Effects of pressure rise rate on laminar flame speed under normal and engine-relevant conditions

Laminar flame speed (LFS) is one of the most important physicochemical properties of a combustible mixture. At normal and elevated temperatures and pressures, LFS can be measured using propagating spherical flames in a closed chamber. LFS is also used in certain turbulent premixed flame modelling for combustion in spark ignition engines. Inside the closed chamber or engine, transient pressure rise occurs during the premixed flame propagation. The effects of pressure rise rate (PRR) on LFS are examined numerically in this study. One-dimensional simulations are conducted for spherical flame propagation in a closed chamber. Detailed chemistry and transport are considered. Different values of PRR at the same temperature and pressure are achieved through changing the spherical chamber size. It is found that the effect of PRR on LFS is negligible under the normal and engine-relevant conditions considered in this study. This observation is then explained through the comparison between the unsteady and convection terms in the energy equation for a premixed flame.     

Effects of compression and stretch on the determination of laminar flame speeds using propagating spherical flames

The effects of flow compression and flame stretch on the accurate determination of laminar flame speeds at normal and elevated pressures using propagating spherical flames at constant pressure or constant volume are studied theoretically and numerically. The results show that both the compression-induced flow motion and flame stretch have significant impacts on the accuracy of flame speed determination. For the constant pressure method, a new method to obtain a compression-corrected flame speed (CCFS) for nearly constant pressure spherical bomb experiments is presented. Likewise, for the constant volume method, a technique to obtain a stretch-corrected flame speed (SCFS) at elevated pressures and temperatures is developed. The validity of theoretical results for both constant pressure and constant volume methods is demonstrated by numerical simulations using detailed chemistry for hydrogen/air, methane/air, and propane/air mixtures. It is shown that the present CCFS and SCFS methods not only improve the accuracy of the flame speed measurements significantly but also extend the parameter range of experimental conditions. The results can be used directly in experimental measurements of laminar flame speeds.     

Characterization of the effects of pressure and hydrogen concentration on laminar burning velocities of methane–hydrogen–air mixtures

The aim of the present work was to characterize both the effects of pressure and of hydrogen addition on methane/air premixed laminar flames. The experimental setup consists of a spherical combustion chamber coupled to a classical shadowgraphy system. Flame pictures are recorded by a high speed camera. Global equivalence ratios were varied from 0.7 to 1.2 for the initial pressure range from 0.1 to 0.5 MPa. The mole fraction of hydrogen in the methane + hydrogen mixture was varied from 0 to 0.2. Experimental results were compared to calculations using a detailed chemical kinetic scheme (GRIMECH 3.0). First, the results for atmospheric laminar CH₄/air flames were compared to the literature. Very good agreements were obtained both for laminar burning velocities and for burned gas Markstein length. Then, increasing the hydrogen content in the mixture was found to be responsible for an increase in the laminar burning velocity and for a reduction of the flame dependence on stretch. Transport effects, through the reduction of the fuel Lewis number, play a role in reducing the sensitivity of the fundamental flame velocity to the stretch. Finally, when the pressure was increased, the laminar burning velocity decreased for all mixtures. The pressure domain was limited to 0.5 MPa due to the onset of instabilities at pressures above this value.     

On laminar premixed flame propagating into autoigniting mixtures under engine-relevant conditions

Usually premixed flame propagation and laminar burning velocity are studied for mixtures at normal or elevated temperatures and pressures, under which the ignition delay time of the premixture is much larger than the flame resistance time. However, in spark-ignition engines and spark-assisted compression ignition engines, the end-gas in the front of premixed flame is at the state that autoignition might happen before the mixture is consumed by the premixed flame. In this study, laminar premixed flames propagating into an autoigniting dimethyl ether/air mixture are simulated considering detailed chemistry and transport. The emphasis is on the laminar burning velocity of autoigniting mixtures under engine-relevant conditions. Two types of premixed flames are considered: one is the premixed planar flame propagating into an autoigniting DME/air without confinement; and the other is premixed spherical flame propagating inside a closed chamber, for which four stages are identified. Due to the confinement, the unburned mixture is compressed to high temperature and pressure close to or under engine-relevant conditions. The laminar burning velocity is determined from the constant-volume propagating spherical flame method as well as PREMIX. The laminar burning velocities of autoigniting DME/air mixture at different temperatures, pressures, and autoignition progresses are obtained. It is shown that the first-stage and second-stage autoignition can significantly accelerate the flame propagation and thereby greatly increase the laminar burning velocity. When the first-stage autoignition occurs in the unburned mixture, the isentropic compression assumption does not hold and thereby the traditional method cannot be used to calculate the laminar burning velocity. A modified method without using the isentropic compression assumption is proposed. It is shown to work well for autoigniting mixtures. Besides, a power law correlation is obtained based on all the laminar burning velocity data. It works well for mixtures before autoignition while improvement is still needed for mixtures after autoignition.     

Stabilization, propagation and instability of tribrachial triple flames

A tribrachial (or triple) flame is one kind of edge flame that can be encountered in nonpremixed mixing layers, consisting of a lean and a rich premixed flame wing together with a trailing diffusion flame all extending from a single point. The flame could play an important role on the characteristics of various flame behaviors including lifted flames in jets, flame propagation in two-dimensional mixing layers, and autoignition fronts. The structure of tribrachial flame suggests that the edge is located along the stoichiometric contour in a mixing layer due to the coexistence of all three different types of flames. Since the edge has a premixed nature, it has unique propagation characteristics. In this review, the propagation speed of tribrachial flames will be discussed for flames propagating in mixing layers, including the effects of concentration gradient, velocity gradient, and burnt gas expansion. Based on the tribrachial edge structure observed experimentally in laminar lifted flames in jets, the flame stabilization characteristics including liftoff height, reattachment, and blowout behaviors and their buoyancy-induced instability will be explained. Various effects on liftoff heights in both free and coflow jets including jet velocity, the Schmidt number of fuel, nozzle diameter, partial premixing of air to fuel, and inert dilution to fuel are discussed. Implications of edge flames in the modeling of turbulent nonpremixed flames and the stabilization of turbulent lifted flames in jets are covered.     

Measurements of burning velocities of dimethyl ether and air premixed flames at elevated pressures

Laminar burning velocities of dimethyl ether (DME) and air premixed flames at elevated pressures up to 10 atm were measured by using a newly developed pressure-release type spherical bomb. The measurement system was validated using laminar burning velocities of methane–air flames. A comparison with the previous experimental data shows an excellent agreement and demonstrates the accuracy and reliability of the present experimental system. The measured flame speeds of DME–air flames were compared with the previous experimental data and the predictions using the full and reduced mechanisms. At atmospheric pressure, the measured laminar burning velocities of DME–air flames are in reasonable agreement with the previous data from spherical bomb method, but are much lower than both predictions and the experimental data of the PIV based counterflow flame measurements. The laminar burning velocities of DME–air flames at 2, 6, and 10 atm were also measured. It was found that flame speed decreases considerably with the increase of pressure. Moreover, the measured flame speeds are also lower than the predictions at high pressures. In addition, experiments showed that at high pressures the rich DME–air flames are strongly affected by the hydrodynamic and thermal-diffusive instabilities. Markstein lengths and the overall reaction order at different equivalence ratios were extracted from the flame speed data at elevated pressures. Sensitivity analysis showed that reactions involving methyl and formyl radicals play an important role in DME–air flame propagation and suggested that systematic modification of the reactions rates associated with methyl and formyl formations are necessary to reduce the discrepancies between predictions and measurements.     

Effect of Soret diffusion on lean hydrogen/air flames at normal and elevated pressure and temperature

The influence of Soret diffusion on lean premixed flames propagating in hydrogen/air mixtures is numerically investigated with a detailed chemical and transport models at normal and elevated pressure and temperature. The Soret diffusion influence on the one-dimensional (1D) flame mass burning rate and two-dimensional (2D) flame propagating characteristics is analysed, revealing a strong dependency on flame stretch rate, pressure and temperature. For 1D flames, at normal pressure and temperature, with an increase of Karlovitz number from 0 to 0.4, the mass burning rate is first reduced and then enhanced by Soret diffusion of H₂ while it is reduced by Soret diffusion of H. The influence of Soret diffusion of H₂ is enhanced by pressure and reduced by temperature. On the contrary, the influence of Soret diffusion of H is reduced by pressure and enhanced by temperature. For 2D flames, at normal pressure and temperature, during the early phase of flame evolution, flames with Soret diffusion display more curved flame cells. Pressure enhances this effect, while temperature reduces it. The influence of Soret diffusion of H₂ on the global consumption speed is enhanced at elevated pressure. The influence of Soret diffusion of H on the global consumption speed is enhanced at elevated temperature. The flame evolution is more affected by Soret diffusion in the early phase of propagation than in the long run due to the local enrichment of H₂ caused by flame curvature effects. The present study provides new insights into the Soret diffusion effect on the characteristics of lean hydrogen/air flames at conditions that are relevant to practical applications, e.g. gas engines and turbines.     

Effects of gas compressibility on the dynamics of premixed flames in long narrow adiabatic channels

We examine the dynamics of premixed flames in long, narrow, adiabatic channels focusing, in particular, on the effects of gas compressibility on the propagation. Recognising the importance of the boundary conditions, we examine and compare three cases: flame propagation in channels open at both ends, where the pressure must adjust to the ambient pressure at both ends and the expanding gas is allowed to leave the channel freely, and flame propagation in channels that remain closed at one of the two ends, where the burned/unburned gas remains trapped between the flame and one of the two walls. Earlier studies have shown that a flame accelerates when travelling down a narrow channel as a result of the combined effects of wall friction and thermal expansion. In the present work we show that compressibility effects enhance the transition to fast accelerating flames in channels open at both ends and in channels closed at the ignition end. In both situations, the accelerating flames could reach values that, depending on the effective Mach number, are as large as fifty times the laminar flame speed. In contrast, when the channel is closed at the far end, the acceleration is limited and the propagation speed is damped as the flame approaches the far boundary. Moreover, we show that, in channels closed at their ignition end, the flame in sufficiently long channels evolves into a steadily propagating compression-driven flame. The propagation speed of these flames depends exponentially on the constant-volume equilibrium temperature, which is higher than the (constant pressure) adiabatic flame temperature, and is therefore larger than for ordinary isobaric flames. Fast propagating compression waves cannot emerge in channels that remain open at their ignition end because of the reduced pressure forced by the open boundary.     

Stabilization mechanism of lifted flame edge in the near field of coflow jets for diluted methane

The stabilization mechanism of lifted flames in the near field of coflow jets has been investigated experimentally and numerically for methane fuel diluted with nitrogen. The lifted flames were observed only in the near field of coflow jets until blowout occurred in the normal gravity condition. To elucidate the stabilization mechanism for the stationary lifted flames of methane having the Schmidt number smaller than unity, the behavior of the flame in the buoyancy-free condition, and unsteady propagation characteristics after ignition were investigated numerically at various conditions of jet velocity. It has been found that buoyancy plays an important role for flame stabilization of lifted flames under normal gravity, such that the flame becomes attached to the nozzle in microgravity. The stabilization mechanism is found to be due to the variation of the propagation speed of the lifted flame edge with axial distance from the nozzle in the near field of the coflow as compared to the local flow velocity variation at the edge.     

Flame propagation speed and Markstein length of spherically expanding flames: Assessment of extrapolation and measurement techniques

Laminar burning velocities are of great importance in many combustion models as well as for validation and improvement of chemical kinetic schemes. Determining laminar burning velocities with high accuracy is quite challenging and different approaches exist. Hence, a comparison of existing methods measuring and evaluating laminar burning velocities is of interest. Here, two optical diagnostics, high speed tomography and Schlieren cinematography, are simultaneously set up to investigate methods for evaluating laminar flame speed in a spherical flame configuration. The hypothesis to obtain the same flame propagation radii over time with the two different techniques is addressed. Another important aspect is the estimation of flame properties, such as the unstretched flame propagation speed and Markstein length in the burnt gas phase and if these are estimated satisfactorily by common experimental approaches. Thorough evaluation of the data with several extrapolation techniques is undertaken. A systematic extrapolation approach is presented to give more confidence into results generated experimentally. The significance of the linear extrapolation routine is highlighted in this context. Measurements of spherically expanding flames are carried out in two high-pressure, high-temperature, constant-volume vessels at RWTH in Aachen, Germany and at ICARE in Orleans, France. For the discussion of the systematic extrapolation approach, flame speed measurements of methane / air mixtures with mixture Lewis numbers moderately away from unity are used. Conditions were varied from lean to rich mixtures, at temperatures of 298–373 K, and pressures of 1 atm and 5 bar.     

A diffuse interface Lox/hydrogen transcritical flame model

We present a diffuse-interface all-pressure flame model that transitions smoothly between subcritical and supercritical conditions. The model involves a non-equilibrium liquid/gas diffuse interface of van der Waals/Korteweg type embedded into a non-ideal multicomponent reactive fluid. The multicomponent transport fluxes are evaluated in their thermodynamic form in order to avoid singularities at thermodynamic mechanical stability limits. The model also takes into account condensing liquid water in order to avoid thermodynamic chemical instabilities. The resulting equations are used to investigate the interface between cold dense and hot light oxygen as well as the structure of diffusion flames between cold dense oxygen and gaseous-like hydrogen at all pressures, either subcritical or supercritical.     

Structure of propagating edge diffusion flames in hydrocarbon fuel jets

Direct numerical simulations with a C₃-chemistry model have been performed to investigate the transient behavior and internal structure of flames propagating in an axisymmetric fuel jet of methane, ethane, ethylene, acetylene, or propane in normal earth gravity (1g) and zero gravity (0g). The fuel issued from a 3-mm-i.d. tube into quasi-quiescent air for a fixed mixing time of 0.3 s before it was ignited along the centerline where the fuel–air mixture was at stoichiometry. The edge of the flame formed a vigorously burning peak reactivity spot, i.e., reaction kernel, and propagated through a flammable mixture layer, leaving behind a trailing diffusion flame. The reaction kernel broadened laterally across the flammable mixture layer and possessed characteristics of premixed flames in the direction of propagation and unique flame structure in the transverse direction. The reaction kernel grew wings on both fuel and air sides to form a triple-flame-like structure, particularly for ethylene and acetylene, whereas for alkanes, the fuel-rich wing tended to merge with the main diffusion flame zone, particularly methane. The topology of edge diffusion flames depend on the properties of fuels, particularly the rich flammability limit, and the mechanistic oxidation pathways. The transit velocity of edge diffusion flames, determined from a time series of calculated temperature field, equaled to the measured laminar flame speed of the stoichiometric fuel–air mixtures, available in the literature, independent of the gravity level.     

Combustion mechanism of ultralean rotating counterflow twin premixed flame

In our previous numerical studies [Nishioka Makihito, Zhenyu Shen, and Akane Uemichi. “Ultra-lean combustion through the backflow of burned gas in rotating counterflow twin premixed flames.” Combustion and Flame 158.11 (2011): 2188–2198. Uemichi Akane, and Makihito Nishioka. “Numerical study on ultra-lean rotating counterflow twin premixed flame of hydrogen–air.” Proceedings of the Combustion Institute 34.1 (2013): 1135–1142]. we found that methane– and hydrogen–air rotating counterflow twin flames (RCTF) can achieve ultralean combustion when backward flow of burned gas occurs due to the centrifugal force created by rotation. In this study, we investigated the mechanisms of ultralean combustion in these flames by the detailed numerical analyses of the convective and diffusive transport of the main species. We found that, under ultralean conditions, the diffusive transport of fuel exceeds its backward convective transport in the flame zone, which is located on the burned-gas side of the stagnation point. In contrast, the relative magnitudes of diffusive and convective transport for oxygen are reversed compared to those for the fuel. The resulting flows for fuel and oxygen lead to what we call a ‘net flux imbalance’. This net flux imbalance increases the flame temperature and concentrations of active radicals. For hydrogen–air RCTF, a very large diffusivity of hydrogen enhances the net flux imbalance, significantly increasing the flame temperature. This behaviour is intrinsic to a very lean premixed flame in which the reaction zone is located in the backflow of its own burned gas.     

An assessment of large eddy simulations of premixed flames propagating past repeated obstacles

This paper presents an assessment of Large Eddy Simulations (LES) in calculating the structure of turbulent premixed flames propagating past solid obstacles. One objective of the present study is to evaluate the LES simulations and identify the drawbacks in accounting the chemical reaction rate. Another objective is to analyse the flame structure and to calculate flame speed, generated overpressure at different time intervals following ignition of a stoichiometric propane/air mixture. The combustion chamber has built-in repeated solid obstructions to enhance the turbulence level and hence increase the flame propagating speed. Various numerical tests have also been carried out to determine the regimes of combustion at different stages of the flame propagation. These have been identified from the calculated results for the flow and flame characteristic parameters. It is found that the flame lies within the ‘thin reaction zone’ regime which supports the use of the laminar flamelet approach for modelling turbulent premixed flames. A submodel to calculate the model coefficient in the algebraic flame surface density model is implemented and examined. It is found that the LES predictions are slightly improved owing to the calculation of model coefficient by using submodel. Results are presented and discussed in this paper are for the flame structure, position, speed, generated pressure and the regimes of combustion during all stages of flame propagation from ignition to venting. The calculated results are validated against available experimental data.     

近贫燃极限甲烷/空气火焰的层流燃烧速度研究

利用微重力条件下向外传播的球形火焰,对贫燃极限附近甲烷/空气预混火焰的层流燃烧速度进行了测量,得到当量比从0.512(本文微重力实验中测定的可燃极限)到0.601范围内的零拉伸层流燃烧速度,并与前人实验数据和使用3种化学反应动力学模型的计算结果进行了比较.本文实验结果与已有的微重力实验数据非常接近,而其他研究者在常重力...     

A numerical study on extinction behaviour of laminar micro-diffusion flames

We conducted a numerical study on the fluid dynamic, thermal and chemical structures of laminar methane–air micro flames established under quiescent atmospheric conditions. The micro flame is defined as a flame on the order of one millimetre or less established at the exit of a vertically-aligned straight tube. The numerical model consists of convective–diffusive heat and mass transport with a one-step, irreversible, exothermic reaction with selected kinetics constants validated for near-extinction analyses. Calculations conducted under the burner rim temperature 300 K and the adiabatic burner wall showed that there is the minimum burner diameter for the micro flame to exist. The Damköhler number (the ratio of the diffusive transport time to the chemical time) was used to explain why a flame with a height of less than a few hundred microns is not able to exist under the adiabatic burner wall condition. We also conducted scaling analysis to explain the difference in extinction characteristics caused by different burner wall conditions. This study also discussed the difference in governing mechanisms between micro flames and microgravity flames, both of which exhibit similar spherical flame shape.     

Effect of ignition energy on the uncertainty in the determination of laminar flame speed using outwardly propagating spherical flames

The initial propagation processes of expanding spherical flames of CH₄/N₂/O₂/He mixtures at different ignition energies were investigated experimentally and numerically to reduce the effect of ignition energy on the accurate determination of laminar flame speeds. The experiments were conducted in a constant-volume combustion bomb at initial pressures of 0.07???0.7?MPa, initial temperatures of 298???398?K, and equivalence ratios of 0.9???1.3 with various Lewis numbers. The A-SURF program was employed to simulate the corresponding flame propagation processes. The results show that elevating the ignition energy increases the initial flame propagation speed and expands the range of flame trajectory which is affected by ignition energy, but the increase rates of the speed and range decrease with the ignition energy. Based on the trend of the minimum flame propagation speed during the initial period with the ignition energy, the minimum reliable ignition energy (MRIE) is derived by considering the initial flame propagation speed and energy conservation. It is observed that MRIE first decreases and then increases with the increasing equivalence ratio and monotonously decreases with increasing initial pressure and temperature. As the Lewis number rises, MRIE increases. The results also suggest that during the data processing of the spherical flame experiment, the accuracy of determination of laminar flame speeds can be enhanced when taking the flame radius influenced by MRIE as the lower limit of the flame radius range. Then the flame radius influenced by MRIE was defined as RFR. It can also be found that there exist nonlinear relationships between RFR and the equivalence ratio and Lewis number, and the RFR decreases with increasing initial pressure and temperature.     

Flame balls dynamics in divergent channel

A three-dimensional reaction-diffusion model for lean low-Lewis-number premixed flames with radiative heat losses propagating in divergent channel is studied numerically. Effects of inlet gas velocity and heat-loss intensity on flame structure at low Lewis numbers are investigated. It is found that continuous flame front exists at small heat losses and the separate flame balls settled within restricted domain inside the divergent channel at large heat losses. It is shown that the time averaged flame balls coordinate may be considered as important characteristic analogous to coordinate of continuous flame stabilized in divergent channel.     

Lift-off characteristics of triple flame with concentration gradient

The concentration gradient and uniform mean velocity of a triple flame in a mixing layer were studied using a multi-slot burner, which can stabilize the lift-off flame especially at a very small concentration gradient. Flame stabilization conditions were examined, and the lift-off heights of the triple flame were measured for methane and propane flames. A hot-wire anemometer was used to measure the velocity distributions. Mass spectroscopy (for methane) and Rayleigh scattering (for propane) were used to measure the concentration gradients. OH radical distribution was measured by laser-induced fluorescence (LIF), and in-stream velocity variation was measured with particle-image velocimetry (PIV). Maximum in-stream temperatures were measured using the coherent anti-Stokes Raman scattering (CARS) technique. Lift-off heights of triple flames have minimum values during the increase of concentration gradient, and the propagation velocity of triple flames reaches its maximum at a critical concentration gradient. This is caused by three factors: velocity distribution upstream, flammable limit of premixed gas, and reaction of diffusion flame. The critical concentration gradient, which maximizes the propagation velocity is suggested as a new criterion of transition from a premixed flame to a triple flame.