Hydrogenolysis of methylcyclopentane over the bimetallic Ir-Au/γ-Al2O3 catalysts

The gas-phase hydrogenolysis of methylcyclopentane (MCP) was investigated over the bimetallic Ir-Au/γ-Al₂O₃ catalysts. The bimetallic systems containing the atomic Au/Ir ratios in the range of 0.125-8 and a fixed total metal content of 8 wt.%, were prepared by the sequential impregnation (SI) and co-impregnation (CI) methods. The corresponding monometallic Ir/γ-Al₂O₃ and Au/γ-Al₂O₃ catalysts were also prepared. The materials were characterized by ICP, XRD, N₂ adsorption, TEM, and H₂ chemisorption. Highly dispersed Ir nanoparticles were obtained in all cases, while the size of Au nanoparticles increased (up to 50 nm) upon the increasing Au content in the catalyst. The monometallic gold catalyst did not adsorb H₂. The incorporation of Au increased the amount of irreversible adsorbed H₂ in the Ir-Au/γ-Al₂O₃ catalysts with respect to the monometallic ones. The products obtained in the MCP hydrogenolysis were 2-methylpentane (2-MP), 3-methylpentane (3-MP) and n-hexane (n-H). The initial rate (molecules of MCP reacted s⁻¹ g_Ir⁻¹) increased with the Au content. The deactivation was lower for bimetallic catalysts, particularly for the CI ones. The addition of Au played a significant effect on chemisorption and catalytic properties of Ir.     

Elaboration and characterization of bimetallic nanoparticles obtained by laser ablation of Ni75Pd25 and Au75Ag25 targets in water

A YAG laser operating at the second harmonic wavelength (532 nm, 10 Hz, 8 ns and 40 mJ) was used to elaborate bimetallic nanoparticles by laser ablation of Ni₇₅Pd₂₅ and Au₇₅Ag₂₅ targets in water. TEM–EDX, UV–Vis spectroscopy and PIXE measurements were performed to obtain information on their mean sizes, size distributions and chemical composition as a function of the time of laser ablation. The surface of the laser impacted regions of the targets were characterized by RBS in order to check their composition after the laser ablation. The so-obtained bimetallic nanoparticles always show a homogeneous composition. However, while the composition of Au–Ag nanoparticles was found to be very similar to the one of the alloy target, the composition of the Ni–Pd nanoparticles can be different from the nominal composition of the alloy target. Segregation phenomena can be invoked to explain the difference between the Ni–Pd nanoparticles and the Au–Ag nanoparticles compositions obtained in the same conditions. However, an influence of chemical reactions occurring in the high pressure plasma created locally at liquid–solid interface (called ‘reactive quenching’) cannot be completely ruled out.     

Magnetic properties of bimetallic Au/Co nanoparticles prepared by thermal laser treatment

The irradiation of metallic films by a nanosecond pulsed laser leads to a self-assembly of nanoparticle arrays. This method has been used to prepare bimetallic Au/Co nanoparticles on a SiO₂ substrate. The microstructure and morphology of the bimetallic nanoparticles have been investigated using scanning electron microscopy and transmission electron microscopy. It has been shown that the bimetallic nanoparticles have a hemispherical shape with a single-crystal structure and an average size of ~50 nm. The magnetic properties of these nanoparticles have been examined using a vibrating-sample magnetometer in the transverse and longitudinal directions. It has been found that the direction of the magnetization of the bimetallic nanoparticles lies in the plane of the substrate, and the coercive forces in the transverse and longitudinal directions differ by 25%. The use of the vibrating-sample magnetometer method makes it possible to investigate the differences in the magnetic saturations and the coercive forces of an array of bimetallic nanoparticles on a large surface area. The performed investigations have demonstrated that the anisotropic nanomagnetic materials with the desired magnetic orientation can be easily and quickly prepared by means of thermal laser treatment.     

Simulation of the interaction of bipartite bimetallic clusters with low-energy argon clusters

Molecular-dynamics simulation of the evolution of bipartite bimetallic clusters consisting of 390 atoms during bombardment by Ar_n (n = 1, 2, 13) clusters with initial energies from 1 eV to 1.4 keV is performed. Binary Cu–Au and Ni–Al clusters consisting of equal atomic fractions of corresponding elements were used as a target. As a result of simulation, the temperatures, changes in the potential energy, sputtering yields, and intensities of collision-stimulated displacement of atoms through the interface of monometallic parts of binary clusters, depending on the size and energy of incident particle, are obtained.

     

Oxidation of Au nanoparticles on HOPG using atomic oxygen

Various Au nanostructures prepared on highly ordered pyrolytic graphite (HOPG) were oxidized using atomic oxygen under ultrahigh-vacuum conditions, and the oxygen species formed in the Au nanostructures were characterized using X-ray photoelectron spectroscopy (XPS). For an Au thin film, only a single oxygen species could be identified in the O 1s spectrum, which can be attributed to Au-oxide. For Au nanoparticles smaller than ∼10 nm, in contrast, two different oxygen species were detected, which are suggested to be Au-oxide and subsurface oxygen (or dissolved oxygen), respectively. CO titration experiments confirm the formation of different oxygen species depending on the particle size.     

Synthesis and Reactivity of Magnetically Diverse Au@Ni Core–Shell Nanostructures

Core–shell bimetallic Au@Ni nanoparticles, with gold cores and thin nickel shells with overall size less than 10 nm, are synthesized and stabilized in pure cubic (fcc) and hexagonal (hcp) phase. Due to their unique crystal, electronic, and geometric structure, they show interesting magnetic and chemical properties. The Au@Ni_fcc is magnetic, whereas Au@Ni_hcp is non‐magnetic. Both the bimetallic nanostructures are stable to surface oxidation until 150 °C and show excellent catalytic activity for p‐nitrophenol reduction reaction.     

Self-organization of bimetallic PdAu nanoparticles on SiO<Subscript>2</Subscript> surface

Bimetallic PdAu nanoparticles on SiO₂ substrate were produced by a sequential room-temperature sputtering deposition method. By the atomic force microscopy technique we studied the nanoparticles self-organization mechanisms in various conditions. First, Pd nucleation and growth proceeds at the substrate defects and the Pd nanoparticles density increase rapidly. During the second sputtering deposition, Au atoms adsorb on the SiO₂ and diffuse toward Pd nanoparticles without forming new nuclei. The Au atoms are trapped by the preformed Pd nanoparticles, forming PdAu bimetallic nanoparticles which size increases. Furthermore, fixing the amount of deposited Pd and increasing the amount of deposited Au, we analyzed the evolution of the PdAu film surface morphology: we observe that the PdAu grows initially as three-dimensional islands; then the PdAu film morphology evolves from compact three-dimensional islands to partially coalesced worm-like structures, followed by a percolation morphology and finally to a continuous and rough film. The application of the interrupted coalescence model allowed us to evaluate the critical mean island diameter R _c ≈ 2.8 nm for the partial coalescence process. The application of the dynamic scaling theory of growing interfaces allowed us to evaluate the dynamic growth exponent β = 0.21 ± 0.01 from the evolution of the film surface roughness. Finally, fixing the amount of deposited Pd and Au we studied the self-organization mechanism of the PdAu nanoparticles induced by thermal processes performed in the 973–1173 K temperature range. The observed kinetic growth mechanism is consistent with a surface diffusion-limited ripening of the nanoparticles with a temperature-dependent growth exponent. The dependence of the growth exponent on the temperature is supposed to be linked to the variation with the temperature of the characteristics of the PdAu alloy. The activation energy for the surface diffusion process was evaluated in 0.54 ± 0.03 eV.     

Synergetic Photocatalytic Nanostructures Based on Au/TiO2/Reduced Graphene Oxide for Efficient Degradation of Organic Pollutants

Recently, there is crucial interest in the design and fabrication of nanocatalysts for efficient decomposition of organic pollutants in wastewater using visible light. This work reports the assembling fabrication of synergetic photocatalytic Au/TiO₂/RGO nanostructures by utilizing the reduced graphene oxide (RGO) as substrate material and efficient separator for electrons and holes. The Au/TiO₂ nanostructures with a ≈7 nm TiO₂ particles size are dispersed uniformly on RGO nanosheets. UV–vis diffuse reflectance spectroscopy verifies that Au/TiO₂/RGO nanocomposites show strong absorption of visible light. The degradation efficiency after 1 h for hydroquinone under visible light and UV light is ≈77% and ≈90%, respectively. Under visible light, the calculated apparent rates (k ) of the Au/TiO₂/RGO nanocomposites are 0.0112 and 0.0174 min^?1 for decomposition of methylene blue and hydroquinone. That are five times greater than that of bare TiO₂. The high photocatalytic activity is mainly attributed to the synergy between RGO and Au/TiO₂ nanostructure. The strategy of composite nanostructures assembling on RGO is ensured to have a great practicable potential for the designing of high efficient multielement composite nanoparticles catalysts.     

Facile preparation of Au/Ag bimetallic hollow nanospheres and its application in surface-enhanced Raman scattering

In this paper, an Au/Ag bimetallic hollow nanostructure was obtained by using SiO₂ nanospheres as sacrificial templates. The nanostructure was fabricated via a three steps method. SiO₂@Au nanospheres were first synthesized by the layer-by-layer technique, and then they were coated with a layer of Ag particles, finally, the Au/Ag bimetallic hollow nanospheres were obtained by dissolution of the SiO₂ core by exposure in HF solution. Several characterizations, such as transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and UV visible absorption spectroscopy were used to investigate the prepared nanostructures. The effectiveness of these Au/Ag bimetallic hollow nanospheres as substrates toward surface-enhanced Raman scattering (SERS) detection was evaluated by using rhodamine 6G (R6G) as a probe molecule. We show that such Au/Ag bimetallic hollow nanospheres structure films which consisting of larger interconnected aggregates are highly desirable as SERS substrates in terms of high Raman intensity enhancement. The Au/Ag bimetallic hollow nanostructured aggregate, interconnected nanostructured aggregate and nanoscale roughness are important factors responsible for this large SERS enhancement ability.     

X-Ray Photoelectron Spectroscopy of Stabilized Zirconia Films with Embedded Au Nanoparticles Formed under Irradiation with Gold Ions

Nanosized films of stabilized zirconia with Au nanoparticles formed by implanting Au ions are studied by X-ray photoelectron spectroscopy and transmission electron microscopy. The effect of irradiation of films with Au ions and postimplantation annealing on the distribution of chemical elements and zirconium- containing ZrO _x compounds over the depth of the films is studied. Based on the data on the dimensional shift of the Au 4 f photoelectron line, the average value of the nanoparticle size is determined.

     

Fabrication of BixPdy bimetallic materials characterized by catalytic activity at low temperature: Nitro reduction and Suzuki−Miyaura coupling reactions under green conditions

A simple method for synthesizing the Bi_xPd_y bimetallic particles is described. The structure, composition distribution and size of synthesized Bi_xPd_y bimetallic particles were characterized using a number of analytical techniques. The Bi:Pd atomic ratio (x:y) of the nanoparticles was determined to be approximately 1:3 (Bi₂₄Pd₇₆), 1:1 (Bi₅₄Pd₄₆) and 3:1 (Bi₇₄Pd₂₆). The (111) diffraction peaks within the X-ray diffraction patterns of the bimetallic nanoparticles shifted from 39.9° to 38.5° as the Bi content increased from 0% to 75%. The d-spacings calculated from the 2θ data of (111) planes were 2.33, 2.34, 2.32 and 2.26 nm for nanoparticles with a Bi:Pd atomic ratio of 3:1, 1:1, 1:3 and 0:1 respectively. The crystalline properties of the surface of the Bi_xPd_y bimetallic nanoparticles were observed in high-resolution transmission electron microscopy analysis. The d-spacings between the adjacent lattice planes were measured on the surface of Bi_xPd_y bimetallic nanoparticles by averaging 10 lattice fringes distance. A regular face-centered cubic lattice was observed throughout the prepared Bi_xPd_y bimetallic nanoparticles. The lattice d-spacing of the Bi₃Pd₁, Bi₁Pd₁ and Bi₁Pd₃, bimetallic nanoparticles was approximately 2.34, 2.33 and 2.32 Å, respectively, which can be indexed to the (111) planes. These measurements correspond to the values calculated using the Bragg equation (d = nλ/2sinθ). The catalytic activity of Bi_xPd_y bimetallic nanoparticles was determined for the nitro compound reduction and Suzuki-Miyaura coupling reactions under green conditions (in an aqueous solution). Bi₁Pd₃ nanoparticles were shown to provide the best catalytic performance during both reactions, resulting in a yield of 98% in both cases.     

First-principles studies on the Au surfactant on polar ZnO surfaces

The surfactant effect of Au in ZnO nanostructures growth is studied using first-principles slab calculations based on density functional theory. The atomic structure and electronic properties of one monolayer of Au atoms on polar ZnO surfaces are examined. It is found that (1) one monolayer (ML) of Au capping layer on the ZnO polar surfaces may modify the growing properties of ZnO nanostructures by enhancing the binding energy by 0.41 eV/atom for Zn adsorption on the polar surfaces; (2) the Au adlayer on the polar ZnO surfaces seems more active for the adsorption of Zn atoms, which may be at the very heart of the effect that Au acts as catalyst for the growth of the ZnO nanostructures; and (3) total energy calculations show that the gold on-top geometry is energetically favorable than the gold diffused geometry, which may be useful to understand the phenomenon that Au particles are only found at the end of ZnO nanostructures during the growth process.     

A facile strategy to synthesize bimetallic Au/Ag nanocomposite film by layer-by-layer assembly technique

A facile strategy has been developed for the preparation of bimetallic gold–silver (Au–Ag) nanocomposite films by alternating absorption of poly-(ethyleneimine)–silver ions and Au onto substrates and subsequent reduction of the silver ions. The composition, micro-structure and properties of the {PEI–Ag/Au}_n nanocomposite films were characterized by ultraviolet visible spectroscopy (UV–vis), transmisson electron microscopy (TEM), field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), surface enhanced Raman scattering (SERS) and cyclic voltammetry (CV). The UV–vis characteristic absorbances of {PEI–Ag/Au}_n nanocomposite thin film increase almost linear with the number of bilayers, which indicates a process of uniform assembling. Appearance of a double plasmon bands in the visible region and the lack of apparent core–shell structures in the TEM images confirm the formation of bimetallic Au–Ag nanoparticles. The result of XPS also demonstrates the existence of Ag and Au nanoparticles in the nanocomposite films. TEM and FESEM images show that these Ag and Au nanoparticles in the films possess sphere structure with the size of 20–25 nm. The resulting {PEI–Ag/Au}_n films inherit the properties from both the metal Ag and Au, which exhibits a unique performance in SERS and electrocatalytic activities to the oxidation of dopamine. As a result, the {PEI–Ag/Au}_n films are more attractive compared to {PEI–Ag/PSS}_n and {PEI/Au}_n films.     

Interactions of oxygen and CO with AgAu bimetallic nanoparticles on sputtered highly ordered pyrolytic graphite (HOPG) surfaces

Oxidation of AgAu bimetallic nanoparticles on sputtered HOPG by atomic oxygen and reduction of the oxidized surface by CO at room temperature were studied using X-ray photoelectron spectroscopy (XPS). For 2 nm-sized nanoparticles, prepared by postdeposition of Ag on Au-core, atomic oxygen exposure mostly leads to the formation of chemically inert oxygen species. This result is analogous to that of pure Ag and Au nanoparticles of similar sizes on the same substrate. In contrast, “Au on Ag-core” nanoparticles form chemically active oxygen species, suggesting that depending on detailed structures of bimetallic nanoparticles, diverse chemical properties can be obtained.     

Preparation of large-area surface-enhanced Raman scattering active Ag and Ag/Au nanocomposite films

Ag films on tinning glass substrates were fabricated by modified silver-mirror (Tollen’s) reaction with the advantage of low-cost, simple and quick fabrication process. The obtained Ag films were served as sacrificial materials for preparation of Ag/Au nanocomposite films by immersing in a chlorauric acid (HAuCl₄) solution at room temperature. After a short time of galvanic replacement reaction, Ag/Au bimetallic nanostructures were synthesized with “concave” structures. The morphology, properties and composition of the Ag and Ag/Au nanocomposite films were analyzed by using scanning electron microscopy (SEM), UV-visible spectroscopy, X-ray diffraction (XRD), energy-dispersive X-ray spectrometry (EDS) and surface enhanced Raman scattering (SERS). SEM images displayed that the large area of Ag film and Ag/Au bimetallic nanostructures experienced structural evolution process during galvanic reaction. The UV-Vis spectra showed the absorbencies characterization of Ag film and Ag/Au nanocomposite films. SERS measurements using methylene blue as an analyte showed that SERS intensities of bimetallic films were enhanced significantly compared with that of pure Ag films. The SERS enhancement ability of Ag/Au bimetallic films was dependent on the immersion time for galvanic replacement reaction.     

Gyroscopic behavior exhibited by the optical Kerr effect in bimetallic Au–Pt nanoparticles suspended in ethanol

The modification in the third-order nonlinear optical response exhibited by rotating bimetallic Au–Pt nanoparticles in an ethanol solution was analyzed. The samples were prepared by a sol–gel processing route. The anisotropy associated to the elemental composition of the nanoparticles was confirmed by high-resolution transmission electron microscopy and energy-dispersive X-ray spectroscopy measurements. The size of the nanoparticles varies in the range from 9 to 13 nm, with an average size of 11 nm. Changes in the spatial orientation of the nanomaterials automatically generated a variation in their plasmonic response evaluated by UV–Vis spectroscopy. A two-wave mixing experiment was conducted to explore an induced birefringence at 532 nm wavelength with nanosecond pulses interacting with the samples. A strong optical Kerr effect was identified to be the main responsible effect for the third-order nonlinear optical phenomenon exhibited by the nanoparticles. It was estimated that the rotation of inhomogeneous nanostructures can provide a remarkable change in the participation of different surface plasmon resonances, if they correspond to multimetallic nanoparticles. Potential applications for developing low-dimensional gyroscopic systems can be contemplated.     

Effect of nanoparticle metal composition: mono- and bimetallic gold/copper dendrimer stabilized nanoparticles as solvent-free styrene oxidation catalysts

A range of mono- and bimetallic Au_mCu_n nanoparticles (NPs), with varying metal compositions, was prepared by using a third-generation diaminobutane poly(propylene imine) (G3 DAB-PPI) dendrimer, modified with alkyl chains, as a stabilizer. It was found that the length of the peripheral alkyl chain, (M1 (C₁₅), M2 (C₁₁), and M3 (C₅)), had a direct influence on the average nanoparticle size obtained, confirming the importance of the nanoparticle stabilizer during synthesis. The Au NPs showed the highest degree of agglomeration and polydispersity, whereas the Cu NPs were the smallest and most monodisperse of the NPs. The bimetallic NPs sizes were found to vary between those of the monometallic NPs, depending on the metal composition. Interestingly, the bimetallic NPs were found to be the most stable, showing very little variation in size over time, even up to 9 months. The DSNs were evaluated in the catalytic oxidation of styrene, using either H₂O₂ or TBHP as oxidant. Here, we show that the bimetallic DSNs are indeed the superior catalysts when compared to their monometallic analogues, under the same reaction conditions, since a good compromise between stability and activity can be achieved where the Au provides catalytic activity and the Cu serves as a stabilizer. These Au_mCu_n bimetallic DSNs present a less expensive and more stable catalyst with negligible loss of activity, opening the door to green catalysis.

Open image in new window

Graphical abstract

     

The effect of preadsorbed K on the size distribution of Au nanoparticles on TiO2(1 1 0) surface

The effect of K on the morphology of Au nanoparticles deposited on TiO₂(1 1 0) surface is investigated by STM-STS and AES methods. For comparison, the enhanced concentration of oxygen defect sites generated by Ar⁺ bombardment was also studied. It was found that both the K additive and the oxygen defect sites induce a pronounced decrease in the average size of the Au nanoparticles evolved at 320 K. On the clean TiO₂(1 1 0) the average size of Au particles is 4.3 nm at approximately monolayer coverage of gold, while in the presence of K or oxygen vacancies this value decreased to 2.5 nm. In spite of the reduced average diameter detected at room temperature, the mean size of the Au nanoparticles increased significantly from 2.5 nm up to 7 nm on the effect of annealing at 500-700 K for K precoverages of 0.3-1 ML. For the clean and the Ar⁺ pretreated TiO₂(1 1 0) surfaces the mean size of the Au particles changed only slightly on the effect of the same thermal treatments.     

An insight into the effect of composition for enhance catalytic performance of biogenic Au/Ag bimetallic nanoparticles

A comprehensive knowledge of composition‐activity property relationship of nanoparticulate materials is highly desirable for applications in various catalysis reactions. We have addressed a facile green aqueous approach for preparation of Au, Ag monometallic, Au/Ag alloy as well as core‐shell bimetallic nanoparticles. The phytochemicals present in lemon grass leaves extract were employed both as natural reducing and capping agents at room temperature. X‐ray diffraction pattern, UV‐Vis spectroscopy, and energy dispersive X‐ray studies confirmed the formation of bimetallic system. The ensuing Au core/Ag shell and Au/Ag alloy bimetallic nanoparticles were crystalline and spherical in nature with identical average diameter of ~ 18 nm as measured via transmission electron microscopy. The bimetallic systems incredibly display higher catalytic potential than their monometallic counterparts which were vividly reckoned on structural effect, lattice compression, and synergistic electronic effect.     

Engineering Multifunctional Gold Decorated Dendritic Mesoporous Silica/Tantalum Oxide Nanoparticles for Intraperitoneal Tumor‐Specific Delivery

Nonspecific high‐energy radiation for treatment of metastatic ovarian cancer is limited by damage to healthy organs, which can be mitigated by the use of radiosensitizers and image‐guided radiotherapy. Gold (Au) and tantalum oxide (TaO_x) nanoparticles (NPs), by virtue of their high atomic numbers, find utility in the design of bimetallic NP systems capable of high‐contrast computed tomography (CT) imaging as well as a potential radiosensitizing effect. These two radio‐dense metals are integrated into dendritic mesoporous silica NPs (dMSNs) with radial porous channels for high surface‐area loading of therapeutic agents. This approach results in stable, monodispersed dMSNs with a uniform distribution of Au on the surface and TaO_x in the core that exhibits CT attenuation up to seven times greater than iodine or monometallic dMSNs without either TaO_x or Au. Tumor targeting is assessed in a metastatic ovarian cancer mouse model. Ex vivo micro‐CT imaging of collected tumors shows that these NPs not only accumulate at tumor sites but also penetrate inside tumor tissues. This study demonstrates that after intraperitoneal administration, rationally designed bimetallic NPs can simultaneously serve as targeted contrast agents for imaging tumors and to enhance radiation therapy in metastatic ovarian cancer.