Structural and hydrophobic-hydrophilic properties of nanosilica/zirconia alone and with adsorbed PDMS

Two nanosilica A-300/zirconia (SZ) composites at zirconia content CZrO₂=5 and 20 wt.% were synthesized using a wet impregnation method with zirconium acetylacetonate as a precursor. The specific surface area of SZ is larger than that of A-300 because zirconia is composed of nanoparticles (crystallites of 4 nm in average size at CZrO₂=20 wt.%) smaller than those of the initial silica (d_av ≈ 11 nm). A-300 and SZ modified by polydimethylsiloxane (PDMS at molecular weight 1700 and 7960) in amounts of 5, 10, 15, 20 and 40 wt.% remained in the powder state with aggregates of primary particles smaller than those of A-300. SZ is more hydrophilic than silica but PDMS/SZ is more hydrophobic (maximum hydrophobic at C_PDMS 15-20 or 40 wt.%) than PDMS/A-300.     

Textural and electronic characteristics of mechanochemically activated composites with nanosilica and activated carbon

Nanosilicas (A-50, A-300, A-500)/activated carbon (AC, S_BET = 1520 m²/g) composites were prepared using short-term (5 min) mechanochemical activation (MCA) of powder mixtures in a microbreaker. Smaller silica nanoparticles of A-500 (average diameter d_av = 5.5 nm) can more easily penetrate into broad mesopores and macropores of AC microparticles than larger nanoparticles of A-50 (d_av = 52.4 nm) or A-300 (d_av = 8.1 nm). After MCA of silica/AC, nanopores of non-broken AC nanoparticles remained accessible for adsorbed N₂ molecules. According to ultra-soft X-ray emission spectra (USXES), MCA of silica/AC caused formation of chemical bonds Si-O-C; however, Si-C and Si-Si bonds were practically not formed. A decrease in intensity of OK_α band in respect to CK_α band of silica/AC composites with diminishing sizes of silica nanoparticles is due to both changes in the surface structure of particles and penetration of a greater number of silica nanoparticles into broad pores of AC microparticles and restriction of penetration depth of exciting electron beam into the AC particles.     

Enhanced photocatalytic activity of TiO2 nano-structured thin film with a silver hierarchical configuration

TiO₂ sol-gels with various Ag/TiO₂ molar ratios from 0 to 0.9% were used to fabricate silver-modified nano-structured TiO₂ thin films using a layer-by-layer dip-coating (LLDC) technique. This technique allows obtaining TiO₂ nano-structured thin films with a silver hierarchical configuration. The coating of pure TiO₂ sol-gel and Ag-modified sol-gel was marked as T and A, respectively. According to the coating order and the nature of the TiO₂ sol-gel, four types of the TiO₂ thin films were constructed, and marked as AT (bottom layer was Ag modified, surface layer was pure TiO₂), TA (bottom layer was pure TiO₂, surface layer was Ag modified), TT (pure TiO₂ thin film) and AA (TiO₂ thin film was uniformly Ag modified). These thin films were characterized by means of linear sweep voltammetry (LSV), X-ray diffraction (XRD), scanning electron microscopy (SEM), electrochemical impedance spectroscopy and transient photocurrent (I_ph). LSV confirmed the existence of Ag⁰ state in the TiO₂ thin film. SEM and XRD experiments indicated that the sizes of the TiO₂ nanoparticles of the resulting films were in the order of TT > AT > TA > AA, suggesting the gradient Ag distribution in the films. The SEM and XRD results also confirmed that Ag had an inhibition effect on the size growth of anatase nanoparticles. Photocatalytic activities of the resulting thin films were also evaluated in the photocatalytic degradation process of methyl orange. The preliminary results demonstrated the sequence of the photocatalytic activity of the resulting films was AT > TA > AA > TT. This suggested that the silver hierarchical configuration can be used to improve the photocatalytic activity of TiO₂ thin film.     

The tribology properties of alumina/silica composite nanoparticles as lubricant additives

The as-prepared alumina/silica (Al₂O₃/SiO₂) composite nanoparticles were synthesized with a hydrothermal method and modified by silane coupling agent. The tribological properties of the modified Al₂O₃/SiO₂ composite nanoparticles as lubricating oil additives were investigated by four-ball and thrust-ring tests in terms of wear scar diameter, friction coefficient, and the morphology of thrust-ring. It is found that their anti-wear and anti-friction performances are better than those of pure Al₂O₃ or SiO₂ nanoparticles. When the optimized concentration of nanoparticle additive is 0.5 wt.%, the diameters of wear scar and friction coefficients are both smallest. Such modified composite nanoparticles can adsorb onto the friction surfaces, which results in rolling friction. Therefore, the friction coefficient is reduced.     

The influence of pre-adsorbed water on adsorption of methane on fumed and nanoporous silicas

Co-adsorption of water and methane onto fumed (A-300, A-380) and micro/mesoporous (Gasil 200DF) silicas was studied. FTIR and ¹H NMR spectroscopy with layer-by-layer freezing-out of bound water were used at different levels of hydration (h = 0.005-1.0 g of water per gram of silica). Methane adsorption was largest (1-2 wt% at T < 280 K) for nanosilica A-300 (S_BET = 337 m²/g) at hydration h = 0.1 g of water per gram of silica for a non-equilibrated system. This sample was characterised by a large amount of weakly associated water (δ_H ≈ 1 ppm), and maximal clustering of all bound water. These conditions provide the increased microporosity necessary for enhanced methane adsorption. Heating and subsequent wetting, or long equilibration of nanosilica, decreased the adsorption of methane. The adsorption of methane on silica 200DF decreased with increasing amounts of pre-adsorbed water, characterised by significant associativity (δ_H ≈ 5 ppm) at h ≥ 0.005 g/g.     

Natural rubber nanocomposites using polystyrene-encapsulated nanosilica prepared by differential microemulsion polymerization

In this study, nanocomposites of natural rubber (NR) and polystyrene (PS)-encapsulated nanosilica were prepared by latex compounding method. The nanolatex of PS-encapsulated silica was synthesized via in situ differential microemulsion polymerization. The resulted hybrid nanoparticles showed core-shell morphology with an average diameter of 40 nm. The silica hybrid nanoparticles were subsequently used as filler for the NR nanocomposite. The properties of NR were found to be improved as a result of the incorporation of PS-encapsulated nanosilica at 3 and 3-9 parts per hundred rubber (phr) for tensile strength and modulus at 300% strain, respectively, except the elongation at break, and up to 9 phr for flammability. The results from dynamic mechanical analyzer showed that the elastic properties of NR near the glass transition temperature increased with the inclusion of increasing concentration of the PS-encapsulated nanosilica, causing by the semi-interpenetrating nanostructure in the NR nanocomposites.     

Enhanced photoluminescence of ZnO-SiO2 nanocomposite particles and the analyses of structure and composition

Stable blue-green photoluminescent ZnO-SiO₂ nanocomposite particles exhibiting quantum efficiency as high as 34.8% under excitation at 360 nm were prepared using a spray-drying process from a feed solution that contained both luminescent ZnO nanoparticles synthesized by a sol-gel method and commercially-available SiO₂ nanoparticles. The effects of silica nanoparticle size and SiO₂-to-ZnO concentration ratio on the PL properties of the composite particles were investigated. The internal structure and chemical composition were investigated in detail using elemental mapping, which revealed that ZnO nanoparticles were well-dispersed within silica nanoparticle matrix. At a LiOH concentration of 0.23 M, the predicted ZnO crystallite diameter before and after spray drying was approximately constant at 3.3 and 3.6 nm, respectively. This result indicates that ZnO particle growth was inhibited and therefore the PL property of ZnO nanoparticles was stably preserved in the composite.     

High surface area thermally stabilized porous iron oxide/silica nanocomposites via a formamide modified sol-gel process

Iron oxide/silica (Fe:Si as 1:10 atomic ratio) composite materials have been prepared by calcination for 3 h at different temperatures (400-900 °C) of xerogel precursor obtained via a formamide modified sol-gel process. The process involved TEOS and iron(III) nitrate, nitric acid and formamide. Genesis of the composite materials from the xerogel precursor has been investigated by TGA, DSC, FTIR, XRD, SEM and EDX. Results indicated that all the calcined composites are mainly composed of amorphous iron oxide dispersed as finely divided particles in amorphous silica matrixes. Nitrogen adsorption/desorption isotherms revealed a reversible type I of isotherms indicative of microporosity. However, high S_BET surface area and microsporosity were observed for the calcined composite materials (e.g. S_BET = 625 m² g⁻¹, and S_αs = 556 m² g⁻¹ for the composite calcined at 400 °C). Formation of the porous texture was discussed in terms of the action of formamide, which enhanced strengthening of the silica gel network during evaporation of the more volatile components within the composite body during the drying process.     

Materials and ion transport property studies on hot-press casted solid polymer electrolyte membranes: [(1 − x) PEO: x KIO3]

Materials and ion transport property characterization in Solid Polymer Electrolyte (SPE) membranes: (1 − x) PEO: x KIO₃, where x = 0, 10, 20, 30, 40, 50 wt.%, have been studied. SPE films have been prepared following two casting techniques: a novel hot-press (extrusion) and the traditional solution cast. Hot-press technique is a completely dry/solvent free/rapid/inexpensive procedure as compared to solution cast method and has recently been receiving wider acceptability to cast membranes of ion conducting polymeric electrolytes.‘Log σ − x’ study revealed σ-maxima at salt concentration x = 30 wt.% for SPE film prepared by both the methods. However, hot-pressed SPE film: 70 PEO: 30 KIO₃ exhibited relatively higher room temperature conductivity (σ ∼ 4.40 × 10^− 7 S cm^− 1) than that of the solution casted film. This has been referred to as Optimum Conducting Composition (OCC) SPE film. Materials characterization in OCC SPE film has been done by XRD, FTIR and DSC techniques. These studies confirmed the complexation of salt in the polymeric host. Some basic ionic parameters viz. conductivity (σ), ionic mobility (μ), mobile ion concentration (n), ionic transference number (t_ion) have been determined using different experimental procedures to understand the ion transport behaviour in OCC SPE material. The temperature dependent conductivity measurement has also been carried out and the activation energy (E_a) has been computed from the linear least square fitting of ‘log σ − 1 / T’ Arrhenius plot.     

Synthesis and luminescence properties of mesophase silica thin films doped with in-situ formed europium complex

Mesophase silica thin film doped with in-situ formed ternary Eu complex was synthesized by adding ligands (DBM=dibenzoylmethane, phen=1,10-phenanthroline), Eu ions (EuCl₃·6H₂O), and Pluronic P123 triblock copolymer into hydrolyzed tetramethoxy-silane (TMOS). The structure of this inorganic/organic film was characterized as a 2d-hexagonal structure by X-ray diffraction (XRD) and TEM analysis. The excitation spectra (λ_em=612 nm) and emission spectra (λ_ex=325 nm) indicated that the ternary complex, Eu-DBM-phen, was formed in-situ during the formation of the film. The mesophase silica thin film doped with the in-situ formed Eu complex showed a higher quantum efficiency compared to a pure Eu(DBM)₃phen complex and a mesophase silica thin film doped with in-situ formed binary Eu-phen complex.     

Magnetic nanocomposite spinel and FeCo core-shell and mesoporous systems

The fabrication of condensed silica and mesoporous silica coated spinel CoFe₂O₄ and FeCo alloy magnetic nanocomposites are reported. The encapsulation of well-defined 5 nm thick uniform silica layer on CoFe₂O₄ magnetic nanoparticles was performed. The formation of mesopores in the shell was a consequence of removal of organic group of the precursor through annealing. The NiO nanoparticles were loaded into the mesoporous silica. The mesoporous silica shells leads to a larger coercivity than that of pure CoFe₂O₄ magnetic nanoparticles due to the decrease of interparticle interactions and magneto-elastic anisotropy. In addition, the FeCo nanoparticles were coated by condensed and mesoporous silica. The condensed silica can protect the reactive FeCo alloy from oxidation up to 300 °C. However, saturation magnetization of FeCo nanoparticles coated by silica after 400 °C annealing is dramatically decreased due to the oxidation of the FeCo core. The mesoporous silica coated magnetic nanostructure loaded with NiO as a final product could be used in the field of biomedical applications.     

Optical properties of sol-gel fabricated Mn/SiO2 nanocomposites: Observation of surface plasmon resonance in Mn nanoparticles

Manganese nanoparticles were grown in silica glass and silica film on silicon substrate by annealing of the sol-gel prepared porous silicate matrices doped with manganese nitrate. Annealing of doped porous silicate matrices was performed at various conditions that allowed to obtain the nanocomposite glasses with various content of metallic Mn. TEM of Mn/SiO₂ glass indicates the bimodal size distribution of Mn nanoparticles with mean sizes of 10.5 nm and 21 nm. The absorption and photoluminescence spectra of Mn/SiO₂ glasses were measured. In the absorption spectra at 300 nm (4.13 eV) we observed the band attributed to the surface plasmon resonance in Mn nanoparticles. The spectra proved the creation of Mn²⁺ and Mn³⁺ ions in silica glass as well. The absorption spectra of Mn/SiO₂ glasses annealed in air prove the creation of manganese oxide Mn₂O₃. The measured reflection spectra of Mn/SiO₂ film manifest at 240-310 nm the peculiarity attributed to surface plasmons in Mn nanoparticles.     

Templated synthesis of monodisperse mesoporous maghemite/silica microspheres for magnetic separation of genomic DNA

A novel method is described for the preparation of superparamagnetic mesoporous maghemite (γ-Fe₂O₃)/silica (SiO₂) composite microspheres to allow rapid magnetic separation of DNA from biological samples. With magnetite (Fe₃O₄) and silica nanoparticles as starting materials, such microspheres were synthesized by the following two consecutive steps: (1) formation of monodispersed organic/inorganic hybrid microspheres through urea-formaldedyde (UF) polymerization and (2) removal of the organic template and phase transformation of Fe₃O₄ to γ-Fe₂O₃ by calcination at elevated temperatures. The as-synthesized particles obtained by heating at temperature 300 °C feature spherical shape and uniform particle size (d_particle=1.72 μm), high saturation magnetization (M_s=17.22 emu/g), superparamagnetism (M_r/M_s=0.023), high surface area (S_BET=240 m²/g), and mesoporosity (d_pore=6.62 nm). The composite microsphere consists of interlocked amorphous SiO₂ nanoparticles, in which cubic γ-Fe₂O₃ nanocrystals are homogeneously dispersed and thermally stable against γ- to α-phase transformation at temperatures up to 600 °C. With the exposed iron oxide nanoparticles coated with a thin layer of silica shell, the magnetic microspheres were used as a solid-phase adsorbent for rapid extraction of genomic DNA from plant samples. The results show that the DNA templates isolated from pea and green pepper displayed single bands with molecular weights greater than 8 kb and A₂₆₀/A₂₈₀ values of 1.60-1.72. The PCR amplification of a fragment encoding the endogenous chloroplast ndhB gene confirmed that the DNA templates obtained were inhibitor-free and amenable to sensitive amplification-based DNA technologies.     

Investigations on Fe doped polyvinyl alcohol films with and without gamma (γ)-irradiation

This paper deals with the preparation of pure and ferric chloride (FeCl₃) doped polyvinyl alcohol (PVA) films by solution casting method. Optical and electrical properties were systematically investigated. We have found the decrease in optical band gap energy of PVA films on doping FeCl₃. The optical band gap energy values in the present work are found to be 3.10 eV for pure PVA, 2 eV for PVA:Fe³⁺ (5 mol%), 1.91 eV for PVA:Fe³⁺(15 mol%) and 1.8 eV for PVA:Fe³⁺(25 mol%). Direct current electrical conductivity (σ) of pure, FeCl₃ doped PVA films in the temperature range 70-127 °C has been studied. At 387 K dc electrical conductivity of pure PVA film is 5.5795 μ Ω⁻¹ cm⁻¹, PVA:Fe³⁺ (5 mol%) film is 10.0936 μ Ω⁻¹ cm⁻¹ and γ-Irradiated PVA:Fe³⁺ (5 mol%) film for 900 CGY/min is 22.1950 μ Ω⁻¹ cm⁻¹. The result reveals the enhancement of the electrical conductivity with γ-irradiation. FT-IR study signifies the intermolecular hydrogen bonding between Fe³⁺ ions of FeCl₃ with OH group of PVA.     

Transparent nano composite PVA–TiO2 and PMMA–TiO2 thin films: Optical and dielectric properties

Transparent nano composite PVA–TiO₂ and PMMA–TiO₂ thin films were prepared by an easy and cost effective dip coating method. Al/PVA–TiO₂/Al and Al/PMMA–TiO₂/Al sandwich structures were prepared to study the dielectric behavior. The presence of metal–oxide (Ti–O) bond in the prepared films was confirmed by Fourier transform infrared spectroscopy. X-ray diffraction pattern indicated that the prepared films were predominantly amorphous in nature. Scanning electron micrographs showed cluster of TiO₂ nanoparticles distributed over the film surface and also there were no cracks and pin holes on the surface. The transmittance of the films was above 80% in the visible region and the optical band gap was estimated to be about 3.77 eV and 3.78 eV respectively for PVA–TiO₂ and PMMA–TiO₂ films by using Tauc's plot. The determined refractive index (n) values were between 1.6 and 2.3. High value of dielectric constant (?′ = 24.6 and ?′ = 26.8) was obtained for the prepared composite films. The conduction in the composite films was found to be due to electrons. The observed amorphous structure, good optical properties and dielectric behavior of the prepared nano composite thin films indicated that these films could be used in opto-electronic devices and in thin film transistors.     

Desorption of surfactant and sintering of surface-modified PdxNi1 − x nanoparticles

A series of Pd_xNi_1 − x nanoparticles in a diameter of 6-7 nm were prepared by wet chemical reduction. They were then modified with two surfactants, stearic acid (SA) and polyethylene glycol (PEG). Desorption of the surfactant was studied using a temperature programmed desorption technique, and the sintering behavior of surface-modified Pd_xNi_1 − x nanoparticles was examined. Since surface energy of the nanoparticles depends on the alloy composition, it can be correlated with the desorption temperature of surfactant from the nanoparticle surface. Because Ni has a higher surface energy, the surfactant desorption temperature increases as the Ni content increases. With the same stoichiometry, the desorption temperature of SA is always higher than that of PEG. The SA-modified nanoparticles have higher thermal stability and are less sintered than PEG-modified nanoparticles. The sintering and growth behavior of the nanoparticles can be correlated with variation of surface energy due to different surface modification.     

Model design on calculations of microwave permeability and permittivity of Fe/SiO2 particles with core/shell structure

Fe/SiO₂ particles with core/shell structure were prepared by coating silica on the surface of a commercial spherical carbonyl iron via the hydrolysis process of tetraethyl orthosilicate (TEOS). The electromagnetic performance of commercial carbonyl iron and as-prepared Fe/SiO₂ particles was studied theoretically and experimentally. As predicted by the theoretical calculation based on the Bruggeman formula and the Landau–Lifshitz–Gilbert (LLG) theory, the insulating surface layer of silica was effective to reduce the permittivity parameters of pure carbonyl iron. The measured results showed good agreement with the theoretical prediction. Although there was a little decrease in the permeability of the Fe/SiO₂ core/shell particles, a better impedance match especially at higher frequency range was obtained when used as a microwave absorber. The reflection loss (RL) curves show that the lowest reflection loss of Fe/Epoxy composite (−20.5 GHz) was obtained corresponding to the frequency of 8.5 GHz when the thickness of the absorber was 3 mm. A different trend was observed in Fe/SiO₂/Epoxy composite. The reflection loss value got lower by decreasing the thickness of absorbers. At the thickness of 2.2 mm, a relative low reflection loss (−17 GHz) corresponding to the frequency of 13.6 GHz was obtained. Compared with the Fe/Epoxy composite, the improvement on shifting the reflection loss peak to higher frequency and on reducing the optimal thickness of absorbers was made by Fe/SiO₂/Epoxy composite.     

High concentration of hematite nanoparticles in a silica matrix: Structural and magnetic properties

The α-Fe₂O₃/SiO₂ nanocomposite containing 45 wt% of hematite was prepared by the sol-gel method followed by heating in air at 200 °C. The so-obtained composite of iron(III) nanoparticles dissolved in glassy silica matrix was investigated by X-ray powder diffraction (XRPD), transmission electron microscopy (TEM), and superconducting quantum interference device (SQUID) magnetometry. XRPD confirms the formation of a single-phase hematite sample, whereas TEM reveals spherical particles in a silica matrix with an average diameter of 10 nm. DC magnetization shows bifurcation of the zero-field-cooled (ZFC) and field-cooled (FC) branches up to the room temperature with a blocking temperature T_B=65 K. Isothermal M(H) dependence displays significant hysteretic behaviour below T_B, whereas the room temperature data were successfully fitted to a weighted Langevin function. The average particle size obtained from this fit is in agreement with the TEM findings. The small shift of the T_B value with the magnetic field strength, narrowing of the hysteresis loop at low applied field, and the frequency dependence of the AC susceptibility data point to the presence of inter-particle interactions. The analysis of the results suggests that the system consists of single-domain nanoparticles with intermediate strength interactions.     

Surface properties and water treatment capacity of surface engineered silica coated with 3-(2-aminoethyl) aminopropyltrimethoxysilane

This study's focus was on the water-based, one-pot preparation and characterisation of silica particles coated with 3-(2-aminoethyl)aminopropyltrimethoxysilane (Diamo) and the efficiency of the material in removing the pathogens Escherichia coli, Pseudomonas aeruginosa, Mycobacterium immunogenum, Vibrio cholerae, poliovirus, and Cryptosporidium parvum. The water-based processing resulted in Diamo coated silica particles with significantly increased positive surface charge as determined by zeta potential measurements. In addition, X-ray photoelectron spectrometry of pure and Diamo coated silica confirmed the presence of Diamo on the surface of the particles. Thermogravimetric measurements and chemical analysis of the silica indicated a surface concentration of amine groups of about 1 mmol/g_silica. Water treatment tests with the pathogens showed that a dose of about 10 g appeared to be sufficient to remove pathogens from pure water samples which were spiked with pathogen concentrations between about 10² and 10⁴ cfu/mL.     

Hydrogen peroxide biosensor based on gold nanoparticles/thionine/gold nanoparticles/multi-walled carbon nanotubes-chitosans composite film-modified electrode

In this paper, an amperometric electrochemical biosensor for the detection of hydrogen peroxide (H₂O₂), based on gold nanoparticles (GNPs)/thionine (Thi)/GNPs/multi-walled carbon nanotubes (MWCNTs)-chitosans (Chits) composite film was developed. MWCNTs-Chits homogeneous composite was first dispersed in acetic acid solution and then the GNPs were in situ synthesized at the composite. The mixture was dripped on the glassy carbon electrode (GCE) and then the Thi was deposited by electropolymerization by Au-S or Au-N covalent bond effect and electrostatic adsorption effect as an electron transfer mediator. Finally, the mixture of GNPs and horseradish peroxidase (HRP) was assembled onto the modified electrode by covalent bond. The electrochemical behavior of the modified electrode was investigated by scanning electron microscope, cyclic voltammetry and chronoamperometry. This study introduces the in situ-synthesized GNPs on the other surface of the modified materials in H₂O₂ detection. The linear response range of the biosensor to H₂O₂ concentration was from 5 × 10⁻⁷ mol L⁻¹ to 1.5 × 10⁻³ mol L⁻¹ with a detection limit of 3.75 × 10⁻⁸ mol L⁻¹ (based on S/N = 3).