Structure-borne noise reduction for an infinite, elastic cylindrical shell

A theoretical model was developed to evaluate the reduction of structure-borne noise generated by an axially symmetric ring force which is applied on the interior of the cylindrical shell. The vibrating cylindrical shell is coated with a microvoided elastomer that is acoustically soft material designed for the reduction of the generated noise. The analytical model is a two-layer shell structure comprised of a cylindrical shell and an outer layer (coating) that is perfectly bonded to the cylindrical shell. The outer and inner surfaces of the coated shell are in contact with water and air, respectively. The analysis for this problem is based on the theory of elasticity, acoustic wave equations, and pertinent boundary conditions. Effects of various parameters such as coating thickness and material properties on the noise reductions are presented.     

Acoustic signature of a submarine hull under harmonic excitation

The structural and acoustic responses of a submarine under harmonic force excitation are presented. The submarine hull is modelled as a cylindrical shell with internal bulkheads and ring stiffeners. The cylindrical shell is closed by truncated conical shells, which in turn are closed at each end using circular plates. The entire structure is submerged in a heavy fluid medium. The structural responses of the submerged vessel are calculated by solving the cylindrical shell equations of motion using a wave approach and the conical shell equations with a power series solution. The far-field radiated sound pressure is then calculated by means of the Helmholtz integral. The contribution of the conical end closures on the radiated sound pressure for the lowest circumferential mode numbers is clearly observed. Results from the analytical model are compared with computational results from a fully coupled finite element/boundary element model.     

A prediction of the acoustic field of a vibrating box by FEM-BEM

I.Mathematicalmodelofacousticfie1dByapplyingtheSommerfeldradiationcondihonThus,anacousticfic1disdescribcdbyHelmholtzformula.Byconsideringaficldpointinthearea,Helmholtzformulaisgivenbythefollowingthreeintegra1equations:(1)Theexternalintcgra1fOrmu1a'(2)Thcintcrnalintegralformu1af(3)Thesurfaceintegralformu1afwhcreP.isthesoundpressureonthcSsurface;rthedistancefrompointqtothee1ementsurfacedSiqtheficldpoint,tuthefrcqucncyoftheacousticradiation;pthedensityofthesurroundingmedium,vsthenormalvibrati…     

Acoustic wave scattering from a composed shell reinforced by a single rib: characteristics of peripheral waves

The steady-state axisymmetrical problem of a plane acoustic wave scattering from a composed shell is considered. The shell has a cylindrical part and two hemispherical endcaps. The rib is a ring of rectangular cross-section that divides the shell into two equal parts. The motion of the shell and the rib is described by the equations of elasticity theory, and the liquid is described by the Helmholtz equation. The solution is obtained numerically by a coupled finite element/boundary element model. Two peripheral waves are generated in the shell: the membrane S0 wave and the bending type water-borne A wave. The form function, acoustic spectrogram and dispersion curves of the phase velocities are presented, and the effect of the rib on the peripheral waves is discussed.     

Coupled FEM/BEM for control of noise radiation and sound transmission using piezoelectric shunt damping

In this paper, we present a coupled finite element/boundary element method (FEM/BEM) for control of noise radiation and sound transmission of vibrating structure by passive piezoelectric techniques. The system consists of an elastic structure (with surface mounted piezoelectric patches) coupled to external/internal acoustic domains. The passive shunt damping strategy is employed for vibration attenuation in the low frequency range. The originality of the present paper lies in evaluating the classically used FEM/BEM methods for structural–acoustics problems when taking account smart systems at the fluid–structure interfaces.     

Dynamic behavior and sound transmission analysis of a fluid-structure coupled system using the direct-BEM/FEM

A direct-BEM/Fem method was proposed to analyze the vibration and acoustic radiation characteristics of a submerged structure. Model parameters of the structure and the fluid-structure interaction due to surrounding water were analyzed by using FEM and direct BEM. Vibration velocity of the outer hull surface and underwater sound pressure were computed through modal superposition technique. The direct-BEM/FEM method was first validated by analyzing a submerged cylindrical shell, then was used to analyze the vibro-acoustic behavior of a submarine stern structure. The results have demonstrated the direct-BEM/FEM method is more effective than FEM in computing the underwater sound radiation of the stern structure.     

An integral equation approach to acoustic cloaking

The paper presents an original boundary integral equation (BIE) formulation for the analysis of the acoustic cloaking of a scatterer. The advantage of such an approach is the lower computational burden, especially when the analysis of a large portion of the hosting domain is required. The partial differential equation governing the propagation inside the cloak is recast in the form of non-homogeneous wave equation, with field sources depending on the mechanical properties of the cloak. The boundary integral formulation is derived using the standard procedure. The boundary element method (BEM) is used to derive the matrix transfer function of the cloak. The latter is applied to the incident field at the cloak's outer boundary to obtain the total field at arbitrary locations in the host. The formulation is applied to the simple case of a radially symmetric cloak embedding a circular obstacle. Numerical results are presented for sound-hard and sound-soft obstacles, including a study of the cloaking efficiency as a function of the frequency.     

有限元/边界元耦合方法在海洋生物目标强度特性研究的应用*

目标强度特性是海洋生物声学识别与资源量评估的重要依据,其中,基于近似几何体和声阻抗特性的理论模型法是研究海洋生物目标强度的重要手段。由于对几何形态近似处理以及数值求解方法的限制,传统理论模型对声波频率、入射方位以及目标声阻抗、形态尺寸等均有各自不同的适用范围,单一模型难以满足不同种类或同一种类但不同尺寸海洋生物的目标强度求解。本文尝试将逐渐见诸应用的有限元/边界元耦合方法用于海洋生物目标强度特性研究,分别以球形生物、纺锤形鱼类尾明角灯鱼(Ceratoscopelus warmingii)和细长形浮游动物南极大磷虾(Euphausia superba)为例进行仿真计算,并与相适应的经典理论模型进行对比分析。结果表明,对于球形生物,有限元/边界元耦合方法与解析模型的目标强度频响曲线完全吻合;对于纺锤形鱼类,有限元/边界元耦合方法可有效弥补基于模态级数解的形变圆柱体模型在中低频和两端入射时的准确性问题;对于细长形浮游动物,有限元/边界元耦合方法与畸变波玻恩近似模型高度吻合。综上,有限元/边界元耦合方法对多种海洋生物目标强度求解均具有较好的适用性,未来有待进一步结合实验测定进行验证。     

三维浅海下弹性结构声辐射预报的有限元-抛物方程法

利用多物理场耦合有限元法对结构和流体适应性强、抛物方程声场计算高效准确的特点,提出了三维浅海波导下弹性结构声振特性研究的有限元-抛物方程法.该方法采用多物理场耦合有限元理论建立浅海下结构近场声辐射模型,计算局域波导下结构声振信息,并提取深度方向上复声压值作为抛物方程初始值;然后采用隐式差分法求解抛物方程以步进计算结构辐射声场.重点介绍了该方法对浅海下结构声辐射计算的准确性、高效性以及快速收敛性后,对Pekeris波导中有限长弹性圆柱壳的声振特性进行了分析.研究得出,当圆柱壳靠近海面(海底)时,其耦合频率比自由场下的要高(低),当潜深达到一定范围时,与自由场耦合频率基本趋于一致;在低频远场,结构辐射场与同强度点源声场具有一定的等效性,且等效距离随着频率增加而增加;由于辐射声场受结构振动模态、几何尺寸和简正波模式影响,结构辐射场传播的衰减规律按近场声影响区、球面波衰减区、介于球面波和柱面波衰减区、柱面波衰减区四个扩展区依次进行.     

Structural and acoustic responses of a fluid-loaded cylindrical hull with structural discontinuities

This paper studies the low frequency vibrational behaviour and radiated sound of a submarine hull under axial excitation. The submarine is modelled as a fluid-loaded cylindrical shell with internal bulkheads and ring-stiffeners and closed at each end by circular plates. A smeared approach is used to model the ring stiffeners. The external pressure acting on the hull due to the fluid loading is calculated using an infinite model and is shown to be a good approximation at low frequencies. The radiated sound pressure is obtained by considering the finite cylindrical hull to be extended by two semi-infinite rigid baffles. The sound pressure is then only due to the radial displacement of the cylindrical shell, without taking into account the scattering at the finite ends. The main aim of this paper is to observe the influence of the various complicating effects such as the bulkheads, ring-stiffeners and fluid loading on the structural and acoustic responses of the finite cylindrical shell. Results from the analytical models presented in this paper are compared to the computational results from finite element and boundary element models.     

The characteristics of sound radiation from a cylindrical shell coated with multiple compliant layers

The effect of multiple compliant layers on sound radiation from a finite cylindrical shell immersed in an infinite acoustic medium is studied. The transfer matrix is derived according to the continuous boundary conditions at each adjacent interface of the multi-layer system. With the shell theory and the acoustic wave equation, the theoretical model is developed to estimate the characteristics of sound radiation. The numerical calculation results show that the amount of the acoustic radiation power reduction increases as the wave speed or the density of the compliant layer decreases, and using multi-layer system could be more effective on noise reduction than the corresponding uniform single layer.     

On the sound field of a shallow spherical shell in an infinite baffle

A method is presented for calculating the far field sound radiation from a shallow spherical shell in an acoustic medium. The shell has a concentrated ring mass boundary condition at its perimeter representing a loudspeaker voice coil and is excited by a concentrated ring force exerted by the end of the voice coil. A Green's function is developed for a shallow spherical shell, which is based upon Reissner's solution to the shell wave equation [Q. Appl. Math. 13, 279-290 (1955)]. The shell is then coupled to the surrounding acoustic medium using an eigenfunction expansion, with unknown coefficients, for its deflection. The resulting surface pressure distribution is solved using the King integral together with the free space Green's function in cylindrical coordinates. In order to eliminate the need for numerical integration, the radiation (coupling) integrals are solved analytically to yield fast converging expansions. Hence, a set of simultaneous equations is obtained which is solved for the coefficients of the eigenfunction expansion. These coefficients are finally used in formulas for the far field sound radiation.     

Application of the finite element method to Monte Carlo simulations of scattering of waves by random rough surfaces: penetrable case

The finite element method (FEM) of Monte Carlo simulations of random rough surface scattering is extended to penetrable rough surface scattering. The attraction of the method is the banded nature of the resulting matrix equation. The method yields a system of linear algebraic equations which is solved by a direct sparse symmetric matrix inversion. Convergence and accuracy of the method is demonstrated and established by varying various input parameters such as the number of evanescent waves, the number of sampling points and the surface lengths. Results with incident plane wave TE polarization are presented for both the mean reflected scattered intensity and the mean transmitted scattered intensity as a function of surface parameters such as RMS surface heights and correlation lengths. The numerical results are compared against the tapered wave integral equation (TWIE) method. The results of a tapered wave solution of the integral equation averaging over many realizations are in good numerical agreement with FEM if large surface lengths are used in the integral equation method. It is found that a large surface length is required in the TWIE method to have a narrow incident angular spectlum to accurateiy predict the transmitted scattered intensity, whereas a relatively small surface length is sufficient in the FEM. The total CPU time and memory storage requirements for the FEM are much less than that of the TWIE method for eases when the number of horizontal sampling points is much larger than the number of vertical sampling points in the region of discretization. The percentage error in conservation of energy for the FEM is shown to be less than 0.4% for all the examples presented. The total CPU time, memory storage requirements and the percentage error comparisons between the FEM and the TWIE are presented.     

Application of the finite element method to Monte Carlo simulations of scattering of waves by random rough surfaces: penetrable case

Abstract

The finite element method (FEM) of Monte Carlo simulations of random rough surface scattering is extended to penetrable rough surface scattering. The attraction of the method is the banded nature of the resulting matrix equation. The method yields a system of linear algebraic equations which is solved by a direct sparse symmetric matrix inversion. Convergence and accuracy of the method is demonstrated and established by varying various input parameters such as the number of evanescent waves, the number of sampling points and the surface lengths. Results with incident plane wave TE polarization are presented for both the mean reflected scattered intensity and the mean transmitted scattered intensity as a function of surface parameters such as RMS surface heights and correlation lengths. The numerical results are compared against the tapered wave integral equation (TWIE) method. The results of a tapered wave solution of the integral equation averaging over many realizations are in good numerical agreement with FEM if large surface lengths are used in the integral equation method. It is found that a large surface length is required in the TWIE method to have a narrow incident angular spectlum to accurateiy predict the transmitted scattered intensity, whereas a relatively small surface length is sufficient in the FEM. The total CPU time and memory storage requirements for the FEM are much less than that of the TWIE method for eases when the number of horizontal sampling points is much larger than the number of vertical sampling points in the region of discretization. The percentage error in conservation of energy for the FEM is shown to be less than 0.4% for all the examples presented. The total CPU time, memory storage requirements and the percentage error comparisons between the FEM and the TWIE are presented.     

A finite element approach for predicting nozzle admittances

A finite element method is used to predict the admittances of axisymmetric nozzles. It is assumed that the flow in the nozzle is isentropic and irrotational, and the disturbances are small so that linear analyses apply. An approximate, two dimensional compressible model is used to describe the steady flow in the nozzle. The propagation of acoustic disturbances is governed by the complete linear wave equation. The differential form of the acoustic equation is transformed to an integral equation by using Galerkin's method, and Green's theorem is applied so that the acoustic boundary conditions can be introduced through the boundary residuals. The boundary conditions are described for both straight and curved sonic lines. A two dimensional FEM with linear elements is used to solve the acoustic equation. A one dimensional FEM is also used to solve the reduced equation of Crocco, and the solution verifies the sufficiency of the boundary residual formulation. Comparison between computed admittances and experimental data is shown to be quite good.     

径向声子晶体隔声特性*

该文构造了由两种匀质材料交替分布的径向声子晶体柱壳模型。首先,针对声波在其中的轴对称传播情况进行了理论分析,建立了声波由内向外传播的传递矩阵,进而导出了声压透射系数和隔声量表达式。采用数值分析的方法系统地讨论了径向声子晶体柱壳的隔声特性,并与单一材质柱壳的传播规律进行对比分析,其次,借助有限元仿真分析的手段对数值结果进行了验证。最后,详细分析了内外流体的特性阻抗对径向声子晶体柱壳隔声特性的影响,得到了相应的参数影响规律。研究表明,径向声子晶体柱壳存在声波带隙,导致其在带隙范围内的隔声效果远远优于单材质柱壳,并且该结构的固有特性突破了质量定律的限制;声波带隙内表面局域态现象出现与否由内外声场和结构场共同决定。     

Acoustic radiation of cylindrical elastic shells subjected to a point source: investigation in terms of helical acoustic rays.

The paper deals with the acoustic radiation of a cylindrical elastic shell with no internal loading surrounded by a fluid medium when its external surface is subjected to a point source. The problem is addressed via the use of the spatial Fourier transform. An expression is obtained for the radiated pressure that is evaluated for the far field using both the stationary phase method and the fast Fourier transform (FFT). The acoustic field calculated from the FFT is much more complicated than that obtained by using only the stationary phase method. In agreement with the geometrical theory of diffraction (GTD), alternative interpretations of the radiated field in terms of helical acoustic rays allows one to understand the reason for this result. The outstanding phenomenon underlined by the use of the FFT is the emergence of an infinite number of spatial dispersion curves associated with each leaky wave propagating in shells when excited by a point source.     

Multilevel fast multipole algorithm for acoustic wave scattering by truncated ground with trenches

The multilevel fast multipole algorithm (MLFMA) is extended to solve for acoustic wave scattering by very large objects with three-dimensional arbitrary shapes. Although the fast multipole method as the prototype of MLFMA was introduced to acoustics early, it has not been used to study acoustic problems with millions of unknowns. In this work, the MLFMA is applied to analyze the acoustic behavior for very large truncated ground with many trenches in order to investigate the approach for mitigating gun blast noise at proving grounds. The implementation of the MLFMA is based on the Nystrom method to create matrix equations for the acoustic boundary integral equation. As the Nystrom method has a simpler mechanism in the generation of far-interaction terms, which MLFMA acts on, the resulting scheme is more efficient than those based on the method of moments and the boundary element method (BEM). For near-interaction terms, the singular or near-singular integrals are evaluated using a robust technique, which differs from that in BEM. Due to the enhanced efficiency, the MLFMA can rapidly solve acoustic wave scattering problems with more than two million unknowns on workstations without involving parallel algorithms. Numerical examples are used to demonstrate the performance of the MLFMA with report of consumed CPU time and memory usage.     

TRANSIENT ANALYSIS OF RING-STIFFENED COMPOSITE CYLINDRICAL SHELLS WITH BOTH EDGES CLAMPED

A theoretical method is developed to investigate the effects of ring stiffeners on vibration characteristics and transient responses for the ring-stiffened composite cylindrical shells subjected to the step pulse loading. Love's thin shell theory combined with the discrete stiffener theory to consider the ring stiffening effect is adopted to formulate the theoretical model. The ring stiffeners are laminated with a composite material and have a uniform rectangular cross-section. The Rayleigh-Ritz procedure is applied to obtain the frequency equation. The modal analysis technique is used to develop the analytical solutions of the transient response. The analysis is based on an expansion of the loads, displacements in the double Fourier series that satisfy the boundary conditions. The effect of stiffener's eccentricity, number, size, and position on transient response of the shells is examined. The theoretical results are verified by comparison with FEM results.     

Acoustic radiation from the submerged circular cylindrical shell treated with active constrained layer damping

Based on the transfer matrix method of exploring the circular cylindrical shell treated with active constrained layer damping(i.e., ACLD), combined with the analytical solution of the Helmholtz equation for a point source, a multi-point multipole virtual source simulation method is for the first time proposed for solving the acoustic radiation problem of a submerged ACLD shell. This approach, wherein some virtual point sources are assumed to be evenly distributed on the axial line of the cylindrical shell, and the sound pressure could be written in the form of the sum of the wave functions series with the undetermined coefficients, is demonstrated to be accurate to achieve the radiation acoustic pressure of the pulsating and oscillating spheres respectively. Meanwhile, this approach is proved to be accurate to obtain the radiation acoustic pressure for a stiffened cylindrical shell. Then, the chosen number of the virtual distributed point sources and truncated number of the wave functions series are discussed to achieve the approximate radiation acoustic pressure of an ACLD cylindrical shell. Applying this method, different radiation acoustic pressures of a submerged ACLD cylindrical shell with different boundary conditions, different thickness values of viscoelastic and piezoelectric layer, different feedback gains for the piezoelectric layer and coverage of ACLD are discussed in detail. Results show that a thicker thickness and larger velocity gain for the piezoelectric layer and larger coverage of the ACLD layer can obtain a better damping effect for the whole structure in general. Whereas, laying a thicker viscoelastic layer is not always a better treatment to achieve a better acoustic characteristic.