Temperature dependence of thermal properties of Ag<Subscript>8</Subscript>In<Subscript>14</Subscript>Sb<Subscript>55</Subscript>Te<Subscript>23</Subscript> phase-change memory materials

The dependence of thermal properties of Ag₈In₁₄Sb₅₅Te₂₃ phase-change memory materials in crystalline and amorphous states on temperature was measured and analyzed. The results show that in the crystalline state, the thermal properties monotonically decrease with the temperature and present obvious crystalline semiconductor characteristics. The heat capacity, thermal diffusivity, and thermal conductivity decrease from 0.35 J/g K, 1.85 mm²/s, and 4.0 W/m K at 300 K to 0.025 J/g K, 1.475 mm²/s, and 0.25 W/m K at 600 K, respectively. In the amorphous state, while the dependence of thermal properties on temperature does not present significant changes, the materials retain the glass-like thermal characteristics. Within the temperature range from 320 K to 440 K, the heat capacity fluctuates between 0.27 J/g K and 0.075 J/g K, the thermal diffusivity basically maintains at 0.525 mm²/s, and the thermal conductivity decreases from 1.02 W/m K at 320 K to 0.2 W/m K at 440 K. Whether in the crystalline or amorphous state, Ag₈In₁₄Sb₅₅Te₂₃ are more thermally active than Ge₂Sb₂Te₅, that is, the Ag₈In₁₄Sb₅₅Te₂₃ composites bear stronger thermal conduction and diffusion than the Ge₂Sb₂Te₅ phase-change memory materials.     

Coercivity of homogenized ensembles of anisotropic γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles

The influence of interaction between anisotropic γ-Fe₂O₃ nanoparticles on their coercive force H _c is studied. In samples where the degree of homogenization of anisotropic γ-Fe₂O₃ nanoparticles is high owing to mechanical, ultrasonic, and magnetic dispersion with subsequent filtering of resulting suspensions, H _c is almost independent of volume concentration η of the particles when η varies between 4 × 10⁻⁴ and 10⁻¹. In samples homogenized only mechanically, the H _c versus logη dependence is linear.     

Nernst effect of stripe ordering La<Subscript>1.8−x</Subscript>Eu<Subscript>0.2</Subscript>Sr<Subscript>x</Subscript>CuO<Subscript>4</Subscript>

We investigate the transport properties of La_1.8−xEu_0.2Sr_xCuO₄ (x = 0.04, 0.08, 0.125, 0.15, 0.2) with a special focus on the Nernst effect in the normal state. Various anomalous features are present in the data. For x = 0.125 and 0.15 a kink-like anomaly is present in the vicinity of the onset of charge stripe order in the LTT phase, suggestive of enhanced positive quasiparticle Nernst response in the stripe ordered phase. At higher temperature, all doping levels except x = 0.2 exhibit a further kink anomaly in the LTO phase which cannot unambiguously be related to stripe order. Moreover, a direct comparison between the Nernst coefficients of stripe ordering La_1.8−xEu_0.2Sr_xCuO₄ and superconducting La_2−xSr_xCuO₄ at the doping levels x = 0.125 and x = 0.15 reveals only weak differences. Our findings make high demands on any scenario interpreting the Nernst response in hole-doped cuprates.     

Influence of Zn/Co ratio on dielectric behavior of Na<Subscript>2</Subscript>Zn<Subscript>1 ‐ x</Subscript>Co<Subscript>x</Subscript>P<Subscript>2</Subscript>O<Subscript>7</Subscript> glasses

A series of zinc phosphate glass doped with cobalt Na₂Zn_(1???x)Co_xP₂O₇ (x = 0, 1, 2 and 5 mol%) was synthesized. These glasses were characterized by both infrared and large broadband dielectric spectroscopy. Infrared spectra indicate the increase of Zn/Co ratio creates defect in phosphate network due to the depolymeration of phosphate anions. The dc conductivity increases and activation energy decreases with the amount of cobalt ions in the glass network. The impedance measurements reveal that the total conductivity follows Jonscher’s power law. The dielectric constant and dielectric loss increased with the temperature and decreased with the frequency whatever the cobalt proportion.     

Theoretical study of the structure of lead zirconate–titanate PbZr<Subscript>0.6</Subscript>Ti<Subscript>0.4</Subscript>O<Subscript>3</Subscript>

A model of the structure of the piezoelectric ceramic lead zirconate–titanate PbZr_1–x Ti _x O₃ (PZT) is proposed. The model is based on ab initio calculations for possible local structures using the density functional theory (DFT) approach. A comparison of the calculated neutron diffraction data for local structures and the measured diffraction data obtained for actual powder samples shows there is a partially established long-range crystalline order in the material, in the sublattice of Zr and Ti cations.     

Mössbauer and magnetic studies of the phase state of SrFe<Subscript>12</Subscript>O<Subscript>19</Subscript>/La<Subscript>0.9</Subscript>Ca<Subscript>0.1</Subscript>MnO<Subscript>3</Subscript> composites

The formation of an intermediate phase in SrFe₁₂O₁₉/La_0.9Ca_0.1MnO₃ composites was demonstrated for the first time using only Mössbauer spectroscopy. The SrFe₁₂O₁₉/La_0.9Ca_0.1MnO₃ composite was prepared by the two-stage (sol–gel and hydrothermal) synthesis with varying initial conditions. The X-ray diffraction studies showed that the composite consisted of two phases: well-formed structures of manganite La_0.9Ca_0.1MnO₃ and hexagonal ferrite SrFe₁₂O₁₉. It was found that nanocrystalline La_0.9Ca_0.1MnO₃ particles with size d ? 150 nm formed in the composites at the surface of plate-like SrFe₁₂O₁₉ crystallites. The Mössbauer studies showed that the composite contained additional (intermediate) phase La_0.9Ca_0.1Mn(Fe)O₃ that formed at the interface between SrFe12O19 and La_0.9Ca_0.1MnO₃ phases. The intermediate phase concentration increased with the molar content of La_0.9Ca_0.1MnO₃; in this case, the fraction of the surface of SrFe₁₂O₁₉ crystallites coated with La_0.9Ca_0.1MnO₃ increased, which led to the increase in the total area of the interface surface and the intermediate phase concentration.     

Microwave characterization of Pb<Subscript>1−x</Subscript>Ca<Subscript>x</Subscript>Fe<Subscript>0.5</Subscript>Nb<Subscript>0.5</Subscript>O<Subscript>3</Subscript> multiferroics at X-band

The microwave characteristics of Pb_1?x Ca _x Fe_0.5Nb_0.5O₃ multiferroics (x = 0.0, 0.4, 0.45, 0.5, 0.55, 0.6), have been investigated as a function of frequency and substitution. The results depict ?13.99 dB reflection loss at 11.65 GHz in composition x = 0.6. Microwave absorption is enhanced with substitution of Ca²⁺ ions and undoped composition 0.0 behaves as electromagnetic shield. The model governing microwave absorption is discussed and different compositions for electromagnetic applications have been suggested.     

Reactions of initiation of the autoignition of H<Subscript>2</Subscript>–O<Subscript>2</Subscript> mixtures in shock waves

The initiation of the autoignition of hydrogen–oxygen–argon mixtures behind reflected shock waves is studied by absorption and emission spectrophotometry in the temperature range of 960 < T < 1670 K at pressures of ~0.1 MPa. Introduction of Mo(CO)₆ additive in an amount of ~80 ppm made it possible to study the effect of O atoms on the shortening of the ignition delay time of H₂–O₂–Ar mixtures. A kinetic modeling of our own and published experimental data at temperatures of 930 < T < 2500 K and pressures of 0.05 < P < 8.7 MPa enabled to establish how the initiation reactions influence the process of self-ignition and to evaluate the rate constant for one of the initiation reactions: k(H₂ + O₂ → 2OH) = (3 ± 1) × 10¹¹exp(–E _a/RT), cm³ mol^–1 s^–1, where E _a = (40 ± 2) kcal/mol.     

Influence of Morphological Defects on Thermophysical Properties of γ-Gd<Subscript>2</Subscript>S<Subscript>3</Subscript>

The temperature dependences of the heat capacity (C _p ) and the thermal conductivity (κ) in the temperature range from 300 to 773 K of polycrystalline gadolinium sulfide samples (γ-GdS _y ) with the deviation of the composition from the integer stoichiometric were studied. It was found that the thermal conductivity of gadolinium sulfides decreases monotonically and reaches 0.74 W/(m K) at T = 773 K for the composition y = 1.479, which is much lower than for the known single-crystal samples. The influence of morphological defects (boundaries of crystallites and dislocations) on the intensity of scattering of phonons is studied. It has been established that ceramic samples of gadolinium sulphides have a large heat capacity and a lower thermal conductivity, in comparison with monocrystalline samples of the same composition.     

μSR study of Eu<Subscript>0.8</Subscript>Ce<Subscript>0.2</Subscript>Mn<Subscript>2</Subscript>O<Subscript>5</Subscript> and EuMn<Subscript>2</Subscript>O<Subscript>5</Subscript> multiferroics

A comparative μSR study of ceramic samples of the EuMn₂O₅ and Eu_0.8Ce_0.2Mn₂O₅ multiferroics is performed in the temperature range from 15 to 300 K. It is found that the Ce doping of the EuMn₂O₅ sample slightly reduces the temperature of the magnetic phase transition from T _N = 45 K for the EuMn₂O₅ sample to T _N = 42.5 K for the Eu_0.8Ce_0.2Mn₂O₅ sample. Below the temperature T _N for both samples, there are two types of localization of a thermalized muon with different temperature dependences of the precession frequency of the magnetic moment of the muon in an internal magnetic field. The higher frequency in both samples refers to the initial antiferromagnetic matrix. The behavior of this frequency in Eu_0.8Ce_0.2Mn₂O₅ follows the Curie–Weiss law with the exponent β = 0.29 ± 0.02, which differs from the value β = 0.39 standard for 3D Heisenberg magnetics and is observed in EuMn₂O₅, because of the strong frustration of the doped sample. The temperature-independent low frequency is due to the presence of Mn³⁺–Mn⁴⁺ ferromagnetic pairs located along the b axis of the antiferromagnetic matrix and in the regions of phase separation, which contain such ion pairs and e _g electrons recharging them. In both samples, polarization losses are the same (about 20%) and are associated with the formation of Mn⁴⁺–Mn⁴⁺ + Mu complexes near Mn³⁺–Mn⁴⁺ ferromagnetic pairs. In the temperature interval from 25 to 45 K, the separation of the Eu_0.8Ce_0.2Mn₂O₅ structure into two fractions where the relaxation rates of polarization of muons differ by an order of magnitude is revealed. This effect is due to a change in the state of regions of phase separation (1D superlattices) at the indicated temperatures. Such effect in EuMn₂O₅ is significantly weaker.     

High-Temperature Heat Capacity of Zn<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript>–Cu<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript> Solid Solutions

Differential scanning calorimetry has been used to study the influence of temperature on the heat capacity of synthesized vanadates Zn₂V₂O₇, (Cu_0.56Zn_1.44)V₂O₇, and (Cu_1.0Zn_1.0)V₂O₇. It is found that dependences C_p = f(T) have extremes. The thermodynamic properties of Zn₂V₂O₇ have been determined.     

Magnetic and magnetoresistive properties of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–Sr<Subscript>2</Subscript>FeMoO<Subscript>6–δ</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoheterostructures

A method has been developed for fabricating nanoporous matrices based on anodic aluminum oxide for the deposition of ferromagnetic nanoparticles in them. The modes of deposition of strontium ferromolybdate thin films prepared by the ion-plasma method have been worked out, and the magnetic and magnetoresistive properties, structure, and composition of the films have been investigated. It has been revealed that the microstructure and properties of the strontium ferromolybdate films deposited by ionplasma sputtering depend on the deposition rate and the temperature of the substrate. Based on the measurement of the electrical resistivity of nanoheterostructures in a magnetic field, it has been found that the magnetoresistance reaches 14% at T = 15 K and B = 8 T, which is due to the manifestation of tunneling magnetoresistance.     

Optical investigations of the clathrate α-Eu<Subscript>8</Subscript>Ga<Subscript>16</Subscript>Ge<Subscript>30</Subscript>

We performed measurements of the optical reflectivity in the energy range 0.007–30 eV on the clathrate-VIII type compound α-Eu₈Ga_{16- x}Ge_{30 x} in order to investigate its electronic band structure. The very low charge carrier concentration as well as ferromagnetic ordering of the divalent Eu ions below 10.5 K characterize the spectra at photon energies below ≃0.4 eV in accordance with the results of band structure calculations. Disorder induced bound states have been identified to affect the optical conductivity at energies between 10 and 100 meV.     

Role of A-site deficiency in the magneto-transport properties of Pr<Subscript>0.7</Subscript>Sr<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript> relaxed films

The magneto-transport properties of thick relaxed A-site deficient films having the composition Pr Sr_0.3MnO₃ (P_□SMO with the □ symbol for the Pr vacancy) and Pr_0.7Sr MnO₃ (PS_□MO) are studied. A direct comparison with a Pr_0.7Sr_0.3MnO₃ (PSMO)completely relaxed film, deposited under the same growth conditions, shows a reduction of the in-plane parameter a₁₀₀ associated to an enhancement of the out-plane parameter. The strains (bulk strain ε_B and biaxial Jahn-Teller strain ε_J-T) do vary with the nature of the cationic vacancy. For example, an enhancement of ε_B of 9% in the PS_□MO film (Sr deficient) produces a decrease of T_C of 30 K, whereas the Pr deficient P_□SMO film exhibits a large reduction of both ε_B (-16%) and ε_J-T (divided by a factor of 5), which enhances T_C of 12 K, similarly to previous observations on bulk ceramics. With a reduced resistivity (ρ<0.02 Ω cm), the obtained Pr-deficient film, P_□SMO, exhibits the best magneto-transport properties with a decreasing magnetoresistance sensitivity at low field.     

Elastic properties of TeO<Subscript>2</Subscript>–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–Ag<Subscript>2</Subscript>O glasses

A series of glasses [(TeO₂) _x (B₂O₃)_1−x ]_1−y [Ag₂O] _y with x = 70 and y = 10, 15, 20, 25 and 30 mol% were synthesised by rapid quenching. Longitudinal and shear ultrasonic velocity were measured at room temperature and at 5 MHz frequency. Elastic properties, Poisson's ratio, microhardness, softening temperature and Debye temperature have been calculated from the measured density and ultrasonic velocity at room temperature. The experimental results indicate that the elastic constants depend upon the composition of the glasses and the role of the Ag₂O inside the glass network is discussed. Estimated parameters based on Makishima–Mackenzie theory and bond compression model were calculated in order to analyse the experimental elastic moduli. Comparison between the experimental elastic moduli data obtained in the study and the calculated theoretically by the mentioned above models has been discussed.     

Mechanism of the oxidation and combustion of normal paraffin hydrocarbons: Transition from C<Subscript>1</Subscript>–C<Subscript>6</Subscript> to C<Subscript>7</Subscript>H<Subscript>16</Subscript>

A previously proposed algorithm for constructing an optimal mechanism of the high- and low-temperature oxidation and combustion of normal paraffin hydrocarbons was used, which includes the major processes that determine the rate of reaction and the formation of the main intermediate and final products. The mechanism has the status of a nonempirical detailed mechanism, since all the constituent elementary reactions have a kinetic substantiation. The mechanism has two specific features: it included no reactions of so-called double addition of oxygen and no isomeric compounds and derivatives thereof as intermediate species. Realization of this algorithm leads to fairly compact models, a circumstance important for studies of chemical processes involving paraffin hydrocarbons C _n with large n. Previously, based on this algorithm, compact mechanisms of oxidation and combustion of propane, n-butane, n-pentane, and n-hexane were constructed. In this paper, we develop a nonempirical detailed mechanism of oxidation and combustion of n-heptane. The most important feature of the new mechanism is its ability to predict the staging of the process in the form of cool and blue flames at low autoignition temperatures. A comparison of the simulation results with the available experimental data is conducted.     

Influence of Matrix Nature on the Structural Characteristics of In<Subscript>2</Subscript>O<Subscript>3</Subscript>–CeO<Subscript>2</Subscript> and SnO<Subscript>2</Subscript>–CeO<Subscript>2</Subscript> Composites Fabricated by the Impregnation Method

The structural characteristics, valence states, and distribution of cerium ions between the components in In₂O₃–CeO₂ and SnO₂–CeO₂ nanocomposites fabricated using the impregnation method were studied. X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectroscopy (EDX) were used to show that, during impregnation, cerium ions are not included into In₂O₃ crystals and are disposed only on their surface in the form of nano-sized crystallites or amorphous clusters. On the other side, under the contact of CeO₂ clusters with a surface of SnO₂ matrix crystals, cerium ions penetrate into the surface layer of these crystals. In contrast to an In₂O₃–CeO₂ system, where the addition of CeO₂ does not affect the conduction activation energy, where cerium oxide is added to SnO₂, the observed increase in the resistance of a SnO₂–CeO₂ composite is accompanied by a sufficient increase in activation energy. These data and the XPS spectra confirm the modification of the surface layers of conductive SnO₂ crystals as, a result of the penetration of cerium ions into these layers.     

Orientation dependence of electrical properties of 0.96Na<Subscript>0.5</Subscript>Bi<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript>-0.04BaTiO<Subscript>3</Subscript> lead-free piezoelectric single crystal

In this paper, a single crystal of 0.96Na_0.5Bi_0.5TiO₃-0.04BaTiO₃ with dimensions of Φ 30×10 mm was grown by the top-seeded-solution growth method. X-ray powder diffraction results show that the as-grown crystal possesses the rhombohedral perovskite-type structure. The dielectric, piezoelectric and electrical conductivity properties were systematically investigated with 〈001〉, 〈110〉 and 〈111〉 oriented crystal samples. The room-temperature dielectric constants for the 〈001〉, 〈110〉 and 〈111〉 oriented crystal samples are found to be 650, 740 and 400 at 1 kHz. The (T _m, ε _m) values of the dielectric temperature spectra are almost independent of the crystal orientations; they are (306°C, 3718), (305°C, 3613) and (307°C, 3600) at 1 kHz for the 〈001〉, 〈110〉 and 〈111〉 oriented crystal. The optimum poling conditions were obtained by investigating the piezoelectric constants d ₃₃ as a function of poling temperature and poling electric field. For the 〈001〉 and 〈110〉 crystal samples, the maximum d ₃₃ values of 146 and 117 pC/N are obtained when a poling electric field of 3.5 kV/mm and a poling temperature of 80°C were applied during the poling process. The as-grown 0.96Na_0.5Bi_0.5TiO₃-0.04BaTiO₃ crystal possesses a relatively large dc electrical conductivity, especially at higher temperature, having a value of 1.98×10⁻¹¹ Ω⁻¹⋅m⁻¹ and 3.95×10⁻⁹ Ω⁻¹⋅m⁻¹ at 25°C and 150°C for the 〈001〉 oriented crystal sample.     

Photoluminescence of TlCu<Subscript>1−x</Subscript>GaSe<Subscript>2</Subscript> single crystals

The results of the study of photoluminescence and its excitation spectra in Tl _x Cu_1−x GaSe₂ single crystals are presented. The crystals under study are layered and characterized by anisotropic optical properties. In this respect, it is important to investigate optical properties of the crystals under study.