Observation of turbulent-driven shear flow in a cylindrical laboratory plasma device

An azimuthally symmetric radially sheared plasma fluid flow is observed to spontaneously form in a cylindrical magnetized helicon plasma device with no external sources of momentum input. A turbulent momentum conservation analysis shows that this shear flow is sustained by the Reynolds stress generated by collisional drift turbulence in the device. The results provide direct experimental support for the basic theoretical picture of drift-wave-shear-flow interactions.     

Contributions of different strengthening mechanisms to the shear strength of an extruded Mg–4Zn–0.5Ca alloy

The shear deformation behaviour of an extruded Mg–4Zn–0.5Ca alloy was studied using shear punch testing at room temperature. The extrusion process effectively refined the microstructure, leading to a grain size of 4.6 ± 1.4 μm. Contributions of different strengthening mechanisms to the room temperature shear yield stress, and overall flow stress of the material, were calculated. These mechanisms include dislocation strengthening, grain boundary strengthening, solid solution hardening and strengthening resulting from second-phase particles. Grain boundary strengthening and solid solution hardening made significant contributions to the overall strength of the material, while the contributions of second-phase particles and dislocations were trivial. The observed differences between calculated and experimental strength values were discussed based on the textural softening of the material.     

Influence of thickness and permeability of endothelial surface layer on transmission of shear stress in capillaries

The molecular coating on the surface of microvascular endothelium has been identified as a barrier to transvascular exchange of solutes. With a thickness of hundreds of nanometers, this endothelial surface layer(ESL) has been treated as a porous domain within which fluid shear stresses are dissipated and transmitted to the solid matrix to initiate mechanotransduction events. The present study aims to examine the effects of the ESL thickness and permeability on the transmission of shear stress throughout the ESL. Our results indicate that fluid shear stresses rapidly decrease to insignificant levels within a thin transition layer near the outer boundary of the ESL with a thickness on the order of ten nanometers. The thickness of the transition zone between free fluid and the porous layer was found to be proportional to the square root of the Darcy permeability. As the permeability is reduced ten-fold, the interfacial fluid and solid matrix shear stress gradients increase exponentially two-fold. While the interfacial fluid shear stress is positively related to the ESL thickness, the transmitted matrix stress is reduced by about 50% as the ESL thickness is decreased from 500 to 100 nm, which may occur under pathological conditions. Thus, thickness and permeability of the ESL are two main factors that determine flow features and the apportionment of shear stresses between the fluid and solid phases of the ESL. These results may shed light on the mechanisms of force transmission through the ESL and the pathological events caused by alterations in thickness and permeability of the ESL.     

多组分颗粒稠密气固两相流动的数值模拟

基于气体分子运动理论和颗粒动理学方法，建立多组分颗粒气固两相流等温流动模型。模型考虑了颗粒相各组分颗粒温度的差异、气相与颗粒相以及颗粒相各组分之间的动量和能量的传递和耗散，以及相间作用。建立颗粒相粘性系数、颗粒相压力等物性参数计算模型。模拟计算颗粒相浓度、粒径分布等参数与实测值相吻合。     

The inertial dynamics of thin film flow of non-Newtonian fluids

Consider the flow of a thin layer of non-Newtonian fluid over a solid surface. I model the case where the viscosity depends nonlinearly on the shear-rate; power law fluids are an important example, but the analysis here is for general nonlinear dependence. The modelling allows for large changes in film thickness provided the changes occur over a relatively large enough lateral length scale. Modifying the surface boundary condition for tangential stress forms an accessible foundation for the analysis where flow with constant shear is a neutral critical mode, in addition to a mode representing conservation of fluid. Perturbatively removing the modification then constructs a model for the coupled dynamics of the fluid depth and the lateral momentum. For example, the results model the dynamics of gravity currents of non-Newtonian fluids when the flow is not creeping.     

Self-regulation of E x B flow shear via plasma turbulence

The momentum balance has been applied to the ExB flow in the edge region of a reversed field pinch (RFP) configuration. All terms, including those involving fluctuations, have been measured in stationary condition in the edge region of the Extrap-T2R RFP experiment. It is found that the component of the Reynolds stress driven by electrostatic fluctuations is the term playing the major role in driving the shear of the ExB flow to a value marginal for turbulent suppression, so that the results are in favor of a turbulence self-regulating mechanism underlying the momentum balance at the edge. Balancing the sheared flow driving and damping terms, the plasma viscosity is found anomalous and consistent with the diffusivity due to electrostatic turbulence.     

毛细管内薄液膜轮廓和传热特性研究

本文认为毛细管的相变传热机理为液膜的导热和表面蒸发;表面蒸发受蒸汽温度、汽液界面的温度以及汽液压力差的共同控制。汽液流动机理为流动受脱离压力梯度、毛细力梯度支配。汽液相互作用机理为存在由于蒸发导致的动量转移切应力和由于汽液流速不同产生的摩擦切应力。提出的物理模型中较为全面地考虑了毛细管内传热、汽液流动及其相互作用。对毛细管半径和传热功率对薄液膜轮廓和传热特性影响程度的计算结果表明,随着毛细管半径的减小、传热功率的增大,蒸发界面区的长度会有所减小,这是针对微小空间得出的不同于常规情况的结论。     

强声波作用下煤颗粒周围气体的振荡流动特性

根据二维非稳态层流的质量和动量守恒方程,研究强声波作用下煤颗粒周围气体的振荡流动特性.入射波的振幅远大于颗粒特征长度,声雷诺数小于20.根据通用微分方程的解,详细分析不同声雷诺数与斯特劳哈尔数下,颗粒壁面的流场分布、轴向压力梯度、切向应力及分离角的分布,发现在低频（~50 Hz）时,颗粒壁面轴向压力梯度、切向应力及流动分离角的分布主要受曲率效应影响,其变化规律与振荡速度的幅值变化相对应;在高频时（~5 000 Hz）,颗粒壁面轴向压力梯度、切向应力及流动分离角的分布同时受到曲率效应和流动加速度的影响.为进一步研究强声波强化煤颗粒燃烧提供理论基础.     

Shear thickening of cornstarch suspensions as a reentrant jamming transition

We study the rheology of cornstarch suspensions, a non-Brownian particle system that exhibits shear thickening. From magnetic resonance imaging velocimetry and classical rheology it follows that as a function of the applied stress the suspension is first solid (yield stress), then liquid, and then solid again when it shear thickens. For the onset of thickening we find that the smaller the gap of the shear cell, the lower the shear rate at which thickening occurs. Shear thickening can then be interpreted as the consequence of dilatancy: the system under flow wants to dilate but instead undergoes a jamming transition because it is confined, as confirmed by measurement of the dilation of the suspension as a function of the shear rate.     

Unsteady MHD flow and heat transfer of fractional Maxwell viscoelastic nanofluid with Cattaneo heat flux and different particle shapes

The paper aims to investigate the unsteady natural convection flow and heat transfer of fractional Maxwell viscoelastic nanofluid in magnetic field over a vertical plate. The effect of nanoparticle shape is first introduced to the study of fractional Maxwell viscoelastic nanofluid. Fractional shear stress and Cattaneo heat flux model are applied to construct the governing boundary layer equations of momentum and energy, which are solved numerically. The quantities of physical interest are graphically presented and discussed in detail. It is found that particle shape and fractional derivative parameters have profound influence on the flow and heat transfer.     

具有多孔介质覆面层的柱体绕流流场分析

建立多孔结构覆面柱体绕流模型, 采用含Darcy-Brinkman-Forchheimer作用力项的格子Boltzmann方程对覆盖多孔介质层的方柱绕流进行数值模拟, 研究多孔介质对钝体绕流流场特性的影响。结果表明: 相比于不可渗透壁的柱体, 引入合适参数的多孔介质覆面层后可以有效降低其升力脉动幅值, 但阻力有所增加。同时, 较高雷诺数下多孔方柱的数值模拟表明: 多孔介质壁面使得尾迹区域的剪切层相距更远, 降低了尾流处湍动能, 并将雷诺应力的峰值移动到尾迹区域, 抑制了方柱两侧的动量交换, 使动量交换的位置发生在尾迹区域, 继而使得尾迹的涡街更加规则化。     

A fixed-mesh method for incompressible flow–structure systems with finite solid deformations

A fixed-mesh algorithm is proposed for simulating flow–structure interactions such as those occurring in biological systems, in which both the fluid and solid are incompressible and the solid deformations are large. Several of the well-known difficulties in simulating such flow–structure interactions are avoided by formulating a single set of equations of motion on a fixed Eulerian mesh. The solid’s deformation is tracked to compute elastic stresses by an overlapping Lagrangian mesh. In this way, the flow–structure interaction is formulated as a distributed body force and singular surface force acting on an otherwise purely fluid system. These forces, which depend on the solid elastic stress distribution, are computed on the Lagrangian mesh by a standard finite-element method and then transferred to the fixed Eulerian mesh, where the joint momentum and continuity equations are solved by a finite-difference method. The constitutive model for the solid can be quite general. For the force transfer, standard immersed-boundary and immersed-interface methods can be used and are demonstrated. We have also developed and demonstrated a new projection method that unifies the transfer of the surface and body forces in a way that exactly conserves momentum; the interface is still effectively sharp for this approach. The spatial convergence of the method is observed to be between first- and second-order, as in most immersed-boundary methods for membrane flows. The algorithm is demonstrated by the simulations of an advected elastic disk, a flexible leaflet in an oscillating flow, and a model of a swimming jellyfish.     

Lattice-Boltzmann Simulation of Particle Suspensions in Shear Flow

Inclusion of short-range particle–particle interactions for increased numerical stability in a lattice-Boltzmann code for particle-fluid suspensions, and handling of the particle phase for an effective implementation of the code for parallel computing, are discussed and formulated. In order to better understand the origin of the shear-thickening behavior observed in real suspensions, two simplified cases are considered with the code thus developed. A chain-like cluster of suspended particles is shown to increase the momentum transfer in a shear flow between channel walls, and thereby the effective viscosity of the suspension in comparison with random configurations of particles. A single suspended particle is also shown to increase the effective viscosity under shear flow of this simple suspension for particle Reynolds numbers above unity, due to inertial effects that change the flow configuration around the particle. These mechanisms are expected to carry over to large-scale particle-fluid suspensions.     

Experimental measurement of wall shear stress in strongly disrupted flows

Mean and fluctuating wall shear stress is measured in strongly disrupted cases generated by various low-porosity wall-mounted single- and multi-scale fences. These grids generate a highly turbulent wake which interacts with the wall-bounded flow modifying the wall shear stress properties. Measurement methods are validated first against a naturally growing zero pressure gradient turbulent boundary layer showing accuracies of 1% and 4% for extrapolation and direct measurement of the mean shear stress respectively. Uncertainty associated with the root mean square level of the fluctuations is better than 2% making it possible to measure small variations originating from the different fences. Additionally, probability density functions and spectra are also measured providing further insight into the flow physics. Measurement of shear stress in the disrupted cases (grid+TBL) suggest that the flow characteristics and turbulence mechanisms remain unaltered far from the grid even in the most disrupted cases. However, a different root mean square level of the fluctuations is found for different grids. Study of the probability density functions seem to imply that there are different degrees of interaction between the inner and outer regions of the flow.     

Angular momentum transport produced by shear flow driven drift waves in a collisional magnetoplasma

A shear flow instability in a nonuniform partially ionized magnetoplasma has been investigated and the angular momentum transport of charged particles caused by drift waves has been estimated. The angular momentum transport of the electrons and ions is not equal because the system is not conservative. The present investigation should help to understand the origin of fluctuations and associated parallel momentum transport of charged particles in nonuniform laboratory and astrophysical plasmas with sheared ion flow.     

Electromechanical noise in a diffusive conductor

Electrons moving in a conductor can transfer momentum to the lattice via collisions with impurities and boundaries, giving rise to a fluctuating mechanical stress tensor. The root-mean-squared momentum transfer per scattering event in a disordered metal (of dimension L greater than the mean-free path l and screening length xi) is found to be reduced below the Fermi momentum by a factor of order l/L for shear fluctuations and (xi/L)(2) for pressure fluctuations. The excitation of an elastic bending mode by the shear fluctuations is estimated to fall within current experimental sensitivity for a nanomechanical oscillator.     

纳米通道内气体剪切流动的分子动力学模拟

采用分子动力学模拟方法研究了表面力场对纳米通道内气体剪切流动的影响规律.结果显示通道内的气体流动分为两个区域:受壁面力场影响的近壁区域和不受壁面力场影响的主流区域.近壁区域内,气体流动特性和气体动力学理论预测差别很大,密度和速度急剧增大并出现峰值,正应力变化剧烈且各向异性,剪切应力在距壁面一个分子直径处出现突变.主流区域的气体流动特性与气体动力学理论预测相符合,该区域内的密度、正应力与剪切应力均为恒定值,速度分布亦符合应力-应变的线性响应关系.不同通道高度及密度下,近壁区域的归一化密度、速度及应力分布一致,表明近壁区域的气体流动特性仅由壁面力场所决定.随着壁面对气体分子势能作用的增强,气体分子在近壁区域的密度和速度随之增大,直至形成吸附层,导致速度滑移消失.通过剪切应力与切向动量适应系数(TMAC)的关系,得到不同壁面势能作用下的TMAC值,结果表明壁面对气体分子的势能作用越强,气体分子越容易在壁面发生漫反射.     

Dynamo quenching due to shear flow

We provide a theory of dynamo (alpha effect) and momentum transport in three-dimensional magnetohydrodynamics. For the first time, we show that the alpha effect is reduced by the shear even in the absence of magnetic field. The alpha effect is further suppressed by magnetic fields well below equipartition (with the large-scale flow) with different scalings depending on the relative strength of shear and magnetic field. The turbulent viscosity is also found to be significantly reduced by shear and magnetic fields, with positive value. These results suggest a crucial effect of shear and magnetic field on dynamo quenching and momentum transport reduction, with important implications for laboratory and astrophysical plasmas, in particular, for the dynamics of the Sun.     

Linear Stability of Taylor-Couette Flows with Axial Heat Buoyancy

The linear stability is studied of flows confined between two concentric cylinders, in which the radial temperature gradient and axial gravity are considered for an incompressible Newtonian fluid. Numerical method based on the Petrov-Galerkin scheme is developed to deal with the buoyancy term in momentum equations and an additional temperature perturbation equation. Computations of the neutral stability curves are performed for different rotation cases. It is found that the flow instability is influenced by both centrifugal and axial shear instabilities, and the two instability mechanisms interact with each other. The outer cylinder rotation plays dual roles of stabilizer and destabilizer under different rotating stages with the inner cylinder at rest. For the heat buoyancyinduced axial flow, spiral structures are found in the instability modes.     

Velocity,temperature, and Reynolds-stress scaling in the wall region of turbulent boundary layer on a permeable surface

A finite total number of flow parameters in the wall region of a turbulent boundary layer points to universal behavior of turbulent shear stress as a function of mean-velocity gradient and turbulent heat flux as a function of both mean-velocity and mean-temperature gradients. Combined with dimensional arguments, this fact is used to reduce the momentum and heat equations to first-order ordinary differential equations for temperature and velocity profiles amenable to general analysis. Scaling laws for velocity and temperature in boundary layer flows with transpiration are obtained as generalizations of well-known logarithmic laws. Scaling relations are also established for shear stress and rms transverse velocity fluctuation. The proposed method has substantial advantages as compared to the classical approach (which does not rely on fluid-dynamics equations [1–3]). It can be applied to establish scaling laws for a broader class of near-wall turbulence problems without invoking closure hypotheses.