抑制相位噪声实现主动锁模光纤激光器稳定工作

腔长漂移是引起主动锁模光纤激光器不稳定的一个主要原因。通过理论分析得出了主动锁模光纤激光器输出脉冲相位噪声和腔长漂移的关系，并采用抑制相位噪声的方法实现了主动锁模光纤激光器长达８小时的稳定工作。     

8字形主被动锁模掺Er3+光纤激光器

在理论上分析了利用非线性光学环形镜作为等效可饱和吸收体压缩脉冲进行锁模的物理机制。利用8字形主被动混合锁模的结构在调制频率2．498749GHz下，在1．543μm处获得了12ps的锁模脉冲输出，对应谱宽0．22nm，时间脉宽积0．33。在抽运功率50mW情况下，输出脉冲平均功率3．715mW。在调制频率2．499344GHz、2．499114GHz和2．498999GHz时分别并获得了2～4阶幅度较为均衡的有理数谐波锁模脉冲序列。     

Soliton Transmission Using Actively Mode－locked Fiber Ring Laser at 2．5GHz and 5GHz

ＳｏｌｉｔｏｎＴｒａｎｓｍｉｓｓｉｏｎＵｓｉｎｇＡｃｔｉｖｅｌｙＭｏｄｅ－ｌｏｃｋｅｄＦｉｂｅｒＲｉｎｇＬａｓｅｒａｔ２．５ＧＨｚａｎｄ５ＧＨｚ￥ＺＨＯＮＧＳｈａｎ；ＬＯＵＣａｉｙｕｎ；ＬＩＵＪｕｎ；ＧＡＯＹｉｚｈｉ；ＺＨＯＵＢｉｎｇｋｕｎ（Ｄｅｐｔ...     

被动谐波锁模Er3+/Yb3+共掺双包层光纤环形腔激光器

 为了实现高重复频率和高功率的光脉冲,实验采用Er³⁺/Yb³⁺共掺双包层光纤作为增益介质,稳定的中心波长为976 nm的高功率半导体激光器作为泵浦源,利用非线性偏振旋转锁模技术,得到稳定的自起振锁模光脉冲。当泵浦功率为2.4 W时,激光器输出重复频率为8.829 MHz的连续锁模光脉冲,平均输出功率为52.5 mW,自起振锁模泵浦阈值功率为0.6 W,并观测到了稳定的高阶谐波锁模、调Q和调Q-锁模光脉冲输出。     

基于半导体光放大器的非归零信号时钟恢复

提出了一种基于半导体光放大器加窄带光纤光栅滤波器，将非归零信号转换为伪归零信号，再把伪归零信号注入到主动锁模环行腔激光器进行时钟提取的非归零信号时钟恢复方案.利用该方案实现了10 Gb/s伪随机非归零信号的全光时钟恢复，对工作原理和结果进行了分析和讨论.实验证明该方案具有结构简单，调整容易，输出波形好的特点.     

用半导体激光器作调制器的双波长可调谐锁模光纤激光器

提出一种用法布里—珀罗腔半导体激光器(F—PLD)作调制器，用线性凋啾光栅(LCFG)进行波长选择的双波长环形腔主动锁模光纤激光器。利用线性凋啾光栅在腔内的色散效应使两个波长的光脉冲通过饵光纤(EDF)时在时域上分开，从而威小了不同波长的光脉冲同时通过饵光纤时造成的竞争，因此可以在室温下获得波长间隔较小的稳定的双波长光脉冲输出。实验中成功地获得了重复频率约为2GHz，波长间隔为0．92nm的稳定双波长光脉冲，并通过调谐线性凋啾光栅中心波长的位置使激光波长可以在约3nm范围内调谐。     

Actively mode-locked dual-wavelength fiber laser with close wavelength spacing using a fiber Bragg grating

A simple actively mode-locked fiber ring laser is proposed and successfully demonstrated to generate dual-wavelength picosecond pulses with close wavelength spacing using one Bragg grating in standard single-mode fiber. The proposed laser can be made to operate in stable dual-wavelength at room temperature, due to the birefringence characteristic of the FBG induced by transverse strain. Transverse strain loading on the FBG allows the wavelength spacing to be controlled. Generation of stable dual-wavelength pulses with a pulsewidth of 212–234 ps and a tunable wavelength separation from 0.2 to 0.44 nm at a pulse rate of 1.05 GHz was demonstrated.     

Design optimization of all-optical actively mode-locked ring laser based on cross-gain modulation in a semiconductor optical amplifier

A complete and detailed model is presented that describes the main physical phenomena that occur in an actively mode-locked fiber ring laser based on cross-gain modulation in a semiconductor optical amplifier employed as both the gain medium and mode-locking element. The relationship between key laser parameters and the output pulse characteristics is numerically analyzed to provide simple design rules and derive a set of necessary operational conditions. The adoption of these rules and the satisfaction of these conditions enables the optimization of the laser performance and the generation of short and high energy mode-locked output pulses.     

10GHz可调谐主动锁模光纤激光器

主动锁模光纤激光器研制的难点在于克服不稳定性,本文提出解决其长期和短期不稳定的方法,分析了它们的工作原理,通过试验证明该两项技术使主动锁模光纤激光器实现了自稳定运转,在全部采用国产非保偏光纤的条件下稳定运行时间超过8h,激光器重复频率为10GHz,脉宽10ps,谱宽为0.317nm,时间带宽积为0.403,调谐范围为39nm。     

808nm波长光纤耦合高功率半导体激光器

In this paper, we report the stabilized 10-GHz actively mode-locked fiber ring laser constructed with non-polarization-maintained fiber. Long term stabilization was achieved by synchronous modulation technology, based on an error signal extraction and procession circuit. The output pulses maintained very well over 8 hours with the pulse width of ～11 ps and the spectrum width of ～0.37 nm. Meanwhile the output power and the center wavelength of the output pulse also kept stable at 1.6 mW and 1550.3 nm respectively. The output pulses were additionally compressed to 2 ps by high order soliton effect.     

全光纤超短脉冲掺Yb3+光纤环形激光器

讨论了自启动被动锁模掺Yb³⁺光纤环形激光器产生短脉冲的机理，并研制出全光纤结构超短脉冲掺Yb³⁺光纤环形激光器.采用两个976nm半导体激光器级联抽运作为抽运源，高掺杂浓度掺Yb³⁺光纤作为增益介质，利用光纤的非线性偏振旋转效应，得到自启动、十分稳定的ps量级锁模光脉冲.激光器锁模阈值功率260mW，输出功率25mW，锁模光脉冲中心波长1056nm，3dB带宽11.7nm，重复频率20MHz.与其他结构光纤激光器相比，这种全光纤结构具有更高的效率和更好的稳定性. 关键词： 环形光纤激光器 3+光纤')" href="#">高掺杂浓度掺Yb³⁺光纤 自启动 被动锁模     

被动锁模Yb3+光纤环形腔激光器的研究

 采用974 nm半导体激光器作为泵浦源，超高掺杂Yb³⁺光纤作为增益介质，利用光纤的非线性偏振旋转效应，得到稳定的ps量级锁模光脉冲。泵浦功率220 mW时，激光器锁模阈值功率150 mW，输出功率26 mW，锁模光脉冲中心波长1 046 nm，3 dB带宽6.01 nm，20 dB带宽16 nm，脉宽22 ps，重复频率20 MHz。与同类光纤激光器相比，该激光器输出功率高，具有更好的稳定性。     

Multiwavelength actively mode-locked fiber ring laser with a dispersion compensated cavity

A multiwavelength actively mode-locked fiber ring laser that utilises a single semiconductor optical amplifier as both a gain and mode-locking element is presented. It is verified experimentally that the number of mode-locked wavelengths may be maximised by compensating for the anomalous intra-cavity dispersion. This is achieved through the inclusion of an appropriate length of normal dispersion fiber in the laser cavity. Using this technique, the number of wavelengths simultaneously mode-locked at 10 GHz was increased from 2 to 5.     

环形腔被动锁模掺饵光纤激光器

通过在非线性偏振旋转环形腔内引入一种可旋转的在线起偏器,在保证装置的全光纤化结构的前提下,简化了被动锁模光纤激光器的结构.通过联合调节可旋转的在线起偏器、1/2波片和1/4波片的角度实现了掺饵光纤锁模脉冲20 nm间隔的双波长调谐输出,调谐过程中观察到了锁模脉冲双波长状态.另外,从装置中去掉1/2波片后,仅调谐可旋转的在线起偏器和1/4波片也能够实现锁模脉冲的单波长稳定输出.     

环形腔被动锁模掺饵光纤激光器

通过在非线性偏振旋转环形腔内引入一种可旋转的在线起偏器,在保证装置的全光纤化结构的前提下,简化了被动锁模光纤激光器的结构.通过联合调节可旋转的在线起偏器、1/2波片和1/4波片的角度实现了掺饵光纤锁模脉冲20nm间隔的双波长调谐输出,调谐过程中观察到了锁模脉冲双波长状态.另外,从装置中去掉1/2波片后,仅调谐可旋转的在线起偏器和1/4波片也能够实现锁模脉冲的单波长稳定输出.     

A Simple Configuration for Discontinuous Wavelength-tuning Optical Pulse Source

A simple configuration is proposed to perform wavelength switching in actively mode-locked fiber ring lasers, in which a sampled fiber Bragg grating and a tunable optical filter are cascaded in the ring cavity to exactly select the operating wavelength. The switching of four wavelengths with a spacing of 1.6 nm is obtained. The experimental results demonstrate that this technique is reliable and convenient.     

飞秒被动锁模环形腔掺Er3＋光纤激光器

在考虑增益、损耗、群速度色散、自相位调制、快速可饱和吸收体等各种参数同时作用情况下，分析了非线性偏振旋转效应自启动锁模机理，研究了腔体参数与锁模脉冲之间的关系，并给出飞秒被动锁模环形腔掺Er3＋光纤激光器实验原理。实验采用性能稳定的980nm半导体激光器作为抽运源，高掺杂短长度掺Er3＋光纤作为增益介质，利用非线性偏振旋转锁模技术，得到了稳定的飞秒自起振锁模光脉冲。抽运功率为23mW时，激光器输出锁模脉冲中心波长1552nm，3dB带宽为7.6nm，重复频率14.0MHz，平均输出功率0.43mW，自起振锁模泵浦阈值功率11.5mW,并观测到了稳定的高阶锁模脉冲输出。该激光器与报道过的相同结构光纤激光器相比,自起振泵浦阈值低、脉冲能量高、稳定性好，且频谱边带幅度小。     

单偏振控制器环形腔光纤激光器实验研究

理论分析了非线性偏振旋转环形腔作为类饱和可吸收体获得脉冲的物理机理。在光纤环形腔结构中,采用单个偏振控制器实现了非线性偏振旋转锁模,直接获得了脉冲宽度为131 fs的超短脉冲输出。实验中,采用性能稳定的976 nm半导体二极管激光器作为抽运源,使用高掺杂浓度的Er3 光纤为增益介质,通过调节偏振控制器,获得了光谱谱宽(3 dB带宽处)为23.5 nm的稳定锁模脉冲输出。脉冲中心波长为1535.9 nm,平均功率为5.91 mW,脉冲重复率为11.20 MHz。     

Radio frequency interrogated actively mode-locked fiber ring laser for sensing application

This paper proposes an actively mode-locked fiber ring laser for sensing applications. Mode-locking of the laser is achieved by driving an electro-optic amplitude modulator at an RF corresponding to the fundamental beat frequency between the longitudinal modes. The change of the cavity length produces a frequency comb around the beat frequencies. The frequency separation of the comb is found to be linearly proportional to the cavity length change. The sensing mechanism of the device is shown. Temperature measurement is demonstrated using the proposed actively mode-locked fiber ring laser.     

Mode locking of an erbium-doped fiber laser with intra-cavity polarization modulation

Erbium-doped fiber lasers are normally actively mode-locked through amplitude modulation or phase modulation. In this paper, we demonstrate that the laser can also be mode-locked by employing polarization modulation with a polarization-dependent cavity loss. We obtain a nearly transform-limited mode-locked pulse train at 10 GHz repetition rate with timing jitter as low as 164 fs. The timing jitter is only limited by the timing jitter of the driving signal.