Novel 60 GHz RoF system with optical single sideband mm-wave signal generation and wavelength reuse for uplink connection

In order to improve RF frequency to achieve higher bandwidth and larger capacity, we propose a novel scheme to generate optical single sideband (SSB) millimeter-wave, in which frequency doubling of local radio frequency (RF) is obtained by using one integrated Mach–Zehnder modulator (MZM), and we theoretically investigate the generating principle of SSB. The optical SSB modulation scheme is employed to generate 60 GHz optical mm-wave and the 2.5 Gb/s baseband signal is simultaneously up-converted at the central station (CS) for downlink transmission, and the optical carrier is reused for uplink connection at the base station (BS). The full-duplex 2.5 Gb/s data are successfully transmitted over 40 km standard single-mode fiber (SMF-28) for both uplink connection and downlink connection with less than 2-dB power penalty. Results show the novel 60 GHz RoF system with optical SSB mm-wave signal generation using optical frequency doubling is feasible and we can obtain simple cost-efficient configuration and good performance over long-distance transmission.     

A full-duplex radio-over-fiber system using direct modulation laser to generate optical millimeter-wave and wavelength reuse for uplink connection

In this paper, we present a full-duplex radio-over-fiber system incorporating both optical millimeter-wave (mm-wave) generation and wavelength reuse for uplink connection. The optical double sidebands (DSB) signal is generated by using only one inexpensive broadband direct modulation laser (DML), to which a mixing RF signal is applied. An optical interleaver is then used to separate the first-order optical sidebands from the optical carrier of optical DSB signal. The separated first-order optical sidebands are beat to generate mm-wave signal that has double the frequency of the RF drive signal, while the separated optical carrier is reused as light source to remodulate uplink signal. Both detailed theoretical analysis and experiments to demonstrate the feasibility of the proposed system are presented. Experiment result shows that the bidirectional 2.5 Gb/s data can be successfully transmitted over 40 km standard single-mode fiber (SSMF) with less than 2 dB power penalty.     

Frequency sextupling technique using two cascaded dual-electrode Mach–Zehnder modulators interleaved with Gaussian optical band-pass filter

A frequency sextupling technique for the generation of millimeter-wave (mm-wave) is proposed and investigated. The proposed technique is comprised of two cascaded dual-electrode Mach–Zehnder modulators (MZMs), which are interleaved with Gaussian optical band-pass filter (GOBF). The first MZM, biased at minimum transmission, is only used for optical carrier suppression modulation, and the second MZM, biased at maximum transmission, is used for both even-order optical harmonic generation and data signal modulation. The GOBF between two MZMs is used to suppress the high-order optical harmonics beyond the first-order optical harmonics. On the basis of theoretical analysis and simulated demonstrations, it is concluded that with the use of an RF signal at 10 GHz, which carries the data signal and drives the MZMs, an mm-wave signal at 60 GHz can be obtained. The simulation results show that the proposed sextuple leads to a 7 dB improvement in receiver sensitivity in comparison with the modulation technique, i.e. using two cascaded dual-electrode MZMs without GOBF. Furthermore, the eye diagrams show that the quality of generated mm-wave signal is satisfactory. The proposed technique is verified by experiments.     

10 Gb/s optical carrier distributed network with W-band (0.1 THz) short-reach wireless communication system

Millimeter-wave (mm-wave) operated in W-band (75 GHz–0.11 THz) is of particular interests, since this frequency band can carry signals at much higher data rates. We demonstrate a 10 Gb/s optical carrier-distributed network with the wireless communication system. The mm-wave signal at carrier frequency of 0.1 THz is generated by a high speed near-ballistic uni-traveling carrier photodiode (NBUTC-PD) based transmitter (Tx), which is optically excited by optical short pulses. The optical pulse source is produced from a self-developed photonic mm-wave waveform generator (PMWG), which allows spectral line-by-line pulse shaping. Hence these optical pulses have high tolerance to fiber chromatic dispersion. The W-band 10 Gb/s wireless data is transmitted and received via a pair of horn antennas. The received 10 Gb/s data is envelope-detected and then used to drive an optical modulator at the remote antenna unit (RAU) to produce the upstream signal sending back to the central office (CO). 20 km single mode fiber (SMF) error free transmission is achieved. Analysis about the optimum repetition rate of the optical pulse source and the transmission performance of the upstream signal are also performed and discussed.     

一种改进的双边带调制产生光毫米波的方案

提出了应用于光纤无线通信系统中一种改进的双边带调制产生光毫米波方案。在中心站采用强度调制将射频信号调制到光载波上产生一个双边带信号,滤掉中心载波后,利用光交叉复用器把双边带信号的上下边带模分开,将数据速率为2.5Gbit/s的基带信号调制到下边带模后,再与未调信号耦合后产生光毫米波,然后通过单模光纤传输至基站,在基站经过光电转换后产生电毫米波信号。从理论上对该毫米波的色散特性进行了分析,发现毫米波的接收功率不会周期的衰减。同时通过实验研究表明,下行链路信号通过光纤能传输50km而不需要色散补偿,功率代价小于1dBm。因此,该方法产生的光毫米波能有效克服光纤色散引起的信号时延而导致的基带信号退化,适合于远距离传输。     

DSB optical mm-wave with signal only on optical carrier generated by embedded LiNbO3 Mach-Zehnder modulator

We have investigated the generation of the 40-GHz double-sideband optical millimeter (mm)-wave with signal carried only by its optical carrier via an embedded LiNbO₃ Mach-Zehnder modulator (LN-MZM). Since the optical carrier and its two first-order sidebands are dominant and their powers are well balanced, the first-order harmonic in the photocurrent gets maximal. As the optical mm-wave signal is transmitted along the fiber, there is no code outline distortion because the signal is only modulated on the optical carrier. Although the first-order harmonic shows the periodical fading effect when the optical mm-wave signal is transmitted along the fiber, its degradation on the radio-over-fiber link can be avoided by adjusting the position of the fading nodes via varying the main MZM bias voltage, and the signal still keeps much good eye diagram even after 50-km fiber transmission. The experimental results prove our theory.     

Optical millimeter-wave generation and transmission system for 1.25 Gbit/s downstream link using a gain switched laser

In this paper, we propose a novel and cost effective system for optical millimeter-wave (mm-wave) generation and transmission of downstream data based on a gain switched laser (GSL). The GSL produces an optical comb spectrum that can be appropriately filtered to generate two optical sidebands spaced by more than 4 times the repetition rate of the GSL. These sidebands are modulated by baseband data and then transmitted via optical fiber to the remote antenna unit (RAU). At the RAU, the two sidebands are heterodyned using a photodetector to generate the electrical modulated mm-wave signal, before demodulation using self mixing. We demonstrate the distribution of 1.25 Gbit/s data OOK modulated onto a 60 GHz carrier, similar to that used in the IEEE 802.15.3c draft standard, over fiber lengths up to 62 km.     

Generation of optical carrier suppression millimeter-wave signal using one dual-parallel MZM to overcome chromatic dispersion

In this paper, we have proposed a novel approach to generate optical carrier suppression (OCS) mm-wave with signal only carried by one first-order sideband using a dual-parallel MZM in radio-over-fiber (RoF) system, and the transmission performance was also investigated. As the optical mm-wave signal is transmitted along the fiber, there is no time shift of the data symbols resulting from the group velocity dispersion in the fiber because the signal is only modulated on one sideband. The simulation results showed that the eye diagram keeps open and clear even when the optical mm-wave signals are transmitted over 96-km and the power penalty is about 1-dB after fiber transmission distance of 60-km, which is quite consistent with our theoretical analysis. Furthermore, the proposed OCS optical mm-wave generation approach is also used in a full-duplex RoF link based on wavelength reuse at the base station for the uplink due to another pure sideband without carrying data. The bidirectional 2.5-Gbit/s data is successfully transmitted over 40-km standard single mode fiber with less than 0.5-dB power penalty in the simulation. Both the unidirectional RoF downlink and the full-duplex RoF system have good performance.     

The transmission performance degradation of the optical millimeter-wave signals by fiber chromatic dispersion

The influence of the fiber chromatic dispersion on double sideband (DSB), optical carrier suppression (OCS), and single sideband (SSB) optical mm-wave signals is investigated based on the Taylor expansion of the propagation constant and is verified by simulation. According to our theoretical results, the fading effect suppresses the signal power of the DSB optical mm-wave periodically in a cosine-like pattern, and it can be described by the zero-order Taylor expansion of the propagation constant. For the optical mm-wave with the signal modulated on two or more tones, the bit pulses of the mm-wave signal are distorted by the dispersion-inducing bit walk-off effect between tones, which is expressed by the first-order Taylor expansion of the propagation constant. Moreover, as the signal rate and the transmission distance are increased further, higher-order Taylor expansion of the propagation constant still degrades the optical mm-wave signal even if both the fading effect and the bit walk-off effect are eliminated completely. The distortion of the signal pulses of SSB optical mm-wave is derived based on the second-order Taylor expansion of the propagation constant. This degradation is verified by the simulation with the eye diagram evolution of the SSB optical mm-wave signal.     

A full-duplex radio-over-fiber link with 12-tupling mm-wave generation and wavelength reuse for upstream signal

A full-duplex radio-over-fiber (RoF) link with a novel scheme to generate 60 GHz mm-waves from a 5 GHz RF signal source is investigated. In the RoF downlink, the required frequency of the RF oscillator is reduced greatly. Since the optical carrier is not modulated by downstream data, part of it is reused to carry upstream data and the upstream data is transmitted to the central station using optical single-sideband modulation. In this way, a single wavelength is used for both downstream and upstream transmissions. Based on this scheme, a full-duplex RoF link is built and its transmission performance is analyzed. Theoretical analysis and numerical simulation show that the downstream signal cannot only eliminate code form distortion caused by time shift of the code edges, but also reduce the influence of the fading effect as the 60 GHz DSB optical mm-wave signal is transmitted along the fiber, and the upstream signal is immune to both fading effect and time shift of the code edges.     

Generation and transmission of the double-sideband optical millimeter-wave with signal carried only by optical carrier

In this paper, we have proposed a new scheme to generate double-sideband (DSB) optical millimeter-wave (mm-wave) with signal carried only by optical carrier, and its transmission performance is investigated. The theoretical and numerical results show that the DSB optical mm-wave signal generated by our scheme suffers only from the fading effect, the time shift of the sidebands has little influence on its transmission performance. The signal demodulated from the harmonic photocurrent shows a clear and open eye diagram and has good performance even if the transmission distance is very close to but not just at the fading nodes. The theoretical results are in good agreement with our numerical simulation.     

Influence of the modulation index of Mach-Zehnder modulator on RoF link with ASK millimeter-wave signal

In this paper, the influence of the modulation index of LiNbO₃ Mach-Zehnder modulator on the radio over fiber (RoF) link based on single sideband (SSB) optical millimeter (mm)-wave with ASK signal is theoretically and numerically investigated. Our investigation shows that there exists an optimal modulation index to generate the SSB optical mm-wave with a maximal RF photocurrent. Although the fiber dispersion distorts the code form and degrades the performance of the RF signal demodulated from the SSB optical mm-wave after fiber transmission, it does not cause the closure of the eye diagram. However, the influence of the fiber dispersion becomes more obvious as the modulation index increases. For the duplex RoF link with the optical carrier of the uplink recovered from the downlink, a larger modulation index of the downlink causes a worse crosstalk from the downlink to the uplink.     

The transmission performance of the single sideband optical millimeter-wave with BPSK signal in the duplex radio-over-fiber link

This paper has investigated the transmission performance of the single sideband (SSB) optical millimeter (mm)-wave with signal carried by the sideband in BPSK format in duplex radio-over-fiber (RoF) system theoretically and numerically. The SSB optical mm-wave signal is generated by a LiNbO₃ Mach–Zehnder modulator and there exists an optimal modulation index to generate the SSB optical mm-wave with a maximal RF photocurrent. The SSB optical mm-wave is much suitable for the duplex ROF link with the uplink lightwave recovered from the downlink because the optical carrier carries no signal. In such a duplex RoF link, although there are the spurs on the optical carrier, they have little influence on the downlink and the uplink signal even if the modulation index is large.     

Optical millimeter-wave signal generation by frequency quadrupling using one dual-drive Mach–Zehnder modulator to overcome chromatic dispersion

We propose a novel approach to generate quadrupling-frequency optical millimeter-wave using a dual-drive Mach–Zehnder modulator (MZM) in radio-over-fiber system. By properly adjusting the phase difference in the two modulation arms of MZM, the direct current (DC) bias, the modulation index and the gain of base-band signal, the quadrupling-frequency optical millimeter-wave with signal only carried by one second-order sideband is generated. As the signal is transmitted along the fiber, there is no time shift of the codes caused by chromatic dispersion. Theoretical analysis and simulation results show that the eye diagram keeps open and clear even when the quadrupling-frequency optical millimeter-wave are transmitted over 110 km and the power penalty is about 0.45 dB after fiber transmission distance of 60 km. Furthermore, due to another second-order sideband carrying no signals, a full duplex radio-over-fiber link based on wavelength reuse is also built to simplify the base station. The bidirectional 2.5 Gbit/s data is successfully transmitted over 40 km standard single mode fiber with less than 0.6 dB power penalty in the simulation.     

Optical single sideband-frequency generation with carrier totally suppressed for Brillouin distributed fiber sensing

The power fluctuation and multi-sidebands of the RF modulated electro-optic intensity modulator (EOIM) can lead to a degraded resolution of the Brillouin distributed sensors. A standard commercial fiber-pigtailed DFB-LD is locked to one of the sidebands of the EOIM. Optical single sideband-frequency generation is realized with the carrier and the other sidebands totally suppressed. The locked LD greatly improves the power stability of the injected sideband. No dc bias controlling to the EOIM is needed in the locking process. This simple method provides large tuning range (～1 GHz), fast response (～100 μs), and high side-frequency suppression ratio (～60 dB). Thus, it is practical for high-resolution Brillouin sensing systems as well as microwave photonics.     

A novel OCS millimeter-wave generation scheme with data carried only by one sideband and wavelength reuse for uplink connection

We propose a novel optical carrier suppression (OCS) millimeter-wave generation scheme with data carried only by one sideband using a dual-drive Mach–Zehnder modulator (MZM) in radio-over-fiber system, and the transmission performance is also investigated. As the signal is transmitted along the fiber, there is no time shifting of the codes caused by chromatic dispersion. Simulation results show that the eye diagram keeps open and clear even when the optical millimeter-waves are transmitted over 110 km and the power penalty is about 1.9 dB after fiber transmission distance of 60 km. Furthermore, due to the +1 order sideband carrying no data, a full duplex radio-over-fiber link based on wavelength reuse is also built to simplify the base station. The bidirectional 2.5 Gbit/s data is successfully transmitted over a 40 km standard single mode fiber with less than 0.8 dB power penalty in the simulation. Both theoretical analysis and simulation results show that our scheme is feasible and we can obtain a simple cost-efficient configuration and good performance over long-distance transmission.     

Millimetre-wave fibre–wireless transmission systems with reduced effects of fibre chromatic dispersion

This paper describes two techniques for the implementation of millimetre-wave (mm-wave) wireless communication systems incorporating optical fibre distribution networks. Fibre chromatic dispersion can exhibit severe effects on the transportation of mm-wave frequencies over fibre, resulting in greatly reduced post-detection rf powers. Each mm-wave fibre–wireless system demonstrated here incorporates a method for the generation and modulation of an optical mm-wave carrier, which enables the effect of fibre dispersion to be significantly reduced. One set-up is a direct-detection scheme where optical single-sideband (SSB) with carrier modulation is used to overcome fibre dispersion effects. The other system employs a self-heterodyne arrangement in which a dual-frequency optical source generates a low phase-noise mm-wave beat signal. Data transmission is achieved by externally modulating the dual-mode signal and reduced effects of fibre dispersion are observed.     

High speed ultra short pulse fiber ring laser using photonic crystal fiber nonlinear optical loop mirror

A scheme to generate high speed optical pulse train with ultra short pulse width is proposed and experimentally studied. Two-step compression is used in the scheme: 20 GHz and 40 GHz pulse trains generated from a rational harmonic actively mode-locked fiber ring laser is compressed to a full width at half-maximum (FWHM) of ~ 1.5 ps using adiabatic soliton compression with dispersion shifted fibers (DSF). The pulse trains then undergo a pedestal removal process by transmission through a cascaded two photonic crystal fiber (PCF)-nonlinear optical loop mirrors (NOLM) realized using a double-ring structure. The shortest output pulse width obtained was ~ 610 fs for 20 GHz pulse train and ~ 570 fs for 40 GHz pulse train. The signal to noise ratio of the RF spectrum of the output pulse train is larger than 30 dB. Theoretical simulation of the NOLM transmission is conducted using split-step Fourier method. The results show that two cascaded NOLMs can improve the compression result compared to that for a single NOLM transmission.     

Photon Generation Scheme of 32-Fold Millimeter-Wave Signal Based on Mach-Zehnder Modulator

This paper proposes a 32-tupling frequency millimeter-wave (MMW) filter-free system based on four Mach-Zehnder Modulators (MZM) connected in parallel and cascaded with a simple radio-fiber (RoF) link structure. The four MZMs are all at the maximum transmission point (MATP), and the radio frequency (RF) driving voltage phase difference between MZMs is π /2. The center carrier is suppressed by using an optical attenuator (OATT) and an optical phase shifter (OPS). Two parallel MZMs can generate ±8th order and ±12th order optical sidebands, and the ±4th order optical sidebands can be suppressed by adjusting the modulation index m of the MZM, using cascaded two dual-parallel MZMS(DPMZM) and the phase difference of the RF signal source is π/4 to generate ±16th order optical sidebands. The theoretical analysis and simulation experiments are performed for the scheme proposed in this paper. The results show that the simulated and theoretical values of the optical sideband suppression ratio (OSSR) for ±16th order optical sideband signals are 60.02 and 59.96 dB, respectively, and the simulated and theoretical values of the RF sideband suppression ratio (RFSSR) for the 32-tupling MMW signal are 56.34 and 53.94 dB, respectively.     

60 GHz millimeter-wave generator based on a frequency-quadrupling feed-forward modulation technique

We propose and analyze a prototype of a 60 GHz millimeter-wave (mm-wave) generator. In the scheme, two lasers with a 70 GHz frequency interval serve as sources. Then a frequency-quadrupling feed-forward modulation technique is employed to generate two phase correlated sidebands with a 60 GHz interval. The desired sidebands can be selected by using standard optical interleavers. In our work, a 60 GHz mm-wave signal free of phase noise can be achieved. The employed technique can also be extended to frequency 8-tupling.