脂溶性CdSe/ZnS量子点脂质体复合物的制备及表征

在油相中成功合成了脂溶性CdSe/ZnS核壳量子点纳米粒,粒径平均为4.5 nm,量子产率达29%,发射波长为540 nm。通过薄膜分散法,以蛋黄卵磷脂、胆固醇为膜材,将脂溶性的CdSe/ZnS核壳量子点包覆于脂质体磷脂双分子层中,由于磷脂分子的两亲性,使得脂溶性的CdSe/ZnS核壳量子点同时又具有亲水性。通过透射电镜对脂质体形态进行了表征,倒置荧光显微镜证实了发光CdSe/ZnS核壳量子点成功包埋于脂质体双分子层中,包裹的发光CdSe/ZnS核壳量子点具有更稳定的发光及抗光漂白性质。     

CdSe/ZnSe/ZnS多壳层结构量子点的制备与表征

展示了一种简捷的多壳层量子点合成路线。在含有过量Se源的CdSe体系中直接注入Zn源,"一步法"合成了CdSe/ZnSe量子点;进一步以CdSe/ZnSe为"核",表面外延生长ZnS壳层制备了核/壳/壳结构CdSe/ZnSe/ZnS量子点。相对于以往报道的多壳层结构量子点的制备方法,该方法通过减少壳层的生长步骤有效地简化了实验操作,缩短了实验周期,同时减少对原料的损耗。对量子点进行高温退火处理,能够大幅提高CdSe/ZnSe/ZnS量子点的发光量子产率。透射电镜、XRD以及光谱研究表明:所制备的量子点接近球形,核与壳层纳米晶均为闪锌矿结构,最终获得的CdSe/ZnSe/ZnS量子点的光致发光量子产率达到53％。为了实现量子点的表面生物功能化,通过巯基酸进行了表面配体交换修饰,使量子点表面具有水溶性的羧基功能团,并且能够维持较高的光致发光量子产率。     

壳层相关的CdSe核/壳量子点发光的热稳定性

测量了CdSe/ZnS(3 ML)核/壳结构及CdSe/CdS(3 ML)/ZnCdS(1 ML)/ZnS(2 ML)核/多壳层结构量子点在80~460 K范围内的光致发光光谱,研究了壳层结构对CdSe量子点发光热稳定性的影响。详细地分析了CdSe量子点的发光峰位能量、线宽和积分强度与温度之间的关系,发现CdSe量子点的发光热稳定性依赖于壳层结构。CdS/ZnCdS/ZnS多壳层结构包覆CdSe量子点在低温和高温部分的热激活能均大于ZnS壳层包覆的CdSe量子点,具有更好的发光热稳定性。此外,在300-460-300 K加热-冷却循环实验中,CdS/ZnCdS/ZnS多壳层结构包覆CdSe量子点的发光强度永久性损失更少,热抵御能力更强。     

基于紫外光辐照条件下制备ZnSe/ZnS核壳结构量子点

对传统的水相合成法进行改进,采用更加安全、简便、经济、环保的紫外光辐照方法在室温下合成了ZnSe/ZnS核壳结构量子点。调节pH值、光照时间、反应物配比等实验条件,优化了制备ZnSe/ZnS量子点核壳结构的最佳生长与修饰条件,使其具有良好色散、时间稳定性和发光特性。紫外线照射可以激发自由电子引发化学反应,研究使用了巯基乙酸(TGA)和谷胱甘肽(GSH)作为稳定剂和分散剂,用来控制ZnSe量子点的生长,得到分散均匀的ZnSe量子点。引入的光敏材料是形成ZnS的S源。利用X射线衍射(XRD)、电子显微镜(EM)、能量色散谱仪(EDX)、光致发光光谱(PL)和紫外可见光谱(UV-Vis)对量子点的晶体结构和光学性质进行了表征。结果表明, GSH修饰的ZnSe量子点相比于TGA修饰的ZnSe量子点呈现出更好的稳定性与较少的表面缺陷。ZnS的壳层生长能有效地弥补这一缺陷,但过厚的壳层会导致本征辐射的猝灭。该实验深入探索此类制备方法,并就各类影响因素和合成条件做出细致补充。实验结果结合理论分析得出ZnSe/ZnS核壳结构量子点的最佳合成条件。     

Mn掺杂ZnSe量子点变温发光性质研究

量子点(QD)照明器件中电流导致的焦耳热会使其工作温度高于室温,因此研究量子点的发光热稳定性十分重要。本文利用稳态光谱和时间分辨光谱研究了具有不同壳层厚度的Mn掺杂ZnSe(Mn: ZnSe)量子点的变温发光性质,温度范围是80～500 K。实验结果表明,厚壳层(6.5单层(MLs))Mn: ZnSe量子点的发光热稳定性要优于薄壳层(2.6 MLs)的量子点。从80 K升温到400 K的过程中,厚壳层Mn: ZnSe量子点的发光几乎没有发生热猝灭,发光量子效率在400 K高温下依然可以达到60%。通过对比Mn: ZnSe量子点的变温发光强度与荧光寿命,对Mn: ZnSe量子点发光热猝灭机制进行了讨论。最后,为了研究Mn: ZnSe量子点的发光热猝灭是否为本征猝灭,对具有不同壳层厚度的Mn: ZnSe量子点进行了加热-冷却循环(300-500-300 K)测试,发现厚壳层的Mn: ZnSe量子点的发光在循环中基本可逆。因此,Mn: ZnSe量子点可以适用于照明器件,即使器件中会出现不可避免的较强热效应。     

CuInS2纳米晶的制备和发光性质

以十二硫醇为溶剂,通过选择合适的金属源制备了各种尺寸的CuInS₂量子点。观察到随着粒子的尺寸减小,其吸收和发光光谱明显蓝移,存在明显的量子尺寸效应。通过在CuInS₂纳米晶表面包覆ZnS壳层,发现随着壳层厚度增加,其发光量子效率明显提高,最大达到了48%;继续增加壳层厚度,其发光量子效率反而降低。进一步测量它们的荧光寿命,发现包覆ZnS壳层后的CuInS₂纳米晶的荧光寿命明显增加,证实表面包覆明显减少其表面的无辐射复合中心,提高了其发光效率。进一步制备了CuInS₂/ZnS核壳量子点发光二极管,并对其电致发光性质进行了研究。     

ZnSe:Cu/CdS核壳量子点的合成及光学性能研究

以CdS为壳层材料对核水溶性ZnSe:Cu量子点进行包覆,得到ZnSe:Cu/CdS核壳结构的量子点。研究了壳层厚度对ZnSe:Cu量子点光学性能的影响,采用TEM、XRD、PL和UV-Vis手段对所得样品进行表征。实验结果表明:量子点为立方闪锌矿结构,分散性好,形状为球形,经壳层修饰后量子点的粒径由2.7 nm增大到4.0 nm。随着包覆CdS壳层数的增加,量子点的发射和紫外吸收谱红移,说明量子点在长大,证明CdS壳层生长在ZnSe:Cu量子点的表面,形成了核壳结构的ZnSe:Cu/CdS量子点。包覆CdS壳层后ZnSe:Cu量子点的发光强度减弱,但稳定性得到了提高。     

谷胱甘肽包被的CdSe/CdS量子点的直接水相制备及其对人血淋巴细胞的标记成像

首次用谷胱甘肽(GSH)作为稳定剂,在水溶液中制备了稳定地发射绿色荧光和橙色荧光的两种 CdSe/CdS核/壳结构的纳米量子点。用紫外-可见分光光度和荧光光谱方法研究了CdSe/CdS量子点的发光特性。透射电镜(TEM)结果表明CdSe/CdS量子点近似球形,在水中分散性良好,比CdSe量子点具有更优异的发光特性,发射光谱和吸收光谱都有红移现象。将CdSe/CdS量子点与鼠抗人CD3抗体连接,制备了水溶性CdSe/CdS-CD3复合物探针,对人血淋巴细胞进行标记和成像。结果表明用该探针对人血淋巴细胞成像清晰,其荧光在30 min的连续蓝光激发下无明显衰退,而FITC荧光在20 min内基本完全猝灭。     

复合荧光CdSe量子点-脂质体的制备与表征

通过脂质体方法成功地将三辛基氧化膦(TOPO)包覆的CdSe发光量子点从非极性有机溶剂转移到生物相容性的水溶液中.分别通过透射电镜(TEM)、荧光Mapping图像,以及光致发光(PL)光谱进行表征.TEM照片显示制备的CdSe核量子点为球形,具有良好的单分散特性,平均粒径约为3nm.CdSe-脂质体复合体的平均尺寸大约20nm,TEM清楚地显示了CdSe量子点被诱捕在脂质体中.荧光Mapping显示了CdSe-脂质体复合体的发光强度分布.脂质体方法转移TOPO包覆的CdSe量子点,借助了磷脂的双分子链与CdSe表面的TOPO配体之间的疏水相互作用,在CdSe的第一配体层外部形成第二配体层,保留了CdSe的存在环境,光致发光光谱表明,量子点-脂质复合体基本保持了CdSe核量子点的发射效率.     

量子点CdSe／ZnS的浓度对其荧光的影响研究

影响量子点荧光特性除了量子点尺寸因素外,其溶液浓度也会对其荧光特性起很重要的作用。但到目前,还未见到有关量子点 CdSe／ZnS 在溶液中浓度对其荧光影响的详细报道。为了掌握影响量子点CdSe／ZnS荧光特性的因素及其物理机制,利用紫外-可见吸收光谱仪和荧光光谱仪测量了尺寸为4 nm的量子点CdSe／ZnS在氯仿中不同浓度下的吸收光谱和荧光光谱,并侧重研究了量子点CdSe／ZnS的浓度对其发光特性的影响并分析了其物理机制。结果表明量子点对光谱的吸收随其浓度的增加而增大,但其发光却具有一个最佳浓度2μmol·L－1。当量子点的浓度＞2μmol·L－1时,量子点的荧光强度随着量子点浓度的增加而降低,而当量子点的浓度＜2μmol·L－1时,量子点的发光强度则随其浓度的降低而降低。其原因主要有两个：（1）荧光猝灭效应;（2）荧光发射与光吸收的竞争效应。当量子点的浓度＞2μmol·L－1时,由于量子点之间相距太近（仅为94 nm）而引起了荧光猝灭效应,且其荧光猝灭效应随量子点间距的减小而增大,且因为吸收过大,导致受激的量子点并未增加,因此,其荧光随浓度的增加而降低。而当量子点的浓度＜2μmol·L－1时,因为量子点之间的距离足够大,不再引起荧光猝灭效应,其荧光强度取决于单位体积内的量子点的个数,单位体积内量子点的个数越多,其发光强度越强。因此其发光强度随量子点溶液的浓度降低而降低。     

Shell-dependent hole transport in highly luminescent CdSe-core CdS/ZnCdS/ZnS multi-shell nanocrystals

The photoinduced hole transfer dynamics from CdSe quantum dots (QDs), shelled with ZnS or CdS/CdZnS/ZnS layers, to organic hole transporting materials (HTMs) is investigated by absorption, steady-state and time-resolved photoluminescence (PL) spectroscopy. The PL intensity and lifetime of the QDs are dramatically quenched when HTMs are added into the dilute QD solution. The quenching efficiency of the QDs significantly decreases with increasing the shell thickness and increases with decreasing the oxidation potential of the HTMs. These facts are correlated with the photoinduced hole transfer from the QDs to the HTMs. The above results are helpful in understanding the photoexcitation dynamics-related phenomena of organic molecule conjugated nano-object.     

Evolution of Luminescence with Shell's Thickness in Colloidal CdSe/CdS Core/Shell Quantum Dots

We synthesize colloidal CdSe/CdS core/shell quantum dots with different shell thicknesses, and there are five samples including CdSe core dots, and CdSe/CdS core/shell dots with 1-4 CdS layers. X-ray diffraction and Raman measurements indicate that the stress in CdSe core becomes stronger with the increasing shell thickness, and the optical measurements show that when the shell becomes thicker, the photoluminescence quantum yield is enhanced, and the radiative decay is also expedited. The temperature-dependent optical spectra are measured. The relation between the microstructure and the optical properties is discussed.     

Optical properties of 3D photonic crystals filled with CdSe/CdS quantum dots

We study 3D globular photonic crystals based on synthetic opals filled with semiconductor core/shell quantum dots CdSe/CdS by measuring the photoluminescence spectra. The spectra were obtained using 369, 384, and 408 nm LED light excitation and involving a pulse YAG laser operating at 365 and 266 nm. The study shows that the photoluminescence spectra of opal filled with CdSe/CdS changes sufficiently in comparison with spectra taken for pure opal and a reference colloidal solution of CdSe/Cds quantum dots in toluene. Such opals may be used to fabricate a narrow-band light sources.     

Effect of the Semiconductor Quantum Dot Shell Structure on Fluorescence Quenching by Acridine Ligand

The main line of research in cancer treatment is the development of methods for early diagnosis and targeted drug delivery to cancer cells. Fluorescent semiconductor core/shell nanocrystals of quantum dots (e.g., CdSe/ZnS) conjugated with an anticancer drug, e.g., an acridine derivative, allow real-time tracking and control of the process of the drug delivery to tumors. However, linking of acridine derivatives to a quantum dot can be accompanied by quantum dot fluorescence quenching caused by electron transfer from the quantum dot to the organic molecule. In this work, it has been shown that the structure of the shell of the quantum dot plays the decisive role in the process of photoinduced charge transfer from the quantum dot to the acridine ligand, which is responsible for fluorescence quenching. It has been shown that multicomponent ZnS/CdS/ZnS shells of CdSe cores of quantum dots, which have a relatively small thickness, make it possible to significantly suppress a decrease in the quantum yield of fluorescence of quantum dots as compared to both the classical ZnS thin shell and superthick shells of the same composition. Thus, core/multicomponent shell CdSe/ZnS/CdS/ZnS quantum dots can be used as optimal fluorescent probes for the development of systems for diagnosis and treatment of cancer with the use of anticancer compounds based on acridine derivatives.     

Enhancement of photoluminescence of the CdSe/CdS quantum dots on quartz substrates in the presence of silver nanoparticles

Multilayer systems consisting of layers of hybrid quantum dots are fabricated. The quantum dots with the CdSe/CdS core/shell structure are chemically synthesized and deposited on the surface of quartz glass that contains ion-synthesized silver nanoparticles in the near-surface region. Silver nanoparticles exhibit optical absorption owing to the localized surface plasmon resonance. Variations in the photoluminescence intensity of the layer related to an increase in the distance from the quartz surface with metal nanoparticles are studied. An increase in the photoluminescence intensity is observed under excitation in the spectral region of the plasmon absorption of silver nanoparticles. An optimal distance between the layers is determined to maximize the enhancement of the photoluminescence of quantum dots in the presence of the near field of metal nanoparticles.     

IR-active vibrational modes of CdTe and CdSe colloidal quantum dots and CdTe/CdSe core/shell nanoparticles and coupling effects

The frequencies of the vibrational modes of CdTe and CdSe quantum dots and CdTe/CdSe core/shell nanoparticles prepared by the colloid chemistry method are determined using IR transmission and IR reflection spectroscopy. The experimental IR transmission spectrum of CdTe and CdSe nanocrystals exhibits a broad minimum located between the frequencies of the transverse optical (TO) and longitudinal optical (LO) phonons of bulk CdTe and CdSe crystals. The frequencies of the modes for ensembles of CdTe and CdSe quantum dots are considerably shifted toward lower frequencies as compared to those calculated for single quantum dots. This is explained by the dipole-dipole interaction between quantum dots. The frequencies of modes for the structures with core/shell nanoparticles differ little from the calculated frequencies. This suggests a weakening of the interaction in these structures due to the enhancement of dielectric screening.     

巯基丙酸分子对CdSe核壳量子点和 ZnO纳米粒子薄膜之间电荷转移的影响

通过稳态光谱和时间分辨荧光光谱研究了巯基丙酸(MPA)分子对由量子点到ZnO纳米粒子薄膜的电荷转移过程的影响。研究发现,相对于CdSe纳米粒子薄膜样品,没有MPA分子参与作用的CdSe/ZnO薄膜样品和有MPA分子连接的CdSe/MPA/ZnO薄膜样品中都存在从CdSe量子点到ZnO纳米粒子薄膜的有效电荷分离过程,但是相对于CdSe/ZnO样品, CdSe/MPA/ZnO样品中电荷转移速率明显变小。这表明MPA分子本身它并不能促进CdSe到ZnO电荷分离过程,因此可以认为用金属氧化物薄膜直接吸附量子点吸收材料,将能获得高功率转换效率的量子点敏化太阳能电池。     

The effect of nonadiabaticity on the efficiency of quantum memory based on an optical cavity

Photoluminescence of CdSe colloidal nanocrystals of different topologies in an external electric field has been studied. It has been found that quenching of photoluminescence, which takes place in quantum dots, is proportional to the square of the field, and in elongated nanocrystals quenching of photoluminescence is proportional to the square root. A physical model of the mechanism of quenching based on tunneling of free charges through potential barrier nanocrystal/matrix has been proposed.     

Wurtzite and zinc-blende CdSe based core/shell semiconductor nanocrystals: Structure, morphology and photoluminescence

We report comparative study of core/shell nanocrystals based on wurtzite and novel zinc-blende CdSe core. Both wurtzite and zinc-blende CdSe are coated with CdS shell or CdS/ZnS multishell under identical synthetic parameters. Crystal structure analysis finds that CdS shell is wurtzite on either wurtzite or zinc-blende CdSe cores. Morphology and photoluminescence studies exhibit that for zinc-blende CdSe based samples, the shell growth is in fine epitaxy and the obtained core/shell nanocrystals show high quantum yield both before and after surface modification process; while wurtzite CdSe based samples have irregular shape indicating inhomogeneous shell growth, and are with lower quantum yield. Furthermore, in the photoluminescence spectra exited with UV radiation, wurtzite CdSe based samples show side peaks of independently nucleated nanocrystals from the shell material; while samples with zinc-blende CdSe cores are potent in restricting these byproducts, which may attribute to the highly effective arrestment of precursor ions onto the zinc-blende CdSe surface. These features manifest that zinc-blende CdSe is more talented than conventional wurtzite CdSe in achieving core/shell nanocrystals with higher qualities.