁺ is rationalized on the basis of coordination of a water molecule at the carbon atom adjacent to the ring nitrogen of the metal polypyridyl complexes by nucleophilic attack at higher concentrations. Electron‐withdrawing and electron‐releasing substituents in PSAA facilitate the reaction and Hammett correlation gives an upward ‘V’ shaped curve. The apparent upward curvature is rationalized based on the change in the rate determining step from electron transfer to nucleophilic attack, by changing the substituents from electron‐releasing to electron‐withdrawing groups. Electron‐releasing substituents in PSAA accelerate the electron transfer from PSAA to the complex and also stabilize the intermediate through resonance interaction leading to negative reaction constants (ρ). Conversely, electron‐withdrawing groups, while retarding the electron transfer exert an accelerating effect on the nucleophilic attack of H₂O which leading to low magnitude of ρ⁺ compared to high ρ^? values of electron‐releasing groups. Marcus theory is applied, and a fair agreement is seen with the experimental values. Copyright © 2016 John Wiley & Sons, Ltd.     

Hydrolytic reactions of cyclic bis(3′‐5′)diadenylic acid (c‐di‐AMP)

Hydrolytic reactions of cyclic bis(3′‐5′)diadenylic acid (c‐di‐AMP) have been followed by Reversed phase high performance liquid chromatography (RP‐HPLC) over a wide pH range at 90 °C. Under neutral and basic conditions (pH ≥ 7), disappearance of the starting material (first‐order in [OH^?]) was accompanied by formation of a mixture of adenosine 2′‐monophosphate and 3′‐monophosphate (2′‐AMP and 3′‐AMP). Under very acidic conditions (from H₀ = ?0.7 to 0.2), c‐di‐AMP undergoes two parallel reactions (first‐order in [H⁺]): the starting material is cleaved to 2′‐AMP and 3′‐AMP and depurinated to adenine (i.e., cleavage of the N‐glycosidic bond), the former reaction being slightly faster than the latter one. At pH 1–3, isomerization to cyclic bis(2′‐5′)diadenylic acid competes with the depurination. Copyright © 2012 John Wiley & Sons, Ltd.     

Dramatic solvent and concentration dependence in the reaction of (anthracen‐9‐yl)methanamines with suitable electron‐deficient acetylenes

Herein, we describe diverse reactivity of (anthracen‐9‐yl)methanamines with a few electron‐deficient acetylenes. Depending on the solvent and concentration, (anthracen‐9‐yl)methanamines reacted with acetylenes through one electron transfer, two electron transfer, or Diels–Alder pathways; and under certain conditions, we observed multiple reaction pathways. We have proposed plausible mechanisms to account for various reactions observed by us. Copyright © 2014 John Wiley & Sons, Ltd.     

Reactivity of 2‐aryl‐1,3‐dithiane anions towards neopentyl,neophyl and phenyl iodides. New evidence for an SRN1 mechanism

The reactions of 2‐(4‐Z‐phenyl)‐1,3‐dithiane anions (Z = H, OMe, Cl, CN) with neopentyl, neophyl and phenyl iodides were studied in DMSO, taking into consideration the effect of the Z substituent on the dithiane anions reactivity as well as on the product distribution. These substitution reactions proceed by an S_RN1 mechanism with radicals and radical anions as intermediates. Two competitive pathways are possible for the radical anion of the substitution product, namely electron transfer (ET) to the substrate giving the substitution product and C–S bond fragmentation to yield a distonic radical anion. ET is the main pathway for the reactions between dithiane anions bearing electron‐donor substituents and neopentyl or its analogue iodides affording the substitution products in moderate yields (41–53%). Copyright © 2011 John Wiley & Sons, Ltd.     

A spectroscopic study of the adsorption and reactions of methanol,formaldehyde and methyl formate on clean and oxygenated Cu(110) surfaces

The adsorption and reaction of methanoi (CH₃OH), methyl formate (CH₃OCHO) and formaldehyde (H₂CO) on clean and oxygen-covered Cu(110) surfaces has been studied with EELS, UPS and thermal desorption spectroscopy (TDS). The clean surface is relatively unreactive but adsorbed oxygen readily attacks the hydroxyl proton and formyl carbon atoms to generate the intermediate methoxy (CH₃O) and formate (HCOO). Methyl formate is split into two intermediates, methoxy and formate. By correlating the three techniques we analyse (a) the condensed multilayer at 90 K; (b) the weakly bound molecular monolayer states prior to dissociation or reaction and (c) the reactive intermediates at higher temperatures. Formaldehyde forms the surface polymer polyoxymethylene [(CH₂O)_n] in the monolayer on Cu(110) which subsequently reacts with oxygen to generate formate. No molecular formaldehyde was observed above 120 K. Correlation of the EELS and UPS results for polyoxymethylene shows that an earlier interpretation by Rubloff et al. [Phys. Rev. B14 (1976) 1450] of anomalous shifts in the formaldehyde UPS spectrum on surfaces is incorrect, and due simply to the new polymeric structure of surface formaldehyde. Methyl formate coordinates to copper via the carbonyl lone pair orbital and methanol via the oxygen lone pair orbital. No evidence was found for methyl formate synthesis by dimerization of formaldehyde (the Tischenko reaction) or dehydrogenation of methanol on the clean Cu(110) surface. These latter reactions are facile over copper catalysts at atmospheric pressure. The success of the oxidation experiments and the failure of the synthesis reactions in UHV is a consequence of the pressure dependence of the equilibrium constants for the different reactions. As found previously in Fischer-Tropsch studies, condensation reaction equilibria are pressure dependent and product formation is considerably suppressed at UHV pressures.     

Quantum chemical study on gas phase decomposition of ferulic acid

Ferulic acid, representing phenolic fraction of bio-oil, is considered to be a model compound in this study for its decomposition into various end products such as ethylbenzene, eugenol, cis-isoeugenol, vanillin, 4-ethylguaiacol, guaiacol, and acetovanillone using density functional theory approach. Results of bond dissociation energies indicate that cleavage of methyl group from ferulic acid is the lowest energy-demanding bond scission amongst all 14 bond cleavages. Primary end product by decomposition of ferulic acid is found to be ethylbenzene and its production occurs through the formation of intermediate products such as 4-hydroxycinnamic acid, cinnamic acid and styrene. Demethoxylation of ferulic acid gives rise to the production of 4-hydroxycinnamic acid which further undergoes the formation of cinnamic acid by dehydroxylation reaction route. The formation of cinnamic acid in this study is carried out using three reaction schemes 1–3 and its further reduction to ethylbenzene is performed using two reaction possibilities. Finally, favourable pathway is found to be decarboxylation of cinnamic acid to produce vinylbenzene followed by the production of ethylbenzene using hydrogenation of C=C chain double bond. Furthermore, thermochemistry of each reaction scheme is performed at atmospheric pressure and at a wide range of temperature of 598–898 K.     

Aza‐Diels–Alder reaction between cyclopentadiene and protonated N‐phenylethyliminoacetates of 8‐phenylmenthol and 8‐phenylneomenthol: a density functional theory study

The cycloaddition between glyoxylate imines possessing two chiral auxiliaries, N‐(R)‐ or N‐(S)‐1‐phenylethyl and 8‐phenylmenthyl or 8‐phenylneomenthyl, and cyclopentadiene is described. Computational calculations using density functional theory with the Becke, three‐parameter, Lee–Yang–Parr functional and the 6‐31G(d) basis set were performed to better understand the highly diastereoselective mechanism and the exo‐selectivity observed experimentally for these ionic aza‐Diels–Alder reactions. Copyright © 2011 John Wiley & Sons, Ltd.     

Characterization of the products of aniline peroxydisulfate oligo/polymerization in media with different pH by resonance Raman spectroscopy at 413.1 and 1064 nm excitation wavelengths

The pH–structure correlation of the products of aniline peroxydisulfate reaction was mainly investigated by resonance Raman spectroscopy. The reactions of aniline and ammonium peroxydisulfate were carried out in aqueous solutions of initial pH ranging from 4.9 to 13.2 and monomer/oxidant molar ratio of 4/1. For an initial pH of 4.9, the spectroscopic techniques showed that the emeraldine salt form of polyaniline (PANI–ES) is the main product, corroborating that the usual head‐to‐tail coupling mechanism is taking place. The resonance Raman spectra at 1064 nm exciting wavelength were useful to detect the emeraldine salt as a minor product for reactions at an initial pH of 5.3–11.5. The Raman spectra of the main product of the reaction at initial pH of 13.2 excited at 1064 and 413.1 nm showed new spectral features consistent with 1,4‐Michael‐type adducts of aniline monomers and 1,4‐benzoquinone‐monoimine unit. These compounds and their products of hydrolysis/oxidation are the predominant species for the reaction media of initial pH from 5.3 to 13.2. In order to get PANI with different nanoscale morphologies, a pH value of more than 0 or 1 was used in the aniline polymerization. The spectroscopic data obtained in this work reveal that head‐to‐tail coupling does not occur when aniline reacts at media pH higher than about 5. It is suggested that chemical structures of the products of aniline oxidation by an unusual mechanism are the driving force for the development of assorted morphologies. Copyright © 2011 John Wiley & Sons, Ltd.     

Radical chemistry of glucosamine naphthalene acetic acid and naphthalene acetic acid: a pulse radiolysis study

Free radical‐induced oxidation reactions of glucosamine naphthalene acetic acid (GNaa) and naphthalene acetic acid (Naa) have been studied using pulse radiolysis. GNaa was synthesized by covalently attaching Naa on glucosamine. Hydroxyl adduct (from the reaction of hydroxyl radicals (^●OH) at the naphthalene ring) was identified as the major transient intermediate (suggesting that the ^●OH reaction is on the naphthalene ring) and is characterized by its absorption maxima of 340 and 400 nm. Both GNaa and Naa undergo similar reaction pattern. The bimolecular rate constants determined for the reactions are 4.8 × 10⁹ and 8.9 × 10⁹ dm³ mol^?1 s^?1 for GNaa and Naa respectively. The mechanism of reaction of ^●OH with GNaa was further confirmed using steady‐state method. Radical cation of GNaa was detected as an intermediate during the reaction of sulfate radical (SO₄^●?) with GNaa (k₂ = 4.52 × 10⁹ dm³ mol^?1 s^?1). This radical cation transforms to a ^●OH adduct at higher pH. The radical cation of GNaa is comparatively long lived, and a cyclic transition state by neighboring group participation accounts for its stability. The oxy radical anion (O^●?) reacts with GNaa (k₂ = 1.12 × 10⁹ dm³ mol^?1 s^?1) mainly by one‐electron transfer mechanism. The reduction potential values of Naa and GNaa were determined using cyclic voltammetric technique, and these are 1.39 V versus NHE for Naa and 1.60 V versus NHE for GNaa. Copyright © 2014 John Wiley & Sons, Ltd.     

Mass spectrometric study of the decomposition pathways of canonical amino acids and α‐lactones in the gas phase

The dissociation pathways of a gas‐phase amino acid with a canonical (non‐zwitterionic) α‐amino acid moiety are studied by using mass spectrometry. Investigation of the canonical amino acid moiety is possible because the ionized amino acid, a sulfonated phenylalanine, has a charge center that is separated from the amino acid, and dissociation occurs by charge‐remote fragmentation. The amino acid is found to dissociate only by loss of NH₃ upon collision‐induced dissociation to form a substituted α‐lactone. The dissociation is consistent with what has been observed previously upon pyrolysis of other α‐substituted carboxylic acids. Decarboxylation, which has also been reported previously for amino acid pyrolysis, is not observed, likely because the product would be a high‐energy, ammonium ylide. The resulting α‐lactone is found to undergo dissociation by decarbonylation to give an aldehyde, and by loss of CO₂. Decarboxylation is calculated to occur through a transition state involving hydride shift coupled with lactone ring‐opening. The transition state is found to be stabilized by the negative charge, and therefore, decarboxylation is more favorable for anions. The results show that remote ionic groups can be used as mostly inert charge carriers to enable mass spectrometry to be used to investigate the gas‐phase physical and chemical properties of different types of functional groups, including amino acids. Copyright © 2015 John Wiley & Sons, Ltd.