Extended X‐ray absorption fine structure and multiple‐scattering simulation of nickel dithiolene complexes Ni[S2C2(CF3)2]2n (n = −2, −1, 0) and an olefin adduct Ni[S2C2(CF3)2]2(1‐hexene)

A series of Ni dithiolene complexes Ni[S₂C₂(CF₃)]₂ⁿ (n = ?2, ?1, 0) ( 1 , 2 , 3 ) and a 1‐hexene adduct Ni[S₂C₂(CF₃)₂]₂(C₆H₁₂) ( 4 ) have been examined by Ni K‐edge X‐ray absorption near‐edge structure (XANES) and extended X‐ray absorption fine‐structure (EXAFS) spectroscopies. Ni XANES for 1 – 3 reveals clear pre‐edge features and approximately +0.7 eV shift in the Ni K‐edge position for `one‐electron' oxidation. EXAFS simulation shows that the Ni—S bond distances for 1 , 2 and 3 (2.11–2.16 Å) are within the typical values for square planar complexes and decrease by ～0.022 Å for each `one‐electron' oxidation. The changes in Ni K‐edge energy positions and Ni—S distances are consistent with the `non‐innocent' character of the dithiolene ligand. The Ni—C interactions at ～3.0 Å are analyzed and the multiple‐scattering parameters are also determined, leading to a better simulation for the overall EXAFS spectra. The 1‐hexene adduct 4 presents no pre‐edge feature, and its Ni K‐edge position shifts by ?0.8 eV in comparison with its starting dithiolene complex 3 . Consistently, EXAFS also showed that the Ni—S distances in 4 elongate by ～0.046 Å in comparison with 3 . The evidence confirms that the neutral complex is `reduced' upon addition of olefin, presumably by olefin donating the π‐electron density to the LUMO of 3 as suggested by UV/visible spectroscopy in the literature.     

Extraction of local coordination structure in a low‐concentration uranyl system by XANES

Obtaining structural information of uranyl species at an atomic/molecular scale is a critical step to control and predict their physical and chemical properties. To obtain such information, experimental and theoretical L₃‐edge X‐ray absorption near‐edge structure (XANES) spectra of uranium were studied systematically for uranyl complexes. It was demonstrated that the bond lengths (R) in the uranyl species and relative energy positions (ΔE) of the XANES were determined as follows: ΔE₁ = 168.3/R(U—O_ax)² ? 38.5 (for the axial plane) and ΔE₂ = 428.4/R(U—O_eq)² ? 37.1 (for the equatorial plane). These formulae could be used to directly extract the distances between the uranium absorber and oxygen ligand atoms in the axial and equatorial planes of uranyl ions based on the U L₃‐edge XANES experimental data. In addition, the relative weights were estimated for each configuration derived from the water molecule and nitrate ligand based on the obtained average equatorial coordination bond lengths in a series of uranyl nitrate complexes with progressively varied nitrate concentrations. Results obtained from XANES analysis were identical to that from extended X‐ray absorption fine‐structure (EXAFS) analysis. XANES analysis is applicable to ubiquitous uranyl–ligand complexes, such as the uranyl–carbonate complex. Most importantly, the XANES research method could be extended to low‐concentration uranyl systems, as indicated by the results of the uranyl–amidoximate complex (～40 p.p.m. uranium). Quantitative XANES analysis, a reliable and straightforward method, provides a simplified approach applied to the structural chemistry of actinides.     

Relationship between the structural distortion and the Mn electronic state in La1−xCaxMnO3: a Mn K‐edge XANES study

A theoretical study of the X‐ray absorption near‐edge structure (XANES) spectra at the Mn K‐edge in the La_1?xCa_xMnO₃ series is reported. The relationship between the edge shift, the Ca–La substitution and the distortion of the MnO₆ octahedra in these systems has been studied. It is shown that, by correctly considering these effects simultaneously, the experimental XANES data are consistent with the presence of two different Mn local environments in the intermediate La_1?xCa_xMnO₃ compounds. By taking into account the energy shift associated with the modification of the MnO₆ distortion as Ca substitutes for La, it is possible to reproduce the XANES spectra of the intermediate‐doped compounds starting from the experimental spectra of the end‐members LaMnO₃ and CaMnO₃. These results point out the need to re‐examine the conclusions derived in the past from the simple analysis of the Mn K‐edge XANES edge‐shift in these materials. In particular, it is shown that the modification of the Mn K‐edge absorption through the La_1?xCa_xMnO₃ series is well reproduced by considering the simultaneous presence of both distorted and undistorted octahedra and, consequently, that the existence of charge‐ordering phenomena cannot be ruled out from the XANES data.     

Soft X‐ray absorption spectroscopy and resonant inelastic X‐ray scattering spectroscopy below 100 eV: probing first‐row transition‐metal M‐edges in chemical complexes

X‐ray absorption and scattering spectroscopies involving the 3d transition‐metal K‐ and L‐edges have a long history in studying inorganic and bioinorganic molecules. However, there have been very few studies using the M‐edges, which are below 100 eV. Synchrotron‐based X‐ray sources can have higher energy resolution at M‐edges. M‐edge X‐ray absorption spectroscopy (XAS) and resonant inelastic X‐ray scattering (RIXS) could therefore provide complementary information to K‐ and L‐edge spectroscopies. In this study, M_2,3‐edge XAS on several Co, Ni and Cu complexes are measured and their spectral information, such as chemical shifts and covalency effects, are analyzed and discussed. In addition, M_2,3‐edge RIXS on NiO, NiF₂ and two other covalent complexes have been performed and different d–d transition patterns have been observed. Although still preliminary, this work on 3d metal complexes demonstrates the potential to use M‐edge XAS and RIXS on more complicated 3d metal complexes in the future. The potential for using high‐sensitivity and high‐resolution superconducting tunnel junction X‐ray detectors below 100 eV is also illustrated and discussed.     

Operando QEXAFS studies of Ni2P during thiophene hydrodesulfurization: direct observation of Ni—S bond formation under reaction conditions

Structural changes in Ni₂P/MCM‐41 were followed by quick extended X‐ray absorption fine structure (QEXAFS) and were directly related to changes in X‐ray absorption near‐edge structure (XANES) which had been used earlier for the study of the active catalyst phase. An equation is proposed to correct the transient QEXAFS spectra up to second‐order in time to remove spectral distortions induced by structural changes occurring during measurements. A good correlation between the corrected QEXAFS and the XANES spectral changes was found, giving support to the conclusions derived from the XANES in the previous work, namely that the formation of a Ni—S bond in a surface NiPS phase is involved in the active site for the hydrodesulfurization reaction.     

Titanium local structure in tektite probed by X‐ray absorption fine structure spectroscopy

The local structure of titanium in tektites from six strewn fields was studied by Ti K‐edge X‐ray absorption near edge structure (XANES) and extended X‐ray absorption fine structure (EXAFS) in order to provide quantitative data on Ti—O distance and Ti coordination number. The titanium in tektites possessed different coordination environment types. XANES spectra patterns revealed resemblance to high‐temperature TiO₂–SiO₂ glass and TiO₂ anatase. All samples showed that the valence of Ti is 4+. Based on the Ti—O distances, coordination numbers and radial distribution function determined by EXAFS analyses, the tektites were classified into three types: type I, Ti occupies a four‐coordinated tetrahedral site with Ti—O distances of 1.84–1.79 Å; type II, Ti occupies a five‐coordinated trigonal bipyramidal or tetragonal pyramidal site with Ti—O distances of 1.92–1.89 Å; type III, Ti occupies a six‐coordinated octahedral site with Ti—O distances of 2.00–1.96 Å. Although Ti occupies the TiO₆ octahedral site in most titanium minerals under ambient conditions, some tektites have four‐ and five‐coordinated Ti. This study indicated that the local structure of Ti might change in impact events and the following stages.     

Reference spectra of important adsorbed organic and inorganic phosphate binding forms for soil P speciation using synchrotron‐based K‐edge XANES spectroscopy

Direct speciation of soil phosphorus (P) by linear combination fitting (LCF) of P K‐edge XANES spectra requires a standard set of spectra representing all major P species supposed to be present in the investigated soil. Here, available spectra of free‐ and cation‐bound inositol hexakisphosphate (IHP), representing organic P, and of Fe, Al and Ca phosphate minerals are supplemented with spectra of adsorbed P binding forms. First, various soil constituents assumed to be potentially relevant for P sorption were compared with respect to their retention efficiency for orthophosphate and IHP at P levels typical for soils. Then, P K‐edge XANES spectra for orthophosphate and IHP retained by the most relevant constituents were acquired. The spectra were compared with each other as well as with spectra of Ca, Al or Fe orthophosphate and IHP precipitates. Orthophosphate and IHP were retained particularly efficiently by ferrihydrite, boehmite, Al‐saturated montmorillonite and Al‐saturated soil organic matter (SOM), but far less efficiently by hematite, Ca‐saturated montmorillonite and Ca‐saturated SOM. P retention by dolomite was negligible. Calcite retained a large portion of the applied IHP, but no orthophosphate. The respective P K‐edge XANES spectra of orthophosphate and IHP adsorbed to ferrihydrite, boehmite, Al‐saturated montmorillonite and Al‐saturated SOM differ from each other. They also are different from the spectra of amorphous FePO₄, amorphous or crystalline AlPO₄, Ca phosphates and free IHP. Inclusion of reference spectra of orthophosphate as well as IHP adsorbed to P‐retaining soil minerals in addition to spectra of free or cation‐bound IHP, AlPO₄, FePO₄ and Ca phosphate minerals in linear combination fitting exercises results in improved fit quality and a more realistic soil P speciation. A standard set of P K‐edge XANES spectra of the most relevant adsorbed P binding forms in soils is presented.     

Solid energy calibration standards for P K‐edge XANES: electronic structure analysis of PPh4Br

P K‐edge X‐ray absorption near‐edge structure (XANES) spectroscopy is a powerful method for analyzing the electronic structure of organic and inorganic phosphorus compounds. Like all XANES experiments, P K‐edge XANES requires well defined and readily accessible calibration standards for energy referencing so that spectra collected at different beamlines or under different conditions can be compared. This is especially true for ligand K‐edge X‐ray absorption spectroscopy, which has well established energy calibration standards for Cl (Cs₂CuCl₄) and S (Na₂S₂O₃·5H₂O), but not neighboring P. This paper presents a review of common P K‐edge XANES energy calibration standards and analysis of PPh₄Br as a potential alternative. The P K‐edge XANES region of commercially available PPh₄Br revealed a single, highly resolved pre‐edge feature with a maximum at 2146.96 eV. PPh₄Br also showed no evidence of photodecomposition when repeatedly scanned over the course of several days. In contrast, we found that PPh₃ rapidly decomposes under identical conditions. Density functional theory calculations performed on PPh₃ and PPh₄⁺ revealed large differences in the molecular orbital energies that were ascribed to differences in the phosphorus oxidation state (III versus V) and molecular charge (neutral versus +1). Time‐dependent density functional theory calculations corroborated the experimental data and allowed the spectral features to be assigned. The first pre‐edge feature in the P K‐edge XANES spectrum of PPh₄Br was assigned to P 1s → P‐C π* transitions, whereas those at higher energy were P 1s → P‐C σ*. Overall, the analysis suggests that PPh₄Br is an excellent alternative to other solid energy calibration standards commonly used in P K‐edge XANES experiments.     

In situ X‐ray absorption spectroscopic studies of copper in a copper‐rich sludge during electrokinetic treatments

Speciation of copper in a copper‐rich chemical‐mechanical polishing sludge during electrokinetic treatment has been studied by in situ extended X‐ray absorption fine structure (EXAFS) and X‐ray absorption near‐edge structure (XANES) spectroscopy. The least‐squares‐fitted XANES spectra indicate that the main copper species in the sludge are Cu(OH)₂ (74%), nanosize CuO (20–60 nm) (13%) and CuO (>100 nm) (13%). The average bond distance and coordination number (CN) of Cu—O are 1.96 Å and 3.5, respectively. Under electrokinetic treatment (5 V cm^?1) for 120 min, about 85% of the copper is dissolved in the electrolyte, 13% of which is migrated and enriched on the cathode. Notably the copper nanoparticles in the sludge can also migrate to the cathode under the electric field. By in situ EXAFS, it is found that during the electrokinetic treatment the bond distance and CN of Cu—O are increased by 0.1 Å and 0.9, respectively.     

Electronic structure effects on B K‐edge XANES of minerals

In order to assess the usability of X‐ray absorption near‐edge structure (XANES) for studying the structure of BO_n‐containing materials, the dependence of theoretical XANES at the B K‐edge on the way the scattering potential is constructed is investigated. Real‐space multiple‐scattering calculations are performed for self‐consistent and non‐self‐consistent potentials and for different ways of dealing with the core hole. It is found that in order to reproduce the principal XANES features it is sufficient to use a non‐self‐consistent potential with a relaxed and screened core hole. Employing theoretical modelling of XANES for studying the structure of boron‐containing glasses is thus possible. The core hole affects the spectrum significantly, especially in the pre‐edge region. In contrast to minerals, B K‐edge XANES of BPO₄ can be reproduced only if a self‐consistent potential is employed.     

Phosphorus L2,3‐edge XANES: overview of reference compounds

Synchrotron‐based X‐ray absorption near‐edge structure (XANES) spectroscopy is becoming an increasingly used tool for the element speciation in complex samples. For phosphorus (P) almost all XANES measurements have been carried out at the K‐edge. The small number of distinctive features at the P K‐edge makes in some cases the identification of different P forms difficult or impossible. As indicated by a few previous studies, the P L_2,3‐edge spectra were richer in spectral features than those of the P K‐edge. However, experimentally consistent spectra of a wide range of reference compounds have not been published so far. In this study a library of spectral features is presented for a number of mineral P, organic P and P‐bearing minerals for fingerprinting identification. Furthermore, the effect of radiation damage is shown for three compounds and measures are proposed to reduce it. The spectra library provided lays a basis for the identification of individual P forms in samples of unknown composition for a variety of scientific areas.     

An unconventional method for measuring the Tc L3‐edge of technetium compounds

Tc L₃‐edge XANES spectra have been collected on powder samples of SrTcO₃ (octahedral Tc⁴⁺) and NH₄TcO₄ (tetrahedral Tc⁷⁺) immobilized in an epoxy resin. Features in the Tc L₃‐edge XANES spectra are compared with the pre‐edge feature of the Tc K‐edge as well as other 4d transition metal L₃‐edges. Evidence of crystal field splitting is obvious in the Tc L₃‐edge, which is sensitive to the coordination number and oxidation state of the Tc cation. The Tc L₃ absorption edge energy difference between SrTcO₃ (Tc⁴⁺) and NH₄TcO₄ (Tc⁷⁺) shows that the energy shift at the Tc L₃‐edge is an effective tool for studying changes in the oxidation states of technetium compounds. The Tc L₃‐edge spectra are compared with those obtained from Mo and Ru oxide standards with various oxidation states and coordination environments. Most importantly, fitting the Tc L₃‐edge to component peaks can provide direct evidence of crystal field splitting that cannot be obtained from the Tc K‐edge.     

K‐edge XANES analysis of sulfur compounds: an investigation of the relative intensities using internal calibration

Sulfur K‐edge XANES (X‐ray absorption near‐edge structure) spectroscopy is an excellent tool for determining the speciation of sulfur compounds in complex matrices. This paper presents a method to quantitatively determine the kinds of sulfur species in natural samples using internally calibrated reference spectra of model compounds. Owing to significant self‐absorption of formed fluorescence radiation in the sample itself the fluorescence signal displays a non‐linear correlation with the sulfur content over a wide concentration range. Self‐absorption is also a problem at low total absorption of the sample when the sulfur compounds are present as particles. The post‐edge intensity patterns of the sulfur K‐edge XANES spectra vary with the type of sulfur compound, with reducing sulfur compounds often having a higher post‐edge intensity than the oxidized forms. In dilute solutions (less than 0.3–0.5%) it is possible to use sulfur K‐edge XANES reference data for quantitative analysis of the contribution from different species. The results show that it is essential to use an internal calibration system when performing quantitative XANES analysis. Preparation of unknown samples must take both the total absorption and possible presence of self‐absorbing particles into consideration.     

Improved charge transfer multiplet method to simulate M‐ and L‐edge X‐ray absorption spectra of metal‐centered excited states

Charge transfer multiplet (CTM) theory is a computationally undemanding and highly mature method for simulating the soft X‐ray spectra of first‐row transition metal complexes. However, CTM theory has seldom been applied to the simulation of excited‐state spectra. In this article, the CTM4XAS software package is extended to simulate M_2,3‐ and L_2,3‐edge spectra for the excited states of first‐row transition metals and also interpret CTM eigenfunctions in terms of Russell–Saunders term symbols. These new programs are used to reinterpret the recently reported excited‐state M_2,3‐edge difference spectra of photogenerated ferrocenium cations and to propose alternative assignments for the electronic state of these cations responsible for the spectroscopic features. These new programs were also used to model the L_2,3‐edge spectra of Fe^II compounds during nuclear relaxation following photoinduced spin crossover and to propose spectroscopic signatures for their vibrationally hot states.     

Scanning transmission X‐ray microscopy probe for in situ mechanism study of graphene‐oxide‐based resistive random access memory

Here, an in situ probe for scanning transmission X‐ray microscopy (STXM) has been developed and applied to the study of the bipolar resistive switching (BRS) mechanism in an Al/graphene oxide (GO)/Al resistive random access memory (RRAM) device. To perform in situ STXM studies at the C K‐ and O K‐edges, both the RRAM junctions and the I₀ junction were fabricated on a single Si₃N₄ membrane to obtain local XANES spectra at these absorption edges with more delicate I₀ normalization. Using this probe combined with the synchrotron‐based STXM technique, it was possible to observe unique chemical changes involved in the BRS process of the Al/GO/Al RRAM device. Reversible oxidation and reduction of GO induced by the externally applied bias voltages were observed at the O K‐edge XANES feature located at 538.2 eV, which strongly supported the oxygen ion drift model that was recently proposed from ex situ transmission electron microscope studies.     

Investigation of annealing‐induced oxygen vacancies in the Co‐doped ZnO system by Co K‐edge XANES spectroscopy

To clarify the mechanism of the observed room‐temperature ferromagnetism (RTF), many studies have been focused on dilute magnetic semiconductor systems. Several investigations have demonstrated that oxygen vacancies play a significant role in mediating the RTF behavior so that much effort has been devoted to confirm their presence. In this investigation, X‐ray absorption spectroscopy was combined with ab initio calculations of the electronic structure of Co and Zn in the Zn_0.9Co_0.1O system before and after annealing, which has been recognized as an effective method of originating oxygen vacancies. A feature at about 20 eV after the rising edge of the Co K‐edge XANES that disappears after annealing has been associated with the presence of an oxygen vacancy located in the second shell surrounding the Co atom. Moreover, Zn K‐edge XANES spectra point out that this oxygen vacancy affects the electronic structure near the Fermi level, in agreement with density functional theory calculations.     

(Fe1-xNix)2P电子结构与磁学特性的X射线近边吸收谱研究

利用X射线近边吸收谱对Fe₂P,Ni₂P及其掺杂物(Fe_1-xNi_x)₂P(x=01,025,05)中Fe,Ni,P的K边进行了研究.结合多重散射理论近边计算,讨论了金属原子不同位置格点3f,3g对近边谱特征的贡献,得出当Ni原子取代Fe原子时将优先占据Fe(3f)格点位置;根据第一性原理对能态的计算发现,不考虑磁性时不同格点P的pDOS未占据态电子结构与P-K近边吸收谱实验相符合;与考虑铁磁性Fe₂P 的DOS相比较后结果显示Fe₂P的磁性主要来源于Fe(3g)格点,铁磁性Ni₂P计算的Ni不同格点原子磁矩均接近于0,与它一般显顺磁性结论相一致. 关键词： X射线近边吸收谱 电子结构 多重散射理论 态密度     

High‐accuracy X‐ray absorption spectra from mM solutions of nickel (II) complexes with multiple solutions using transmission XAS

A new approach is introduced for determining X‐ray absorption spectroscopy (XAS) spectra on absolute and relative scales using multiple solutions with different concentrations by the characterization and correction of experimental systematics. This hybrid technique is a development of standard X‐ray absorption fine structure (XAFS) along the lines of the high‐accuracy X‐ray extended range technique (XERT) but with applicability to solutions, dilute systems and cold cell environments. This methodology has been applied to determining absolute XAS of bis(N‐n‐propyl‐salicylaldiminato) nickel(II) and bis(N‐i‐propyl‐salicylaldiminato) nickel(II) complexes with square planar and tetrahedral structures in 15 mM and 1.5 mM dilute solutions. It is demonstrated that transmission XAS from dilute systems can provide excellent X‐ray absorption near‐edge structure (XANES) and XAFS spectra, and that transmission measurements can provide accurate measurement of subtle differences including coordination geometries. For the first time, (transmission) XAS of the isomers have been determined from low‐concentration solutions on an absolute scale with a 1–5% accuracy, and with relative precision of 0.1% to 0.2% in the active XANES and XAFS regions after inclusion of systematic corrections.     

Effect of gamma irradiation on X‐ray absorption and photoelectron spectroscopy of Nd‐doped phosphate glass

X‐ray absorption near‐edge structure (XANES) and X‐ray photoelectron spectroscopy (XPS) of Nd‐doped phosphate glasses have been studied before and after gamma irradiation. The intensity and the location of the white line peak of the L₃‐edge XANES of Nd are found to be dependent on the ratio O/Nd in the glass matrix. Gamma irradiation changes the elemental concentration of atoms in the glass matrix, which affects the peak intensity of the white line due to changes in the covalence of the chemical bonds with Nd atoms in the glass (structural changes). Sharpening of the Nd 3d_5/2 peak profile in XPS spectra indicates a deficiency of oxygen in the glasses after gamma irradiation, which is supported by energy‐dispersive X‐ray spectroscopy measurements. The ratio of non‐bridging oxygen to total oxygen in the glass after gamma radiation has been found to be correlated to the concentration of defects in the glass samples, which are responsible for its radiation resistance as well as for its coloration.     

Distribution and speciation of lead in model plant Arabidopsis thaliana by synchrotron radiation X‐ray fluorescence and absorption near edge structure spectrometry

To obtain reliable in situ information on the distribution and speciation of Pb in plants with low Pb content, special attention needs to be paid to the synchrotron radiation based micro‐X‐ray fluorescence and micro‐X‐ray absorption near edge structure (μ‐XANES) spectrometry to avoid specious results in the chosen XRF region of interest and speciation linear combination fitting. First, an Arabidopsis thaliana shoot cultured in a Pb solution is analyzed to obtain two‐dimensional Pb distribution graphs, where an overlap of Pb, As, Se, and Br lines in synchrotron radiation based micro‐X‐ray fluorescence spectra is found. To avoid this overlap, (1)As K‐L₃ and Pb L₃‐M₅, (2)As K‐M₃, (3)Pb L₂‐M₄, (4)Se K‐L₃, and (5)Br K‐M₃ lines should be chosen in the region of interest. The Pb content in the seed coat, root, and stem are 48.2, 17.3, and 5.8 times higher, respectively, than in the leaf, while the Pb content in the seed coat, root, stem, and leaf increased 3458, 1241, 420, and 72 times, respectively, compared with the A. thaliana sample without a Pb solution soak. Second, Pb speciation of the same shoot is analyzed using μ‐XANES. It is important to define a combination fitting range because different possible Pb combinations can emerge using different ranges. Different speciations were found in the root[Pb(Ac)₂ and PbSO₄], stem[Pb(Ac)₂ and Pb₃(PO₄)₂], leaf[Pb(OH)₂ and Pb₅Cl(PO₄)₃], and seed coat[Pb₃(PO₄)₂, Pb(OH)₂, and PbCO₃] between the fitting range of E₀ ? 20eV and E₀ + 70eV. A more complete Pb XANES database with more references, especially organic Pb compounds, is needed. Copyright © 2013 John Wiley & Sons, Ltd.