生物质催化转化制取芳香化合物

利用分子筛催化剂(NaZSM-5、HZSM-5、ReY和HY)研究了木屑上催化裂解制取芳香物(苯、甲苯、二甲苯)的反应过程,发现HZSM-5催化剂具有最高的生物质裂解制备芳香化合物的活性. 在450 oC、 载气流速为300 mL/min和催化剂/木屑比为2的优化反应条件下,芳香化合物的产率和选择性分别达到26.5%和62.5C-mol%.     

二氧化硅改性分子筛催化生物质基多元醇制备对二甲苯

本文证明了在二氧化硅改性的分子筛催化作用下,生物质基多元醇(如山梨醇、木糖醇、赤藓糖醇、甘油和乙二醇)可以经过催化裂解、烷基化和异构化等反应,生成高附加值的化学品(对二甲苯).与HZSM-5分子筛催化剂相比,二氧化硅改性的分子筛降低了分子筛催化剂的外表面酸和孔径,从而显著的提高对甲苯的选择性和产率.本文详细讨论了催化剂、甲醇添加剂、反应温度和不同类型多元醇原料对对二甲苯选择性和产率的影响.甲醇的添加促进多元醇催化裂解中的烷基化反应,提高了二甲苯的产率.在15%SiO_2/HZSM-5催化剂作用下,对二甲苯的产率最高可达到10.9 C-mol%,对二甲苯在二甲苯中选择性达到91.1%.本文通过研究相关重要反应和催化剂特性,揭示了生物质基多元醇催化裂解制备对二甲苯的反应路径.     

二氧化硅改性分子筛催化生物质基多元醇制备对二甲苯（英文）

本文证明了在二氧化硅改性的分子筛催化作用下,生物质基多元醇(如山梨醇、木糖醇、赤藓糖醇、甘油和乙二醇)可以经过催化裂解、烷基化和异构化等反应,生成高附加值的化学品(对二甲苯).与HZSM-5分子筛催化剂相比,二氧化硅改性的分子筛降低了分子筛催化剂的外表面酸和孔径,从而显著的提高对甲苯的选择性和产率.本文详细讨论了催化剂、甲醇添加剂、反应温度和不同类型多元醇原料对对二甲苯选择性和产率的影响.甲醇的添加促进多元醇催化裂解中的烷基化反应,提高了二甲苯的产率.在15%SiO_2/HZSM-5催化剂作用下,对二甲苯的产率最高可达到10.9 C-mol%,对二甲苯在二甲苯中选择性达到91.1%.本文通过研究相关重要反应和催化剂特性,揭示了生物质基多元醇催化裂解制备对二甲苯的反应路径.     

粗生物油催化裂解制取低碳轻烯烃

利用La/HZSM-5催化剂,研究了催化裂解粗生物油及其模型化合物(包括甲醇、乙醇、乙酸、丙酮和苯酚)制取轻烯烃的过程. 获得的最大轻烯烃产率为0.19 kg/kg粗生物油. 研究表明,温度、重时空速和镧对HZSM-5分子筛的改性等因素可用来调制烯烃产率和选择性. 分子筛中添加镧,可适当的调节催化剂酸度和强弱酸位比例,从而提高烯烃选择性、产率和催化剂稳定性. 生物油制备轻烯烃的效率与原料的化学成分和氢碳有效比(H/Ce? )密切相关. 此外,比较了粗生物油催化裂解和热裂解过程,同时利用模型化合物研究了生物油转化为轻烯烃的相关反应历程和机理.     

生物油催化裂解转化制取三苯

通过不同孔特征的分子筛(HZSM-5、HY沸石和MCM-41)实现生物油催化转化为三苯(苯、甲苯和对甲苯). 基于三苯的产率和选择性,芳香化合物逐次降低顺序为: HZSM-5>MCM-41>HY沸石.用HZSM-5催化裂解生物油产生芳香化合物的最大产率为33.1%,选择性为86.4%. 研究了反应条件对生物油催化裂解的影响,结合催化剂表征结果,讨论了催化剂的结构与性能之间的关系.     

用不同类型的分子筛催化剂催化转化生物油制烯烃

研究了用一系列不同类型的分子筛催化剂催化转化制取低碳烯烃的过程,测试的催化剂包括HZSM-5、MCM-41、SAPO- 34和Y型分子筛．按照低碳烯烃的绝对收率和选择性,催化剂的活性排序为：HZSM-5>SAPO-34>MCM-41>Y型分子筛．研究表明,使用HZSM-5分子筛催化剂,获得的生物油最大低碳烯烃收率约为0.22 kg/(kg生物油),低碳烯烃的选择性约为50%,且生物油几乎实现完全转化．同时还研究了反应条件对生物油制低碳烯烃的影响．为了弄清催化剂结构与和低碳烯烃形成之间的关系,对相关催化剂进行了详细表征,对生物油热裂解和催化裂解过程进行了详细比较．     

生物质气经由二甲醚两步法制备低碳烯烃

制备出NiSAPO-34及NiSAPO-34/HZSM-5催化剂,考察了其对二甲醚催化转化制备低碳烯烃的性能．利用Cu/Zn/Al/HZSM-5和筛选出的2%NiSAPO-34/HZSM-5催化剂进行生物质气经由二甲醚两步法制备低碳烯烃的实验, 结果表明在SAPO-34上添加2%的Ni不改变其结构, 但降低了酸中心数量, 并生成了较强的酸中心． 添加少量具有稳定酸中心的HZSM-5, 该催化剂的活性提高到3 h以上, 反应进行2 h获得了最高的低碳烯烃选择性为90.8%． 当把该催化剂应用到两步催化转化过程的第二个反应器中, 其高催化活性可达5 h以上． 当以低氢碳比生物质气(H₂/CO/CO₂/N₂/CH₄=41.5/26.9/14.2/14.6/2.89)作为原料时,经两步转化,低碳烯烃的收率达到84.6 g/m³_syngas．     

水热处理对HZSM-5分子筛催化热解生物质性能的研究

本文利用比表面积测试等手段考察水热氛围对催化剂物理化学性质的影响,并通过Py-GC/MS实验研究水热处理的催化剂对生物质催化热解的效果,研究结果表明:随着水热处理温度的提高,ZSM-5分子筛的比表面积逐渐减小;水热处理对HZSM-5催化剂表面酸性中心密度和活性的优化,催化剂脱氧效果得到增强,温度越高越有利于催化剂表面酸性中心密度和活性的优化,促进热解产物的脱氧和提质,并且改善催化裂解过程中的催化剂结焦现象。     

在Ni/HZSM-5催化剂上低温水蒸汽重整生物油制氢

利用浸渍方法制备的Ni/HZSM-5催化剂在生物油低温水蒸汽重整合成中表现了较高的催化活性． 探讨了催化剂的组成、重整温度、水碳比例对重整过程的影响．在电催化重整研究中,发现催化剂上通过的电流可以显著地促进生物油水蒸汽重整．通过对不同负载量的Ni/HZSM-5催化剂和Ni₂₀/Al₂O₃催化剂的催化活性的比较,NiO在催化剂中负载量为20%(Ni₂₀/ZSM)时表现出了最高的催化活性; 即使在450 oC时, 在Ni₂₀/ZSM催化剂上也可以达到碳转化率接近完全, 氢气产率约为90%的效果． 利用XRD、ICP/AES、H₂-TPR、BET等表征手段对Ni/HZSM-5催化剂的形态和结构进行了表征.     

改性ZSM-5分子筛催化合成乙酸戊酯

以ZSM-5为原料,采用浸渍法将其交换成HZSM-5,以HZSM-5为催化剂,对以冰乙酸和正戊醇为原料合成乙酸戊酯的反应条件进行了研究。研究表明,以1.0m ol/L硫酸浸渍后的ZSM-5催化活性最高,当醇酸摩尔比为1.1∶1,催化剂用量为0.4g,反应时间为90m in,反应温度为125—135℃,酯化率可达82.5%。     

XPS, XAES, and TG/DTA characterization of deposited carbon in methane dehydroaromatization over Ga-Mo/ZSM-5 catalyst

The catalytic dehydroaromatization of methane over 3.0%Mo/HZSM-5 and 0.1%Ga-3%Mo/HZSM-5 catalysts were reported. The nature of deposited carbon was characterized by means of XPS, XAES, TG/DTG, HRTEM, and DTA techniques. In XAES study, the type of deposited carbon was characterized based on the fine structures of dN/dE spectra. The results confirm that the sp²/sp³ bonding ratio of coke species increases with on-stream time, suggesting that the deposition of heavier aromatic-type carbon is the main reason for catalyst deactivation. The addition of gallium to 3.0%Mo/HZSM-5 enhances the adsorption of CO_x species as well as the formation of alkene (such as ethylene). Therefore, the Ga-modified 3%Mo/HZSM-5 catalyst is more active and stable than the unmodified one.     

Heterogeneous adsorption and catalytic oxidation of benzene, toluene and xylene over spent and chemically regenerated platinum catalyst supported on activated carbon

The heterogeneous adsorption and catalytic oxidation of benzene, toluene and o-xylene (BTX) over the spent platinum catalyst supported on activated carbon (Pt/AC) as well as the chemically treated spent catalysts were studied to understand their catalytic and adsorption activities. Sulfuric aqueous acid solution (0.1N, H₂SO₄) was used to regenerate the spent Pt/AC catalyst. The physico-chemical properties of the catalysts in the spent and chemically treated states were analyzed by using nitrogen adsorption-desorption isotherm and elemental analysis (EDX). The gravimetric adsorption and the light-off curve analysis were employed to study the BTX adsorption and oxidation on the spent catalyst and its modified Pt/AC catalysts. The experimental results indicate that the spent Pt/AC catalyst treated with the H₂SO₄ aqueous solution has a higher toluene adsorption and conversion ability than that of the spent Pt/AC catalyst. A further studies of H₂SO₄ treated Pt/AC catalyst on their catalytic and heterogeneous adsorption behaviours for BTX revealed that the activity of the H₂SO₄ treated Pt/AC catalyst follows the sequence of benzene > toluene > o-xylene. The adsorption equilibrium isotherms of BTX on the H₂SO₄ treated Pt/AC were measured at different temperatures ranging from 120 to 180 °C. To correlate the equilibrium data and evaluate their adsorption affinity for BTX, the two sites localized Langmuir (L2m) isotherm model was employed. The heterogeneous surface feature of the H₂SO₄ treated Pt/AC was described in detail with the information obtained from the results of isosteric enthalpy of adsorption and adsorption energy distributions. Furthermore, the activity of H₂SO₄ treated Pt/AC about BTX was found to be directly related to the Henry's constant, isosteric enthalpy of adsorption and adsorption energy distribution functions.     

Mössbauer investigations of the Fe−Cu−Mn catalysts for Fischer-Tropsch synthesis

In the selective process of the syngas conversion to synthetic gasoline a bifunctional catalytic system has to be used. It was obtained by combination a Fischer-Tropsch catalyst with the HZSM-5 zeolite. The phase compositions of the precursor and the fresh catalyst were established as well as the optimum thermal treatment. The catalyst was reduced in pure H₂ or in a H₂+CO mixture. The influence of the reduction and reaction conditions on the catalyst structure was investigated.