One-step solvothermal preparation of TiO2/C composites and their visible-light photocatalytic activities

Preparation of anatase type titania nanoparticles and their carbon modification were synchronously achieved by the solvothermal method with glycerol as the carbon source. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and diffuse reflectance spectra (DRS). It was found that the glycerol/ethanol ratio affected significantly the morphology and properties of TiO₂/C composites. The TiO₂/C composite which was obtained in the solution with the glycerol/ethanol ratio of 5/75, contained 1.2 mass% carbon and exhibited both superior adsorption capability and visible-light photocatalytic activity. Contrary to this, samples prepared in the solution with higher glycerol/ethanol ratio, exhibited lower photocatalytic activity similar to that of the titania without carbon modification. It was suggested that excess addition of glycerol might contribute to large amounts of carbonaceous species and severe aggregation of the as-prepared samples, and thus reduced the surface area. As a result, the adsorption capability and visible-light photocatalytic activity increased at first and then decreased with the increase of glycerol addition. Present study provided a facile one-step method to obtain TiO₂/C composites with a controllable carbon content and photocatalytic performance under mild temperature.     

Photocatalytic activity and characterization of sol-gel-derived Cr(III)-doped TiO2-coated active carbon composites

Cr(III)-doped, TiO₂-coated active carbon (Cr–TiO₂/AC) were prepared by a sol–gel method. The effect of supports, including TiO₂ and active carbon (AC), on the molecular structure and photocatalytic activity of chromium oxide for complete decomposition of EDTA has been examined with respect to the content of Cr on the catalyst surface. The photocatalytic activity of the Cr–TiO₂/AC composites was evaluated in the decomposition of EDTA solution under UV irradiation. The results indicate that Cr–TiO₂/AC has a higher efficiency in decomposition of EDTA than TiO₂, TiO₂/AC or active carbon. This was attributed to the different functions of active carbon and chromate species. (1) Nanosize TiO₂ particles on composites were not reunited, possible because active carbon retards transformation of anatase into rutile and decreases the crystallite size. (2) Production of high concentrations of organic compound near Cr–TiO₂. (3) Carbon in active carbon causes some of the TiO₂ to reduce to Ti³⁺ ions, which prevents electron–hole pair recombination. (4) Formation of polychromate species, with a stronger redox capability, on the surface of TiO₂/AC. It was found that the addition of Cr to TiO₂ sol could suppress the grain growth of TiO₂ crystals and increase the hydroxyl content on the surface of TiO₂/AC. The photocatalytic efficiency and activity of the composites remained good, even after three cycles.     

Structural, photochemical and photocatalytic properties of zirconium oxide doped TiO2 nanocrystallites

Composite photocatalysts composed of TiO₂ and ZrO₂ have been prepared via the sol-gel method. The as-prepared nanocomposites are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-vis spectrometry and fluorescence emission spectra. The results shows that TiO₂/ZrO₂ nanocomposites are composed of mainly anatase titania and tetragonal ZrO₂. Incorporating TiO₂ particles with ZrO₂ plays an important role in promoting the formation of nanoparticles with an anatase structure and leads to decreased fluorescence emission intensity. Most of the TiO₂/ZrO₂ nanocomposites exhibited comparable photocatalytic activity compared with commercial TiO₂ for the degradation aqueous methyl orange (MO) under ultraviolet irradiation, while the composite with Zr/Ti mass ratio of 15.2% shows the highest photocatalytic performances. Furthermore, the as-prepared nanocomposites can be reused with little photocatalytic activity loss. Without any further treatment besides rinsing, the photocatalytic activity of TiO₂/ZrO₂ (15.2%) composites is still higher than after five-cycle utilization.     

Preparation of nanosized crystalline TiO2 particles at low temperature for photocatalysis

Nanocrystalline titanium dioxide (TiO₂) particles were prepared by a modified alkoxide method under acidic conditions at temperatures ranging from 60°C to 90°C. The reaction temperature was used to control the crystalline phase of the TiO₂ particles. At 60°C and 75°C rutile was formed whilst at 90°C anatase and brookite were formed.The photocatalytic activity of the prepared particles was tested for the degradation of sucrose. The photocatalytic activities of the prepared nanosized TiO₂ were compared to those obtained from Degussa P-25 TiO₂ as well as TiO₂ crystalline samples prepared using the conventional sol–gel/heat treatment method. At low organic concentrations, Degussa P-25 exhibited higher photocatalytic behaviour than all the prepared particles while, at high organic concentrations, the nanosized TiO₂ particles prepared at low temperature displayed an activity comparable to Degussa P-25 but much higher than the heat treated sample. The formation of excess intermediates during the degradation of higher sucrose loadings is believed to hinder the photoactivity of Degussa P-25, while the prepared TiO₂ particles are able to maintain their activity for the degradation of the intermediates of sucrose.     

Nanostructured carbon nanotube/TiO2 composite coatings using electrophoretic deposition (EPD)

Electrophoretic deposition (EPD) has been used to combine multi-walled carbon nanotubes of diameter in the range 20–30 nm and commercially available TiO₂ nanoparticles (23 nm particle size) in composite films. Laminate coatings with up to four layers were produced by sequential EPD, while composite coatings were obtained by electrophoretic co-deposition of carbon nanotubes and TiO₂ nanoparticles, respectively. Scanning electron microscopy was used to characterize the resultant microstructures. The mechanism of EPD of carbon nanotube/TiO₂ nanoparticle composites is discussed.     

Preparation and photocatalytic properties of silver nanoparticles loaded on CNTs/TiO2 composite

In this study, new nanoscale photocatalyst based on silver and CNTs/TiO₂ was successfully prepared by photoreduction method. The prepared Ag-CNTs/TiO₂ was characterized by TEM, XRD and XPS. The photocatalytic activity was also evaluated by photocatalytic degradation of Reactive Brilliant Red X-3B dye. The results indicated that the photocatalytic efficiency of CNTs/TiO₂ increased in the presence of Ag nanoparticles and the photocatalysis reaction followed a first order kinetics. The kinetic constant of Ag-CNTs/TiO₂ for dye degradation was nearly 1.2 times than that of CNTs/TiO₂, which indicated decorating Ag nanoparticles on CNTs/TiO₂ could enhance the photocatalytic ability.     

Properties of carbon and iron modified TiO2 photocatalyst synthesized at low temperature and photodegradation of acid orange 7 under visible light

The nanoparticles of TiO₂ modified with carbon and iron were synthesized by sol-gel followed solvothermal method at low temperature. Its chemical composition and optical absorption were investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), photoluminescence emission spectroscopy (PL), UV-vis absorption spectroscopy, and electron paramagnetic resonance (EPR). It was found that carbon and iron modification causes the absorption edge of TiO₂ to shift the visible light region. Fe(III) cation could be doped into the matrix of TiO₂, by which could hinder the recombination rate of excited electrons/holes. Superior photocatalytic activity of TiO₂ modified with carbon and iron was observed for the decomposition of acid orange 7 (AO7) under visible light irradiation. The synergistic effects of carbon and iron in modified TiO₂ nanoparticles were responsible for improving visible light photocatalytic activity.     

Nitrogen doped TiO2 nanoparticles decorated on graphene sheets for photocatalysis applications

Nitrogen doped TiO₂ nanoparticles decorated on graphene sheets are successfully synthesized by a low-temperature hydrothermal method. The resulting GR-N/TiO₂ composites are characterized by X-Ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-Ray photoelectron spectroscopy (XPS) and Transmission Electron Microscopy (TEM). The optical properties are studied using UV–visible diffuse reflectance spectroscopy (DRS), which confirms that the spectral responses of the composite catalysts are extended to the visible-light region and show a significant reduction in band gap energy from 3.18 to 2.64 eV. Photoluminescence emission spectra verify that GR-N/TiO₂ composites possess better charge separation capability than pure TiO₂. The photocatalytic activity is tested by degradation of methyl orange (MO) dye under visible light irradiation. The results demonstrate that GR-N/TiO₂ composites can effectively photodegrade MO, showing an impressive photocatalytic enhancement over pure TiO₂. The dramatically enhanced activity of composite photocatalysts can be attributed to great adsorption of dyes, enhanced visible light absorption and efficient charge separation and transfer processes. This work may provide new insights into the design of novel composite photocatalysts system with efficient visible light activity.     

Enhanced photocatalytic activity of TiO2 nano-structured thin film with a silver hierarchical configuration

TiO₂ sol-gels with various Ag/TiO₂ molar ratios from 0 to 0.9% were used to fabricate silver-modified nano-structured TiO₂ thin films using a layer-by-layer dip-coating (LLDC) technique. This technique allows obtaining TiO₂ nano-structured thin films with a silver hierarchical configuration. The coating of pure TiO₂ sol-gel and Ag-modified sol-gel was marked as T and A, respectively. According to the coating order and the nature of the TiO₂ sol-gel, four types of the TiO₂ thin films were constructed, and marked as AT (bottom layer was Ag modified, surface layer was pure TiO₂), TA (bottom layer was pure TiO₂, surface layer was Ag modified), TT (pure TiO₂ thin film) and AA (TiO₂ thin film was uniformly Ag modified). These thin films were characterized by means of linear sweep voltammetry (LSV), X-ray diffraction (XRD), scanning electron microscopy (SEM), electrochemical impedance spectroscopy and transient photocurrent (I_ph). LSV confirmed the existence of Ag⁰ state in the TiO₂ thin film. SEM and XRD experiments indicated that the sizes of the TiO₂ nanoparticles of the resulting films were in the order of TT > AT > TA > AA, suggesting the gradient Ag distribution in the films. The SEM and XRD results also confirmed that Ag had an inhibition effect on the size growth of anatase nanoparticles. Photocatalytic activities of the resulting thin films were also evaluated in the photocatalytic degradation process of methyl orange. The preliminary results demonstrated the sequence of the photocatalytic activity of the resulting films was AT > TA > AA > TT. This suggested that the silver hierarchical configuration can be used to improve the photocatalytic activity of TiO₂ thin film.     

Controlled Formation of TiO2/MoS2 Core–Shell Heterostructures with Enhanced Visible‐Light Photocatalytic Activities

Most recently, much attention has been devoted to photocatalytic materials that may help to solve the global energy crisis and may provide environmental protection. Herein, novel cocatalysts based on few layered MoS₂ and TiO₂ nanomaterials have been designed by growing MoS₂ nanosheets on the surface of TiO₂ nanospheres through a facile hydrothermal method. The method allows the formation of TiO₂/MoS₂ core–shell heterostructures of uniform morphologies and stable structure and provides a good control over shell thickness. The mechanism that forms these heterostructures is discussed in detail. In addition, as cocatalyst, MoS₂ nanosheets can enlarge the light harvesting window to include visible light and improve the photocatalytic ability of TiO₂. Using Rhodamine B as the model, the resultant heterostructure is demonstrated to possess excellent and stable photocatalytic activity in the degradation of organic pollutants under visible light illumination. The TiO₂/MoS₂ heterostructures possess this catalytic activity due to their large surface area and their excellent interface for separating holes and electrons. Therefore, this novel heterostructure nanomaterials possess potential applications in water treatment, degradation of dye pollutants, and environmental cleaning.     

A facile method to synthesize nitrogen and fluorine co-doped TiO2 nanoparticles by pyrolysis of (NH4)2TiF6

The nitrogen and fluorine co-doped TiO₂ (N-F-TiO₂) nanoparticles of anatase crystalline structure were prepared by a facile method of (NH₄)₂TiF₆ pyrolysis, and characterized by thermogravimetry-differential thermal analysis (TG-DTA), X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and ultraviolet visible (UV-Vis) spectroscopy etc. With the increase of calcination temperature, (NH₄)₂TiF₆ decomposed into TiOF₂ and NH₄TiOF₃ at first, and then formed anatase-type TiO₂ with thin sheet morphology. H₃BO₃ as oxygen source can promote the formation of anatase TiO₂, but decrease the F content in the N-F-TiO₂ materials due to the formation of volatile BF₃ during the precursor decomposition. The photocatalytic activity of the obtained N-F-TiO₂ samples was evaluated by the methylene blue degradation under visible light, and all the samples exhibited much higher photocatalytic activity than P25. Moreover, the merits and disadvantages of this proposed method to prepare doped TiO₂ are discussed.     

Synthesis and characterization of TiO2/Ag/polymer ternary nanoparticles via surface-initiated atom transfer radical polymerization

We report on the novel ternary hybrid materials consisting of semiconductor (TiO₂), metal (Ag) and polymer (poly(oxyethylene methacrylate) (POEM)). First, a hydrophilic polymer, i.e. POEM, was grafted from TiO₂ nanoparticles via the surface-initiated atom transfer radical polymerization (ATRP) technique. These TiO₂-POEM brush nanoparticles were used to template the formation of Ag nanoparticles by introduction of a AgCF₃SO₃ precursor and a NaBH₄ aqueous solution for reduction process. Successful grafting of polymeric chains from the surface of TiO₂ nanoparticles and the in situ formation of Ag nanoparticles within the polymeric chains were confirmed using transmission electron microscopy (TEM), UV-vis spectroscopy, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). FT-IR spectroscopy also revealed the specific interaction of Ag nanoparticles with the CO groups of POEM brushes. This study presents a simple route for the in situ synthesis of both metal and polymer confined within the semiconductor, producing ternary hybrid inorganic-organic nanomaterials.     

Sunlight photocatalytic activity of CdS modified TiO2 loaded on activated carbon fibers

To improve the photocatalytic application performances of TiO₂, in this work, firstly CdS modified Degussa P25 TiO₂ (CdS/TiO₂) composites were prepared by two methods, sol-gel method and precipitation method. Next they, sol-gel-CdS/TiO₂ (sg-CdS/TiO₂) and precipitation-CdS/TiO₂ (pp-CdS/TiO₂), were loaded on activated carbon fibers (ACFs) by dip-coating method using the sodium carboxymethyl cellulose as adhesives. The composites were characterized by XRD, UV-vis absorbance spectra, SEM, EDS and BET. The photocatalytic activities under sunlight were investigated by the degradation of methylene blue. The results showed that CdS/TiO₂ composites were mainly composed of anatase-TiO₂ and little CdS cubic phases. The absorption wavelengths of sg-CdS/TiO₂ and pp-CdS/TiO₂ composites were extended to 590 nm and 740 nm, respectively. The absorption edge had a pronounced ‘red shift’. From EDS analysis, the elemental contents of CdS/TiO₂ were mainly Ti and O and a small quantity of S and Cd. CdS/TiO₂ loaded on ACFs were in the form of small clusters, but not very uniform; compared with the original ACFs, the surface area and pore volume of CdS/TiO₂/ACFs decreased slightly, respectively, while the average pore diameter was not changed. The photodegradation rate of methylene blue under sunlight with CdS/TiO₂/ACFs composites was markedly higher than that of P25-TiO₂/ACFs, and the effect of pp-CdS/TiO₂/ACFs composites was better than that of sg-CdS/TiO₂/ACFs, when irradiated for 180 min, and the photodegradation rate of methylene blue reached to 90.1%. The photodegradation kinetics of the methylene blue fitted with the Langmuir-Hinshelwood equation. The apparent reaction rate constants of sg-CdS/TiO₂/ACFs and pp-CdS/TiO₂ were 0.0105 min⁻¹ and 0.0146 min⁻¹, respectively, which were about 1.3-1.7 times as large as that of P25-TiO₂/ACFs.     

Photocatalytic activity enhancement of Dy-doped TiO2 nanoparticles hybrid with TiO2 (B) nanobelts under UV and fluorescence irradiation

The main drawbacks of anatase titanium dioxide (TiO₂) nanoparticles for being used as a photocatalyst are due to the rapid charge recombination of the electron-hole pairs and the wide band gap energy, limiting its photocatalysis application. To enhance photocatalytic activity, structure modification was performed here. Heterogeneous nanostructure of Dy-doped TiO₂ nanoparticles hybrid with Monoclinic TiO₂ nanobelts (Dy/TNBs) was fabricated via hydrothermal method. Annealing temperature was varied to investigate its effect on phase composition and morphology of the as-prepared TiO₂ catalyst. Phase composition and morphology were studied by XRD and SEM, respectively. The effect of amount of catalyst loaded on the degradation efficiency of methylene blue (MB) dye in aqueous solution under UV and fluorescence illumination was investigated. The results showed that pure monoclinic TiO₂ nanobelts (TNBs) was achieved at 450 °C. Enhanced photocatalytic activity under both UV and fluorescence irradiation was found on Dy/TNB samples. The optimum Dy dosage providing the highest MB degradation rates under both irradiation sources was 0.1 mol%.     

从可溶性单源分子前驱体采用溶胶凝胶法制备ZnO/TiO2 纳米复合物

合成了单源分子前驱体Cl₂TiZn(dmae)₄ (dmae为2-二甲基乙醇胺),并以乙醇为溶剂,加入等摩尔量的水对其进行可控水解得ZnO/TiO₂纳米复合凝胶,经pH=9沉淀,在200、400和600 oC 烧结得到不同的产物T₂₀₀、T₄₀₀、T₆₀₀. XRD分析表明未烧结产物为无定形粉末并随着烧结温度升高晶型改善. ZnO呈纤锌矿结构(六方晶系),TiO₂呈板钛矿型结构(正交). BET分析和扫描电镜表明颗粒的大小随着烧结温度的提高而增加. 红外光谱证明Zn-O和Ti-O的特有的振动频率,OH基团烧结后的产物中被去掉. 所有的样品都显示良好的光催化活性, 且T₆₀₀活性最高.     

A robust super-paramagnetic TiO2:Fe3O4:Ag nanocomposite with enhanced photo and bio activities on polyester fabric via one step sonosynthesis

High intensity ultrasound was used for the synthesis and simultaneous deposition of TiO₂:Fe₃O₄:Ag nanocomposites on polyester surface providing a feasible route for imparting magnetic and enhanced antibacterial and self-cleaning activities with controllable hydrophilicity/hydrophobicity at low temperature. Synergistic impact of sonochemistry and physical effects of ultrasound originating from implosive collapse of bubbles were responsible for the formation and adsorption of nanomaterials on the fabric surface during ultrasound irradiation. The increase in photocatalytic activity of TiO₂ was obtained attributing to the co-operation of iron oxide and silver nanoparticles nucleated on TiO₂ surface boosting the electron–hole pair separation and prolonging their recombination rate. The process was further optimized in terms of reagents concentrations including Fe²⁺/TiO₂ and Ag/TiO₂ molar ratios using central composite design in order to achieve the best self-cleaning property of the treated fabric. The magnetic measurements indicated the super-paramagnetic behavior of the treated fabric with saturation magnetization of 4.5 (emu/g). Findings suggest the potential of the proposed facial method in producing an intelligent fabric with durable multi-functional activities that can be suitable for various applications including medical, military, bio-separation, bio-sensors, magneto graphic printing, magnetic screens and magnetic filters.     

Synergetic effects of hydrophilic surface modification and N-doping for visible light response on photocatalytic activity of TiO2

We made attempts to improve photocatalytic activity of TiO₂ nanoparticles under visible light exposure by combining additional treatments. N-doping of TiO₂ by ammonia gas treatment increased absorbance of visible light. By coating thin film of polydimethylsiloxane, and subsequently vacuum-annealing, TiO₂ surface became more hydrophilic, thereby enhancing photocatalytic activity of TiO₂. These two treatments were combined for the first time in this work and photocatalytic activity under visible light irradiation exceeded sum of individual effects of N-doping and hydrophilic modification.     

Inactivation of Pathogenic Microorganisms in the Photocatalytic Process on Nanosized TiO2 Crystals

The kinetics of the photocatalytic oxidation of E. coli gram-negative bacteria and the basic components of the cell wall membrane (LPS, PE, and PGN) on a porous film composed of TiO₂ nanoparticles was studied using frustrated total internal reflection FTIR spectroscopy. Structural changes in the cell wall membrane at the initial stage of cell oxidation were revealed. It was demonstrated that the cell’s organic material is photocatalytically oxidized in such a manner that the TiO₂ surface is cleaned. Laser photolysis experiments demonstrated that the organic material of the cell wall membrane reduces holes in the valence band of TiO₂.     

In situ Electron Microscopy Investigation of Fe(III)-doped TiO2 Nanoparticles in an Aqueous Environment

Three-dimensional networks of Fe(III)-doped TiO₂ nanoparticles (2–4 nm) prepared from organic precursors are detected by Cryo-TEM (transmission electron microscopy) in an aqueous environment. High-resolution TEM studies show that the nanoparticles prefer to align along their crystallographic orientation. A novel energy transfer mechanism is suggested in which these three-dimensional networks act as antenna systems thus leading to an enhanced photocatalytic activity of the colloidal preparations.     

Nanotitania-coated multi-walled carbon nanotube composite by facile colloidal processing route for photocatalytic applications

Multi-walled carbon nanotubes (MWCNTs) and titanium dioxide nanocomposites (MWCNTs/TiO₂) were fabricated by a simple novel colloidal processing route and tested as a photocatalyst for degradation of methylene blue under UV irradiation. The novel idea behind this work is to make MWCNTs and TiO₂ nanoparticle suspensions separately highly oppositely charged and utilize the electrostatic force of attraction between two entities to deposit nanotitania onto MWCNTs surface. Particle charge detector, scanning electron microscopy, transmission electron microscope, energy dispersive X-rays, X-rays diffraction (XRD), and Raman spectroscopy were used to characterize the composite. XRD and Raman spectroscopic analysis showed the crystalline structure of deposited TiO₂ over MWCNTs surface structure as anatase phase. It was found that MWCNTs/TiO₂ composite structure have much higher photocatalytic activity compared to TiO₂ nanoparticles. The composite material developed may find potential applications in the degradation of organic pollutants in aqueous medium under UV irradiation.