金纳米粒子组装体系的表面增强拉曼光谱特性研究：表面粒子密度与？…

利用纳米粒子组装制备了金基底－－巯基苯胺自组装膜偶联层－－金纳米粒子的“三明治”结构,研究了表面粒子粒子密度与偶连层分子的拉曼光谱强度的关系。结果 偶连层分子的拉曼光谱有很好的增强效应,增强因子可达１０＾５。在表面粒子密度较低时,拉曼光谱强讧民表面粒子密度曲线呈线形,随着表面粒子密度的增加,曲线出现偏差并在粒子密度较高区域出现一个平台。     

金纳米粒子的图案化组装及表面增强拉曼光谱研究

利用聚苯乙烯纳米粒子有序组装结构为模板,进行了金纳米粒子的图案化组装。金纳米粒子在聚苯乙烯纳米粒子底部自组装聚集,形成规则的“面包圈”结构。表面增强拉曼光谱表明,相对于随机分布的金纳米粒子而言,金纳米粒子组装结构具有聚焦电磁场作用,从而使吸附的对巯基苯甲酸的拉曼散射得以进一步增强。     

两种纳米粒子的自组装及表面增强拉曼光谱研究

在氨基硅烷化的单晶硅片表面通过静电自组装技术组装上金和金核铂壳两种纳米粒子,通过改变基底浸泡在溶胶中的时间控制基底上纳米粒子的密度。用扫描电子显微镜(SEM)对基底表面上的形貌进行表征,结果表明纳米粒子呈亚单层二维阵列分布。以吡啶(Py)为探针分子,用波长为632.8 nm的激发光作为激发光源,研究纯金和金铂复合基底上的表面增强拉曼光谱(SERS)行为。数据显示在金纳米粒子之间引入金核铂壳纳米粒子后,Py的两个特征峰的频率没有明显变化,但谱峰的强度却变弱了,其SERS信号衰减最大可至原来的24%。这是由于引入的铂的d态电子使金的等离子体激发猝灭,从而破坏了电磁场增强,使金的SERS信号衰减。     

银纳米粒子阵列的自组装及其表面增强拉曼光谱应用

在以聚赖氨酸为表面耦联层分子的玻片基底制备了银纳米粒子阵列。ＳＥＭ表征结果表明,银粒子以亚单层的形式排列在基底表面。比较银溶胶和纳米粒子阵列的紫外可见光谱可见聚赖氨酸耦联层对银纳米粒子的粒径具有一定的选择性,甲基紫精在银纳米粒子阵列上的表面增强ＦＴ拉曼光谱表明在近红外区拉曼散射的表面增强主要来自于化学增强效应。     

偶联分子对金纳米粒子在玻片上组装的影响

将金纳米粒子组装在用3-氨基丙基-三乙氧基硅烷(APES)修饰的普通玻片上,再分别用偶联分子对巯基苯胺、1,4-二巯基苯在该基底上再次组装金纳米粒子,结果表明用对巯基苯胺作为组装的偶联分子得到双层金纳米粒子结构,对巯基苯胺的表面增强拉曼光谱信号得到增强,而用1,4-二巯基苯作为组装的偶联分子得到单层金纳米粒子结构。     

表面增强拉曼光谱快速检测尿液中的尿酸

表面增强拉曼光谱是一种表面灵敏度极高的“指纹”光谱技术,检测限可达单分子级别。它可以实现痕量物质的特异性识别及快速、无损检测,广泛应用于生命科学、电化学、环境安全等领域以及人们的日常生活中。通过种子生长法成功地实现了形貌均匀、尺寸可调的球形金纳米粒子的制备,并以此作为增强基底进一步探索其粒径对尿酸拉曼谱峰强度的影响。结果表明,金纳米粒子的尺寸显著影响其拉曼增强能力。在研究范围内,随着金纳米粒子尺寸的增加,其拉曼增强能力逐渐增加。在激光波长为638 nm时,150 nm的金纳米粒子具有最优的拉曼增强能力。这使得它们可适用于尿酸溶液的快速高灵敏度分析,检测限可达0.01 mmol·L-1。进一步的研究还表明,该方法可用于痕量尿酸的定量检测。在0.01～0.5 mmol·L-1范围内,尿酸的浓度与其特征拉曼峰640 cm-1处的峰强度之间呈线性关系,线性相关系数达0.98。将该方法用于真实样品(正常人体尿液)的快速检测,发现该方法不受尿液中其他成分的干扰,可以实现人体尿液中尿酸含量的快速测定。研究结果表明,以金纳米粒子作为基底的表面增强拉曼光谱方法可方便、快速地对尿液中尿酸的含量进行分析,极大地拓展了表面增强拉曼光谱在临床上的应用与研究。     

微波合成银包覆金纳米粒子膜的拉曼散射活性研究

采用微波加热加压法和静电吸附自组装法在石英玻璃表面制备了银包覆金纳米粒子薄膜,利用原子力显微镜分析了薄膜的表面形态和结构,测定结晶紫分子在薄膜表面的拉曼光谱。结果表明,银包覆金纳米粒子薄膜具有很强的表面增强拉曼散射效应(SERS)活性和稳定性。     

组装阵列中耦联剂对表面增强拉曼光谱的影响

利用自组装技术,将不同浓度比例的对巯基苯胺和N,N'-二苯基硫脲为功能耦联分子,在光滑银基底表面组装不同表面密度的二维银纳米粒子阵列。通过对组装阵列和粗糙银表面耦联剂分子的表面增强拉曼光谱比较,阵列中对巯基苯胺分子拉曼信号得到了明显的增强,但只有微弱的N,N'-二苯基硫脲的拉曼增强信号,说明在这种组装阵列中得到的拉曼散射增强主要来自于银纳米粒子和光滑银表面之间。     

银纳米粒子自组装复合LB膜的结构与性质

纳米粒子的自组装和有序组装膜的结构与性质近年来受到了人们的广泛关注,纳米粒子的表面结构与性质对由其组装成的有序膜的结构与性质有直接的影响。文章报道了利用自组装技术制备的银纳米粒子与双亲有机分子的单层和多层复合LB膜,通过吸收光谱和表面增强拉曼光谱研究了银纳米粒子与吸附分子间的相互作用,探讨了复合膜的成膜特性及银纳米粒子的拉曼增强特性。十八胺/银粒子复合LB膜的吸收光谱及拉曼光谱显示,十八胺分子与银纳米粒子表面的活位通过NH₂中的氮原子以复合体的形式结合;同时,在激发光的作用下复合体可能存在光催化过程。根据银粒子复合LB膜的实验结果,十八胺和十八酸之间的反应产物在复合膜中起空间位阻作用,与银粒子表面的相互作用较弱。     

溶液酸碱性对金纳米粒子在端基功能化单分子膜表面组装影响的SERS光谱研究

在4,4’-二硫联吡啶在Au表面形成自组装单分子层膜的基础上,采用表面增强拉曼散射光谱(SERS)研究了在不同pH值条件下金纳米粒子在4,4’-二硫联吡啶自组装单分子膜/Au体系表面的组装。研究结果表明,由于处于单分子膜表面的吡啶环中氮原子的质子化程度随溶液环境中pH值的变化而变化,使得金纳米粒子与单分子膜表面间的结合作用程度不同,由此会引起金纳米粒子在单分子膜表面的覆盖度存在差异,并最终导致所观测到的4-巯基吡啶自组装单分子膜的SERS光谱强度存在明显的差异。而且,令人感兴趣的是,所观测到的SERS谱峰强度随金纳米粒子组装时pH值的变化呈现出明显的规律性。结合分子结构特征的分析,初步阐明了SERS谱峰强度随pH值这一组装条件的改变而发生规律性变化的内在原因。     

金银复合体系表面增强拉曼光谱分离

采用传统自组装技术在硅片表面进行金银纳米粒子的复合组装.以吡啶为探针分子,利用金银在不同激发光线下增强效应的不同,研究了不同波长的激发光下纯金、银以及复合组装时体系的SERS效应.结果表明在金银同时组装时的增强效应强于金弱于银,同时还通过一系列校正以及差谱方法分离出金银共存时SERS中金的增强效应,并进行了相关分析,结果表明在金银同时组装的复合体系中,金银之间产生一定的耦合作用.     

The effect of underpotentially deposited Pb on the surface enhanced Raman scattering ability of polycrystalline Ag

The effect of submonolayer and monolayer amounts of Pb deposited at underpotential on a polycrystalline Ag electrode surface on the surface enhanced Raman scattering behavior of pyridine and Cl^? adsorbates is presented. Surfaces covered by greater than 70% of a Pb monolayer do not support significant surface enhancement. The changes observed in SERS intensity as a function of fractional Pb coverage are interpreted in terms of changes in surface electronic properties and changes in adsorbate coverage. Evidence for changes in the structure of the Pb overlayer is also presented. Investigation of the reversibility of the SERS behavior after deposition and quantitative stripping of varying amounts of Pb provides information on the roles played by various sizes of surface roughness in SERS. These data suggest that both large scale and atomic scale roughness contribute to the SERS intensities measured in these systems.     

Surface enhanced Raman spectroscopy of carbon nanostructures

Surface enhanced Raman scattering (SERS) of diamond nanocrystals and fullerene was investigated. Ag and Au films were used as SERS-active agent. In the first series of experiments SERS were prepared with sputtered island metals on the nanoparticles surfaces. In the second one the nanoparticles were positioned on silver surface using laser acceleration method. SERS is a powerful method to analyze the light accelerated nanoparticles patterning for their spatial distribution and structure. The enhancement in Raman spectral intensity of graphite-like phases and blinking effect are observed. Additional bands due to selective enhancement from cluster surface with different arrangement are generated. For SERS of diamond crystal phase as well as for fullerenes the characteristic shift and asymmetry of Raman bands are also observed. The investigation can be of interest both for the understanding of carbon nanostructures’ physics and for their applications, especially for bio-detection, as well as for the studying of SERS mechanism.     

Improved performances on surface‐enhanced Raman scattering based on electrochemically roughened gold substrates modified with SiO2 nanoparticles

In this work, we use electrochemical oxidation–reduction cycles (ORC) methods to prepare surface‐enhanced Raman scattering (SERS)‐active gold substrates modified with SiO₂ nanoparticles to improve the corresponding SERS performances. Based on the modified substrates, the SERS of Rhodamine 6G (R6G) exhibits a higher intensity by 3‐fold of magnitude, as compared with that of R6G adsorbed on a SERS‐active Au substrate without the modification of SiO₂ nanoparticles. Moreover, the SERS enhancement capabilities of the modified and the unmodified Au substrates are seriously destroyed at temperatures higher than 250 and 200 °C, respectively. These results indicate that the modification of SiO₂ nanoparticles can improve the thermal stability of SERS‐active substrates. The aging in SERS intensity is also depressed on this modified Au substrate due to the contribution of SiO₂ nanoparticles to SERS effects. Copyright © 2009 John Wiley & Sons, Ltd.     

Silver nanoparticle coverage dependence of surface-enhanced Raman scattering

We report surface-enhanced Raman scattering (SERS) from 4-mercaptopyridine adsorbed on nanotextured silver surfaces as the coverage of silver is varied. The degree of surface enhancement is strongly dependent on silver coverage and correlated to the extinction of the surface at the Raman excitation wavelength, that extinction being determined by multiparticle surface plasmon resonances. The coverage dependence of the Raman intensity is consistent with signals being dominated by molecules at junctions inside nanoparticle aggregates where electromagnetic energy is localized into “hot spots” by interactions of the incident and scattered fields with the surface plasmons. The Raman intensity drops precipitously near the conductivity percolation threshold because these hot spots are destroyed when conducting paths allow plasmons to propagate. Our approach to substrate preparation provides clean surfaces with average enhancements ≥10⁷, an order of magnitude larger than typical for SERS. PACS 78.67.-n; 78.68.+m; 33.20.Fb     

Controlling SERS intensity by tuning the size and height of a silver nanoparticle array

It is demonstrated that the surface-enhanced Raman scattering (SERS) intensity of R6G molecules adsorbed on a Ag nanoparticle array can be controlled by tuning the size and height of the nanoparticles. A firm Ag nanoparticle array was fabricated on glass substrate by using nanosphere lithography (NSL) combined with reactive ion etching (RIE). Different sizes of Ag nanoparticles were fabricated with seed polystyrene nanospheres ranging from 430 nm to 820 nm in diameter. By depositing different thicknesses of Ag film and lifting off nanospheres from the surface of the substrate, the height of the Ag nanoparticles can be tuned. It is observed that the SERS enhancement factor will increase when the size of the Ag nanoparticles decreases and the deposition thickness of the Ag film increases. An enhancement factor as high as 2×10⁶ can be achieved when the size of the polystyrene nanospheres is 430 nm in diameter and the height of the Ag nanoparticles is 96 nm. By using a confocal Raman mapping technique, we also demonstrate that the intensity of Raman scattering is enhanced due to the local surface plasmon resonance (LSPR) occurring in the Ag nanoparticle array.     

具有双共振吸收峰的Au纳米粒子制备及其拉曼表征

表面增强拉曼散射(SERS)很大程度的弥补了拉曼散射强度弱的缺点,迅速成为科研工作者们的研究热点,在食品安全、环境污染、毒品以及爆炸物检测等领域应用广泛。纳米技术的发展使得目前对于SERS的研究主要集中于金属纳米颗粒基底的制备,金属纳米粒子的种类、尺寸及形貌对SERS增强和吸收峰峰位均有影响,要获得好的增强效果,需要对金属纳米结构进行工艺优化。特别是,需要结合金属纳米粒子的结构和激励光波长,以期获得更好的增强效果。为了研究SERS增强和吸收峰之间的关系,开展了具有双共振吸收峰的金属纳米粒子的研究。首先利用FDTD Solutions仿真建模,主要针对金纳米颗粒直径、金纳米棒长径比及分布状态对共振吸收峰进行仿真,得到金纳米球理论直径在50 nm左右,金纳米棒理论长径比在3.5~4.5左右时,吸收峰分别分布在532及785 nm附近,符合多波段激励光拉曼增强条件;对于激励光偏振方向,其沿金纳米棒长轴方向偏振时吸收峰位于785 nm附近,沿金纳米球短轴方向偏振时吸收峰位于532 nm附近。然后采用种子生长法,制备了可用于多种波长激励光的双吸收峰表面增强拉曼散射基底。通过改变硝酸银用量(5,10,20,30和40 μL)、盐酸用量(0.1和0.2 mL)以及其生长时间(15,17,21和23 h)等多种工艺参数来控制金纳米棒含量,得到了同时含有金纳米球及金纳米棒的双吸收共振峰金纳米粒子。最后用该样品作为基底,罗丹明6G(R6G)作为探针分子,分别测试其在532,633和785 nm激励光入射时的SERS表征,对分析物R6G最低检测浓度均达到了10-7 mol·L-1,增强因子达到了~105,满足了多波段SERS检测的需要。     

Optical properties of Ag@cicada wing substrate deposited by Ag nanoparticles

In this paper, Ag nanoparticles were deposited on Ag@cicada wing array by using the cicada wings as templates to study its optical properties, including surface enhanced Raman scattering (SERS), polarization and surface enhanced fluorescence (SEF). The nanogaps between adjacent conical protrusion can be well dominated by adjusting the sputtering time and the optimal substrate AgNPs@Ag@cicada wing arrays have a noteworthy enhancement of SERS signal. Characterization of the prepared optimal substrate certified that it possesses the excellent SERS performances. Basically consistent SERS signal strength at the different polarization angles of the optimal substrate indicates that its polarization-independence. The SEF spectra shows that the optimal substrate has a slightly lower and unstable enhancement at this initial stage of repeated examination due to the weak adhesion between the Ag@cicada wing arrays and Ag nanoparticles. The outstanding optical properties indicate that it has enormous potential in the label-free detection and biological analytes determination.     

Surface‐enhanced Raman scattering study of the red dye laccaic acid

FT‐Raman and surface‐enhanced Raman scattering (SERS) spectroscopy were applied to the study of lac dye, a highly fluorescent anthraquinone red dye. The SERS spectra were obtained at different pH values, on Ag nanoparticles prepared by chemical reduction with citrate and hydroxylamine, and at several excitation wavelengths, in order to find the best experimental conditions for the detection of the lac dye. The lower detection limit was achieved using nanoparticles prepared by reduction with hydroxylamine, excitation at 514.5 nm, and slightly acidic pH conditions, thus exploiting a combination of factors including lower electrostatic repulsion between dye and nanoparticles and resonance Raman enhancement. A comparison between the adsorption of laccaic acid (LA) and carminic acid (CA), another anthraquinone red dye, was also done, based on the SERS spectra of both dyes. Copyright © 2007 John Wiley & Sons, Ltd.