Large grain boundary area superconductors

For many applications of polycrystalline high-T _c superconductors the small critical currents of the grain boundaries pose a severe problem. To solve this problem, we derive novel designs for the microstructure of coated conductors. Received 25 February 2002 Published online 6 June 2002     

Magnetic behavior and role of the antiphase boundaries in Fe3O4 epitaxial films sputtered on MgO (001)

Magnetite Fe₃O₄ films were grown on single crystal MgO (001) substrates using facing target sputtering technique. Conversion Electron M?ssbauer Spectroscopy and magneto optical polar Kerr spectra have confirmed the stoichiometric repartition of Fe cations corresponding to the inverse spinel structure and the electronic structure characteristic of bulk Fe₃O₄. Hysteresis loops carried out at room temperature show that, in a 1 T applied magnetic field, only 60% of the saturation magnetization is detected. This behavior is discussed in correlation to the antiphase boundaries (APBs) observed by electron microscopy. Magnetic force microscopy studies show that magnetic domains are larger than the mean distance between APBs. Received 2 July 2001     

Isotope effect for transport and magnetic properties of La 0.35 Pr 0.35 Ca 0.3 MnO 3 thin films

The effect of ¹⁶ O → ¹⁸ O isotope substitution on electrical resistivity, magnetoresistance, and ac magnetic susceptibility was studied for La_0.35Pr_0.35Ca_0.3MnO₃ epitaxial thin films deposited onto LaAlO₃ and SrTiO₃ substrates. For the films on LaAlO₃, the isotope substitution resulted in the reversible transition from a metal-like to insulating state. The applied magnetic field ( H ≥ 2 T) transformed the sample with ¹⁸O back to the metallic state. The films on SrTiO₃ remained metallic at low temperatures for both ¹⁶O and ¹⁸O, but the shift of the resistivity peak corresponding to onset of metallic state exceeded 63 K after ¹⁶ O → ¹⁸ O substitution. The temperature dependence of both resistivity and magnetic susceptibility was characterized by hysteresis, especially pronounced in the case of the films on LaAlO₃. Such a behavior gives certain indications of the phase separation characteristic of interplay between ferromagnetism and charge ordering. Received 11 February 2000 and Received in final form 13 September 2000     

Damage processes in Fe 3 O 4 magnetic insulator irradiated by swift heavy ions. Experimental results and modelisation

The behavior of the magnetic properties of magnetite Fe₃O₄ irradiated by swift heavy ions is investigated by magnetization measurements. Although there is no induced structural phase transformation, both coercive field and saturation magnetization are sensitive to ion irradiation and exhibit different behaviors depending on the ion fluence range. In the low fluence regime, the coercive field increases, which is evidence for a strong pinning of magnetic domain boundaries by the induced defects. The magnetization shows a decrease in the saturation value and tends to reorient perpendicularly to the ion track axis. At high fluence, the initial magnetic properties of the sample are nearly restored. The changes in the magnitude and the direction of magnetization are interpreted by magnetostrictive effects related to the stress induced by irradiation. A phenomenological model is applied to reproduce the fluence evolution of the saturation magnetization, assuming relaxation of the stress induced around the core of defects of the tracks by overlapping effects at high fluence. The results are compared to those obtained in the case of yttrium iron garnet Y₃Fe₅O₁₂. Received 18 April 2001 and Received in final form 24 July 2001     

Magnetoresistance of magnetite thin films grown by pulsed laser deposition on GaAs(1 0 0) and Al2O3(0 0 0 1)

Magnetotransport properties of magnetite thin films deposited on gallium arsenide and sapphire substrates at growth temperatures between 473 and 673 K are presented. The films were grown by UV pulsed laser ablation in reactive atmospheres of O₂ and Ar, at working pressure of 8 × 10⁻² Pa. Film stoichiometry was determined in the range from Fe_2.95O₄ to Fe_2.97O₄. Randomly oriented polycrystalline thin films were grown on GaAs(1 0 0) while for the Al₂O₃(0 0 0 1) substrates the films developed a (1 1 1) preferred orientation. Interfacial Fe³⁺ diffusion was found for both substrates affecting the magnetic behaviour. The temperature dependence of the resistance and magnetoresistance of the films were measured for fields up to 6 T. Negative magnetoresistance values of ∼5% at room temperature and ∼10% at 90 K were obtained for the as-deposited magnetite films either on GaAs(1 0 0) or Al₂O₃(0 0 0 1).     

Exchange coupling in ultrathin epitaxial yttrium iron garnet films

Magnetic exchange coupling has been observed for ultrathin films of yttrium iron garnet (Y₃Fe₅O₁₂ or YIG). Single-crystalline YIG films were prepared on yttrium aluminium garnet (Y₃Al₅O₁₂ or YAG) substrates by pulsed laser deposition. (111) and (110) oriented substrates were used. Film thicknesses were varied from 180 ? to 4600 ?. Epitaxial growth of YIG on YAG was obtained in spite of the lattice mismatch of 3%. Magnetic hysteresis loops recorded for ultrathin YIG films have a “bee-waist” shape and show a coupling between two different magnetic phases. The first phase is magnetically soft YIG. A composition study by secondary ion mass spectroscopy shows the second phase to be Y₃Fe_5-xAl_xO₁₂ due to the interdiffusion of Fe and Al at the film/substrate interface. This compound is known to be magnetically harder and to have weaker magnetization than YIG. The coupling of the two phases leads to a hysteresis loop displacement at low temperatures. This displacement varies differently with film thickness for two substrate orientations. Assuming an interfacial coupling, the maximal interaction energy is estimated to be about 0.17 erg/cm² at 5 K for (111) oriented sample. Received 3 June 2002 / Received in final form 7 October 2002 Published online 27 January 2003 RID="a" ID="a"Presently at LPM, Université H. Poincaré, BP 239, 54506 Vandœuvre-lès-Nancy e-mail: popova@lpm.u-nancy.fr     

Magnetic interaction in Mg, Ti, Nb doped manganites

An effect of Mn substitution with Me=Mg²⁺, Ti⁴⁺, Nb⁵⁺ in manganites has been investigated by preparing La_0.7Sr_0.3(Mn_1-xMe_x)O₃ and La_1-xSr_x(Mn_{1 - x/2}Nb_x/2)O₃ series. It was established that substitution of manganese with magnesium up to x = 0.16 leads to a collapse of a long-range ferromagnetic order whereas La_0.7Sr_0.3(Mn ^{3 +} _0.85Nb ^{5 +} _0.15)O₃ is ferromagnet with T _C = 123 K and exhibits a large magnetoresistance below Curie point despite an absence of four-valent manganese. Hypothetical magnetic phase diagrams are constructed for La_0.7Sr_0.3(Mn_1-xMe_x)O₃ and La_1-xSr_x(Mn_{1 - x/2}Nb_x/2)O₃. Our results show that Mn³⁺-O-Mn³⁺ exchange interaction is ferromagnetic in the orbitally disordered manganites as well as an increase of Mn⁴⁺ content above 50% from a total amount of manganese ions leads to formation of a spin glass state due to a competition between antiferromagnetic Mn⁴⁺-O-Mn⁴⁺ and ferromagnetic Mn³⁺-O-Mn⁴⁺(Mn³⁺) superexchange interactions. Received 24 January 2002 Published online 9 July 2002     

Preparation of ferromagnetic semiconducting HgCr2Se4 thin films by molecular-beam deposition

Summary Polycrystalline thin films of the ferromagnetic semiconductor HgCr₂Se₄ have been prepared for the first time on insulating MgAl₂O₄ single-crystal substrates by molecular-beam deposition and subsequent annealing with HgSe. The optimum conditions for preparing single-phase thin films of HgCr₂Se₄ were obtained. The magnetoresistance and Hall effects of these films were measured from 77 to 295 K in magnetic fields up to 1.19·10⁶ A/m. It becomes evident that these electrical properties of the films are affected by the interdiffusion layers in the films near the substrates or the magnetically disordered layers such as amorphous or grain boundaries in the films. Paper presented at the ?V International Conference on Ternary and Multinary Compounds?, held in Cagliari, September 14–16, 1982.     

Effect of grain boundary on resistive magnetodielectric property of polycrystalline <Emphasis Type="Italic">γ</Emphasis>-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>

We have investigated the role of the grain boundary on the resistive magnetodielectric property of polycrystalline γ-Fe₂O₃ through impedance spectroscopy measurements. Depending on the sample preparation temperature, the dielectric constant of γ-Fe₂O₃ is significantly different especially at low frequencies (<10⁴ Hz) and high temperatures (>200 K). The value of the magnetodielectric effect at a specific frequency and the resonance frequency for the maximized magnetodielectric effect are different, although polycrystalline γ-Fe₂O₃ samples show a quite similar magnetoresistance. Through the experimentally obtained resistance ratio between the grain and the grain boundary, we can reproduce the magnetodielectric curves based on the Maxwell–Wagner model and the measured magnetoresistance.     

Magnetic relaxation in spinel Mo-ferrite and Ti substituted Mo-ferrite

A compensation temperature of 138 K was observed in the temperature-dependent magnetization curves of MoFe₂O₄. Relatively slow magnetization relaxation characterized the transitions between different spin states (compensated and uncompensated). Large magnetic after effect was found in time-dependent magnetization curves after heating or cooling from different characteristic temperatures for different spin states. The magnetic relaxation was nearly independent on magnetic field, supporting the presence of spin states and no involvement of domain structure. For the Ti substituted Mo_0.6Ti_0.4Fe₂O₄ sample, there were a compensation at ∼ 100 K and a maximum of magnetization at ∼ 175 K. Similar results of anomalous magnetic relaxation was observed in Ti substituted Mo-ferrite (Mo_0.6Ti_0.4Fe₂O₄). If the Mo_0.6Ti_0.4Fe₂O₄ sample was heated from 100 K to 235 K, the time-dependent magnetization curve could be considered as a combination of two magnetic relaxation processes. However, if the sample was heated from 100 K to 295 K, the time- dependent magnetization curve became complex. Received 30 October 2001 and Received in final form 21 January 2002     

Room-temperature magnetoresistance effects of Ag-added Fe3O4 films with single-domain grains

Polycrystalline Ag_x(Fe₃O₄)_1−x films (x=0, 0.1, 0.2 and 0.3) have been prepared by the sol-gel method in combination of the spin-coating technique with a precursor solution containing polyvinyl alcohol (PVA) on fused quartz substrates. XRD analysis and SEM images indicate that the Fe₃O₄ grains are nearly spherical single-domain particles. The coercivities of the films are about 290 Oe for x=0.1 and 360 Oe for x=0.3, respectively, which are nearly the same as the magnetocrystalline anisotropic effective field H_K of Fe₃O₄. At 300 K, the x=0.1 film has a maximal magnetoresistance of −8.7% at a magnetic field of 50 kOe and −3.5% at 8.8 kOe, while the pure Fe₃O₄ film is only −2.2% at 8.8 kOe. This enhancement of the MR can be attributed to the contribution from the spin-dependent scattering at the Ag-Fe₃O₄ interfaces as well as the spin-polarized tunneling at boundaries of Fe₃O₄ grains of the spin-polarized electrons. In addition, different MR behaviors for Ag-added Fe₃O₄ bulk polycrystalline samples and polycrystalline films are discussed.     

Preparation, magnetoresistance and magnetocaloric effect of two-layered perovskite La 2.5- x K 0.5+ x Mn 2 O 7+δ

Polycrystalline two-layered perovskite La_2.5-xK_0.5+xMn₂O _{7 + δ} (0 < x < 0.5) samples have been prepared by a modified sol-gel method and their magnetoresistance and magnetocaloric effects have been studied. A large deviation between the metal-insulator (MI) transition temperature (T _ρ ) and the magnetic transition temperature (T_C) is observed. Large magnetoresistance (MR) effects with Δρ/ρ of ∼40% at 12 kOe are obtained in wide temperature ranges. The maximum of the magnetic entropy change peaks at its Curie temperature (T_C), far above its MI transition temperature (T _ρ ). The large magnetic entropy change (∼1.4 J/kg.K) is obtained in the sample La_2.5-xK_0.5+xMn₂O _{7 + δ} (x = 0.35) upon 10 kOe applied magnetic field. Received 2 May 2002 / Received in final form 1st October 2002 Published online 19 December 2002 RID="a" ID="a"e-mail: wzhong@ufp.nju.edu.cn     

Evidence of local structural transition during oxidation process of RBCO epitaxial films using time resolved reflexafs measurements

We report results of a time resolved X-ray Absorption Spectroscopy (XAS) experiment on the oxidation process of epitaxial Y₁(Nd_0.05Ba_1.95)Cu₃O_x superconducting thin films. For the first time Cu K-edge XAS technique has been used to explore local structural changes around the Cu ions during the oxidation process of a high critical temperature superconducting film. The results show that during the oxygenation of a tetragonal Y₁(Nd_0.05Ba_1.95)Cu₃O_x additional local transitions appear in the orthorhombic I phase, which are not linked to long range order transformations as shown by in situ X-ray diffraction experiment. New questions concerning the dynamic microscopic process leading to the oxygenation and eventually to superconductivity of the complex R_1+xBa_2-xCu₃O_x (R = Y or rare earth) compounds arose from these results. Received 21 December 2001 Published online 25 June 2002     

Pseudo-gap and possible Spin-Peierls transition in the vanadium oxide VOSb 2 O 4

We report on the magnetic susceptibility and electron spin resonance measurements on polycrystalline samples of the vanadium oxide VOSb₂O₄, a quasi-one-dimensional S = 1/2 Heisenberg system. The susceptibility vanishes at zero temperature, but there is no cusp at the onset of the susceptibility drop, and the ESR linewidth exhibits an increase characteristic of a phase transition at a much lower temperature. We show that this behaviour is consistent with the formation of a pseudo-gap in a spin-Peierls system in the adiabatic limit. Received 7 February 2001 and Received in final form 24 April 2001     

Magnetic oscillations in the 2D network of compensated coupled orbits of the organic metal (BEDT-TTF) 8 Hg 4 Cl 12 (C 6 H 5 Br) 2

Interlayer magnetoresistance and magnetisation of the quasi-two dimensional organic metal (BEDT-TTF)₈Hg₄Cl₁₂(C₆H₅Br)₂ have been investigated in pulsed magnetic fields extending up to 60 T and 33 T, respectively. About fifteen fundamental frequencies, composed of linear combinations of only three basic frequencies, are observed in the oscillatory spectra of the magnetoresistance. The dependencies of the oscillation amplitude on the temperature and on the magnitude and orientation of the magnetic field are analyzed in the framework of the conventional two-dimensional Lifshitz-Kosevitch (LK) model. This model is implemented by damping factors which accounts for the magnetic breakthrough occurring between electron and hole orbits yielding conventional Shubnikov-de Haas closed orbits (model of Falicov and Stachowiak) and quantum interferometers. In particular, a quantum interferometer enclosing an area equal to the first Brillouin zone area is evidenced. The LK model consistently accounts for the temperature and magnetic field dependence of the oscillation amplitude of this interferometer. On the contrary, although this model formally accounts for almost all of the observed oscillatory components, it fails to give consistent quantitative data in most other cases. Received 4 September 2002 / Received in final form 14 November 2002 Published online 27 January 2003 RID="a" ID="a"e-mail: audouard@insa-tlse.fr RID="b" ID="b"UMR 5830: Unité Mixte de Recherche CNRS - Université Paul Sabatier - INSA de Toulouse RID="c" ID="c"UMS 5642: Unité Mixte de Service CNRS - Université Paul Sabatier - INSA de Toulouse     

Structural features of the La-Sr-Fe-Co-O system

A structural study has been performed on the La_0.8Sr_0.2Fe_xCo_1-xO₃ (x = 0.025 to 0.3) system displaying large magnetoresistance (MR) at room temperature. A detailed analysis of the crystal structure and microstructure was done by X-ray diffraction (XRD), transmission and scanning electron microscopy (TEM and SEM). The atomic resolution TEM images and the appearing superreflections in the corresponding SAED patterns revealed that a superstructure is formed due to the presence of iron. The correlation between the ordered microstructure and the observed large MR ratio is discussed. ⁵⁷Fe M?ssbauer spectroscopy was utilized to gain information on the valence state of iron in the sample with x = 0.3. The lattice parameters of Fe- doped La_0.8Sr_0.2Fe_xCo_1-xO₃ compounds were found to increase monotonously with increasing Fe content. The valence state of iron was found to be Fe³⁺. Received 22 January 2001     

Enhanced conductivity in ionic conductor-insulator composites: numerical models in two and three dimensions

We describe a two-dimensional (2D) and a three-dimensional (3D) percolation model for ionic conductor-insulator composites such as copper(I) bromide-titanium dioxide (CuBr-TiO₂) or lithium iodide-alumina (LiI-Al₂O₃). These composites present an enhanced conductivity closely related to the insulator concentration. This effect is explained by the formation of highly conducting space charge regions near the phase boundaries which are represented by good conductor bonds. Our numerical model takes into account grain size and correlation effects. The dimension has a leading role for the conduction properties. In the 2D case, the good conductor bonds do not percolate, whatever the insulator concentration, and the maximum conductivity of the composite samples is of the same order as that of the ionic conductor grains. The behavior of the system is very different in the 3D case where, for a large domain of composition, the good conductors percolate through the regions between the conductor grains. For the CuBr-TiO₂ composites the conductivity versus composition curve is bell-shaped. Conversely, in the LiI-Al₂O₃ system, a linear relation between the conductivity and the insulator volume fraction is obtained in the experiments. Our model gives a plausible interpretation of the conductivity in both systems. Received 10 April 2001     

Growth of InN films on spinel substrates by pulsed laser deposition

We have grown InN films on MgAl₂O₄(111) substrates with atomically flat surfaces using pulsed laser deposition (PLD) and compared their structural properties with those grown on (Mn,Zn)Fe₂O₄(111) substrates. It has been revealed that InN(0001) films grow on MgAl₂O₄(111) with an in‐plane epitaxial relationship of InN[1 00] // MgAl₂O₄[1 0], achieving a lattice mismatch minimum. The InN films exhibited a clear sixfold rotational symmetry, without 30° rotational domains and with a full width at half maximum value of the InN 0002 rocking curve being 17.5 arcmin. Comparison between InN films grown on MgAl₂O₄ and those on (Mn,Zn)Fe₂O₄ led us to conclude that suppression of the interfacial reactions between the InN films and the substrate is inherently important to obtain high quality InN on substrates with a spinel structure. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A spectroscopic investigation of Y 3 Al 5 O 12 :Pr 3 + in translucent ceramic form: Crystal field analysis assisted by configuration-interaction

This paper presents an investigation of Pr³⁺ doped in the D₂ site of Y₃Al₅O₁₂ (YAG), for the first time on a translucent ceramic sample free of spurious phases, impurity or pair sites. The optical study is carried out by optical absorption, excitation, and emission by selective excitation into ¹D₂ and ³P₀, at different temperatures between 20 K and 60 K, in the 4 300-23 000 cm^-1 range. A detailed account of the line assignments is given. 67 over 91 levels of the 4f² configuration are determined. Several crystal field calculations within the ground configuration 4f² and the larger matrix 4f^2+4f6p are carried out. The energy level fit is slightly improved by configuration interaction. The ³P₂ and ¹I₆ levels are strongly mixed together by the large 6th order crystal field parameters. In sintered samples with different Pr³⁺ concentrations, satellite lines with intensities increasing quadratically with the concentration are observed. A few weak lines forbidden in D₂ site symmetry are observed. Received 9 November 2001 and Received in final form 8 February 2002     

Enhanced magnetoresistance effects in bulk polycrystalline Ag-added magnetite

A series of bulk polycrystalline Ag-added Fe₃O₄ with a nominal composition, (Fe₃O₄)_1−xAg_x (x is molar fraction) with x=0, 0.1, 0.2, 0.3, 0.4, and 0.5 have been prepared by conventional solid-state reaction. X-ray diffraction patterns show that the pure Fe₃O₄ sample (x=0) has a single-phase inverse spinel structure, while the Ag-added samples are two-phase composites consisting of a ferrimagnetic Fe₃O₄ phase and a non-magnetic metal Ag phase. The bright-field transmission electron microscopy images exhibit that the samples are typical granular solids with a porosity of about 22%. The addition of Ag slightly increases the average grain size of the Fe₃O₄ phase and significantly enhances the MR effect of bulk polycrystalline Fe₃O₄ samples. Of all the samples the x=0.3 sample has a maximal MR of −5.1% at 300 K in a magnetic field of 1 T, and −6.8% in 5 T, which are approximately three times greater than the corresponding MR values (−1.8% at 1 T and −2.4% at 5 T) of the Fe₃O₄ sample. This enhancement of the MR can be attributed to the combination effect from the spin-dependent scattering at the interfaces between the Fe₃O₄ grains and the Ag granules and the spin-polarized tunneling at grain boundaries of Fe₃O₄ phase of the spin-polarized electrons.