Generalized Theory for the Simultaneous Measurement of Particle Size and Velocity using laser doppler and laser two-focus methods

Essentially the laser two-focus (L2F) and laser Doppler anemometer (LDA) are time-of-flight anemometers. The velocity of particles in the micrometre range is determined within the limits of an optically fixed measurement distance. For this only one optoelectronic receiver for the detection of the scattered light is required [1, 2]. With an arrangement of two receiving optics, positioned under an off-axis angle φ and an elevation angle ± ψ to the optical axis of the measurement system, a resolution of three-dimensional structures can be achieved and with regard to spherical particles it is possible to determine the dimensions by means of the temporal or phase shift of the signals in the receiving optics. A particle size-dependent distance inside the measurement volume can be fixed, which has to be passed in order to change the signal from one receiving optics to the other. An LDA with an arrangement of two receiving optics for particle sizing is known as a phase Doppler anemometer (PDA); an L2F designed with two receiving optics can be termed a pulse-displacement two-focus anemometer (P2F). The physical analysis of the two methods with respect to a temporal signal displacement in the receivers yielded new results.     

Estimates of the albedo of powderlike surfaces in the geometrical optics approximation

Results of computer simulation of light scattering by powderlike media composed of large semitransparent particles of different shapes are presented. The geometrical optics approach is used. The cases of particles of spherical, cubic, and random shapes are considered. The one-dimensional geometrical optics model of light scattering by powderlike media, which finds application in investigations of planetary surfaces, meteorites, and lunar samples, is briefly described. The numerical simulation allowed us to estimate the error of this model, which turned out to be within the limits of several percent. The albedo calculated by using the one-dimensional model is shown to be closest to the “three-dimensional” reflectance of the surfaces at a phase angle of about 60°. This albedo also approximates fairly well the integrated reflectance, which in laboratory measurements is determined with the help of an integrating sphere.     

Optimization of optical parameters for particle sizing in multiphase flows

Optimization of laser light scatter detection technique based on the geometrical optics method for measuring the size, velocity and refractive index of spherical particles was performed. A new optical orientation for extended phase-Doppler anemometry (EPDA) had been developed to improve the accuracy of particle material recognition in multiphase flow. The effects of both the intensity and phase factor of the reflected and refracted light were examined. The inverse sign of the phase factors from the refracted light and reflected light resulted in a (2π–φ) effect on phase determination. This was used for minimizing and validating the errors in the refractive index measurements of large particles. Furthermore, optimization results were compared with the results of simulation based on the generalized Lorenz–Mie theory (GLMT). A newly developed signal validation scheme was also described in detail. The scheme was used to reject the inaccurate data in order to further improve the accuracy of the recognition.     

Several possibilities for adjusting the profile of the parabolic surface of X-Ray mirrors and methods for their approximation

The possibility of developing elements for adaptive X-ray optics on the basis of modular components that consist of a base with a parabolic profile and active elements which are integrated inside is studied. The parameters of the active elements vary in size and are positioned along the surface of the modular components. Calculation data on variations in the profile of the surfaces of modular components, where piezoelectric elements are used as active elements, are presented. It is shown that the profile of the surface of modular elements can be flexibly adjusted based on the parameters of active elements and the electric-field voltage.     

Electromagnetic energy transport via linear chains of silver nanoparticles

We propose the idea of a subwavelength-sized light guide represented by a linear chain of spherical metal nanoparticles in which light is transmitted by electrodynamic interparticle coupling. The light-transport properties of this system are investigated by use of model calculations based on generalized Mie theory. Considering Ag particles of 50-nm diameter, we find optimum guiding conditions for an interparticle spacing of 25 nm, and a corresponding 1/e signal-damping length of 900 nm is evaluated. The proposed principle of optical energy transport may be useful for subwavelength transmission lines within integrated optics circuits and for near-field optical microscopy.     

Direct simulation Monte Carlo ray tracing model of light scattering by a class of real particles and comparison with PROGRA experimental results

The Direct Simulation Monte Carlo (DSMC) model is presented for three-dimensional single scattering of natural light by suspended, randomly oriented, optically homogeneous and isotropic, rounded and stochastically rough cubic particles. The modelled particles have large size parameter that allows geometric optics approximation to be used. The proposed computational model is simple and flexible. It is tested by comparison with known geometric optics solution for a perfect cube and Lorenz–Mie solution for a sphere, as extreme cases of the class of rounded cubes. Scattering and polarization properties of particles with various geometrical and optical characteristics are examined. The experimental study of real NaCl crystals with new Progra² instrument in microgravity conditions is conducted. The experimental and computed polarization and brightness phase curves are compared.     

In-fiber integrated optics: an emerging photonics integration technology [Invited]

In-fiber integrated optics is an attempt to use silica fiber as a substrate, integrating various optical paths or optical components into a single fiber, to build a functional optical device or component, and to realize a micro optical system, achieving various functions. In-fiber integrated optics is expected to be a new branch of photonics integration. This integration technique enables convenient light beams control and manipulation inside in one fiber. It also provides a research platform with micro and nano scale for interaction between light wave and microfluidic materials. In this review, we briefly summarize the main ideas and key technologies of the in-fiber integrated optics by series integration examples.     

Microfabricated surface ion trap on a high-finesse optical mirror

A novel approach to optics integration in ion traps is demonstrated based on a surface electrode ion trap that is microfabricated on top of a dielectric mirror. Additional optical losses due to fabrication are found to be as low as 80 ppm for light at 422 nm. The integrated mirror is used to demonstrate light collection from, and imaging of, a single Sr88(+) ion trapped 169±4 μm above the mirror.     

Geometrical optics approximation for light scattering by absorbing spherical particles

By means of geometrical optics, an approximation method is presented to compute the light scattering intensity of absorbing spherical particles illuminated by a plane wave. For absorbing particles, the effective refractive index and the effective refractive angle are related to the complex refractive index and incident angle. The formulas for calculation of the break of phases of reflection and refraction, which are different from the case of transparent particles, are exactly derived. Verification of the geometrical optics approximation (GOA) was performed by case studies and comparison of the present results with the Mie scattering. It is found that agreement between the GOA and the Mie theory is excellent in forward directions for weakly/moderately absorbing particles. Differently, for strongly absorbing particles, good agreement between the calculation methods is in the forward directions and large scattering angles. The agreement between the GOA and the Mie theory is better for larger particles.     

General design basis for a final optics assembly to decrease filamentary damage

The high-power laser beam in the final optics assembly of high-power laser facilities is often modulated by contamination particles, which may cause local high light intensity, thereby increasing the filamentary damage probability for optical components. To study the general design basis for a final optics assembly to decrease the risk of filamentary damage,different-sized contamination particles deposited on a component surface are simulated to modulate a 351-nm laser beam based on the optical transmission theory, and the corresponding simulation results are analyzed statistically in terms of the propagation characteristic and the light field intensity distribution of the modulated laser beam. The statistical results show that component thickness and distance between components can to some extent be optimized to reduce the appearance of local high light intensity, and the general design basis of component thickness and arrangement are given for different control levels of particle sizes. Moreover, the statistical results can also predict the laser beam quality approximately under the existing optics design and environmental cleanliness. The optimized design for final optics assembly based on environmental cleanliness level is useful to prolong the lifetime of optics and enhance the output power of high-power laser facilities.     

Diffractionless flow of light in all-optical microchips

We introduce the concept of a hybrid 2D-3D photonic band gap (PBG) heterostructure which enables both complete control of spontaneous emission of light from atoms and planar light-wave propagation in engineered wavelength-scale microcircuits. Using three-dimensional (3D) light localization, this heterostructure enables flow of light without diffraction through micron-scale air waveguide networks. Achieved by intercalating two-dimensional photonic crystal layers containing engineered defects into a 3D PBG material, this provides a general and versatile solution to the problem of "leaky modes" and diffractive losses in integrated optics.     

椭球模型下通过雾场的多重光散射谱

由于雾滴的非球形、多重散射特性以及几何光学效应,光通过实际雾场的散射问题成为一个研究难点. 建立了近于实际的椭球雾滴模型,考虑光的衍射、透射及反射特性后,利用辐射传播方程得到了在不同的雾滴大小分布 及不同的雾滴形状分布下通过雾场的多重散射光强公式.在两种特例下与已有的结果较为相符,说明了方法的可靠性. 计算表明:与随机取向的非球形颗粒场的散射谱呈圆形特征不同,通过椭球形雾滴场的散射谱呈椭圆特征, 不同方位角的散射光强角分布有所差异,雾滴的形状因子越接近于1,差异越小;与单散射不同, 散射谱中的条纹随光学厚度增大逐步消失;对于不同大小分布及不同形状分布的雾滴场, 在不同方位角及不同观察角的散射光强随光学厚度τ的增加总是先增大再减小,光强的极大值位置在τ = 1.0---3.0 范围内.计算同时还表明,由于多数情况下实际雾场的雾滴大小偏差较大, 因而通过雾场的散射谱将呈现以中央亮斑为中心向四周弥散的图样.     

Securing complex and multi-plane data in a lens-less digital holographic information system that uses position-phase-shifting geometry

A digital holographic information system can process complex three-dimensional (3-D) object information. We demonstrate a scheme for securing complex and 3-D information in the context of in-line digital holography. Double random phase encoding in the free-space propagation domain of light is used to secure the complex information. Encrypted in-line digital holograms are recorded using the position-phase-shifting method. The encrypted complex image at the CCD recording plane is retrieved from the real-valued digital holograms, and is used for decryption. The robustness of the method has also been studied for various securing keys used in the method against blind decryption. A layer-by-layer information retrieval from the encrypted digital hologram is also discussed. The method can also be used to secure digital complex information in a virtual optics modality using holographic principles.     

Polarization entangled state measurement on a chip

The emerging strategy to overcome the limitations of bulk quantum optics consists of taking advantage of the robustness and compactness achievable by integrated waveguide technology. Here we report the realization of a directional coupler, fabricated by femtosecond laser waveguide writing, acting as an integrated beam splitter able to support polarization-encoded qubits. This maskless and single step technique allows us to realize circular transverse waveguide profiles which are able to support the propagation of gaussian modes with any polarization state. Using this device, we demonstrate quantum interference with polarization-entangled states and singlet state projection.     

Diffraction and external reflection by dielectric faceted particles

The scattering of light by dielectric particles much larger than the wavelength of incident light is attributed to diffraction, external reflection and outgoing refracted waves. This paper focuses on diffraction and external reflection by faceted particles, which can be calculated semi-analytically based on physical optics. Three approximate methods; the surface-integral method (SIM), the volume-integral method (VIM), and the diffraction plus reflection pattern from ray optics (DPR) are compared. Four elements of the amplitude scattering matrix in the SIM and the VIM are presented in an explicit form. Of interest is that diffraction and external reflection are separable in the SIM, whereas they are combined in the VIM. A feature of zero forward reflection is noticed in the SIM. The applicability of the DPR method is restricted to particles with random orientations. In the manner of van de Hulst, we develop a new technique to compute the reflection pattern of randomly oriented convex particles using spheres with the same refractive index, resulting in an improvement in the precision of the reflection calculation in near-forward and near-backward directions. The accuracy of the aforementioned three methods is investigated by comparing their results with those from the discrete-dipole-approximation (DDA) method for hexagonal particles at the refractive index of 1.3+i1.0. For particles with fixed orientations, it is found that the SIM and the VIM are comparable in accuracy and applicable when the size parameter is on the order of 20. The ray-spreading effect on the phase function is evident from the results of various size parameters. For randomly oriented particles, the DPR is more efficient than the SIM and the VIM.     

Ultra-stable visible electroluminescence from crystalline-Si/O superlattice

We report an extremely stable electroluminescent device utilizing a crystalline Si/O superlattice, grown by molecular beam epitaxy with in situ oxygen exposure. Oxygen exposure is used to limit the growth of oxides to one or less than one monolayer in order to continue the silicon epitaxial growth. The visible EL, with electrons injected through a Schottky barrier into the c-Si/O superlattice, shows a spectrum with a peak at 2 eV. The EL device has been life-tested for over seven months without degradation. The robustness and stability of the c-Si/O superlattice would open a door for combining IC with integrated optics.     

激光尘埃粒子计数器微型光学传感器的研究

研制成功便携式激光尘埃粒子计数器的核心部件———微型光学传感器。该传感器采用直角散射光收集形式,以高功率半导体激光器作为光源,同时采用高性能的PIN型光电二极管作为光电探测器。散射光收集系统为单一大数值孔径的球面反射镜,其对粒子散射光的收集角范围从20°到160°。粒子散射光信号是脉冲信号,其频谱成份主要在高频段,所以在PIN型光电二极管后用一个带通式前置放大器来消除外界的低频噪声,根据米氏散射理论计算了该光学传感器的光散射响应特性,并用聚苯乙烯标准粒子实测了该光学传感器的性能。结果表明,该系统具有高的信噪比、计数效率和尺寸分辨本领。     

Pure Diffractive Multicolor Optical Fourier Transform System Design

１ＩｎｔｒｏｄｕｃｔｉｏｎＷｉｔｈｔｈｅｄｅｖｅｌｏｐｍｅｎｔｏｆｔｈｅｉｎｔｅｇｒａｔｅｄｏｐｔｉｃｓａｎｄｆａｂｒｉｃａｔｉｏｎｔｅｃｈｎｏｌｏｇｙｏｆｓｅｍｉｃｏｎｄｕｃｔｏｒ，ｏｐｔｉｃａｌＦｏｕｒｉｅｒｔｒａｎｓｆｏｒｍ（ＯＦＴ）ｉｓｂｅｃ...     

高功率激光传输过程中散射点对光束质量的影响

为了研究高功率激光传输过程中不透明颗粒引起的光束调制,通过分析这些不透明颗粒的形状和分布特点,建立了位置呈随机分布的高斯状散射点模型,从光束的衍射理论和干涉叠加理论出发,得到该模型下散射点对传输光束质量影响的解析式。数值分析了高斯状散射点的大小、密度、散射面积比及其传输距离对输出光束的近场分布、位相分布和光束透过率的影响,结果显示亚毫米量级散射点的衍射效应引起最大调制可达1．4,光学元件散射面积比小于0．003时才能满足元件透过率大于99．5％的需求。该结果可用于评价高功率激光装置光学元件的加工状况,并对光学元件加工要求和激光装置的洁净度要求有指导意义。     

Coherent fiber supercontinuum for biophotonics

Biophotonics and nonlinear fiber optics have traditionally been two independent fields. Since the discovery of fiber‐based supercontinuum generation in 1999, biophotonics applications employing incoherent light have experienced a large impact from nonlinear fiber optics, primarily because of the access to a wide range of wavelengths and a uniform spatial profile afforded by fiber supercontinuum. However, biophotonics applications employing coherent light have not benefited from the most well‐known techniques of supercontinuum generation for reasons such as poor coherence (or high noise), insufficient controllability, and inadequate portability. Fortunately, a few key techniques involving nonlinear fiber optics and femtosecond laser development have emerged to overcome these critical limitations. Despite their relative independence, these techniques are the focus of this review, because they can be integrated into a low‐cost portable biophotonics source platform. This platform can be shared across many different areas of research in biophotonics, enabling new applications such as point‐of‐care coherent optical biomedical imaging.